[Freeswitch-users] Mod_rad_auth issue for FS working with FreeRadius server
fieldpeak
fieldpeak at gmail.com
Fri Aug 5 17:59:56 MSD 2011
Hi Tihomir,
I found there are additional attribuites within the response of FreeRadius,
e.g. credit_amount, credit_time etc. in the wiki (
http://wiki.freeswitch.org/wiki/Mod_rad_auth), i belive you added those
fields in the database, can you please
share the DB schema of freeradius? It will definetely help a lot, Thanks in
advance.
Regards,
Charles
2011/8/5 fieldpeak <fieldpeak at gmail.com>
> Hi Tihomir,
>
> the issue was resovled by changing the secret of NAS client.
> very appreciated for your dedecated help :)
>
> Regards,
> Charels
>
>
> 2011/8/5 fieldpeak <fieldpeak at gmail.com>
>
>> Hi Tihomir,
>>
>> Thanks for your advise, i've added below to rad_auth.conf.xml (vsas
>> section), as well as tried auth-type to 0(local) and 1(system), however, the
>> issue still exist.
>>
>>
>> <param name="NAS-Port-Type" id="61" value="0" pec="0" expr="0"
>> direction="in"/>
>> <param name="Login-User" id="6" value="1" pec="0" expr="0"
>> direction="in"/>
>> <param name="Auth-Type" id="1000" value="0" pec="0" expr="0"
>> direction="in"/>
>>
>> FreeRadius output:
>>
>> Found Auth-Type = PAP
>> # Executing group from file /usr/local/etc/raddb/sites-enabled/default
>> +- entering group PAP {...}
>> [pap] login attempt with password "Q?²Êà ëê¢p?¤F?+Õa"
>> [pap] Using clear text password "1111"
>> [pap] Passwords don't match
>> ++[pap] returns reject
>> Failed to authenticate the user.
>> WARNING: Unprintable characters in the password. Double-check the shared secret on the server and the NAS!
>>
>> Using Post-Auth-Type Reject
>> # Executing group from file /usr/local/etc/raddb/sites-enabled/default
>> +- entering group REJECT {...}
>> [attr_filter.access_reject] expand: %{User-Name} -> 1001
>> attr_filter: Matched entry DEFAULT at line 11
>> ++[attr_filter.access_reject] returns updated
>> Delaying reject of request 38 for 1 seconds
>>
>> Regards,
>> Charles
>>
>>
>> 2011/8/5 Tihomir Culjaga <tculjaga at gmail.com>
>>
>>> add to rad_auth.conf.xml
>>>
>>> <param name="NAS-Port-Type" id="61" value="0" pec="0" expr="0"
>>> direction="in"/>
>>> <param name="Login-User" id="6" value="1" pec="0" expr="0"
>>> direction="in"/>
>>>
>>>
>>>
>>> as for Auth Type im not sure if you need it ... this is up to your
>>> server.
>>> According to dictionary file you need to set it as follows:
>>>
>>> <param name="Auth-Type" id="1000" value="?" pec="0" expr="0"
>>> direction="in"/>
>>>
>>> the value (set as ?) is one of the folowing. Again, not sure what is
>>> required by your server.
>>>
>>> VALUE Auth-Type Local 0
>>> VALUE Auth-Type System 1
>>> VALUE Auth-Type SecurID 2
>>> VALUE Auth-Type Crypt-Local 3
>>> VALUE Auth-Type Reject 4
>>>
>>> #
>>> # Cistron extensions
>>> #
>>> VALUE Auth-Type Pam 253
>>> VALUE Auth-Type Accept 254
>>>
>>>
>>>
>>> regards,
>>> Tihomir.
>>>
>>>
>>>
>>> On Wed, Aug 3, 2011 at 6:32 AM, fieldpeak <fieldpeak at gmail.com> wrote:
>>>
>>>> Hi Tihomir,
>>>>
>>>> Sorry, i missed your mail in gmail before, just now saw it, and after
>>>> using your dictionary.all, the dictionary issue was resolved, very
>>>> appreciated for your kindly help! however, it did not fully functional yet,
>>>>
>>>> Attached are configuration files that i used, when i dial 601 to trigger
>>>> to auth, the freeradius server shows log below, the supecious log is the
>>>> value User-Password, it should be '1111' that i've set in the mysql db of
>>>> freeradisu server for the user 1001 .
>>>>
>>>> i searched in google, for "known good" password issue, i suggest change
>>>> user-password to cleartext-password, however, i did not find where it is.
>>>> and also the Auth-Type, where to configure it...
>>>>
>>>> Freeradius server log:
>>>>
>>>> rad_recv: Access-Request packet from host 127.0.0.1 port 52684, id=49,
>>>> length=111
>>>> User-Name = "1001"
>>>> User-Password = "?\210\365@\263\t\306\343\243iT?\311C\t\002"
>>>> Called-Station-Id = "888"
>>>> h323-conf-id = "749d2b5a-16ad-48e4-af58-24011949d1b5"
>>>> Calling-Station-Id = "1001"
>>>> NAS-Port = 0
>>>> NAS-IP-Address = 127.0.0.1
>>>> # Executing section authorize from file
>>>> /usr/local/etc/raddb/sites-enabled/default
>>>> +- entering group authorize {...}
>>>> ++[preprocess] returns ok
>>>> [auth_log] expand:
>>>> /usr/local/var/log/radius/radacct/%{Client-IP-Address}/auth-detail-%Y%m%d ->
>>>> /usr/local/var/log/radius/radacct/127.0.0.1/auth-detail-20110803
>>>> [auth_log]
>>>> /usr/local/var/log/radius/radacct/%{Client-IP-Address}/auth-detail-%Y%m%d
>>>> expands to /usr/local/var/log/radius/radacct/
>>>> 127.0.0.1/auth-detail-20110803
>>>> [auth_log] expand: %t -> Wed Aug 3 12:06:33 2011
>>>> ++[auth_log] returns ok
>>>> ++[chap] returns noop
>>>> ++[mschap] returns noop
>>>> ++[digest] returns noop
>>>> [suffix] No '@' in User-Name = "1001", looking up realm NULL
>>>> [suffix] No such realm "NULL"
>>>> ++[suffix] returns noop
>>>> [eap] No EAP-Message, not doing EAP
>>>> ++[eap] returns noop
>>>> ++[unix] returns notfound
>>>> ++[files] returns noop
>>>> [sql] expand: %{User-Name} -> 1001
>>>> [sql] sql_set_user escaped user --> '1001'
>>>> rlm_sql (sql): Reserving sql socket id: 4
>>>> [sql] expand: SELECT id, username, attribute, value, op FROM
>>>> radcheck WHERE username = '%{SQL-User-Name}' ORDER BY id
>>>> -> SELECT id, username, attribute, value, op FROM
>>>> radcheck WHERE username = '1001' ORDER BY id
>>>> [sql] expand: SELECT groupname FROM radusergroup
>>>> WHERE username = '%{SQL-User-Name}' ORDER BY priority -> SELECT
>>>> groupname FROM radusergroup WHERE username =
>>>> '1001' ORDER BY priority
>>>> rlm_sql (sql): Released sql socket id: 4
>>>> [sql] User 1001 not found
>>>> ++[sql] returns notfound
>>>> ++[expiration] returns noop
>>>> ++[logintime] returns noop
>>>> [pap] WARNING! No "known good" password found for the user.
>>>> Authentication may fail because of this.
>>>> ++[pap] returns noop
>>>> ERROR: No authenticate method (Auth-Type) found for the request:
>>>> Rejecting the user
>>>> Failed to authenticate the user.
>>>> WARNING: Unprintable characters in the password. Double-check
>>>> the shared secret on the server and the NAS!
>>>> Using Post-Auth-Type Reject
>>>> # Executing group from file /usr/local/etc/raddb/sites-enabled/default
>>>> +- entering group REJECT {...}
>>>> [attr_filter.access_reject] expand: %{User-Name} -> 1001
>>>> attr_filter: Matched entry DEFAULT at line 11
>>>> ++[attr_filter.access_reject] returns updated
>>>> Delaying reject of request 8 for 1 seconds
>>>> Going to the next request
>>>> Waking up in 0.9 seconds.
>>>> Sending delayed reject for request 8
>>>> Sending Access-Reject of id 49 to 127.0.0.1 port 52684
>>>> Waking up in 4.9 seconds.
>>>> Cleaning up request 8 ID 49 with timestamp +7674
>>>> Ready to process requests.
>>>> WARNING! No "known good" password found for the user
>>>>
>>>> Regards,
>>>> Charles
>>>>
>>>>
>>>> 2011/8/3 Tihomir Culjaga <tculjaga at gmail.com>
>>>>
>>>>> did u use the dictionary i have attached ?
>>>>>
>>>>>
>>>>> On Tue, Aug 2, 2011 at 10:08 AM, fieldpeak <fieldpeak at gmail.com>wrote:
>>>>>
>>>>>> i tried change to 'h323-conf-id' to 'h323-call-origin' in
>>>>>> 02_unitest_rad-ANI-auth.xml, rad_auth.conf.xml, however, it still prompt
>>>>>> '[ERR] mod_rad_auth.c:428 Unknown attribute: key:h323-conf-id, not
>>>>>> found in dictionary', so where the mod_rad_auth read out the 'h323-conf-id'?
>>>>>> very very strange, which dictionary it was using...
>>>>>>
>>>>>> Regards,
>>>>>> Charles
>>>>>>
>>>>>>
>>>>>> 2011/8/2 fieldpeak <fieldpeak at gmail.com>
>>>>>>
>>>>>>> Hi Tihomir,
>>>>>>>
>>>>>>> Finally the answer coming, i see the hope, thanks for your reply, :)
>>>>>>>
>>>>>>> As your advise, i only use one attribute(h323-conf-id) in my
>>>>>>> dialplan, and only one attribute(h323-conf-id) in rad_auth.conf.xml, and
>>>>>>> using the attached dictionary (from ciso) which contains this attribute,
>>>>>>> however, it still prompt 'unknown attribute', so i suspected if it was
>>>>>>> reading /usr/local/etc/radiusclient/dictionary, so i copy the same
>>>>>>> dictionary to /usr/local/freeswitch/radius/, it did not any help at all...
>>>>>>> very strange...
>>>>>>>
>>>>>>> Log:
>>>>>>> 2011-08-02 15:37:26.578217 [DEBUG] mod_rad_auth.c:318 set
>>>>>>> default_realm := .
>>>>>>> 2011-08-02 15:37:26.578217 [DEBUG] mod_rad_auth.c:318 set
>>>>>>> radius_timeout := 3.
>>>>>>> 2011-08-02 15:37:26.578217 [DEBUG] mod_rad_auth.c:318 set
>>>>>>> radius_retries := 2.
>>>>>>> 2011-08-02 15:37:26.578217 [DEBUG] mod_rad_auth.c:318 set
>>>>>>> radius_deadtime := 0.
>>>>>>> 2011-08-02 15:37:26.578217 [DEBUG] mod_rad_auth.c:318 set bindaddr :=
>>>>>>> *.
>>>>>>> 2011-08-02 15:37:26.578217 [DEBUG] mod_rad_auth.c:371 ... radius:
>>>>>>> User-Name: 38516060333
>>>>>>> 2011-08-02 15:37:26.578217 [DEBUG] mod_rad_auth.c:380 ... radius:
>>>>>>> User-Password: 003282
>>>>>>> 2011-08-02 15:37:26.578217 [DEBUG] mod_rad_auth.c:396 ... radius:
>>>>>>> Called-station-Id: 16094191500
>>>>>>> 2011-08-02 15:37:26.578217 [DEBUG] mod_rad_auth.c:413 Handle
>>>>>>> attribute: h323-conf-id
>>>>>>> 2011-08-02 15:37:26.578217 [ERR] mod_rad_auth.c:428 Unknown
>>>>>>> attribute: key:h323-conf-id, not found in dictionary
>>>>>>> 2011-08-02 15:37:26.578217 [DEBUG] mod_rad_auth.c:538 abort sending
>>>>>>> radius packet.
>>>>>>> 2011-08-02 15:37:26.578217 [ERR] mod_rad_auth.c:546 An error occured
>>>>>>> during RADIUS Authentication(RC=-1)
>>>>>>> 2011-08-02 15:37:26.578217 [ERR] mod_rad_auth.c:702 An error occured
>>>>>>> during radius authorization.
>>>>>>>
>>>>>>> EXECUTE sofia/internal/1001 at 124.193.106.104 log(INFO AUTH_RESULT=)
>>>>>>>
>>>>>>>
>>>>>>>
>>>>>>> <extension name="unitest_rad-ANI-auth">
>>>>>>> <condition field="destination_number" expression="^601$">
>>>>>>> <!-- <action application="log" data="INFO Before Auth "/> -->
>>>>>>>
>>>>>>> <action inline="true" application="set" data="CALLID=
>>>>>>> h323-conf-id=${uuid}"/>
>>>>>>>
>>>>>>> <action inline="true" application="set" data="USERNAME=1001"/>
>>>>>>> <action inline="true" application="set" data="PASSWD=1111"/>
>>>>>>>
>>>>>>>
>>>>>>> <action application="sleep" data="2000"/>
>>>>>>> <action application="auth_function" data="in ${DIALED_NUMBER},
>>>>>>> in ${USERNAME}, in ${PASSWD}, out AUTH_RESULT"/>
>>>>>>>
>>>>>>> </condition>
>>>>>>> </extension>
>>>>>>>
>>>>>>>
>>>>>>>
>>>>>>> <configuration name="rad_auth.conf" description="radius
>>>>>>> authentification module">
>>>>>>> <settings>
>>>>>>>
>>>>>>> </settings>
>>>>>>>
>>>>>>> <client>
>>>>>>> <param name="authserver" value="127.0.0.1:1812:gateway"/>
>>>>>>> <param name="dictionary"
>>>>>>> value="/usr/local/etc/radiusclient/dictionary"/>
>>>>>>> <param name="seqfile" value="/var/run/radius.seq"/>
>>>>>>> <param name="mapfile"
>>>>>>> value="/usr/local/etc/radiusclient/port-id-map"/>
>>>>>>> <param name="default_realm" value=""/>
>>>>>>> <param name="radius_timeout" value="3"/>
>>>>>>> <param name="radius_retries" value="2"/>
>>>>>>> <param name="radius_deadtime" value="0"/>
>>>>>>> <param name="bindaddr" value="*"/>
>>>>>>> </client>
>>>>>>>
>>>>>>> <vsas>
>>>>>>>
>>>>>>>
>>>>>>> <param name="h323-conf-id" id="24" value="CALLID" pec="9"
>>>>>>> expr="1" direction="in"/>
>>>>>>>
>>>>>>> </vsas>
>>>>>>> </configuration>
>>>>>>>
>>>>>>>
>>>>>>>
>>>>>>> 2011/8/2 Tihomir Culjaga <tculjaga at gmail.com>
>>>>>>>
>>>>>>>> hi,
>>>>>>>>
>>>>>>>> dictionary.all is just the name of a file containing all attributes
>>>>>>>> i needed at that time.
>>>>>>>>
>>>>>>>> you can include other dictionaries by putting #INCLUDE <pathname> at
>>>>>>>> the end of the dictionary file you reference in rad_auth.conf.xml.
>>>>>>>> if the INCLUDE doesn't work, just append dictionary.cisco to your
>>>>>>>> dictionary file... and make your own file.
>>>>>>>>
>>>>>>>>
>>>>>>>> check inline comments down below...
>>>>>>>>
>>>>>>>>
>>>>>>>> T.
>>>>>>>>
>>>>>>>>
>>>>>>>> On Sun, Jul 31, 2011 at 10:46 AM, fieldpeak <fieldpeak at gmail.com>wrote:
>>>>>>>>
>>>>>>>>> Hello Gurus,
>>>>>>>>>
>>>>>>>>> i met a issue when using
>>>>>>>>> mod_rad_auth(http://wiki.freeswitch.org/wiki/Mod_rad_auth) to
>>>>>>>>> works
>>>>>>>>> with freeradius server+mysql for AAA, the details is below, Could
>>>>>>>>> anyone give any hints, Thanks in advance.
>>>>>>>>>
>>>>>>>>> i setup a dial plan "unitest_rad-ANI-auth" as wiki above, however,
>>>>>>>>> when i dialed 601 to trigger the dial plan, the console show
>>>>>>>>> errors,
>>>>>>>>> it looks "h323-conf-id" is not in the directory, then i tried to
>>>>>>>>> add
>>>>>>>>> this attribute to the dictionary, however, it does not help, in the
>>>>>>>>> wiki, it mentioned the rad_auth.conf.xml contains <param
>>>>>>>>> name="dictionary"
>>>>>>>>> value="/usr/local/etc/radiusclient/dictionary.all"/>, however i did
>>>>>>>>> not find the file "dictionary.all" at that directory, so i use
>>>>>>>>> dictionary. BTW, the freeradius server + mysql works well.
>>>>>>>>>
>>>>>>>>
>>>>>>>> i just appended the information needed into dictionary.all file...
>>>>>>>> (vendor and attribute definition).
>>>>>>>>
>>>>>>>>
>>>>>>>>
>>>>>>>>>
>>>>>>>>> console errors:
>>>>>>>>>
>>>>>>>>> EXECUTE sofia/internal/1001 at 124.193.106.104 auth_function(in , in
>>>>>>>>> 38516060333, in 003282, out AUTH_RESULT)
>>>>>>>>> 2011-07-31 16:23:24.717088 [DEBUG] mod_rad_auth.c:301 allocate
>>>>>>>>> initial
>>>>>>>>> structure.
>>>>>>>>> 2011-07-31 16:23:24.717088 [DEBUG] mod_rad_auth.c:313 initialzed
>>>>>>>>> configuration.
>>>>>>>>> 2011-07-31 16:23:24.717088 [DEBUG] mod_rad_auth.c:318 set
>>>>>>>>> authserver
>>>>>>>>> := 127.0.0.1:1812:gateway.
>>>>>>>>> 2011-07-31 16:23:24.717088 [DEBUG] mod_rad_auth.c:318 set
>>>>>>>>> dictionary
>>>>>>>>> := /usr/local/etc/radiusclient/dictionary.
>>>>>>>>> 2011-07-31 16:23:24.717088 [DEBUG] mod_rad_auth.c:318 set seqfile
>>>>>>>>> :=
>>>>>>>>> /var/run/radius.seq.
>>>>>>>>> 2011-07-31 16:23:24.717088 [DEBUG] mod_rad_auth.c:318 set mapfile
>>>>>>>>> :=
>>>>>>>>> /usr/local/etc/radiusclient/port-id-map.
>>>>>>>>> 2011-07-31 16:23:24.717088 [DEBUG] mod_rad_auth.c:318 set
>>>>>>>>> default_realm := .
>>>>>>>>> 2011-07-31 16:23:24.717088 [DEBUG] mod_rad_auth.c:318 set
>>>>>>>>> radius_timeout := 3.
>>>>>>>>> 2011-07-31 16:23:24.717088 [DEBUG] mod_rad_auth.c:318 set
>>>>>>>>> radius_retries := 2.
>>>>>>>>> 2011-07-31 16:23:24.717088 [DEBUG] mod_rad_auth.c:318 set
>>>>>>>>> radius_deadtime := 0.
>>>>>>>>> 2011-07-31 16:23:24.717088 [DEBUG] mod_rad_auth.c:318 set bindaddr
>>>>>>>>> := *.
>>>>>>>>> 2011-07-31 16:23:24.737004 [DEBUG] mod_rad_auth.c:371 ... radius:
>>>>>>>>> User-Name: 38516060333
>>>>>>>>> 2011-07-31 16:23:24.737004 [DEBUG] mod_rad_auth.c:380 ... radius:
>>>>>>>>> User-Password: 003282
>>>>>>>>> 2011-07-31 16:23:24.737004 [DEBUG] mod_rad_auth.c:391 ... radius:
>>>>>>>>> Called-station-Id is empty, ignoring...
>>>>>>>>> 2011-07-31 16:23:24.737004 [DEBUG] mod_rad_auth.c:413 Handle
>>>>>>>>> attribute: h323-conf-id
>>>>>>>>> 2011-07-31 16:23:24.737004 [ERR] mod_rad_auth.c:428 Unknown
>>>>>>>>> attribute:
>>>>>>>>> key:h323-conf-id, not found in dictionary
>>>>>>>>> 2011-07-31 16:23:24.737004 [DEBUG] mod_rad_auth.c:538 abort sending
>>>>>>>>> radius packet.
>>>>>>>>> 2011-07-31 16:23:24.737004 [ERR] mod_rad_auth.c:546 An error
>>>>>>>>> occured
>>>>>>>>> during RADIUS Authentication(RC=-1)
>>>>>>>>> 2011-07-31 16:23:24.737004 [ERR] mod_rad_auth.c:702 An error
>>>>>>>>> occured
>>>>>>>>> during radius authorization.
>>>>>>>>> EXECUTE sofia/internal/1001 at 124.193.106.104 log(INFO
>>>>>>>>> AUTH_RESULT=)
>>>>>>>>> 2011-07-31 16:23:24.737004 [INFO] mod_dptools.c:1202 AUTH_RESULT=
>>>>>>>>> EXECUTE sofia/internal/1001 at 124.193.106.104 log(INFO
>>>>>>>>> billing_model=)
>>>>>>>>> 2011-07-31 16:23:24.737004 [INFO] mod_dptools.c:1202
>>>>>>>>> billing_model=
>>>>>>>>> EXECUTE sofia/internal/1001 at 124.193.106.104 log(INFO
>>>>>>>>> credit_amount=)
>>>>>>>>> 2011-07-31 16:23:24.737004 [INFO] mod_dptools.c:1202
>>>>>>>>> credit_amount=
>>>>>>>>> EXECUTE sofia/internal/1001 at 124.193.106.104 log(INFO currency=)
>>>>>>>>> 2011-07-31 16:23:24.737004 [INFO] mod_dptools.c:1202 currency=
>>>>>>>>> EXECUTE sofia/internal/1001 at 124.193.106.104 log(INFO
>>>>>>>>> preffered_lang=)
>>>>>>>>> 2011-07-31 16:23:24.737004 [INFO] mod_dptools.c:1202
>>>>>>>>> preffered_lang=
>>>>>>>>>
>>>>>>>>> added below in the
>>>>>>>>> dictionary(/usr/local/etc/radiusclient/dictionary):
>>>>>>>>>
>>>>>>>>> ATTRIBUTE h323-conf-id 1008 string
>>>>>>>>>
>>>>>>>>
>>>>>>>> you need the vendor definition as well
>>>>>>>>
>>>>>>>>
>>>>>>>>>
>>>>>>>>>
>>>>>>>>> dial plan:
>>>>>>>>> <extension name="unitest_rad-ANI-auth">
>>>>>>>>> <condition field="destination_number" expression="^601$">
>>>>>>>>> <action application="log" data="INFO Before Auth "/>
>>>>>>>>>
>>>>>>>>> <action inline="true" application="set"
>>>>>>>>> data="CALLID=h323-conf-id=${uuid}"/>
>>>>>>>>> <action inline="true" application="set"
>>>>>>>>> data="SERVICENUM=h323-prompt-id=${destination_number}"/>
>>>>>>>>> <action inline="true" application="set"
>>>>>>>>> data="TRANSACTIONID=h323-ivr-out=transactionID:1234"/>
>>>>>>>>> <!-- <action inline="true" application="set"
>>>>>>>>> data="CALLINGNUMBER=${caller_id_number}"/> -->
>>>>>>>>> <action inline="true" application="set"
>>>>>>>>> data="CALLINGNUMBER=38516060333"/>
>>>>>>>>> <action inline="true" application="set"
>>>>>>>>> data="USERNAME=38516060333"/>
>>>>>>>>> <!-- <action inline="true" application="set"
>>>>>>>>> data="USERNAME=209354"/> -->
>>>>>>>>> <action inline="true" application="set" data="PASSWD=003282"/>
>>>>>>>>> <!-- <action inline="true" application="set"
>>>>>>>>> data="DIALED_NUMBER=16094191500"/> -->
>>>>>>>>>
>>>>>>>>> <action application="sleep" data="2000"/>
>>>>>>>>> <action application="auth_function" data="in ${DIALED_NUMBER},
>>>>>>>>> in ${USERNAME}, in ${PASSWD}, out AUTH_RESULT"/>
>>>>>>>>>
>>>>>>>>>
>>>>>>>>> <action application="log" data="INFO
>>>>>>>>> AUTH_RESULT=${AUTH_RESULT}"/>
>>>>>>>>> <action application="log" data="INFO
>>>>>>>>> billing_model=${billing_model}"/>
>>>>>>>>> <action application="log" data="INFO
>>>>>>>>> credit_amount=${credit_amount}"/>
>>>>>>>>> <action application="log" data="INFO currency=${currency}"/>
>>>>>>>>> <action application="log" data="INFO
>>>>>>>>> preffered_lang=${preffered_lang}"/>
>>>>>>>>> <action application="log" data="INFO
>>>>>>>>> credit_time=${credit_time}"/>
>>>>>>>>> <action application="log" data="INFO
>>>>>>>>> h323_ivr_duration=${h323_ivr_duration}"/>
>>>>>>>>> <action application="log" data="INFO
>>>>>>>>> return_code=${return_code}"/>
>>>>>>>>> <!-- <action application="execute_extension" data="AUTH XML
>>>>>>>>> default"/> -->
>>>>>>>>> </condition>
>>>>>>>>> </extension>
>>>>>>>>>
>>>>>>>>> radius_cdr.conf.xml:
>>>>>>>>> <configuration name="radius_cdr.conf" description="RADIUS CDR
>>>>>>>>> Configuration">
>>>>>>>>>
>>>>>>>>> <settings>
>>>>>>>>>
>>>>>>>>> <!-- location of the radius dictionary files -->
>>>>>>>>>
>>>>>>>>> <param name="dictionary"
>>>>>>>>> value="/usr/local/freeswitch/conf/radius/dictionary"/>
>>>>>>>>>
>>>>>>>>>
>>>>>>>> your dictionary file need to contain all the attributes you are
>>>>>>>> trying to use or to include other dictionaries (In this case
>>>>>>>> dictionary.cisco) from the dictionary file you are referencing here.
>>>>>>>>
>>>>>>>>
>>>>>>>>> <!-- number of retries for each server -->
>>>>>>>>>
>>>>>>>>> <param name="radius_retries" value="3"/>
>>>>>>>>>
>>>>>>>>> <!-- number of seconds to wait between retries -->
>>>>>>>>>
>>>>>>>>> <param name="radius_timeout" value="5"/>
>>>>>>>>>
>>>>>>>>> <!-- accounting servers, up to 8 allowed -->
>>>>>>>>>
>>>>>>>>> <!-- value is "host:port:secret", port is optional
>>>>>>>>> -->
>>>>>>>>>
>>>>>>>>> <!-- use IP ADDRESSES, not hostnames -->
>>>>>>>>>
>>>>>>>>> <param name="acct_server" value="127.0.0.1:1813
>>>>>>>>> :testing123"/>
>>>>>>>>>
>>>>>>>>>
>>>>>>>>> </settings>
>>>>>>>>>
>>>>>>>>> </configuration>
>>>>>>>>>
>>>>>>>>> the FS version:
>>>>>>>>> FreeSWITCH Version 1.0.head (git-492bc6b 2011-07-23 12-53-04
>>>>>>>>> -0400)
>>>>>>>>>
>>>>>>>>> Regards,
>>>>>>>>> Charles
>>>>>>>>>
>>>>>>>>> _______________________________________________
>>>>>>>>> Join us at ClueCon 2011, Aug 9-11, Chicago
>>>>>>>>> http://www.cluecon.com 877-7-4ACLUE
>>>>>>>>>
>>>>>>>>> FreeSWITCH-users mailing list
>>>>>>>>>
>>>>>>>>> FreeSWITCH-users at lists.freeswitch.org
>>>>>>>>> http://lists.freeswitch.org/mailman/listinfo/freeswitch-users
>>>>>>>>> UNSUBSCRIBE:
>>>>>>>>> http://lists.freeswitch.org/mailman/options/freeswitch-users
>>>>>>>>> http://www.freeswitch.org
>>>>>>>>>
>>>>>>>>
>>>>>>>>
>>>>>>>> _______________________________________________
>>>>>>>> Join us at ClueCon 2011, Aug 9-11, Chicago
>>>>>>>> http://www.cluecon.com 877-7-4ACLUE
>>>>>>>>
>>>>>>>> FreeSWITCH-users mailing list
>>>>>>>> FreeSWITCH-users at lists.freeswitch.org
>>>>>>>> http://lists.freeswitch.org/mailman/listinfo/freeswitch-users
>>>>>>>> UNSUBSCRIBE:
>>>>>>>> http://lists.freeswitch.org/mailman/options/freeswitch-users
>>>>>>>> http://www.freeswitch.org
>>>>>>>>
>>>>>>>>
>>>>>>>
>>>>>>
>>>>>> _______________________________________________
>>>>>> Join us at ClueCon 2011, Aug 9-11, Chicago
>>>>>> http://www.cluecon.com 877-7-4ACLUE
>>>>>>
>>>>>> FreeSWITCH-users mailing list
>>>>>> FreeSWITCH-users at lists.freeswitch.org
>>>>>> http://lists.freeswitch.org/mailman/listinfo/freeswitch-users
>>>>>> UNSUBSCRIBE:
>>>>>> http://lists.freeswitch.org/mailman/options/freeswitch-users
>>>>>> http://www.freeswitch.org
>>>>>>
>>>>>>
>>>>>
>>>>> _______________________________________________
>>>>> Join us at ClueCon 2011, Aug 9-11, Chicago
>>>>> http://www.cluecon.com 877-7-4ACLUE
>>>>>
>>>>> FreeSWITCH-users mailing list
>>>>> FreeSWITCH-users at lists.freeswitch.org
>>>>> http://lists.freeswitch.org/mailman/listinfo/freeswitch-users
>>>>> UNSUBSCRIBE:
>>>>> http://lists.freeswitch.org/mailman/options/freeswitch-users
>>>>> http://www.freeswitch.org
>>>>>
>>>>>
>>>>
>>>> _______________________________________________
>>>> Join us at ClueCon 2011, Aug 9-11, Chicago
>>>> http://www.cluecon.com 877-7-4ACLUE
>>>>
>>>> FreeSWITCH-users mailing list
>>>> FreeSWITCH-users at lists.freeswitch.org
>>>> http://lists.freeswitch.org/mailman/listinfo/freeswitch-users
>>>> UNSUBSCRIBE:
>>>> http://lists.freeswitch.org/mailman/options/freeswitch-users
>>>> http://www.freeswitch.org
>>>>
>>>>
>>>
>>> _______________________________________________
>>> Join us at ClueCon 2011, Aug 9-11, Chicago
>>> http://www.cluecon.com 877-7-4ACLUE
>>>
>>> FreeSWITCH-users mailing list
>>> FreeSWITCH-users at lists.freeswitch.org
>>> http://lists.freeswitch.org/mailman/listinfo/freeswitch-users
>>> UNSUBSCRIBE:http://lists.freeswitch.org/mailman/options/freeswitch-users
>>> http://www.freeswitch.org
>>>
>>>
>>
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: http://lists.freeswitch.org/pipermail/freeswitch-users/attachments/20110805/4a0fa947/attachment-0001.html
More information about the FreeSWITCH-users
mailing list