[Freeswitch-users] SIP router/switch only configuratoin advice?

[David Ponzone]

Then check http://wiki.freeswitch.org/wiki/Xml_curl :)

David Ponzone  Direction Technique
email: david.ponzone at ipeva.fr
tel:      01 74 03 18 97
gsm:   06 66 98 76 34

Service Client IPeva
tel:      0811 46 26 26
www.ipeva.fr  -   www.ipeva-studio.com

Ce message et toutes les pièces jointes sont confidentiels et établis à l'intention exclusive de ses destinataires. Toute utilisation ou diffusion non autorisée est interdite. Tout message électronique est susceptible d'altération. IPeva décline toute responsabilité au titre de ce message s'il a été altéré, déformé ou falsifié. Si vous n'êtes pas destinataire de ce message, merci de le détruire immédiatement et d'avertir l'expéditeur.




Le 26/04/2011 à 09:19, Georgy Goshin a écrit :

> David, Thanks!
>  
> I see that routing/permission logic is little bit complicated for just call routing/proxing, I believe there will be simpler to do all job in the database. Is there a simple way to configure FS so it will ask from the database for a destination for a call and it’s parameters (ip parameters, media parameters, rewritten numbers A and B) based on src info (A num, SRC ip, SRC media pameters) and DST num?
>  
>  
> Thanks,
> Georgy
>  
>  
> From: freeswitch-users-bounces at lists.freeswitch.org [mailto:freeswitch-users-bounces at lists.freeswitch.org]On Behalf Of David Ponzone
> Sent: Tuesday, April 26, 2011 8:53 AM
> To: FreeSWITCH Users Help
> Subject: Re: [Freeswitch-users] SIP router/switch only configuratoin advice?
>  
> Georgy,
>  
> the first thing you ask is trivial.
> Basically, you may have one dialplan (one context) per client endpoint.
> There is 2 ways to bind a context to a client:
> -if the client registers, the context is configured in the user config (in directory/)
> -if the client does not register, you fall back to IP-auth. So you can add an ACL to the SIP profile, for security, and then in the dialplan for this SIP profile, you should add rules testing the SRC IP (variable network_addr in FreeSWITCH XML dialplan) and transfering to the right context.
>  
> This way, you will have one specific context file per client, so you can have very specific routing rules per client.
> Of course, you may use the same context for several clients.
>  
> I really recommend you dig a little bit for yourself in the wiki in order to setup this configuration.
> This will provide you with the necessary understanding of FreeSWITCH to operate it.
>  
> For the second part of your question, you may need mod_lcr.
> I never used, but a lot of people around use it.
> I am not sure it does prepaid/credit-limit.
> For that, you can use the "simple" nibblebill, but it needs some hacking to manage various rates per destination prefix.
> Or use an external prepaid software.
>  
> David Ponzone  Direction Technique
> email: david.ponzone at ipeva.fr
> tel:      01 74 03 18 97
> gsm:   06 66 98 76 34
>  
> Service Client IPeva
> tel:      0811 46 26 26
> www.ipeva.fr  -   www.ipeva-studio.com
>  
> Ce message et toutes les pièces jointes sont confidentiels et établis à l'intention exclusive de ses destinataires. Toute utilisation ou diffusion non autorisée est interdite. Tout message électronique est susceptible d'altération. IPeva décline toute responsabilité au titre de ce message s'il a été altéré, déformé ou falsifié. Si vous n'êtes pas destinataire de ce message, merci de le détruire immédiatement et d'avertir l'expéditeur.
>  
> 
> 
>  
> Le 25/04/2011 à 21:55, Georgy Goshin a écrit :
> 
> 
> Hello!
> 
> I need some advice from experienced FreeSWITCH users. Please review my needs
> and advise me some configuration samples or adapted configuration  guides.
> I'd like to use the FS in two roles - a SIP router for my PBXes and as a
> wholesale switch. Both configurations are almost the same in my case. The
> desired configuration should be allow me to do the following:
> 
> route calls based on A num, B num, SRC IP (Mera MVTS is an example of what I
> want in simple calls routing).
> 
> If a more complex configuration that can do dynamic routing based on price,
> acd/asr and prepaid/credit-limit billing is possible too, I'd be glad to see
> some examples too.
> 
> 
> Thanks in advance,
> G. Goshin.
> 
> 
> _______________________________________________
> FreeSWITCH-users mailing list
> FreeSWITCH-users at lists.freeswitch.org
> http://lists.freeswitch.org/mailman/listinfo/freeswitch-users
> UNSUBSCRIBE:http://lists.freeswitch.org/mailman/options/freeswitch-users
> http://www.freeswitch.org
>  
> _______________________________________________
> FreeSWITCH-users mailing list
> FreeSWITCH-users at lists.freeswitch.org
> http://lists.freeswitch.org/mailman/listinfo/freeswitch-users
> UNSUBSCRIBE:http://lists.freeswitch.org/mailman/options/freeswitch-users
> http://www.freeswitch.org

-------------- next part --------------
An HTML attachment was scrubbed...
URL: http://lists.freeswitch.org/pipermail/freeswitch-users/attachments/20110426/c8676c50/attachment-0001.html