[Freeswitch-users] fax and jpg to tiff

Madovsky infos at madovsky.org
Thu Apr 14 19:20:30 MSD 2011 

Hi Steve,

if you talk about this line
> Image width (200 pixels) not an acceptable FAX image width
I tried many different size but it says always the same.
what image width is acceptable usually ?

Thanks

----- Original Message ----- 
From: "Steve Underwood" <steveu at coppice.org>
To: "FreeSWITCH Users Help" <freeswitch-users at lists.freeswitch.org>
Sent: Thursday, April 14, 2011 9:25 AM
Subject: Re: [Freeswitch-users] fax and jpg to tiff


> Hi Madovsky,
> 
> Your log says very clearly what is wrong with the file you are trying to 
> send. What further information are you looking for?
> 
> Steve
> 
> 
> On 04/14/2011 12:05 PM, Madovsky wrote:
>> is there the spandsp log
>> 2011-04-14 00:03:30.484254 [DEBUG] mod_spandsp_fax.c:296 FLOW T.30   
>> .... ...0= Store and forward Internet fax (T.37): Not set
>> 2011-04-14 00:03:30.484254 [DEBUG] mod_spandsp_fax.c:296 FLOW T.30   
>> .... .0..= Real-time Internet fax (T.38): Not set
>> 2011-04-14 00:03:30.484254 [DEBUG] mod_spandsp_fax.c:296 FLOW T.30   
>> .... 0...= 3G mobile network: Not set
>> 2011-04-14 00:03:30.484254 [DEBUG] mod_spandsp_fax.c:296 FLOW T.30   
>> ..0. ....= V.8 capabilities: Not set
>> 2011-04-14 00:03:30.484254 [DEBUG] mod_spandsp_fax.c:296 FLOW T.30   
>> .0.. ....= Preferred octets: 256 octets
>> 2011-04-14 00:03:30.484254 [DEBUG] mod_spandsp_fax.c:296 FLOW T.30   
>> .... ...0= Ready to transmit a fax document (polling): Not set
>> 2011-04-14 00:03:30.484254 [DEBUG] mod_spandsp_fax.c:296 FLOW T.30   
>> .... ..1.= Can receive fax: Set
>> 2011-04-14 00:03:30.484254 [DEBUG] mod_spandsp_fax.c:296 FLOW T.30   
>> ..10 11..= Supported data signalling rates: V.27 ter, V.29, and V.17
>> 2011-04-14 00:03:30.484254 [DEBUG] mod_spandsp_fax.c:296 FLOW T.30   
>> .1.. ....= R8x7.7lines/mm and/or 200x200pels/25.4mm: Set
>> 2011-04-14 00:03:30.484254 [DEBUG] mod_spandsp_fax.c:296 FLOW T.30   
>> 1... ....= 2-D coding: Set
>> 2011-04-14 00:03:30.484254 [DEBUG] mod_spandsp_fax.c:296 FLOW T.30   
>> .... ..00= Recording width: 215mm +- 1%
>> 2011-04-14 00:03:30.484254 [DEBUG] mod_spandsp_fax.c:296 FLOW T.30   
>> .... 10..= Recording length: Unlimited
>> 2011-04-14 00:03:30.484254 [DEBUG] mod_spandsp_fax.c:296 FLOW T.30   
>> .111 ....= Receiver's minimum scan line time: 0ms at 3.85 l/mm; T7.7 = 
>> T3.85
>> 2011-04-14 00:03:30.484254 [DEBUG] mod_spandsp_fax.c:296 FLOW T.30   
>> 1... ....= Extension indicator: Set
>> 2011-04-14 00:03:30.484254 [DEBUG] mod_spandsp_fax.c:296 FLOW T.30   
>> .... ..0.= Compressed/uncompressed mode: Compressed
>> 2011-04-14 00:03:30.484254 [DEBUG] mod_spandsp_fax.c:296 FLOW T.30   
>> .... .0..= Error correction mode (ECM): Non-ECM
>> 2011-04-14 00:03:30.484254 [DEBUG] mod_spandsp_fax.c:296 FLOW T.30   
>> .0.. ....= T.6 coding: Not set
>> 2011-04-14 00:03:30.484254 [DEBUG] mod_spandsp_fax.c:296 FLOW T.30   
>> 1... ....= Extension indicator: Set
>> 2011-04-14 00:03:30.484254 [DEBUG] mod_spandsp_fax.c:296 FLOW T.30   
>> .... ...0= "Field not valid" supported: Not set
>> 2011-04-14 00:03:30.484254 [DEBUG] mod_spandsp_fax.c:296 FLOW T.30   
>> .... ..0.= Multiple selective polling: Not set
>> 2011-04-14 00:03:30.484254 [DEBUG] mod_spandsp_fax.c:296 FLOW T.30   
>> .... .0..= Polled sub-address: Not set
>> 2011-04-14 00:03:30.484254 [DEBUG] mod_spandsp_fax.c:296 FLOW T.30   
>> .... 0...= T.43 coding: Not set
>> 2011-04-14 00:03:30.484254 [DEBUG] mod_spandsp_fax.c:296 FLOW T.30   
>> ...0 ....= Plane interleave: Not set
>> 2011-04-14 00:03:30.484254 [DEBUG] mod_spandsp_fax.c:296 FLOW T.30   
>> ..0. ....= Voice coding with 32kbit/s ADPCM (Rec. G.726): Not set
>> 2011-04-14 00:03:30.484254 [DEBUG] mod_spandsp_fax.c:296 FLOW T.30   
>> .0.. ....= Reserved for the use of extended voice coding set: Not set
>> 2011-04-14 00:03:30.484254 [DEBUG] mod_spandsp_fax.c:296 FLOW T.30   
>> 1... ....= Extension indicator: Set
>> 2011-04-14 00:03:30.484254 [DEBUG] mod_spandsp_fax.c:296 FLOW T.30   
>> .... ...1= R8x15.4lines/mm: Set
>> 2011-04-14 00:03:30.484254 [DEBUG] mod_spandsp_fax.c:296 FLOW T.30   
>> .... ..0.= 300x300pels/25.4mm: Not set
>> 2011-04-14 00:03:30.484254 [DEBUG] mod_spandsp_fax.c:296 FLOW T.30   
>> .... .0..= R16x15.4lines/mm and/or 400x400pels/25.4mm: Not set
>> 2011-04-14 00:03:30.484254 [DEBUG] mod_spandsp_fax.c:296 FLOW T.30   
>> .... 0...= Inch-based resolution preferred: Not set
>> 2011-04-14 00:03:30.484254 [DEBUG] mod_spandsp_fax.c:296 FLOW T.30   
>> ...1 ....= Metric-based resolution preferred: Set
>> 2011-04-14 00:03:30.484254 [DEBUG] mod_spandsp_fax.c:296 FLOW T.30   
>> ..0. ....= Minimum scan line time for higher resolutions: T15.4 = T7.7
>> 2011-04-14 00:03:30.484254 [DEBUG] mod_spandsp_fax.c:296 FLOW T.30   
>> .0.. ....= Selective polling: Not set
>> 2011-04-14 00:03:30.484254 [DEBUG] mod_spandsp_fax.c:296 FLOW T.30   
>> 1... ....= Extension indicator: Set
>> 2011-04-14 00:03:30.484254 [DEBUG] mod_spandsp_fax.c:296 FLOW T.30   
>> .... ...1= Sub-addressing: Set
>> 2011-04-14 00:03:30.484254 [DEBUG] mod_spandsp_fax.c:296 FLOW T.30   
>> .... ..0.= Password: Not set
>> 2011-04-14 00:03:30.484254 [DEBUG] mod_spandsp_fax.c:296 FLOW T.30   
>> .... .0..= Ready to transmit a data file (polling): Not set
>> 2011-04-14 00:03:30.484254 [DEBUG] mod_spandsp_fax.c:296 FLOW T.30   
>> ...0 ....= Binary file transfer (BFT): Not set
>> 2011-04-14 00:03:30.484254 [DEBUG] mod_spandsp_fax.c:296 FLOW T.30   
>> ..0. ....= Document transfer mode (DTM): Not set
>> 2011-04-14 00:03:30.484254 [DEBUG] mod_spandsp_fax.c:296 FLOW T.30   
>> .0.. ....= Electronic data interchange (EDI): Not set
>> 2011-04-14 00:03:30.484254 [DEBUG] mod_spandsp_fax.c:296 FLOW T.30   
>> 0... ....= Extension indicator: Not set
>> 2011-04-14 00:03:30.484254 [DEBUG] mod_spandsp_fax.c:296 FLOW T.30 
>> Selected compression T.4 2-D (2)
>> 2011-04-14 00:03:30.484254 [DEBUG] mod_spandsp_fax.c:296 FLOW T.30 
>> Trying to send file '/1302753792.tiff'
>> 2011-04-14 00:03:30.484254 [DEBUG] mod_spandsp_fax.c:296 FLOW T.30 
>> Start sending document
>> 2011-04-14 00:03:30.484254 [DEBUG] mod_spandsp_fax.c:296 FLOW T.30 
>> Minimum bits per row will be 0
>> 2011-04-14 00:03:30.484254 [DEBUG] mod_spandsp_fax.c:296 FLOW T.30 
>> Starting page 1 of transfer
>> 2011-04-14 00:03:30.484254 [DEBUG] mod_spandsp_fax.c:296 FLOW T.30 
>> Image width (200 pixels) not an acceptable FAX image width
>> 2011-04-14 00:03:30.484254 [DEBUG] mod_spandsp_fax.c:296 FLOW T.30 The 
>> far end is incompatible
>> 2011-04-14 00:03:30.484254 [DEBUG] mod_spandsp_fax.c:296 FLOW T.30 
>> Changing from state 18 to 3
>> 2011-04-14 00:03:30.484254 [DEBUG] mod_spandsp_fax.c:296 FLOW T.30 
>> Tx:  DCN with final frame tag
>> 2011-04-14 00:03:30.484254 [DEBUG] mod_spandsp_fax.c:296 FLOW T.30 
>> Tx:  ff 13 fb
>> 2011-04-14 00:03:30.564178 [DEBUG] mod_spandsp_fax.c:296 FLOW T.30 
>> HDLC signal status is Carrier down (-1) in state 3
>> 2011-04-14 00:03:30.564178 [DEBUG] mod_spandsp_fax.c:296 FLOW T.30 
>> Changing from phase T30_PHASE_B_RX to T30_PHASE_D_TX
>> 2011-04-14 00:03:30.564178 [DEBUG] mod_spandsp_fax.c:296 FLOW FAX Set 
>> rx type 0
>> 2011-04-14 00:03:30.564178 [DEBUG] mod_spandsp_fax.c:296 FLOW FAX Set 
>> tx type 4
>> 2011-04-14 00:03:31.624981 [DEBUG] mod_spandsp_fax.c:296 FLOW T.30 
>> Send complete in phase T30_PHASE_D_TX, state 3
>> 2011-04-14 00:03:31.705007 [DEBUG] mod_spandsp_fax.c:296 FLOW T.30 
>> Send complete in phase T30_PHASE_D_TX, state 3
>> 2011-04-14 00:03:31.705007 [DEBUG] mod_spandsp_fax.c:296 FLOW T.30 
>> Disconnecting
>> 2011-04-14 00:03:31.705007 [DEBUG] mod_spandsp_fax.c:296 FLOW T.30 
>> Changing from phase T30_PHASE_D_TX to T30_PHASE_E
>> 2011-04-14 00:03:31.705007 [DEBUG] mod_spandsp_fax.c:296 FLOW FAX Set 
>> rx type 0
>> 2011-04-14 00:03:31.705007 [DEBUG] mod_spandsp_fax.c:296 FLOW FAX Set 
>> tx type 1
>> 2011-04-14 00:03:31.705007 [DEBUG] mod_spandsp_fax.c:296 FLOW T.30 
>> Changing from state 3 to 2
>> 2011-04-14 00:03:32.704744 [DEBUG] mod_spandsp_fax.c:296 FLOW T.30 
>> Send complete in phase T30_PHASE_E, state 2
>>
>>     ----- Original Message -----
>>     *From:* Madovsky <mailto:infos at madovsky.org>
>>     *To:* freeswitch-users at lists.freeswitch.org
>>     <mailto:freeswitch-users at lists.freeswitch.org>
>>     *Sent:* Wednesday, April 13, 2011 11:33 PM
>>     *Subject:* fax and jpg to tiff
>>
>>     sorry I don't have the personal email of
>>     Steve Underwood (I saw a thread of him related of this subject),
>>     it's about a problem
>>     of spandsp txfax and jpeg files.
>>     I didn't succeed to find the right conversion to make the far end
>>     accept the fax.
>>     I get always "far end cannot receive at the size of the image".
>>     this problems occurs only from jpeg to tiff conversion.
>>     I use imagemagick for that :
>>     sudo /usr/bin/convert -page Letter -density 204x196 -resize
>>     1728x1184 -units pixelsperinch -monochrome -compress Fax
>>     <fileToConvert> <fileToSave>
>>     I tried numrous options but no luck.
>>     Thanks
>>
>>
> 
> 
> _______________________________________________
> FreeSWITCH-users mailing list
> FreeSWITCH-users at lists.freeswitch.org
> http://lists.freeswitch.org/mailman/listinfo/freeswitch-users
> UNSUBSCRIBE:http://lists.freeswitch.org/mailman/options/freeswitch-users
> http://www.freeswitch.org

More information about the FreeSWITCH-users mailing list