[Freeswitch-users] fax and jpg to tiff

Thu Apr 14 17:25:45 MSD 2011

Hi Madovsky,

Your log says very clearly what is wrong with the file you are trying to 
send. What further information are you looking for?

Steve

On 04/14/2011 12:05 PM, Madovsky wrote:
> is there the spandsp log
> 2011-04-14 00:03:30.484254 [DEBUG] mod_spandsp_fax.c:296 FLOW T.30   
> .... ...0= Store and forward Internet fax (T.37): Not set
> 2011-04-14 00:03:30.484254 [DEBUG] mod_spandsp_fax.c:296 FLOW T.30   
> .... .0..= Real-time Internet fax (T.38): Not set
> 2011-04-14 00:03:30.484254 [DEBUG] mod_spandsp_fax.c:296 FLOW T.30   
> .... 0...= 3G mobile network: Not set
> 2011-04-14 00:03:30.484254 [DEBUG] mod_spandsp_fax.c:296 FLOW T.30   
> ..0. ....= V.8 capabilities: Not set
> 2011-04-14 00:03:30.484254 [DEBUG] mod_spandsp_fax.c:296 FLOW T.30   
> .0.. ....= Preferred octets: 256 octets
> 2011-04-14 00:03:30.484254 [DEBUG] mod_spandsp_fax.c:296 FLOW T.30   
> .... ...0= Ready to transmit a fax document (polling): Not set
> 2011-04-14 00:03:30.484254 [DEBUG] mod_spandsp_fax.c:296 FLOW T.30   
> .... ..1.= Can receive fax: Set
> 2011-04-14 00:03:30.484254 [DEBUG] mod_spandsp_fax.c:296 FLOW T.30   
> ..10 11..= Supported data signalling rates: V.27 ter, V.29, and V.17
> 2011-04-14 00:03:30.484254 [DEBUG] mod_spandsp_fax.c:296 FLOW T.30   
> .1.. ....= R8x7.7lines/mm and/or 200x200pels/25.4mm: Set
> 2011-04-14 00:03:30.484254 [DEBUG] mod_spandsp_fax.c:296 FLOW T.30   
> 1... ....= 2-D coding: Set
> 2011-04-14 00:03:30.484254 [DEBUG] mod_spandsp_fax.c:296 FLOW T.30   
> .... ..00= Recording width: 215mm +- 1%
> 2011-04-14 00:03:30.484254 [DEBUG] mod_spandsp_fax.c:296 FLOW T.30   
> .... 10..= Recording length: Unlimited
> 2011-04-14 00:03:30.484254 [DEBUG] mod_spandsp_fax.c:296 FLOW T.30   
> .111 ....= Receiver's minimum scan line time: 0ms at 3.85 l/mm; T7.7 = 
> T3.85
> 2011-04-14 00:03:30.484254 [DEBUG] mod_spandsp_fax.c:296 FLOW T.30   
> 1... ....= Extension indicator: Set
> 2011-04-14 00:03:30.484254 [DEBUG] mod_spandsp_fax.c:296 FLOW T.30   
> .... ..0.= Compressed/uncompressed mode: Compressed
> 2011-04-14 00:03:30.484254 [DEBUG] mod_spandsp_fax.c:296 FLOW T.30   
> .... .0..= Error correction mode (ECM): Non-ECM
> 2011-04-14 00:03:30.484254 [DEBUG] mod_spandsp_fax.c:296 FLOW T.30   
> .0.. ....= T.6 coding: Not set
> 2011-04-14 00:03:30.484254 [DEBUG] mod_spandsp_fax.c:296 FLOW T.30   
> 1... ....= Extension indicator: Set
> 2011-04-14 00:03:30.484254 [DEBUG] mod_spandsp_fax.c:296 FLOW T.30   
> .... ...0= "Field not valid" supported: Not set
> 2011-04-14 00:03:30.484254 [DEBUG] mod_spandsp_fax.c:296 FLOW T.30   
> .... ..0.= Multiple selective polling: Not set
> 2011-04-14 00:03:30.484254 [DEBUG] mod_spandsp_fax.c:296 FLOW T.30   
> .... .0..= Polled sub-address: Not set
> 2011-04-14 00:03:30.484254 [DEBUG] mod_spandsp_fax.c:296 FLOW T.30   
> .... 0...= T.43 coding: Not set
> 2011-04-14 00:03:30.484254 [DEBUG] mod_spandsp_fax.c:296 FLOW T.30   
> ...0 ....= Plane interleave: Not set
> 2011-04-14 00:03:30.484254 [DEBUG] mod_spandsp_fax.c:296 FLOW T.30   
> ..0. ....= Voice coding with 32kbit/s ADPCM (Rec. G.726): Not set
> 2011-04-14 00:03:30.484254 [DEBUG] mod_spandsp_fax.c:296 FLOW T.30   
> .0.. ....= Reserved for the use of extended voice coding set: Not set
> 2011-04-14 00:03:30.484254 [DEBUG] mod_spandsp_fax.c:296 FLOW T.30   
> 1... ....= Extension indicator: Set
> 2011-04-14 00:03:30.484254 [DEBUG] mod_spandsp_fax.c:296 FLOW T.30   
> .... ...1= R8x15.4lines/mm: Set
> 2011-04-14 00:03:30.484254 [DEBUG] mod_spandsp_fax.c:296 FLOW T.30   
> .... ..0.= 300x300pels/25.4mm: Not set
> 2011-04-14 00:03:30.484254 [DEBUG] mod_spandsp_fax.c:296 FLOW T.30   
> .... .0..= R16x15.4lines/mm and/or 400x400pels/25.4mm: Not set
> 2011-04-14 00:03:30.484254 [DEBUG] mod_spandsp_fax.c:296 FLOW T.30   
> .... 0...= Inch-based resolution preferred: Not set
> 2011-04-14 00:03:30.484254 [DEBUG] mod_spandsp_fax.c:296 FLOW T.30   
> ...1 ....= Metric-based resolution preferred: Set
> 2011-04-14 00:03:30.484254 [DEBUG] mod_spandsp_fax.c:296 FLOW T.30   
> ..0. ....= Minimum scan line time for higher resolutions: T15.4 = T7.7
> 2011-04-14 00:03:30.484254 [DEBUG] mod_spandsp_fax.c:296 FLOW T.30   
> .0.. ....= Selective polling: Not set
> 2011-04-14 00:03:30.484254 [DEBUG] mod_spandsp_fax.c:296 FLOW T.30   
> 1... ....= Extension indicator: Set
> 2011-04-14 00:03:30.484254 [DEBUG] mod_spandsp_fax.c:296 FLOW T.30   
> .... ...1= Sub-addressing: Set
> 2011-04-14 00:03:30.484254 [DEBUG] mod_spandsp_fax.c:296 FLOW T.30   
> .... ..0.= Password: Not set
> 2011-04-14 00:03:30.484254 [DEBUG] mod_spandsp_fax.c:296 FLOW T.30   
> .... .0..= Ready to transmit a data file (polling): Not set
> 2011-04-14 00:03:30.484254 [DEBUG] mod_spandsp_fax.c:296 FLOW T.30   
> ...0 ....= Binary file transfer (BFT): Not set
> 2011-04-14 00:03:30.484254 [DEBUG] mod_spandsp_fax.c:296 FLOW T.30   
> ..0. ....= Document transfer mode (DTM): Not set
> 2011-04-14 00:03:30.484254 [DEBUG] mod_spandsp_fax.c:296 FLOW T.30   
> .0.. ....= Electronic data interchange (EDI): Not set
> 2011-04-14 00:03:30.484254 [DEBUG] mod_spandsp_fax.c:296 FLOW T.30   
> 0... ....= Extension indicator: Not set
> 2011-04-14 00:03:30.484254 [DEBUG] mod_spandsp_fax.c:296 FLOW T.30 
> Selected compression T.4 2-D (2)
> 2011-04-14 00:03:30.484254 [DEBUG] mod_spandsp_fax.c:296 FLOW T.30 
> Trying to send file '/1302753792.tiff'
> 2011-04-14 00:03:30.484254 [DEBUG] mod_spandsp_fax.c:296 FLOW T.30 
> Start sending document
> 2011-04-14 00:03:30.484254 [DEBUG] mod_spandsp_fax.c:296 FLOW T.30 
> Minimum bits per row will be 0
> 2011-04-14 00:03:30.484254 [DEBUG] mod_spandsp_fax.c:296 FLOW T.30 
> Starting page 1 of transfer
> 2011-04-14 00:03:30.484254 [DEBUG] mod_spandsp_fax.c:296 FLOW T.30 
> Image width (200 pixels) not an acceptable FAX image width
> 2011-04-14 00:03:30.484254 [DEBUG] mod_spandsp_fax.c:296 FLOW T.30 The 
> far end is incompatible
> 2011-04-14 00:03:30.484254 [DEBUG] mod_spandsp_fax.c:296 FLOW T.30 
> Changing from state 18 to 3
> 2011-04-14 00:03:30.484254 [DEBUG] mod_spandsp_fax.c:296 FLOW T.30 
> Tx:  DCN with final frame tag
> 2011-04-14 00:03:30.484254 [DEBUG] mod_spandsp_fax.c:296 FLOW T.30 
> Tx:  ff 13 fb
> 2011-04-14 00:03:30.564178 [DEBUG] mod_spandsp_fax.c:296 FLOW T.30 
> HDLC signal status is Carrier down (-1) in state 3
> 2011-04-14 00:03:30.564178 [DEBUG] mod_spandsp_fax.c:296 FLOW T.30 
> Changing from phase T30_PHASE_B_RX to T30_PHASE_D_TX
> 2011-04-14 00:03:30.564178 [DEBUG] mod_spandsp_fax.c:296 FLOW FAX Set 
> rx type 0
> 2011-04-14 00:03:30.564178 [DEBUG] mod_spandsp_fax.c:296 FLOW FAX Set 
> tx type 4
> 2011-04-14 00:03:31.624981 [DEBUG] mod_spandsp_fax.c:296 FLOW T.30 
> Send complete in phase T30_PHASE_D_TX, state 3
> 2011-04-14 00:03:31.705007 [DEBUG] mod_spandsp_fax.c:296 FLOW T.30 
> Send complete in phase T30_PHASE_D_TX, state 3
> 2011-04-14 00:03:31.705007 [DEBUG] mod_spandsp_fax.c:296 FLOW T.30 
> Disconnecting
> 2011-04-14 00:03:31.705007 [DEBUG] mod_spandsp_fax.c:296 FLOW T.30 
> Changing from phase T30_PHASE_D_TX to T30_PHASE_E
> 2011-04-14 00:03:31.705007 [DEBUG] mod_spandsp_fax.c:296 FLOW FAX Set 
> rx type 0
> 2011-04-14 00:03:31.705007 [DEBUG] mod_spandsp_fax.c:296 FLOW FAX Set 
> tx type 1
> 2011-04-14 00:03:31.705007 [DEBUG] mod_spandsp_fax.c:296 FLOW T.30 
> Changing from state 3 to 2
> 2011-04-14 00:03:32.704744 [DEBUG] mod_spandsp_fax.c:296 FLOW T.30 
> Send complete in phase T30_PHASE_E, state 2
>
>     ----- Original Message -----
>     *From:* Madovsky <mailto:infos at madovsky.org>
>     *To:* freeswitch-users at lists.freeswitch.org
>     <mailto:freeswitch-users at lists.freeswitch.org>
>     *Sent:* Wednesday, April 13, 2011 11:33 PM
>     *Subject:* fax and jpg to tiff
>
>     sorry I don't have the personal email of
>     Steve Underwood (I saw a thread of him related of this subject),
>     it's about a problem
>     of spandsp txfax and jpeg files.
>     I didn't succeed to find the right conversion to make the far end
>     accept the fax.
>     I get always "far end cannot receive at the size of the image".
>     this problems occurs only from jpeg to tiff conversion.
>     I use imagemagick for that :
>     sudo /usr/bin/convert -page Letter -density 204x196 -resize
>     1728x1184 -units pixelsperinch -monochrome -compress Fax
>     <fileToConvert> <fileToSave>
>     I tried numrous options but no luck.
>     Thanks
>
>