[Freeswitch-users] Sangoma Card Originate Not Working on Forwarded Call Numbers
Anita Hall
anita.hall at simmortel.com
Thu Mar 8 22:10:39 MSK 2012
Hi Stephen
Thanks a TON, pun unintended :)
I tried setting the TON to 2 or 4 and NPI to 1 and on Q.931 trace it shows
that the numbering type and plan have been set correctly. However, it still
show the same UNALLOCATED_NUMBER hangup cause.
I have attached the pcap trace of an incoming call which then sets the
channel variables as given on the link you shared and bridges a call to the
said number 07305880719 . The reason why I have to do this is because I
could not figure out how to set these profile variables from the originate
command, so I set them up in the dialplan.
This number 07305880719 is valid, I am able to call it from my mobile and
also from another card + freeswitch
I suspected that the issue could be with sangoma isdn library, so I tried
with libpri instead. Even with correct TON and NPI, the call is not being
set-up.
Could this be an issue with my PRI line or Sangoma card itself ?
regards,
Anita
On Tue, Mar 6, 2012 at 1:58 AM, Stephen Wilde <wstephen80 at gmail.com> wrote:
> In your log I see an "UNALLOCATED_NUMBER" release cause.
> If the number is ok, this can be due to the ISDN numbering plan/number
> type of the called party.
> What are required by your isdn provider?
> You can try with different parameters (for your called number I think that
> you have to specify numbering plan=ISDN and number type=National).
> These parameter can be specified in profile or dialplan.
>
> http://wiki.sangoma.com/wanpipe-freeswitch-config-appendix#ton-npi-per-call
>
> Stephen
>
>
> On Mon, Mar 5, 2012 at 7:55 PM, Anita Hall <anita.hall at simmortel.com>wrote:
>
>> Thanks John.
>>
>> I could take a pcap trace using
>> wanpipemon -i w4g1 -pcap -pcap_file sng_isdn_fwd.pc -prot ISDN -full
>> -systime -c trd
>>
>> The q931 for a call which is not maturing is as follows. This is the case
>> when the called number is set to unconditional forwarding.
>> 3 6.057463 Local User Remote Network Q.931 SETUP
>> 5 6.142822 Remote Network Local User Q.931 CALL PROCEEDING
>> 7 Remote Network Local User Q.931 DISCONNECT
>> 9 Local User Remote Network Q.931 RELEASE
>> 11 Remote Network Local User Q.931 RELEASE COMPLETE
>>
>> This happens only with Sangoma Card. I am using the sangoma_isdn stack
>> and FreeTDM. Somehow, it is not able to understand that the call is
>> getting forwarded.
>>
>> The q931 for a call which is maturing is as follows
>> 11 Local User Remote Network Q.931 SETUP
>> 13 Remote Network Local User Q.931 CALL PROCEEDING
>> 15 Remote Network Local User Q.931 ALERTING
>> 17 Remote Network Local User Q.931 CONNECT
>> 23 Remote Network Local User Q.931 DISCONNECT
>> 25 Local User Remote Network Q.931 RELEASE
>> 27 Remote Network Local User Q.931 RELEASE COMPLETE
>>
>>
>>
>> regards,
>> Anita
>>
>>
>>
>>
>> On Mon, Mar 5, 2012 at 11:57 PM, John <freeswitch at earthspike.net> wrote:
>>
>>> On 05/03/12 16:31, Anita Hall wrote:
>>> > Hi
>>> >
>>> > There are some numbers on which I am not able to originate calls from
>>> > a Sangoma Card, while I am able to do the same from a Digium like
>>> > card. I am using FreeTDM.
>>> >
>>> > >originate freetdm/4/a/07305880672 &park()
>>> >
>>> > Log is here http://pastebin.freeswitch.org/18578
>>> >
>>> > Note that I am able to call other numbers from this system and I have
>>> > a working PRI line and FreeTDM.
>>> >
>>> > Also the number 07305880672 is working fine. It unconditionally
>>> > forwards the call to another number. I am problem with calling all
>>> > such numbers.
>>> >
>>> > I am able to do q931 traces using sangoma_isdn but how to view them ?
>>> >
>>> > regards,
>>> > Anita
>>> >
>>> Anita,
>>>
>>> You can use wireshark to decode the q.931 traces; the output files are
>>> .pcap format.
>>>
>>> John
>>>
>>> _________________________________________________________________________
>>> Professional FreeSWITCH Consulting Services:
>>> consulting at freeswitch.org
>>> http://www.freeswitchsolutions.com
>>>
>>>
>>>
>>>
>>> Official FreeSWITCH Sites
>>> http://www.freeswitch.org
>>> http://wiki.freeswitch.org
>>> http://www.cluecon.com
>>>
>>> FreeSWITCH-users mailing list
>>> FreeSWITCH-users at lists.freeswitch.org
>>> http://lists.freeswitch.org/mailman/listinfo/freeswitch-users
>>> UNSUBSCRIBE:http://lists.freeswitch.org/mailman/options/freeswitch-users
>>> http://www.freeswitch.org
>>>
>>
>>
>> _________________________________________________________________________
>> Professional FreeSWITCH Consulting Services:
>> consulting at freeswitch.org
>> http://www.freeswitchsolutions.com
>>
>>
>>
>>
>> Official FreeSWITCH Sites
>> http://www.freeswitch.org
>> http://wiki.freeswitch.org
>> http://www.cluecon.com
>>
>> FreeSWITCH-users mailing list
>> FreeSWITCH-users at lists.freeswitch.org
>> http://lists.freeswitch.org/mailman/listinfo/freeswitch-users
>> UNSUBSCRIBE:http://lists.freeswitch.org/mailman/options/freeswitch-users
>> http://www.freeswitch.org
>>
>>
>
> _________________________________________________________________________
> Professional FreeSWITCH Consulting Services:
> consulting at freeswitch.org
> http://www.freeswitchsolutions.com
>
>
>
>
> Official FreeSWITCH Sites
> http://www.freeswitch.org
> http://wiki.freeswitch.org
> http://www.cluecon.com
>
> FreeSWITCH-users mailing list
> FreeSWITCH-users at lists.freeswitch.org
> http://lists.freeswitch.org/mailman/listinfo/freeswitch-users
> UNSUBSCRIBE:http://lists.freeswitch.org/mailman/options/freeswitch-users
> http://www.freeswitch.org
>
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: http://lists.freeswitch.org/pipermail/freeswitch-users/attachments/20120309/0985bfa6/attachment.html
-------------- next part --------------
A non-text attachment was scrubbed...
Name: ton2npi1.pcap
Type: application/cap
Size: 894 bytes
Desc: not available
Url : http://lists.freeswitch.org/pipermail/freeswitch-users/attachments/20120309/0985bfa6/attachment.bin
Join us at ClueCon 2011 Aug 9-11, 2011
More information about the FreeSWITCH-users
mailing list