[Freeswitch-users] UK ISDN outgoing CLI (was Re: FreeTDM - Sangoma B700 - ISDN connection questions - UK)

[shouldbe q931]

On Fri, Jun 17, 2011 at 7:43 PM, shouldbe q931 <shouldbeq931 at gmail.com> wrote:
> On Fri, Jun 17, 2011 at 7:08 PM, John <freeswitch at earthspike.net> wrote:
>> Mike, Shouldbe,
>>
>> We now have CLIP on the line for sure, and I ordered COLP at the same time
>> and am assured that that has been turned on as well, but I still cannot get
>> outgoing CLI to work properly.  Mike, you mention setting the TON to
>> 'national'; where is that setting?
>>
>> At the moment, my dialplan looks like http://pastebin.freeswitch.org/16548
>> with .  An outgoing call gives the log 7 at
>> http://pastebin.freeswitch.org/16549 (numbers have been changed to protect
>> the innocent!) but the number that 01234 567890 sees on their Caller ID is
>> not 876543 but the main number of the line (876540, say).  I have tried
>> setting the outgoing_caller_id_number to 6, 10 and 11 digits, restarting FS
>> after each change, but with no success.
>>
>> The service provider has only one clue to offer: "With regards to the
>> configuration at the exchange, the line is set to 6 digits to switch." which
>> makes eminent sense, and suggests that I should be presenting 6 digits.
>> Incoming calls have a 6 digit called number and 10 digit calling number.
>>
>> Thanks for the help so far.  Any other ideas?
>>
>> John
>>
>>
>
> I don't have any experience with FS connecting over ISDN so can't help
> you much further on the FS configuration:-(
>
> However on the lines, I would be very tempted to see if you can borrow
> a BRI tester, or what I've frequently used in the past is an
> Eicon/Dialogic card as the test functions (under windows) are nearly
> as good, that might help you see if it _is_ a BT problem, or a FS
> configuration issue. It would need a 2k/XP machine, but something like
> http://cgi.ebay.co.uk/EICON-DIVA-2-01-PCI-GRAPHICS-CARD-/270761571564
> is what I have used in the past. I think I might have one of the
> PCMCIA ones somewhere, but I'd need to test it still works
>
> I'm fairly sure that the "6 digits to switch" is what they are sending
> to you, not what they are expecting from you. I can't access out
> remaining BRI (Avaya) PBX from here, but on our PRI (again Avaya)
> switches, we are sending 10 digits.
>
> Cheers
>

Apologies for the very long delay...

On our PRI systems we are sending 10 digits (2071231234), and on the
BRI system we are sending 11 digits (02071231234).

Cheers