[Freeswitch-users] Can not make out going call from sangoma A200
James zhu
zhulizhong at live.com
Tue Aug 13 06:42:49 MSD 2013
hello:I made a test with Asterisk, wanpipe and dahdi. the both of outgoing and incoming calls worked. Only the problem is existing by using freeTDM and FreeSWITCH. Under freeTDMand FreeSWITCH, we can not make outing calls. the system logs show:2013-08-02 14:36:42.003531 [NOTICE] mod_freetdm.c:2273 Hangup FreeTDM/2:1/13811737925 [CS_CONSUME_MEDIA] [NORMAL_CIRCUIT_CONGESTION]freeswitch at internal> -------------------------------------------------------I think it should be a bug with freeTDM.
Best regards,
James.zhu
website: www.hiastar.com
From: zhulizhong at live.com
To: freeswitch-users at lists.freeswitch.org
Date: Wed, 7 Aug 2013 01:52:15 +0000
Subject: Re: [Freeswitch-users] Can not make out going call from sangoma A200
thanks for the support. this is log:013-08-02 14:36:36.943647 [DEBUG] switch_core_state_machine.c:471 (sofia/internal/1008 at 192.168.0.173) State ROUTING going to sleepfreeswitch at internal>
2013-08-02 14:36:36.943647 [DEBUG] switch_core_state_machine.c:416 (sofia/internal/1008 at 192.168.0.173) Running State Change CS_EXECUTEfreeswitch at internal>
2013-08-02 14:36:36.943647 [DEBUG] switch_core_state_machine.c:478 (sofia/internal/1008 at 192.168.0.173) State EXECUTEfreeswitch at internal>
2013-08-02 14:36:36.943647 [DEBUG] mod_sofia.c:230 sofia/internal/1008 at 192.168.0.173 SOFIA EXECUTEfreeswitch at internal>
2013-08-02 14:36:36.943647 [DEBUG] switch_core_state_machine.c:209 sofia/internal/1008 at 192.168.0.173 Standard EXECUTEfreeswitch at internal>
EXECUTE sofia/internal/1008 at 192.168.0.173 set(open=true)freeswitch at internal>
2013-08-02 14:36:36.943647 [DEBUG] mod_dptools.c:1393 sofia/internal/1008 at 192.168.0.173 SET [open]=[true]freeswitch at internal>
EXECUTE sofia/internal/1008 at 192.168.0.173 bridge(freetdm/2/1/13811737925)freeswitch at internal>
2013-08-02 14:36:36.943647 [DEBUG] switch_ivr_originate.c:2060 Parsing global variablesfreeswitch at internal>
2013-08-02 14:36:36.943647 [DEBUG] mod_freetdm.c:403 Set codec PCMA 20msfreeswitch at internal>
2013-08-02 14:36:36.943647 [DEBUG] mod_freetdm.c:1242 Connect outbound channel FreeTDM/2:1/13811737925freeswitch at internal>
2013-08-02 14:36:36.943647 [NOTICE] switch_channel.c:1030 New Channel FreeTDM/2:1/13811737925 [db274fb7-a395-4f29-8ff1-5a6634f01c56]freeswitch at internal>
2013-08-02 14:36:36.943647 [DEBUG] mod_freetdm.c:1251 (FreeTDM/2:1/13811737925) State Change CS_NEW -> CS_INITfreeswitch at internal>
2013-08-02 14:36:36.943647 [DEBUG] switch_core_session.c:1341 Send signal FreeTDM/2:1/13811737925 [BREAK]freeswitch at internal>
2013-08-02 14:36:36.943647 [DEBUG] mod_freetdm.c:1270 Attached session db274fb7-a395-4f29-8ff1-5a6634f01c56 to channel 2:1freeswitch at internal>
2013-08-02 14:36:36.943647 [DEBUG] ftmod_analog.c:62 [s2c1][1:3] Changed state from DOWN to DIALINGfreeswitch at internal>
2013-08-02 14:36:36.943647 [DEBUG] ftmod_analog.c:437 [s2c1][1:3] ANALOG CHANNEL thread starting.freeswitch at internal>
2013-08-02 14:36:36.943647 [DEBUG] ftdm_io.c:3381 [s2c1][1:3] Enabled software DTMF detectorfreeswitch at internal>
2013-08-02 14:36:36.943647 [DEBUG] ftmod_analog.c:457 [s2c1][1:3] Initialized DTMF detectionfreeswitch at internal>
2013-08-02 14:36:36.943647 [DEBUG] ftmod_analog.c:638 [s2c1][1:3] Completed state change from DOWN to DIALING in 1 msfreeswitch at internal>
2013-08-02 14:36:36.943647 [DEBUG] ftmod_analog.c:644 [s2c1][1:3] Executing state handler on 2:1 for DIALINGfreeswitch at internal>
2013-08-02 14:36:36.963647 [DEBUG] ftmod_wanpipe.c:1002 [s2c1][1:3] First packet read stats: Rx queue len: 0, Rx queue size: 10freeswitch at internal>
2013-08-02 14:36:37.443634 [DEBUG] switch_core_state_machine.c:416 (FreeTDM/2:1/13811737925) Running State Change CS_INITfreeswitch at internal>
2013-08-02 14:36:37.443634 [DEBUG] switch_core_state_machine.c:455 (FreeTDM/2:1/13811737925) State INITfreeswitch at internal>
2013-08-02 14:36:37.443634 [DEBUG] mod_freetdm.c:430 (FreeTDM/2:1/13811737925) State Change CS_INIT -> CS_ROUTINGfreeswitch at internal>
2013-08-02 14:36:37.443634 [DEBUG] switch_core_session.c:1341 Send signal FreeTDM/2:1/13811737925 [BREAK]freeswitch at internal>
2013-08-02 14:36:37.443634 [DEBUG] switch_core_state_machine.c:455 (FreeTDM/2:1/13811737925) State INIT going to sleepfreeswitch at internal>
2013-08-02 14:36:37.443634 [DEBUG] switch_core_state_machine.c:416 (FreeTDM/2:1/13811737925) Running State Change CS_ROUTINGfreeswitch at internal>
2013-08-02 14:36:37.443634 [DEBUG] switch_core_state_machine.c:471 (FreeTDM/2:1/13811737925) State ROUTINGfreeswitch at internal>
2013-08-02 14:36:37.443634 [DEBUG] mod_freetdm.c:453 FreeTDM/2:1/13811737925 CHANNEL ROUTINGfreeswitch at internal>
2013-08-02 14:36:37.443634 [DEBUG] switch_ivr_originate.c:67 (FreeTDM/2:1/13811737925) State Change CS_ROUTING -> CS_CONSUME_MEDIAfreeswitch at internal>
2013-08-02 14:36:37.443634 [DEBUG] switch_core_session.c:1341 Send signal FreeTDM/2:1/13811737925 [BREAK]freeswitch at internal>
2013-08-02 14:36:37.443634 [DEBUG] switch_core_state_machine.c:471 (FreeTDM/2:1/13811737925) State ROUTING going to sleepfreeswitch at internal>
2013-08-02 14:36:37.443634 [DEBUG] switch_core_state_machine.c:416 (FreeTDM/2:1/13811737925) Running State Change CS_CONSUME_MEDIAfreeswitch at internal>
2013-08-02 14:36:37.443634 [DEBUG] switch_core_state_machine.c:490 (FreeTDM/2:1/13811737925) State CONSUME_MEDIAfreeswitch at internal>
2013-08-02 14:36:37.443634 [DEBUG] switch_core_state_machine.c:490 (FreeTDM/2:1/13811737925) State CONSUME_MEDIA going to sleepfreeswitch at internal>
2013-08-02 14:36:41.963531 [DEBUG] ftmod_analog.c:503 [s2c1][1:3] Changed state from DIALING to BUSYfreeswitch at internal>
2013-08-02 14:36:41.983901 [DEBUG] ftmod_analog.c:638 [s2c1][1:3] Completed state change from DIALING to BUSY in 20 msfreeswitch at internal>
2013-08-02 14:36:41.983901 [DEBUG] ftmod_analog.c:644 [s2c1][1:3] Executing state handler on 2:1 for BUSYfreeswitch at internal>
2013-08-02 14:36:41.983901 [DEBUG] ftmod_analog.c:803 [s2c1][1:3] Changed state from BUSY to DOWNfreeswitch at internal>
2013-08-02 14:36:42.003531 [DEBUG] ftmod_analog.c:638 [s2c1][1:3] Completed state change from BUSY to DOWN in 20 msfreeswitch at internal>
2013-08-02 14:36:42.003531 [DEBUG] ftmod_analog.c:644 [s2c1][1:3] Executing state handler on 2:1 for DOWNfreeswitch at internal>
2013-08-02 14:36:42.003531 [DEBUG] mod_freetdm.c:2253 got FXO sig 2:1 [STOP]freeswitch at internal>
2013-08-02 14:36:42.003531 [NOTICE] mod_freetdm.c:2273 Hangup FreeTDM/2:1/13811737925 [CS_CONSUME_MEDIA] [NORMAL_CIRCUIT_CONGESTION]freeswitch at internal>
2013-08-02 14:36:42.003531 [DEBUG] switch_channel.c:3135 Send signal FreeTDM/2:1/13811737925 [KILL]freeswitch at internal>
2013-08-02 14:36:42.003531 [DEBUG] switch_core_session.c:1341 Send signal FreeTDM/2:1/13811737925 [BREAK]freeswitch at internal>
freeswitch at internal> -----------------------------------------------------------------------the port is working for inbound calls.
Best regards,
James.zhu
website: www.hiastar.com
From: zhulizhong at live.com
To: freeswitch-users at lists.freeswitch.org
Date: Tue, 6 Aug 2013 06:42:14 +0000
Subject: Re: [Freeswitch-users] Can not make out going call from sangoma A200
hello:I contacted Sangoma, but I do not have any feedback yet. I think it might be a bugfor analog card with freeSWITCH. freetdm partially works with sangoma A200. There are two issues:1) Can not get callerid from IO: only shows this:Initializing cid data! the callerid is emptyeven I set to CN.2) Can not make outgoing calls by the port that I used to make outgoing calls. even I replaced a FXO module, the problem is same. I use same syntax as follow:http://blog.hiastar.com/?p=276 Hope someone from the FreeSWITCH community to clarify that.
Best regards,
James.zhu
website: www.hiastar.com
Date: Fri, 2 Aug 2013 23:03:47 -0400
From: bdfoster at davri.com
To: freeswitch-users at lists.freeswitch.org
Subject: Re: [Freeswitch-users] Can not make out going call from sangoma A200
I apologize, I misread your email. Hopefully someone who knows FreeTDM will come around. Have you contacted Sangoma? They are the maintainers of FreeTDM as far as I know. You might try that route. They are very familiar with freeswitch im sure :).
Thank you,
Brian Foster
Project Manager/Owner's Rep.
Davri Investments, Inc.
O: 317-787-2686 x2102
M: 317-600-9753
E: bdfoster at davri.com
Indianapolis, Indiana
Sent from a mobile device.
On Aug 2, 2013 10:39 PM, "James zhu" <zhulizhong at live.com> wrote:
thanks, Brian. actually the 2:1 is idle because the port can accept incoming call. afterI reload freetdm or restart FS, I still can not make outgoing calls. If the port physicallyfailed, how come I can make incoming call use the same port. confused. thanks again.
Best regards,
James.zhu
website: www.hiastar.com
Date: Fri, 2 Aug 2013 14:22:29 -0400
From: bdfoster at davri.com
To: freeswitch-users at lists.freeswitch.org
Subject: Re: [Freeswitch-users] Can not make out going call from sangoma A200
That's the expected behavior if 2:1 is in use. So that means you use another port to place your outbound call. Tips on how to do that, however, I can't really produce. Hopefully someone with more experience with FreeTDM can chime in.
Thank you,
Brian Foster
Project Manager/Owner's Rep.
Davri Investments, Inc.
O: 317-787-2686 x2102
M: 317-600-9753
E: bdfoster at davri.com
Indianapolis, Indiana
Sent from a mobile device.
On Aug 2, 2013 3:09 AM, "James zhu" <zhulizhong at live.com> wrote:
hello:I installed freeswitch and sangoma A200 with 2 FXOs. i set the tone group to CNand opermode=china. the A200 can make accept incoming calls from FreeTDM/2:1 , but I use same port to make out going port, the shows the port is CONGESTION.
--------------------------system log-----------------------------------------------2013-08-02 14:36:42.003531 [DEBUG] mod_freetdm.c:640 [2:1] FreeTDM/2:1/13811737925 CHANNEL HANGUP EXIT
2013-08-02 14:36:42.003531 [DEBUG] switch_core_state_machine.c:48 FreeTDM/2:1/13811737925 Standard HANGUP, cause: NORMAL_CIRCUIT_CONGESTION2013-08-02 14:36:42.003531 [DEBUG] switch_core_state_machine.c:679 (FreeTDM/2:1/13811737925) State HANGUP going to sleep
2013-08-02 14:36:42.003531 [DEBUG] switch_core_state_machine.c:692 (FreeTDM/2:1/13811737925) Callstate Change DOWN -> HANGUP2013-08-02 14:36:42.003531 [DEBUG] switch_core_state_machine.c:447 (FreeTDM/2:1/13811737925) State Change CS_HANGUP -> CS_REPORTING
2013-08-02 14:36:42.003531 [DEBUG] switch_core_session.c:1341 Send signal FreeTDM/2:1/13811737925 [BREAK]2013-08-02 14:36:42.003531 [DEBUG] switch_core_state_machine.c:416 (FreeTDM/2:1/13811737925) Running State Change CS_REPORTING
2013-08-02 14:36:42.003531 [DEBUG] switch_core_state_machine.c:764 (FreeTDM/2:1/13811737925) State REPORTING2013-08-02 14:36:42.003531 [DEBUG] switch_core_state_machine.c:92 FreeTDM/2:1/13811737925 Standard REPORTING, cause: NORMAL_CIRCUIT_CONGESTION
2013-08-02 14:36:42.003531 [DEBUG] switch_core_state_machine.c:764 (FreeTDM/2:1/13811737925) State REPORTING going to sleep2013-08-02 14:36:42.003531 [DEBUG] switch_core_state_machine.c:441 (FreeTDM/2:1/13811737925) State Change CS_REPORTING -> CS_DESTROY
2013-08-02 14:36:42.003531 [DEBUG] switch_core_session.c:1341 Send signal FreeTDM/2:1/13811737925 [BREAK]2013-08-02 14:36:42.003531 [DEBUG] switch_core_session.c:1549 Session 37 (FreeTDM/2:1/13811737925) Locked, Waiting on external entities
2013-08-02 14:36:42.023531 [DEBUG] switch_ivr_originate.c:3632 Originate Resulted in Error Cause: 34 [NORMAL_CIRCUIT_CONGESTION]2013-08-02 14:36:42.023531 [INFO] mod_dptools.c:3192 Originate Failed. Cause: NORMAL_CIRCUIT_CONGESTION
2013-08-02 14:36:42.023531 [NOTICE] switch_channel.c:4593 Hangup sofia/internal/1008 at 192.168.0.173 [CS_EXECUTE] [NORMAL_CIRCUIT_CONGESTION]2013-08-02 14:36:42.023531 [DEBUG] switch_channel.c:3135 Send signal sofia/internal/1008 at 192.168.0.173 [KILL]
2013-08-02 14:36:42.023531 [DEBUG] switch_core_session.c:1341 Send signal sofia/internal---------------------------------------------the FS is download from git and wanpipe is latest version. please give a help for that issue.
Best regards,
James.zhu
website: www.hiastar.com
_________________________________________________________________________
Professional FreeSWITCH Consulting Services:
consulting at freeswitch.org
http://www.freeswitchsolutions.com
Official FreeSWITCH Sites
http://www.freeswitch.org
http://wiki.freeswitch.org
http://www.cluecon.com
FreeSWITCH-users mailing list
FreeSWITCH-users at lists.freeswitch.org
http://lists.freeswitch.org/mailman/listinfo/freeswitch-users
UNSUBSCRIBE:http://lists.freeswitch.org/mailman/options/freeswitch-users
http://www.freeswitch.org
_________________________________________________________________________
Professional FreeSWITCH Consulting Services:
consulting at freeswitch.org
http://www.freeswitchsolutions.com
Official FreeSWITCH Sites
http://www.freeswitch.org
http://wiki.freeswitch.org
http://www.cluecon.com
FreeSWITCH-users mailing list
FreeSWITCH-users at lists.freeswitch.org
http://lists.freeswitch.org/mailman/listinfo/freeswitch-users
UNSUBSCRIBE:http://lists.freeswitch.org/mailman/options/freeswitch-users
http://www.freeswitch.org
_________________________________________________________________________
Professional FreeSWITCH Consulting Services:
consulting at freeswitch.org
http://www.freeswitchsolutions.com
Official FreeSWITCH Sites
http://www.freeswitch.org
http://wiki.freeswitch.org
http://www.cluecon.com
FreeSWITCH-users mailing list
FreeSWITCH-users at lists.freeswitch.org
http://lists.freeswitch.org/mailman/listinfo/freeswitch-users
UNSUBSCRIBE:http://lists.freeswitch.org/mailman/options/freeswitch-users
http://www.freeswitch.org
_________________________________________________________________________
Professional FreeSWITCH Consulting Services:
consulting at freeswitch.org
http://www.freeswitchsolutions.com
Official FreeSWITCH Sites
http://www.freeswitch.org
http://wiki.freeswitch.org
http://www.cluecon.com
FreeSWITCH-users mailing list
FreeSWITCH-users at lists.freeswitch.org
http://lists.freeswitch.org/mailman/listinfo/freeswitch-users
UNSUBSCRIBE:http://lists.freeswitch.org/mailman/options/freeswitch-users
http://www.freeswitch.org
_________________________________________________________________________
Professional FreeSWITCH Consulting Services:
consulting at freeswitch.org
http://www.freeswitchsolutions.com
Official FreeSWITCH Sites
http://www.freeswitch.org
http://wiki.freeswitch.org
http://www.cluecon.com
FreeSWITCH-users mailing list
FreeSWITCH-users at lists.freeswitch.org
http://lists.freeswitch.org/mailman/listinfo/freeswitch-users
UNSUBSCRIBE:http://lists.freeswitch.org/mailman/options/freeswitch-users
http://www.freeswitch.org
_________________________________________________________________________
Professional FreeSWITCH Consulting Services:
consulting at freeswitch.org
http://www.freeswitchsolutions.com
Official FreeSWITCH Sites
http://www.freeswitch.org
http://wiki.freeswitch.org
http://www.cluecon.com
FreeSWITCH-users mailing list
FreeSWITCH-users at lists.freeswitch.org
http://lists.freeswitch.org/mailman/listinfo/freeswitch-users
UNSUBSCRIBE:http://lists.freeswitch.org/mailman/options/freeswitch-users
http://www.freeswitch.org
-------------- next part --------------
An HTML attachment was scrubbed...
URL: http://lists.freeswitch.org/pipermail/freeswitch-users/attachments/20130813/de61cdc5/attachment-0001.html
Join us at ClueCon 2013 Aug 6-8, 2013
More information about the FreeSWITCH-users
mailing list