[Freeswitch-users] NORMAL CIRCUIT CONGESTION

[Rajkumar Kanniappan]

Hi,

I had connected my FreeSWITCH server to ePBX using sanoma A102DE, and installed wanpipe drivers and loaded freetdm module with the below configurations.

When I tried to make an outgoing call to a PBX extension(PSTN)

I got the following error.
<application action="bridge" data="freetdm/wp1/16/1000"/>

2012-08-13 14:47:54.172568 [ERR] ftdm_io.c:1921 Failed to open channel 1:16
2012-08-13 14:47:54.172568 [NOTICE] mod_freetdm.c:1622 Close Channel N/A [CS_NEW]
2012-08-13 14:47:54.172568 [NOTICE] switch_ivr_originate.c:2544 Cannot create outgoing channel of type [freetdm] cause: [NORMAL_CIRCUIT_CONGESTION]

Please help me out in solving this problem.

My configuration files are,
[devices]
wanpipe1 = WAN_AFT_TE1, Comment

[interfaces]
w1g1 = wanpipe1, , TDM_VOICE_API, Comment

[wanpipe1]
CARD_TYPE       = AFT
S514CPU         = A
CommPort        = PRI
AUTO_PCISLOT    = YES
PCISLOT         = 4
PCIBUS          = 2
FE_MEDIA        = E1
FE_LCODE        = HDB3
FE_FRAME        = CRC4
FE_LINE         = 1
TE_CLOCK        = NORMAL
TE_REF_CLOCK    = 0
TE_HIGHIMPEDANCE        = NO
TE_RX_SLEVEL    = 430
LBO             = 120OH
TE_SIG_MODE     = CCS
FE_TXTRISTATE   = NO
MTU             = 1500
UDPPORT         = 9000
TTL             = 255
IGNORE_FRONT_END = NO
TDMV_SPAN       = 1
TDMV_DCHAN      = 16
TDMV_HW_DTMF    = YES

[w1g1]
ACTIVE_CH       = ALL
TDMV_ECHO_OFF   = NO
TDMV_HWEC       = YES



freeswitch.conf.xml
<configuration name="freetdm.conf" description="Freetdm Configuration">
  <settings>
    <param name="debug" value="0"/>
  </settings>
                <config_profiles>
                <profile name=" cfg_prof">
                        <param name="switchtype" value="qsig" />
                        <param name="interface" value="pri_cpe"/>
                </profile>
                </config_profiles>
        <sangoma_pri_spans>
                <span name="wp1" cfgprofile="cfg_prof">
                        <param name="outbound-bc-user-layer1" value="ulaw"/>
                        <param name="send-cid-name" value="yes"/>
                        <param name="dialplan" value="XML"/>
                        <param name="context" value="PSTN"/>
                </span>
        </sangoma_pri_spans>
</configuration>

freetdm.conf
[span wanpipe wp1]
trunk_type => e1
group=grp1
b-channel => 1:1-15
b-channel => 1:17-31
d-channel => 1:16

Thanks
Rajkumar


________________________________
SASKEN BUSINESS DISCLAIMER: This message may contain confidential, proprietary or legally privileged information. In case you are not the original intended Recipient of the message, you must not, directly or indirectly, use, disclose, distribute, print, or copy any part of this message and you are requested to delete it and inform the sender. Any views expressed in this message are those of the individual sender unless otherwise stated. Nothing contained in this message shall be construed as an offer or acceptance of any offer by Sasken Communication Technologies Limited ("Sasken") unless sent with that express intent and with due authority of Sasken. Sasken has taken enough precautions to prevent the spread of viruses. However the company accepts no liability for any damage caused by any virus transmitted by this email.
Read Disclaimer at http://www.sasken.com/extras/mail_disclaimer.html
-------------- next part --------------
An HTML attachment was scrubbed...
URL: http://lists.freeswitch.org/pipermail/freeswitch-users/attachments/20120813/25c70dc7/attachment-0001.html