[Freeswitch-users] Struggling with installing.

Sun Sep 26 00:12:03 PDT 2010

All I did was change the string.h code and it build for me, seems like
there are superfluous steps. Just change the code.

On Sep 25, 2010, at 9:08 AM, Steve Underwood <steveu at coppice.org> wrote:

>  Hi Mario,
>
> Your installation procedure is truly bizarre. Appropriate versions of
> LibTIFF and spandsp are in FreeSwitch. Why are you downloading versions
> from elsewhere? On other platforms these versions are built and
> installed automatically, as part of the standard FreeSwitch build
> sequence. I have no idea why they are not building for you.
>
> Steve
>
>
> On 09/25/2010 11:47 PM, Mario wrote:
>> I think the thread title should have osx in it? Anyone see a problem or
>> want to add something is welcome to mention it.
>>
>> Since David Ponzone says we need SPANDSP I struggled through it on osx
>> 10.6.4. It took a lot of searching and trial and error. Here is the
>> updated info to get a complete clean install with what looks like
>> everything you need on osx. If I knew how to put things up on the wiki I
>> would. Anyone is welcome to take this info:
>>
>> This may help someone install FS on osx 10.6.4 as of Sep
>> 2010. I used the git version for this:
>>
>> A. If you want the git version download and install git from
>> http://code.google.com/p/git-osx-installer/
>>
>> B. Download FreeSwitch using the online instructions or the book.
>>
>> INSTALL LIBTIFF NEEDED FOR LIBJPEG&  SPANDSP:
>> 1. Download liftoff 3.9.4 from http://download.osgeo.org/libtiff/ and
>> decompress into whatever directory you want. No need to put into same
>> DIR as anything else.
>> 2. cd ...../tiff-3.9.4
>> 3. ./configure
>>     make
>>     make install
>>
>> 4. cd ..<- back to higher directory
>>
>> INSTALL LIBJPEG NEEDED FOR SPANDSP:
>> IMPORTANT: Most searches will find libjpeg-6, DO NOT USE IT! It took
>> several hours of trying to load it on osx and never got it to work. V7
>> was a snap. See:
>> http://proteus-tech.com/blog/cwt/install-pil-in-snow-leopard/
>> 5. Download libjpeg at www.ijg.org/files/jpegsrc.v7.tar.gz
>> 6. Double click to uncompress or tar zxvf jpegsrc.v7.tar.gz then move to
>> directory you want. No need to put into same DIR as anything else.
>> 7. cd .../jpeg-7
>> 8. ./configure --enable-shared --enable-static
>> 9. make
>> 10. sudo make install
>>
>> 11. cd ..<- back to higher directory
>>
>> INSTALL SPANDSP
>> 12. Download spandsp 0.0.6 from
>> http://www.soft-switch.org/downloads/spandsp/
>> 13. Double click to uncompress then move to directory you want. No need
>> to put into same DIR as anything else.
>> 13. cd .../spandsp 0.0.6
>> 14 ./configure
>> 15  make
>> 16. make install
>>
>>
>> FIX FLITE COMPILE PROBLEM (looks like David Ponzone can fix this see below).
>> 17. cp /usr/include/string.h /freeswitch/libs/flite-1.3.99/include
>> This is what is causing flite to fail during make. See these:
>> http://lists.berlios.de/pipermail/festlang-talk/2008-June/001043.html
>> http://www.clas.ufl.edu/users/mpanning/OSX.html
>> 18. CD to /freeswitch/libs/flite-1.3.99/include
>> 19. chmod +rw+rw+rw string.h<- So you can update the file.
>> 20. Edit (in xCode) string.h, find "swab" and change line:
>> void swab(const void * __restrict, void * __restrict, ssize_t);
>>                to (comment the line):
>> /*void swab(const void * __restrict, void * __restrict, ssize_t);*/
>> 21. CD /freeswitch
>> 22. Follow normal install instructions (bootstrap, config).
>> 23. MAKE
>> 24. SUDO MAKE INSTALL<- SUDO was required for this
>>
>> So far so good....
>>
>>
>> On 09/24/10 11:49, David Ponzone wrote:
>>> Mario,
>>>
>>> actually, no.
>>> spandsp contains all basic codecs: G726, G722, ADPCM, GSM, LPC-10.
>>>
>>> David Ponzone  Direction Technique
>>> email: david.ponzone at ipeva.fr<mailto:david.ponzone at ipeva.fr>
>>> tel:      01 74 03 18 97
>>> gsm:   06 66 98 76 34
>>>
>>> Service Client IPeva
>>> tel:      0811 46 26 26
>>> www.ipeva.fr<BLOCKED::http://www.ipeva.fr/>   -   www.ipeva-studio.com
>>> <BLOCKED::http://www.ipeva-studio.com/>
>>>
>>> /Ce message et toutes les pièces jointes sont confidentiels et établis à
>>> l'intention exclusive de ses destinataires. Toute utilisation ou
>>> diffusion non autorisée est interdite. Tout message électronique est
>>> susceptible d'altération. /*/IPeva/*/ décline toute responsabilité au
>>> titre de ce message s'il a été altéré, déformé ou falsifié. Si vous
>>> n'êtes pas destinataire de ce message, merci de le détruire
>>> immédiatement et d'avertir l'expéditeur./
>>> /
>>> /
>>>> On 09/24/10 10:09, Brian West wrote:
>>>>> Don't build mod_flite on 10.5 for right now... or get the patch off
>>>>> jira and apply it.. i haven't had time to reroll it.
>>>>>
>>>>>> On Sep 24, 2010, at 11:41 AM, Mario wrote:
>>>>>> I am in the same boat, new to FreeSwitch, setup first on an old Linux
>>>>>> box (going pretty well), with plans to go Mac Mini. I tried to install
>>>>>> on OSX and first got the MOD_SPANDSP missing issue. Since I could not
>>>>>> find a way to install that on OSX I took it out of the modules.conf to
>>>>>> see how far I would get, thinking it's only for fax? But then I got the
>>>>>> same error for flite you have below. Hopefully someone here may have
>>>>>> already been through this and will shed some light on it. I am working
>>>>>> on it right now and if I find anything I will post.
>> _______________________________________________
>> FreeSWITCH-users mailing list
>> FreeSWITCH-users at lists.freeswitch.org
>> http://lists.freeswitch.org/mailman/listinfo/freeswitch-users
>> UNSUBSCRIBE:http://lists.freeswitch.org/mailman/options/freeswitch-users
>> http://www.freeswitch.org
>>
>
>
> _______________________________________________
> FreeSWITCH-users mailing list
> FreeSWITCH-users at lists.freeswitch.org
> http://lists.freeswitch.org/mailman/listinfo/freeswitch-users
> UNSUBSCRIBE:http://lists.freeswitch.org/mailman/options/freeswitch-users
> http://www.freeswitch.org