[Freeswitch-users] Freeswitch - mod_skypopen fail
Giovanni Maruzzelli
gmaruzz at gmail.com
Sun Sep 19 03:43:56 PDT 2010
Dear Shamun,
your "problem" is clearly described in the error you are posting.
Also, the wiki page clearly describe how and what you have to do.
I feel you are abusing the mailing list, the community and me personally.
Do your homework or pay a consultant if you don't like to read wiki and errors.
I will no more answer your questions if you continue in this behavior.
-giovanni
On 9/19/10, Shamun toha md <shamun.toha at gmail.com> wrote:
> Now i arrange to start it atleast, but gets failed, how do you fix this?
>
> freeswitch at localhost.localdomain> load mod_skypopen
> 2010-09-19 13:14:53.038402 [WARNING] mod_skypopen.c:1542 rev
> git2svn-syncpoint-master-203-g3eb35a5[(nil)|37 ][WARNINGA 1542
> ][interface1][-1, 0, 0] STARTING interface_id=1
> 2010-09-19 13:14:53.242399 [NOTICE] mod_skypopen.c:1567 rev
> git2svn-syncpoint-master-203-g3eb35a5[(nil)|37 ][NOTICA 1567
> ][interface1][-1, 0, 0] WAITING roughly 10 seconds to find a running Skype
> client and connect to its SKYPE API for interface_id=1
> 2010-09-19 13:14:53.242399 [NOTICE] mod_skypopen.c:1576 rev
> git2svn-syncpoint-master-203-g3eb35a5[(nil)|37 ][NOTICA 1576
> ][interface1][-1, 0, 0] Found a running Skype client, connected to its SKYPE
> API for interface_id=1, waiting 60 seconds for CURRENTUSERHANDLE==notwork1
>
> 2010-09-19 13:15:54.868242 [ERR] mod_skypopen.c:1620 rev
> git2svn-syncpoint-master-203-g3eb35a5[(nil)|37 ][ERRORA 1620
> ][interface1][-1, 0, 0] The Skype client to which we are connected FAILED to
> gave us CURRENTUSERHANDLE=notwork1, interface_id=1 FAILED to start. No Skype
> client logged in as 'notwork1' has been found. Please (re)launch a Skype
> client logged in as 'notwork1'. Skypopen exiting now
>
> -ERR [module load file routine returned an error]
>
> 2010-09-19 13:15:54.868242 [CRIT] switch_loadable_module.c:926 Error Loading
> module /usr/local/freeswitch/mod/mod_skypopen.so
> **Module load routine returned an error**
> freeswitch at localhost.localdomain> 2010-09-19 13:15:54.965251 [NOTICE]
> skypopen_protocol.c:1754 rev
> git2svn-syncpoint-master-203-g3eb35a5[(nil)|37 ][NOTICA 1754
> ][interface1][-1, 0, 0] EXITING
>
>
>
>
>
> On Sat, Sep 18, 2010 at 7:51 PM, Giovanni Maruzzelli
> <gmaruzz at gmail.com>wrote:
>
>> What is your problem Shamun?
>>
>> You don't know how to read?
>>
>> In what you report is written:
>>
>> "open of skypopen.conf failed"
>>
>>
>>
>> On 9/18/10, Shamun toha md <shamun.toha at gmail.com> wrote:
>> > You are correct, even without alsa driver, if i simply start skype GUI
>> > instance from ssh -X servermachine, i can see skype get started without
>> > getting fail or crash. But if i "load mod_skypeopen", why it is getting
>> > again error like this?
>> >
>> > *freeswitch at localhost.localdomain> *
>> > 2010-09-18 19:05:08.243932 [CONSOLE] switch_core.c:1649
>> > FreeSWITCH Version 1.0.head (*git-3eb35a5 2010-09-15 17-04-54 -0500*)
>> > Started.
>> > Max Sessions[1000]
>> > Session Rate[30]
>> > SQL [Enabled]
>> >
>> > *freeswitch at localhost.localdomain> load mod_skypopen*
>> >
>> > -ERR [module load file routine returned an error]
>> >
>> > 2010-09-18 19:05:18.973060 [ERR] mod_skypopen.c:1304 rev
>> > git2svn-syncpoint-master-203-g3eb35a5[(nil)|37 ][ERRORA 1304
>> > ][none ][-1,-1,-1] open of skypopen.conf failed
>> > 2010-09-18 19:05:18.973060 [CRIT] switch_loadable_module.c:926 Error
>> Loading
>> > module /usr/local/freeswitch/mod/mod_skypopen.so
>> > **Module load routine returned an error**
>> > freeswitch at localhost.localdomain>
>> >
>> >
>> >
>> >
>> >
>> > On Sat, Sep 18, 2010 at 2:55 PM, Giovanni Maruzzelli
>> > <gmaruzz at celliax.org>wrote:
>> >
>> >> You reported:
>> >>
>> >> >checking for directory with kernel source... ./configure: line 4870:
>> cd:
>> >> /lib/modules/2.6.18->164.el5/source: No such file or directory
>> >> >/lib/modules/2.6.18-164.el5/source
>> >> >checking for directory with kernel build...
>> >> /lib/modules/2.6.18-164.el5/build
>> >> >checking for kernel linux/version.h... no
>> >> >The file /include/linux/version.h does not exist.
>> >> >Please install the package with full kernel sources for your
>> distribution
>> >> >or use --with-kernel=dir option to specify another directory with
>> kernel
>> >> >sources (default is /lib/modules/2.6.18-164.el5/source).
>> >>
>> >> The error speaks very clear. You botched your install in some way...
>> >>
>> >> -giovanni
>> >>
>> >> On Sat, Sep 18, 2010 at 2:46 PM, Shamun toha md <shamun.toha at gmail.com>
>> >> wrote:
>> >> > This is not working for this, here kernel-devel and source is
>> >> > modified
>> >> > as
>> >> > wiki told:
>> >> >
>> >> > [root at localhost alsa-driver-1.0.20]# uname -a
>> >> > Linux localhost.localdomain 2.6.18-164.el5 #1 SMP Thu Sep 3 03:33:56
>> EDT
>> >> > 2009 i686 athlon i386 GNU/Linux
>> >> >
>> >> > [root at localhost alsa-driver-1.0.20]# yum info kernel-devel
>> >> > Loaded plugins: fastestmirror
>> >> > Loading mirror speeds from cached hostfile
>> >> > * addons: ftp.belnet.be
>> >> > * base: mirror.ovh.net
>> >> > * extras: mirror.ovh.net
>> >> > * updates: mirror.ovh.net
>> >> > Installed Packages
>> >> > Name : kernel-devel
>> >> > Arch : i686
>> >> > Version : 2.6.18
>> >> > Release : 194.11.3.el5
>> >> > Size : 16 M
>> >> > Repo : installed
>> >> > Summary : Development package for building kernel modules to match
>> >> > the
>> >> > kernel.
>> >> > URL : http://www.kernel.org/
>> >> > License : GPLv2
>> >> > Description: This package provides kernel headers and makefiles
>> >> sufficient
>> >> > to build modules
>> >> > : against the kernel package.
>> >> > [root at localhost alsa-driver-1.0.20]# ./configure
>> >> > --with-cards=dummy,usb-audio,hda-intel,hrtimer,rtctimer
>> >> > --with-card-options=all
>> >> > checking for gcc... gcc
>> >> > checking for C compiler default output file name... a.out
>> >> > checking whether the C compiler works... yes
>> >> > checking whether we are cross compiling... no
>> >> > checking for suffix of executables...
>> >> > checking for suffix of object files... o
>> >> > checking whether we are using the GNU C compiler... yes
>> >> > checking whether gcc accepts -g... yes
>> >> > checking for gcc option to accept ISO C89... none needed
>> >> > checking for ranlib... ranlib
>> >> > checking for a BSD-compatible install... /usr/bin/install -c
>> >> > checking how to run the C preprocessor... gcc -E
>> >> > checking for grep that handles long lines and -e... /bin/grep
>> >> > checking for egrep... /bin/grep -E
>> >> > checking for ANSI C header files... yes
>> >> > checking for an ANSI C-conforming const... yes
>> >> > checking for inline... inline
>> >> > checking whether time.h and sys/time.h may both be included... yes
>> >> > checking whether gcc needs -traditional... no
>> >> > checking for current directory... /usr/local/src/alsa-driver-1.0.20
>> >> > checking cross compile...
>> >> > checking for directory with kernel source... ./configure: line 4870:
>> cd:
>> >> > /lib/modules/2.6.18-164.el5/source: No such file or directory
>> >> > /lib/modules/2.6.18-164.el5/source
>> >> > checking for directory with kernel build...
>> >> > /lib/modules/2.6.18-164.el5/build
>> >> > checking for kernel linux/version.h... no
>> >> > The file /include/linux/version.h does not exist.
>> >> > Please install the package with full kernel sources for your
>> >> > distribution
>> >> > or use --with-kernel=dir option to specify another directory with
>> kernel
>> >> > sources (default is /lib/modules/2.6.18-164.el5/source).
>> >> > [root at localhost alsa-driver-1.0.20]#
>> >> >
>> >> >
>> >> >
>> >> >
>> >> >
>> >> >
>> >> >
>> >> >
>> >> > Wiki told:
>> >> > ==========
>> >> >
>> >> > Let's start with ALSA driver compilation and installation:
>> >> >
>> >> > Get it from:
>> >> > ftp://ftp.alsa-project.org/pub/driver/alsa-driver-1.0.20.tar.bz2
>> >> >
>> >> > CentOS, RedHat
>> >> >
>> >> > Because CentOS backports features in kernel, you will have to edit
>> >> > alsa-driver-1.0.20/include/adriver.h and comment out line 101 and
>> >> > line
>> >> 1781,
>> >> > to make it like this:
>> >> >
>> >> > /* other missing types */
>> >> > #if LINUX_VERSION_CODE < KERNEL_VERSION(2, 6, 28)
>> >> > //typedef unsigned int fmode_t;
>> >> > #endif
>> >> >
>> >> > ...
>> >> >
>> >> > #ifndef bool /* just to be sure */
>> >> > //typedef _Bool bool;
>> >> > #endif
>> >> >
>> >> > Then edit alsa-driver-1.0.20/usb/usbcompat.h adding a "#if 0" on line
>> >> > 18,
>> >> > commenting out the following code making it look like this:
>> >> >
>> >> > #endif /* < 2.6.24 */
>> >> > #if 0
>> >> > #if LINUX_VERSION_CODE < KERNEL_VERSION(2, 6, 19)
>> >> > static inline int usb_endpoint_dir_in(const struct
>> >> usb_endpoint_descriptor
>> >> > *epd)
>> >> >
>> >> > close the commenting out block adding an "#endif" at line 97, making
>> it
>> >> look
>> >> > like this:
>> >> >
>> >> > #endif /* < 2.6.21 */
>> >> > #endif //0
>> >> >
>> >> > Then:
>> >> >
>> >> > yum install kernel-devel # or yum install kernel-xen-devel (if on
>> xen)
>> >> >
>> >> > ./configure --with-redhat=yes \
>> >> > --with-cards=dummy,usb-audio,hda-intel,hrtimer,rtctimer \
>> >> > --with-card-options=all
>> >> >
>> >> >
>> >> >
>> >> > make && make install
>> >> >
>> >> > After the first make && make install, copy
>> >> mod_skypopen/configs/alsa/dummy.c
>> >> > to alsa-driver-1.0.20/sound/drivers/dummy.c .
>> >> >
>> >> > make && make install #again :)
>> >> >
>> >> >
>> >> >
>> >> > On Sat, Sep 18, 2010 at 1:49 PM, Giovanni Maruzzelli <
>> >> gmaruzz at celliax.org>
>> >> > wrote:
>> >> >>
>> >> >> Read what error you get.
>> >> >> Follow the wiki page.
>> >> >> Install necessary packages and edit alsa sources. All described in
>> wiki
>> >> >> page.
>> >> >> -giovanni
>> >> >>
>> >> >> On 9/18/10, Shamun toha md <shamun.toha at gmail.com> wrote:
>> >> >> > Alsa driver installation in CentOS 5.4 getting fail:
>> >> >> >
>> >> >> > [root at localhost alsa-driver-1.0.20]# ./configure --with-redhat=yes
>> >> >> > --with-cards=dummy,usb-audio,hda-intel,hrtimer,rtctimer
>> >> >> > --with-card-options=all
>> >> >> > checking for gcc... gcc
>> >> >> > checking for C compiler default output file name... a.out
>> >> >> > checking whether the C compiler works... yes
>> >> >> > checking whether we are cross compiling... no
>> >> >> > checking for suffix of executables...
>> >> >> > checking for suffix of object files... o
>> >> >> > checking whether we are using the GNU C compiler... yes
>> >> >> > checking whether gcc accepts -g... yes
>> >> >> > checking for gcc option to accept ISO C89... none needed
>> >> >> > checking for ranlib... ranlib
>> >> >> > checking for a BSD-compatible install... /usr/bin/install -c
>> >> >> > checking how to run the C preprocessor... gcc -E
>> >> >> > checking for grep that handles long lines and -e... /bin/grep
>> >> >> > checking for egrep... /bin/grep -E
>> >> >> > checking for ANSI C header files... yes
>> >> >> > checking for an ANSI C-conforming const... yes
>> >> >> > checking for inline... inline
>> >> >> > checking whether time.h and sys/time.h may both be included... yes
>> >> >> > checking whether gcc needs -traditional... no
>> >> >> > checking for current directory...
>> >> >> > /usr/local/src/alsa-driver-1.0.20
>> >> >> > checking cross compile...
>> >> >> > checking for directory with kernel source... ./configure: line
>> 4870:
>> >> cd:
>> >> >> > /lib/modules/2.6.18-164.el5/source: No such file or directory
>> >> >> > /lib/modules/2.6.18-164.el5/source
>> >> >> > checking for directory with kernel build...
>> >> >> > /lib/modules/2.6.18-164.el5/build
>> >> >> > checking for kernel linux/version.h... no
>> >> >> > The file /include/linux/version.h does not exist.
>> >> >> > Please install the package with full kernel sources for your
>> >> >> > distribution
>> >> >> > or use --with-kernel=dir option to specify another directory with
>> >> kernel
>> >> >> > sources (default is /lib/modules/2.6.18-164.el5/source).
>> >> >> > [root at localhost alsa-driver-1.0.20]#
>> >> >> >
>> >> >> >
>> >> >> >
>> >> >> > [root at localhost alsa-driver-1.0.20]# ./configure --with-redhat=yes
>> >> >> > --with-cards=dummy,usb-audio,hda-intel,hrtimer,rtctimer
>> >> >> > --with-card-options=all
>> >> --with-kernel=/lib/modules/2.6.18-164.el5/source
>> >> >> > checking for gcc... gcc
>> >> >> > checking for C compiler default output file name... a.out
>> >> >> > checking whether the C compiler works... yes
>> >> >> > checking whether we are cross compiling... no
>> >> >> > checking for suffix of executables...
>> >> >> > checking for suffix of object files... o
>> >> >> > checking whether we are using the GNU C compiler... yes
>> >> >> > checking whether gcc accepts -g... yes
>> >> >> > checking for gcc option to accept ISO C89... none needed
>> >> >> > checking for ranlib... ranlib
>> >> >> > checking for a BSD-compatible install... /usr/bin/install -c
>> >> >> > checking how to run the C preprocessor... gcc -E
>> >> >> > checking for grep that handles long lines and -e... /bin/grep
>> >> >> > checking for egrep... /bin/grep -E
>> >> >> > checking for ANSI C header files... yes
>> >> >> > checking for an ANSI C-conforming const... yes
>> >> >> > checking for inline... inline
>> >> >> > checking whether time.h and sys/time.h may both be included... yes
>> >> >> > checking whether gcc needs -traditional... no
>> >> >> > checking for current directory...
>> >> >> > /usr/local/src/alsa-driver-1.0.20
>> >> >> > checking cross compile...
>> >> >> > checking for directory with kernel source... ./configure: line
>> 4870:
>> >> cd:
>> >> >> > /lib/modules/2.6.18-164.el5/source: No such file or directory
>> >> >> > /lib/modules/2.6.18-164.el5/source
>> >> >> > checking for directory with kernel build...
>> >> >> > checking for kernel linux/version.h... no
>> >> >> > The file /include/linux/version.h does not exist.
>> >> >> > Please install the package with full kernel sources for your
>> >> >> > distribution
>> >> >> > or use --with-kernel=dir option to specify another directory with
>> >> kernel
>> >> >> > sources (default is /lib/modules/2.6.18-164.el5/source).
>> >> >> >
>> >> >>
>> >> >> --
>> >> >> Sent from my mobile device
>> >> >>
>> >> >> Sincerely,
>> >> >>
>> >> >> Giovanni Maruzzelli
>> >> >> Cell : +39-347-2665618
>> >> >>
>> >> >> _______________________________________________
>> >> >> FreeSWITCH-users mailing list
>> >> >> FreeSWITCH-users at lists.freeswitch.org
>> >> >> http://lists.freeswitch.org/mailman/listinfo/freeswitch-users
>> >> >> UNSUBSCRIBE:
>> >> http://lists.freeswitch.org/mailman/options/freeswitch-users
>> >> >> http://www.freeswitch.org
>> >> >
>> >> >
>> >> > _______________________________________________
>> >> > FreeSWITCH-users mailing list
>> >> > FreeSWITCH-users at lists.freeswitch.org
>> >> > http://lists.freeswitch.org/mailman/listinfo/freeswitch-users
>> >> > UNSUBSCRIBE:
>> http://lists.freeswitch.org/mailman/options/freeswitch-users
>> >> > http://www.freeswitch.org
>> >> >
>> >> >
>> >>
>> >>
>> >>
>> >> --
>> >> Sincerely,
>> >>
>> >> Giovanni Maruzzelli
>> >> Cell : +39-347-2665618
>> >>
>> >> _______________________________________________
>> >> FreeSWITCH-users mailing list
>> >> FreeSWITCH-users at lists.freeswitch.org
>> >> http://lists.freeswitch.org/mailman/listinfo/freeswitch-users
>> >> UNSUBSCRIBE:
>> http://lists.freeswitch.org/mailman/options/freeswitch-users
>> >> http://www.freeswitch.org
>> >>
>> >
>>
>> --
>> Sent from my mobile device
>>
>> Sincerely,
>>
>> Giovanni Maruzzelli
>> Cell : +39-347-2665618
>>
>> _______________________________________________
>> FreeSWITCH-users mailing list
>> FreeSWITCH-users at lists.freeswitch.org
>> http://lists.freeswitch.org/mailman/listinfo/freeswitch-users
>> UNSUBSCRIBE:http://lists.freeswitch.org/mailman/options/freeswitch-users
>> http://www.freeswitch.org
>>
>
--
Sent from my mobile device
Sincerely,
Giovanni Maruzzelli
Cell : +39-347-2665618
More information about the FreeSWITCH-users
mailing list