[Freeswitch-users] Mod_rad_auth issue for FS working with FreeRadius server
Tihomir Culjaga
tculjaga at gmail.com
Sat Aug 6 20:04:25 MSD 2011
are u sure you are using the correct secret on both client and server ?
On Fri, Aug 5, 2011 at 10:12 AM, fieldpeak <fieldpeak at gmail.com> wrote:
> Hi Tihomir,
>
> Thanks for your advise, i've added below to rad_auth.conf.xml (vsas
> section), as well as tried auth-type to 0(local) and 1(system), however, the
> issue still exist.
>
>
> <param name="NAS-Port-Type" id="61" value="0" pec="0" expr="0"
> direction="in"/>
> <param name="Login-User" id="6" value="1" pec="0" expr="0" direction="in"/>
> <param name="Auth-Type" id="1000" value="0" pec="0" expr="0"
> direction="in"/>
>
> FreeRadius output:
>
> Found Auth-Type = PAP
> # Executing group from file /usr/local/etc/raddb/sites-enabled/default
> +- entering group PAP {...}
> [pap] login attempt with password "Q?²Êà ëê¢p?¤F?+Õa"
> [pap] Using clear text password "1111"
> [pap] Passwords don't match
> ++[pap] returns reject
> Failed to authenticate the user.
> WARNING: Unprintable characters in the password. Double-check the shared secret on the server and the NAS!
>
> Using Post-Auth-Type Reject
> # Executing group from file /usr/local/etc/raddb/sites-enabled/default
> +- entering group REJECT {...}
> [attr_filter.access_reject] expand: %{User-Name} -> 1001
> attr_filter: Matched entry DEFAULT at line 11
> ++[attr_filter.access_reject] returns updated
> Delaying reject of request 38 for 1 seconds
>
> Regards,
> Charles
>
>
> 2011/8/5 Tihomir Culjaga <tculjaga at gmail.com>
>
>> add to rad_auth.conf.xml
>>
>> <param name="NAS-Port-Type" id="61" value="0" pec="0" expr="0"
>> direction="in"/>
>> <param name="Login-User" id="6" value="1" pec="0" expr="0"
>> direction="in"/>
>>
>>
>>
>> as for Auth Type im not sure if you need it ... this is up to your server.
>> According to dictionary file you need to set it as follows:
>>
>> <param name="Auth-Type" id="1000" value="?" pec="0" expr="0"
>> direction="in"/>
>>
>> the value (set as ?) is one of the folowing. Again, not sure what is
>> required by your server.
>>
>> VALUE Auth-Type Local 0
>> VALUE Auth-Type System 1
>> VALUE Auth-Type SecurID 2
>> VALUE Auth-Type Crypt-Local 3
>> VALUE Auth-Type Reject 4
>>
>> #
>> # Cistron extensions
>> #
>> VALUE Auth-Type Pam 253
>> VALUE Auth-Type Accept 254
>>
>>
>>
>> regards,
>> Tihomir.
>>
>>
>>
>> On Wed, Aug 3, 2011 at 6:32 AM, fieldpeak <fieldpeak at gmail.com> wrote:
>>
>>> Hi Tihomir,
>>>
>>> Sorry, i missed your mail in gmail before, just now saw it, and after
>>> using your dictionary.all, the dictionary issue was resolved, very
>>> appreciated for your kindly help! however, it did not fully functional yet,
>>>
>>> Attached are configuration files that i used, when i dial 601 to trigger
>>> to auth, the freeradius server shows log below, the supecious log is the
>>> value User-Password, it should be '1111' that i've set in the mysql db of
>>> freeradisu server for the user 1001 .
>>>
>>> i searched in google, for "known good" password issue, i suggest change
>>> user-password to cleartext-password, however, i did not find where it is.
>>> and also the Auth-Type, where to configure it...
>>>
>>> Freeradius server log:
>>>
>>> rad_recv: Access-Request packet from host 127.0.0.1 port 52684, id=49,
>>> length=111
>>> User-Name = "1001"
>>> User-Password = "?\210\365@\263\t\306\343\243iT?\311C\t\002"
>>> Called-Station-Id = "888"
>>> h323-conf-id = "749d2b5a-16ad-48e4-af58-24011949d1b5"
>>> Calling-Station-Id = "1001"
>>> NAS-Port = 0
>>> NAS-IP-Address = 127.0.0.1
>>> # Executing section authorize from file
>>> /usr/local/etc/raddb/sites-enabled/default
>>> +- entering group authorize {...}
>>> ++[preprocess] returns ok
>>> [auth_log] expand:
>>> /usr/local/var/log/radius/radacct/%{Client-IP-Address}/auth-detail-%Y%m%d ->
>>> /usr/local/var/log/radius/radacct/127.0.0.1/auth-detail-20110803
>>> [auth_log]
>>> /usr/local/var/log/radius/radacct/%{Client-IP-Address}/auth-detail-%Y%m%d
>>> expands to /usr/local/var/log/radius/radacct/
>>> 127.0.0.1/auth-detail-20110803
>>> [auth_log] expand: %t -> Wed Aug 3 12:06:33 2011
>>> ++[auth_log] returns ok
>>> ++[chap] returns noop
>>> ++[mschap] returns noop
>>> ++[digest] returns noop
>>> [suffix] No '@' in User-Name = "1001", looking up realm NULL
>>> [suffix] No such realm "NULL"
>>> ++[suffix] returns noop
>>> [eap] No EAP-Message, not doing EAP
>>> ++[eap] returns noop
>>> ++[unix] returns notfound
>>> ++[files] returns noop
>>> [sql] expand: %{User-Name} -> 1001
>>> [sql] sql_set_user escaped user --> '1001'
>>> rlm_sql (sql): Reserving sql socket id: 4
>>> [sql] expand: SELECT id, username, attribute, value, op FROM
>>> radcheck WHERE username = '%{SQL-User-Name}' ORDER BY id
>>> -> SELECT id, username, attribute, value, op FROM
>>> radcheck WHERE username = '1001' ORDER BY id
>>> [sql] expand: SELECT groupname FROM radusergroup
>>> WHERE username = '%{SQL-User-Name}' ORDER BY priority -> SELECT
>>> groupname FROM radusergroup WHERE username =
>>> '1001' ORDER BY priority
>>> rlm_sql (sql): Released sql socket id: 4
>>> [sql] User 1001 not found
>>> ++[sql] returns notfound
>>> ++[expiration] returns noop
>>> ++[logintime] returns noop
>>> [pap] WARNING! No "known good" password found for the user.
>>> Authentication may fail because of this.
>>> ++[pap] returns noop
>>> ERROR: No authenticate method (Auth-Type) found for the request:
>>> Rejecting the user
>>> Failed to authenticate the user.
>>> WARNING: Unprintable characters in the password. Double-check
>>> the shared secret on the server and the NAS!
>>> Using Post-Auth-Type Reject
>>> # Executing group from file /usr/local/etc/raddb/sites-enabled/default
>>> +- entering group REJECT {...}
>>> [attr_filter.access_reject] expand: %{User-Name} -> 1001
>>> attr_filter: Matched entry DEFAULT at line 11
>>> ++[attr_filter.access_reject] returns updated
>>> Delaying reject of request 8 for 1 seconds
>>> Going to the next request
>>> Waking up in 0.9 seconds.
>>> Sending delayed reject for request 8
>>> Sending Access-Reject of id 49 to 127.0.0.1 port 52684
>>> Waking up in 4.9 seconds.
>>> Cleaning up request 8 ID 49 with timestamp +7674
>>> Ready to process requests.
>>> WARNING! No "known good" password found for the user
>>>
>>> Regards,
>>> Charles
>>>
>>>
>>> 2011/8/3 Tihomir Culjaga <tculjaga at gmail.com>
>>>
>>>> did u use the dictionary i have attached ?
>>>>
>>>>
>>>> On Tue, Aug 2, 2011 at 10:08 AM, fieldpeak <fieldpeak at gmail.com> wrote:
>>>>
>>>>> i tried change to 'h323-conf-id' to 'h323-call-origin' in
>>>>> 02_unitest_rad-ANI-auth.xml, rad_auth.conf.xml, however, it still prompt
>>>>> '[ERR] mod_rad_auth.c:428 Unknown attribute: key:h323-conf-id, not
>>>>> found in dictionary', so where the mod_rad_auth read out the 'h323-conf-id'?
>>>>> very very strange, which dictionary it was using...
>>>>>
>>>>> Regards,
>>>>> Charles
>>>>>
>>>>>
>>>>> 2011/8/2 fieldpeak <fieldpeak at gmail.com>
>>>>>
>>>>>> Hi Tihomir,
>>>>>>
>>>>>> Finally the answer coming, i see the hope, thanks for your reply, :)
>>>>>>
>>>>>> As your advise, i only use one attribute(h323-conf-id) in my dialplan,
>>>>>> and only one attribute(h323-conf-id) in rad_auth.conf.xml, and using the
>>>>>> attached dictionary (from ciso) which contains this attribute, however, it
>>>>>> still prompt 'unknown attribute', so i suspected if it was reading
>>>>>> /usr/local/etc/radiusclient/dictionary, so i copy the same dictionary to
>>>>>> /usr/local/freeswitch/radius/, it did not any help at all... very strange...
>>>>>>
>>>>>> Log:
>>>>>> 2011-08-02 15:37:26.578217 [DEBUG] mod_rad_auth.c:318 set
>>>>>> default_realm := .
>>>>>> 2011-08-02 15:37:26.578217 [DEBUG] mod_rad_auth.c:318 set
>>>>>> radius_timeout := 3.
>>>>>> 2011-08-02 15:37:26.578217 [DEBUG] mod_rad_auth.c:318 set
>>>>>> radius_retries := 2.
>>>>>> 2011-08-02 15:37:26.578217 [DEBUG] mod_rad_auth.c:318 set
>>>>>> radius_deadtime := 0.
>>>>>> 2011-08-02 15:37:26.578217 [DEBUG] mod_rad_auth.c:318 set bindaddr :=
>>>>>> *.
>>>>>> 2011-08-02 15:37:26.578217 [DEBUG] mod_rad_auth.c:371 ... radius:
>>>>>> User-Name: 38516060333
>>>>>> 2011-08-02 15:37:26.578217 [DEBUG] mod_rad_auth.c:380 ... radius:
>>>>>> User-Password: 003282
>>>>>> 2011-08-02 15:37:26.578217 [DEBUG] mod_rad_auth.c:396 ... radius:
>>>>>> Called-station-Id: 16094191500
>>>>>> 2011-08-02 15:37:26.578217 [DEBUG] mod_rad_auth.c:413 Handle
>>>>>> attribute: h323-conf-id
>>>>>> 2011-08-02 15:37:26.578217 [ERR] mod_rad_auth.c:428 Unknown attribute:
>>>>>> key:h323-conf-id, not found in dictionary
>>>>>> 2011-08-02 15:37:26.578217 [DEBUG] mod_rad_auth.c:538 abort sending
>>>>>> radius packet.
>>>>>> 2011-08-02 15:37:26.578217 [ERR] mod_rad_auth.c:546 An error occured
>>>>>> during RADIUS Authentication(RC=-1)
>>>>>> 2011-08-02 15:37:26.578217 [ERR] mod_rad_auth.c:702 An error occured
>>>>>> during radius authorization.
>>>>>>
>>>>>> EXECUTE sofia/internal/1001 at 124.193.106.104 log(INFO AUTH_RESULT=)
>>>>>>
>>>>>>
>>>>>>
>>>>>> <extension name="unitest_rad-ANI-auth">
>>>>>> <condition field="destination_number" expression="^601$">
>>>>>> <!-- <action application="log" data="INFO Before Auth "/> -->
>>>>>>
>>>>>> <action inline="true" application="set" data="CALLID=
>>>>>> h323-conf-id=${uuid}"/>
>>>>>>
>>>>>> <action inline="true" application="set" data="USERNAME=1001"/>
>>>>>> <action inline="true" application="set" data="PASSWD=1111"/>
>>>>>>
>>>>>>
>>>>>> <action application="sleep" data="2000"/>
>>>>>> <action application="auth_function" data="in ${DIALED_NUMBER},
>>>>>> in ${USERNAME}, in ${PASSWD}, out AUTH_RESULT"/>
>>>>>>
>>>>>> </condition>
>>>>>> </extension>
>>>>>>
>>>>>>
>>>>>>
>>>>>> <configuration name="rad_auth.conf" description="radius
>>>>>> authentification module">
>>>>>> <settings>
>>>>>>
>>>>>> </settings>
>>>>>>
>>>>>> <client>
>>>>>> <param name="authserver" value="127.0.0.1:1812:gateway"/>
>>>>>> <param name="dictionary"
>>>>>> value="/usr/local/etc/radiusclient/dictionary"/>
>>>>>> <param name="seqfile" value="/var/run/radius.seq"/>
>>>>>> <param name="mapfile"
>>>>>> value="/usr/local/etc/radiusclient/port-id-map"/>
>>>>>> <param name="default_realm" value=""/>
>>>>>> <param name="radius_timeout" value="3"/>
>>>>>> <param name="radius_retries" value="2"/>
>>>>>> <param name="radius_deadtime" value="0"/>
>>>>>> <param name="bindaddr" value="*"/>
>>>>>> </client>
>>>>>>
>>>>>> <vsas>
>>>>>>
>>>>>>
>>>>>> <param name="h323-conf-id" id="24" value="CALLID" pec="9"
>>>>>> expr="1" direction="in"/>
>>>>>>
>>>>>> </vsas>
>>>>>> </configuration>
>>>>>>
>>>>>>
>>>>>>
>>>>>> 2011/8/2 Tihomir Culjaga <tculjaga at gmail.com>
>>>>>>
>>>>>>> hi,
>>>>>>>
>>>>>>> dictionary.all is just the name of a file containing all attributes i
>>>>>>> needed at that time.
>>>>>>>
>>>>>>> you can include other dictionaries by putting #INCLUDE <pathname> at
>>>>>>> the end of the dictionary file you reference in rad_auth.conf.xml.
>>>>>>> if the INCLUDE doesn't work, just append dictionary.cisco to your
>>>>>>> dictionary file... and make your own file.
>>>>>>>
>>>>>>>
>>>>>>> check inline comments down below...
>>>>>>>
>>>>>>>
>>>>>>> T.
>>>>>>>
>>>>>>>
>>>>>>> On Sun, Jul 31, 2011 at 10:46 AM, fieldpeak <fieldpeak at gmail.com>wrote:
>>>>>>>
>>>>>>>> Hello Gurus,
>>>>>>>>
>>>>>>>> i met a issue when using
>>>>>>>> mod_rad_auth(http://wiki.freeswitch.org/wiki/Mod_rad_auth) to works
>>>>>>>> with freeradius server+mysql for AAA, the details is below, Could
>>>>>>>> anyone give any hints, Thanks in advance.
>>>>>>>>
>>>>>>>> i setup a dial plan "unitest_rad-ANI-auth" as wiki above, however,
>>>>>>>> when i dialed 601 to trigger the dial plan, the console show errors,
>>>>>>>> it looks "h323-conf-id" is not in the directory, then i tried to add
>>>>>>>> this attribute to the dictionary, however, it does not help, in the
>>>>>>>> wiki, it mentioned the rad_auth.conf.xml contains <param
>>>>>>>> name="dictionary"
>>>>>>>> value="/usr/local/etc/radiusclient/dictionary.all"/>, however i did
>>>>>>>> not find the file "dictionary.all" at that directory, so i use
>>>>>>>> dictionary. BTW, the freeradius server + mysql works well.
>>>>>>>>
>>>>>>>
>>>>>>> i just appended the information needed into dictionary.all file...
>>>>>>> (vendor and attribute definition).
>>>>>>>
>>>>>>>
>>>>>>>
>>>>>>>>
>>>>>>>> console errors:
>>>>>>>>
>>>>>>>> EXECUTE sofia/internal/1001 at 124.193.106.104 auth_function(in , in
>>>>>>>> 38516060333, in 003282, out AUTH_RESULT)
>>>>>>>> 2011-07-31 16:23:24.717088 [DEBUG] mod_rad_auth.c:301 allocate
>>>>>>>> initial
>>>>>>>> structure.
>>>>>>>> 2011-07-31 16:23:24.717088 [DEBUG] mod_rad_auth.c:313 initialzed
>>>>>>>> configuration.
>>>>>>>> 2011-07-31 16:23:24.717088 [DEBUG] mod_rad_auth.c:318 set authserver
>>>>>>>> := 127.0.0.1:1812:gateway.
>>>>>>>> 2011-07-31 16:23:24.717088 [DEBUG] mod_rad_auth.c:318 set dictionary
>>>>>>>> := /usr/local/etc/radiusclient/dictionary.
>>>>>>>> 2011-07-31 16:23:24.717088 [DEBUG] mod_rad_auth.c:318 set seqfile :=
>>>>>>>> /var/run/radius.seq.
>>>>>>>> 2011-07-31 16:23:24.717088 [DEBUG] mod_rad_auth.c:318 set mapfile :=
>>>>>>>> /usr/local/etc/radiusclient/port-id-map.
>>>>>>>> 2011-07-31 16:23:24.717088 [DEBUG] mod_rad_auth.c:318 set
>>>>>>>> default_realm := .
>>>>>>>> 2011-07-31 16:23:24.717088 [DEBUG] mod_rad_auth.c:318 set
>>>>>>>> radius_timeout := 3.
>>>>>>>> 2011-07-31 16:23:24.717088 [DEBUG] mod_rad_auth.c:318 set
>>>>>>>> radius_retries := 2.
>>>>>>>> 2011-07-31 16:23:24.717088 [DEBUG] mod_rad_auth.c:318 set
>>>>>>>> radius_deadtime := 0.
>>>>>>>> 2011-07-31 16:23:24.717088 [DEBUG] mod_rad_auth.c:318 set bindaddr
>>>>>>>> := *.
>>>>>>>> 2011-07-31 16:23:24.737004 [DEBUG] mod_rad_auth.c:371 ... radius:
>>>>>>>> User-Name: 38516060333
>>>>>>>> 2011-07-31 16:23:24.737004 [DEBUG] mod_rad_auth.c:380 ... radius:
>>>>>>>> User-Password: 003282
>>>>>>>> 2011-07-31 16:23:24.737004 [DEBUG] mod_rad_auth.c:391 ... radius:
>>>>>>>> Called-station-Id is empty, ignoring...
>>>>>>>> 2011-07-31 16:23:24.737004 [DEBUG] mod_rad_auth.c:413 Handle
>>>>>>>> attribute: h323-conf-id
>>>>>>>> 2011-07-31 16:23:24.737004 [ERR] mod_rad_auth.c:428 Unknown
>>>>>>>> attribute:
>>>>>>>> key:h323-conf-id, not found in dictionary
>>>>>>>> 2011-07-31 16:23:24.737004 [DEBUG] mod_rad_auth.c:538 abort sending
>>>>>>>> radius packet.
>>>>>>>> 2011-07-31 16:23:24.737004 [ERR] mod_rad_auth.c:546 An error occured
>>>>>>>> during RADIUS Authentication(RC=-1)
>>>>>>>> 2011-07-31 16:23:24.737004 [ERR] mod_rad_auth.c:702 An error occured
>>>>>>>> during radius authorization.
>>>>>>>> EXECUTE sofia/internal/1001 at 124.193.106.104 log(INFO AUTH_RESULT=)
>>>>>>>> 2011-07-31 16:23:24.737004 [INFO] mod_dptools.c:1202 AUTH_RESULT=
>>>>>>>> EXECUTE sofia/internal/1001 at 124.193.106.104 log(INFO
>>>>>>>> billing_model=)
>>>>>>>> 2011-07-31 16:23:24.737004 [INFO] mod_dptools.c:1202 billing_model=
>>>>>>>> EXECUTE sofia/internal/1001 at 124.193.106.104 log(INFO
>>>>>>>> credit_amount=)
>>>>>>>> 2011-07-31 16:23:24.737004 [INFO] mod_dptools.c:1202 credit_amount=
>>>>>>>> EXECUTE sofia/internal/1001 at 124.193.106.104 log(INFO currency=)
>>>>>>>> 2011-07-31 16:23:24.737004 [INFO] mod_dptools.c:1202 currency=
>>>>>>>> EXECUTE sofia/internal/1001 at 124.193.106.104 log(INFO
>>>>>>>> preffered_lang=)
>>>>>>>> 2011-07-31 16:23:24.737004 [INFO] mod_dptools.c:1202
>>>>>>>> preffered_lang=
>>>>>>>>
>>>>>>>> added below in the
>>>>>>>> dictionary(/usr/local/etc/radiusclient/dictionary):
>>>>>>>>
>>>>>>>> ATTRIBUTE h323-conf-id 1008 string
>>>>>>>>
>>>>>>>
>>>>>>> you need the vendor definition as well
>>>>>>>
>>>>>>>
>>>>>>>>
>>>>>>>>
>>>>>>>> dial plan:
>>>>>>>> <extension name="unitest_rad-ANI-auth">
>>>>>>>> <condition field="destination_number" expression="^601$">
>>>>>>>> <action application="log" data="INFO Before Auth "/>
>>>>>>>>
>>>>>>>> <action inline="true" application="set"
>>>>>>>> data="CALLID=h323-conf-id=${uuid}"/>
>>>>>>>> <action inline="true" application="set"
>>>>>>>> data="SERVICENUM=h323-prompt-id=${destination_number}"/>
>>>>>>>> <action inline="true" application="set"
>>>>>>>> data="TRANSACTIONID=h323-ivr-out=transactionID:1234"/>
>>>>>>>> <!-- <action inline="true" application="set"
>>>>>>>> data="CALLINGNUMBER=${caller_id_number}"/> -->
>>>>>>>> <action inline="true" application="set"
>>>>>>>> data="CALLINGNUMBER=38516060333"/>
>>>>>>>> <action inline="true" application="set"
>>>>>>>> data="USERNAME=38516060333"/>
>>>>>>>> <!-- <action inline="true" application="set"
>>>>>>>> data="USERNAME=209354"/> -->
>>>>>>>> <action inline="true" application="set" data="PASSWD=003282"/>
>>>>>>>> <!-- <action inline="true" application="set"
>>>>>>>> data="DIALED_NUMBER=16094191500"/> -->
>>>>>>>>
>>>>>>>> <action application="sleep" data="2000"/>
>>>>>>>> <action application="auth_function" data="in ${DIALED_NUMBER},
>>>>>>>> in ${USERNAME}, in ${PASSWD}, out AUTH_RESULT"/>
>>>>>>>>
>>>>>>>>
>>>>>>>> <action application="log" data="INFO
>>>>>>>> AUTH_RESULT=${AUTH_RESULT}"/>
>>>>>>>> <action application="log" data="INFO
>>>>>>>> billing_model=${billing_model}"/>
>>>>>>>> <action application="log" data="INFO
>>>>>>>> credit_amount=${credit_amount}"/>
>>>>>>>> <action application="log" data="INFO currency=${currency}"/>
>>>>>>>> <action application="log" data="INFO
>>>>>>>> preffered_lang=${preffered_lang}"/>
>>>>>>>> <action application="log" data="INFO
>>>>>>>> credit_time=${credit_time}"/>
>>>>>>>> <action application="log" data="INFO
>>>>>>>> h323_ivr_duration=${h323_ivr_duration}"/>
>>>>>>>> <action application="log" data="INFO
>>>>>>>> return_code=${return_code}"/>
>>>>>>>> <!-- <action application="execute_extension" data="AUTH XML
>>>>>>>> default"/> -->
>>>>>>>> </condition>
>>>>>>>> </extension>
>>>>>>>>
>>>>>>>> radius_cdr.conf.xml:
>>>>>>>> <configuration name="radius_cdr.conf" description="RADIUS CDR
>>>>>>>> Configuration">
>>>>>>>>
>>>>>>>> <settings>
>>>>>>>>
>>>>>>>> <!-- location of the radius dictionary files -->
>>>>>>>>
>>>>>>>> <param name="dictionary"
>>>>>>>> value="/usr/local/freeswitch/conf/radius/dictionary"/>
>>>>>>>>
>>>>>>>>
>>>>>>> your dictionary file need to contain all the attributes you are
>>>>>>> trying to use or to include other dictionaries (In this case
>>>>>>> dictionary.cisco) from the dictionary file you are referencing here.
>>>>>>>
>>>>>>>
>>>>>>>> <!-- number of retries for each server -->
>>>>>>>>
>>>>>>>> <param name="radius_retries" value="3"/>
>>>>>>>>
>>>>>>>> <!-- number of seconds to wait between retries -->
>>>>>>>>
>>>>>>>> <param name="radius_timeout" value="5"/>
>>>>>>>>
>>>>>>>> <!-- accounting servers, up to 8 allowed -->
>>>>>>>>
>>>>>>>> <!-- value is "host:port:secret", port is optional
>>>>>>>> -->
>>>>>>>>
>>>>>>>> <!-- use IP ADDRESSES, not hostnames -->
>>>>>>>>
>>>>>>>> <param name="acct_server" value="127.0.0.1:1813
>>>>>>>> :testing123"/>
>>>>>>>>
>>>>>>>>
>>>>>>>> </settings>
>>>>>>>>
>>>>>>>> </configuration>
>>>>>>>>
>>>>>>>> the FS version:
>>>>>>>> FreeSWITCH Version 1.0.head (git-492bc6b 2011-07-23 12-53-04 -0400)
>>>>>>>>
>>>>>>>> Regards,
>>>>>>>> Charles
>>>>>>>>
>>>>>>>> _______________________________________________
>>>>>>>> Join us at ClueCon 2011, Aug 9-11, Chicago
>>>>>>>> http://www.cluecon.com 877-7-4ACLUE
>>>>>>>>
>>>>>>>> FreeSWITCH-users mailing list
>>>>>>>>
>>>>>>>> FreeSWITCH-users at lists.freeswitch.org
>>>>>>>> http://lists.freeswitch.org/mailman/listinfo/freeswitch-users
>>>>>>>> UNSUBSCRIBE:
>>>>>>>> http://lists.freeswitch.org/mailman/options/freeswitch-users
>>>>>>>> http://www.freeswitch.org
>>>>>>>>
>>>>>>>
>>>>>>>
>>>>>>> _______________________________________________
>>>>>>> Join us at ClueCon 2011, Aug 9-11, Chicago
>>>>>>> http://www.cluecon.com 877-7-4ACLUE
>>>>>>>
>>>>>>> FreeSWITCH-users mailing list
>>>>>>> FreeSWITCH-users at lists.freeswitch.org
>>>>>>> http://lists.freeswitch.org/mailman/listinfo/freeswitch-users
>>>>>>> UNSUBSCRIBE:
>>>>>>> http://lists.freeswitch.org/mailman/options/freeswitch-users
>>>>>>> http://www.freeswitch.org
>>>>>>>
>>>>>>>
>>>>>>
>>>>>
>>>>> _______________________________________________
>>>>> Join us at ClueCon 2011, Aug 9-11, Chicago
>>>>> http://www.cluecon.com 877-7-4ACLUE
>>>>>
>>>>> FreeSWITCH-users mailing list
>>>>> FreeSWITCH-users at lists.freeswitch.org
>>>>> http://lists.freeswitch.org/mailman/listinfo/freeswitch-users
>>>>> UNSUBSCRIBE:
>>>>> http://lists.freeswitch.org/mailman/options/freeswitch-users
>>>>> http://www.freeswitch.org
>>>>>
>>>>>
>>>>
>>>> _______________________________________________
>>>> Join us at ClueCon 2011, Aug 9-11, Chicago
>>>> http://www.cluecon.com 877-7-4ACLUE
>>>>
>>>> FreeSWITCH-users mailing list
>>>> FreeSWITCH-users at lists.freeswitch.org
>>>> http://lists.freeswitch.org/mailman/listinfo/freeswitch-users
>>>> UNSUBSCRIBE:
>>>> http://lists.freeswitch.org/mailman/options/freeswitch-users
>>>> http://www.freeswitch.org
>>>>
>>>>
>>>
>>> _______________________________________________
>>> Join us at ClueCon 2011, Aug 9-11, Chicago
>>> http://www.cluecon.com 877-7-4ACLUE
>>>
>>> FreeSWITCH-users mailing list
>>> FreeSWITCH-users at lists.freeswitch.org
>>> http://lists.freeswitch.org/mailman/listinfo/freeswitch-users
>>> UNSUBSCRIBE:http://lists.freeswitch.org/mailman/options/freeswitch-users
>>> http://www.freeswitch.org
>>>
>>>
>>
>> _______________________________________________
>> Join us at ClueCon 2011, Aug 9-11, Chicago
>> http://www.cluecon.com 877-7-4ACLUE
>>
>> FreeSWITCH-users mailing list
>> FreeSWITCH-users at lists.freeswitch.org
>> http://lists.freeswitch.org/mailman/listinfo/freeswitch-users
>> UNSUBSCRIBE:http://lists.freeswitch.org/mailman/options/freeswitch-users
>> http://www.freeswitch.org
>>
>>
>
> _______________________________________________
> Join us at ClueCon 2011, Aug 9-11, Chicago
> http://www.cluecon.com 877-7-4ACLUE
>
> FreeSWITCH-users mailing list
> FreeSWITCH-users at lists.freeswitch.org
> http://lists.freeswitch.org/mailman/listinfo/freeswitch-users
> UNSUBSCRIBE:http://lists.freeswitch.org/mailman/options/freeswitch-users
> http://www.freeswitch.org
>
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: http://lists.freeswitch.org/pipermail/freeswitch-users/attachments/20110806/b02ec27b/attachment-0001.html
More information about the FreeSWITCH-users
mailing list