[Freeswitch-users] Freeswitch - mod_skypopen fail

Shamun toha md shamun.toha at gmail.com
Sun Sep 19 03:30:34 PDT 2010 

Now i arrange to start it atleast, but gets failed, how do you fix this?

freeswitch at localhost.localdomain> load mod_skypopen
2010-09-19 13:14:53.038402 [WARNING] mod_skypopen.c:1542 rev
git2svn-syncpoint-master-203-g3eb35a5[(nil)|37     ][WARNINGA  1542
][interface1][-1, 0, 0] STARTING interface_id=1
2010-09-19 13:14:53.242399 [NOTICE] mod_skypopen.c:1567 rev
git2svn-syncpoint-master-203-g3eb35a5[(nil)|37     ][NOTICA  1567
][interface1][-1, 0, 0] WAITING roughly 10 seconds to find a running Skype
client and connect to its SKYPE API for interface_id=1
2010-09-19 13:14:53.242399 [NOTICE] mod_skypopen.c:1576 rev
git2svn-syncpoint-master-203-g3eb35a5[(nil)|37     ][NOTICA  1576
][interface1][-1, 0, 0] Found a running Skype client, connected to its SKYPE
API for interface_id=1, waiting 60 seconds for CURRENTUSERHANDLE==notwork1

2010-09-19 13:15:54.868242 [ERR] mod_skypopen.c:1620 rev
git2svn-syncpoint-master-203-g3eb35a5[(nil)|37     ][ERRORA  1620
][interface1][-1, 0, 0] The Skype client to which we are connected FAILED to
gave us CURRENTUSERHANDLE=notwork1, interface_id=1 FAILED to start. No Skype
client logged in as 'notwork1' has been found. Please (re)launch a Skype
client logged in as 'notwork1'. Skypopen exiting now

-ERR [module load file routine returned an error]

2010-09-19 13:15:54.868242 [CRIT] switch_loadable_module.c:926 Error Loading
module /usr/local/freeswitch/mod/mod_skypopen.so
**Module load routine returned an error**
freeswitch at localhost.localdomain> 2010-09-19 13:15:54.965251 [NOTICE]
skypopen_protocol.c:1754 rev
git2svn-syncpoint-master-203-g3eb35a5[(nil)|37     ][NOTICA  1754
][interface1][-1, 0, 0] EXITING





On Sat, Sep 18, 2010 at 7:51 PM, Giovanni Maruzzelli <gmaruzz at gmail.com>wrote:

> What is your problem Shamun?
>
> You don't know how to read?
>
> In what you report is written:
>
> "open of skypopen.conf failed"
>
>
>
> On 9/18/10, Shamun toha md <shamun.toha at gmail.com> wrote:
> > You are correct, even without alsa driver, if i simply start skype GUI
> > instance from ssh -X servermachine, i can see skype get started without
> > getting fail or crash. But if i "load mod_skypeopen", why it is getting
> > again error like this?
> >
> > *freeswitch at localhost.localdomain> *
> > 2010-09-18 19:05:08.243932 [CONSOLE] switch_core.c:1649
> > FreeSWITCH Version 1.0.head (*git-3eb35a5 2010-09-15 17-04-54 -0500*)
> > Started.
> > Max Sessions[1000]
> > Session Rate[30]
> > SQL [Enabled]
> >
> > *freeswitch at localhost.localdomain> load mod_skypopen*
> >
> > -ERR [module load file routine returned an error]
> >
> > 2010-09-18 19:05:18.973060 [ERR] mod_skypopen.c:1304 rev
> > git2svn-syncpoint-master-203-g3eb35a5[(nil)|37     ][ERRORA  1304
> > ][none      ][-1,-1,-1] open of skypopen.conf failed
> > 2010-09-18 19:05:18.973060 [CRIT] switch_loadable_module.c:926 Error
> Loading
> > module /usr/local/freeswitch/mod/mod_skypopen.so
> > **Module load routine returned an error**
> > freeswitch at localhost.localdomain>
> >
> >
> >
> >
> >
> > On Sat, Sep 18, 2010 at 2:55 PM, Giovanni Maruzzelli
> > <gmaruzz at celliax.org>wrote:
> >
> >> You reported:
> >>
> >> >checking for directory with kernel source... ./configure: line 4870:
> cd:
> >> /lib/modules/2.6.18->164.el5/source: No such file or directory
> >> >/lib/modules/2.6.18-164.el5/source
> >> >checking for directory with kernel build...
> >> /lib/modules/2.6.18-164.el5/build
> >> >checking for kernel linux/version.h... no
> >> >The file /include/linux/version.h does not exist.
> >> >Please install the package with full kernel sources for your
> distribution
> >> >or use --with-kernel=dir option to specify another directory with
> kernel
> >> >sources (default is /lib/modules/2.6.18-164.el5/source).
> >>
> >> The error speaks very clear. You botched your install in some way...
> >>
> >> -giovanni
> >>
> >> On Sat, Sep 18, 2010 at 2:46 PM, Shamun toha md <shamun.toha at gmail.com>
> >> wrote:
> >> > This is not working for this, here kernel-devel and source is modified
> >> > as
> >> > wiki told:
> >> >
> >> > [root at localhost alsa-driver-1.0.20]# uname -a
> >> > Linux localhost.localdomain 2.6.18-164.el5 #1 SMP Thu Sep 3 03:33:56
> EDT
> >> > 2009 i686 athlon i386 GNU/Linux
> >> >
> >> > [root at localhost alsa-driver-1.0.20]# yum info kernel-devel
> >> > Loaded plugins: fastestmirror
> >> > Loading mirror speeds from cached hostfile
> >> >  * addons: ftp.belnet.be
> >> >  * base: mirror.ovh.net
> >> >  * extras: mirror.ovh.net
> >> >  * updates: mirror.ovh.net
> >> > Installed Packages
> >> > Name       : kernel-devel
> >> > Arch       : i686
> >> > Version    : 2.6.18
> >> > Release    : 194.11.3.el5
> >> > Size       : 16 M
> >> > Repo       : installed
> >> > Summary    : Development package for building kernel modules to match
> >> > the
> >> > kernel.
> >> > URL        : http://www.kernel.org/
> >> > License    : GPLv2
> >> > Description: This package provides kernel headers and makefiles
> >> sufficient
> >> > to build modules
> >> >            : against the kernel package.
> >> > [root at localhost alsa-driver-1.0.20]# ./configure
> >> > --with-cards=dummy,usb-audio,hda-intel,hrtimer,rtctimer
> >> > --with-card-options=all
> >> > checking for gcc... gcc
> >> > checking for C compiler default output file name... a.out
> >> > checking whether the C compiler works... yes
> >> > checking whether we are cross compiling... no
> >> > checking for suffix of executables...
> >> > checking for suffix of object files... o
> >> > checking whether we are using the GNU C compiler... yes
> >> > checking whether gcc accepts -g... yes
> >> > checking for gcc option to accept ISO C89... none needed
> >> > checking for ranlib... ranlib
> >> > checking for a BSD-compatible install... /usr/bin/install -c
> >> > checking how to run the C preprocessor... gcc -E
> >> > checking for grep that handles long lines and -e... /bin/grep
> >> > checking for egrep... /bin/grep -E
> >> > checking for ANSI C header files... yes
> >> > checking for an ANSI C-conforming const... yes
> >> > checking for inline... inline
> >> > checking whether time.h and sys/time.h may both be included... yes
> >> > checking whether gcc needs -traditional... no
> >> > checking for current directory... /usr/local/src/alsa-driver-1.0.20
> >> > checking cross compile...
> >> > checking for directory with kernel source... ./configure: line 4870:
> cd:
> >> > /lib/modules/2.6.18-164.el5/source: No such file or directory
> >> > /lib/modules/2.6.18-164.el5/source
> >> > checking for directory with kernel build...
> >> > /lib/modules/2.6.18-164.el5/build
> >> > checking for kernel linux/version.h... no
> >> > The file /include/linux/version.h does not exist.
> >> > Please install the package with full kernel sources for your
> >> > distribution
> >> > or use --with-kernel=dir option to specify another directory with
> kernel
> >> > sources (default is /lib/modules/2.6.18-164.el5/source).
> >> > [root at localhost alsa-driver-1.0.20]#
> >> >
> >> >
> >> >
> >> >
> >> >
> >> >
> >> >
> >> >
> >> > Wiki told:
> >> > ==========
> >> >
> >> > Let's start with ALSA driver compilation and installation:
> >> >
> >> > Get it from:
> >> > ftp://ftp.alsa-project.org/pub/driver/alsa-driver-1.0.20.tar.bz2
> >> >
> >> > CentOS, RedHat
> >> >
> >> > Because CentOS backports features in kernel, you will have to edit
> >> > alsa-driver-1.0.20/include/adriver.h and comment out line 101 and line
> >> 1781,
> >> > to make it like this:
> >> >
> >> > /* other missing types */
> >> > #if LINUX_VERSION_CODE < KERNEL_VERSION(2, 6, 28)
> >> > //typedef unsigned int fmode_t;
> >> > #endif
> >> >
> >> > ...
> >> >
> >> > #ifndef bool    /* just to be sure */
> >> > //typedef _Bool bool;
> >> > #endif
> >> >
> >> > Then edit alsa-driver-1.0.20/usb/usbcompat.h adding a "#if 0" on line
> >> > 18,
> >> > commenting out the following code making it look like this:
> >> >
> >> > #endif /* < 2.6.24 */
> >> > #if 0
> >> > #if LINUX_VERSION_CODE < KERNEL_VERSION(2, 6, 19)
> >> > static inline int usb_endpoint_dir_in(const struct
> >> usb_endpoint_descriptor
> >> > *epd)
> >> >
> >> > close the commenting out block adding an "#endif" at line 97, making
> it
> >> look
> >> > like this:
> >> >
> >> > #endif /* < 2.6.21 */
> >> > #endif //0
> >> >
> >> > Then:
> >> >
> >> >  yum install kernel-devel # or  yum install kernel-xen-devel (if on
> xen)
> >> >
> >> >  ./configure --with-redhat=yes \
> >> >  --with-cards=dummy,usb-audio,hda-intel,hrtimer,rtctimer \
> >> >  --with-card-options=all
> >> >
> >> >
> >> >
> >> >  make && make install
> >> >
> >> > After the first make && make install, copy
> >> mod_skypopen/configs/alsa/dummy.c
> >> > to alsa-driver-1.0.20/sound/drivers/dummy.c .
> >> >
> >> > make && make install #again :)
> >> >
> >> >
> >> >
> >> > On Sat, Sep 18, 2010 at 1:49 PM, Giovanni Maruzzelli <
> >> gmaruzz at celliax.org>
> >> > wrote:
> >> >>
> >> >> Read what error you get.
> >> >> Follow the wiki page.
> >> >> Install necessary packages and edit alsa sources. All described in
> wiki
> >> >> page.
> >> >> -giovanni
> >> >>
> >> >> On 9/18/10, Shamun toha md <shamun.toha at gmail.com> wrote:
> >> >> > Alsa driver installation in CentOS 5.4 getting fail:
> >> >> >
> >> >> > [root at localhost alsa-driver-1.0.20]# ./configure --with-redhat=yes
> >> >> > --with-cards=dummy,usb-audio,hda-intel,hrtimer,rtctimer
> >> >> > --with-card-options=all
> >> >> > checking for gcc... gcc
> >> >> > checking for C compiler default output file name... a.out
> >> >> > checking whether the C compiler works... yes
> >> >> > checking whether we are cross compiling... no
> >> >> > checking for suffix of executables...
> >> >> > checking for suffix of object files... o
> >> >> > checking whether we are using the GNU C compiler... yes
> >> >> > checking whether gcc accepts -g... yes
> >> >> > checking for gcc option to accept ISO C89... none needed
> >> >> > checking for ranlib... ranlib
> >> >> > checking for a BSD-compatible install... /usr/bin/install -c
> >> >> > checking how to run the C preprocessor... gcc -E
> >> >> > checking for grep that handles long lines and -e... /bin/grep
> >> >> > checking for egrep... /bin/grep -E
> >> >> > checking for ANSI C header files... yes
> >> >> > checking for an ANSI C-conforming const... yes
> >> >> > checking for inline... inline
> >> >> > checking whether time.h and sys/time.h may both be included... yes
> >> >> > checking whether gcc needs -traditional... no
> >> >> > checking for current directory... /usr/local/src/alsa-driver-1.0.20
> >> >> > checking cross compile...
> >> >> > checking for directory with kernel source... ./configure: line
> 4870:
> >> cd:
> >> >> > /lib/modules/2.6.18-164.el5/source: No such file or directory
> >> >> > /lib/modules/2.6.18-164.el5/source
> >> >> > checking for directory with kernel build...
> >> >> > /lib/modules/2.6.18-164.el5/build
> >> >> > checking for kernel linux/version.h... no
> >> >> > The file /include/linux/version.h does not exist.
> >> >> > Please install the package with full kernel sources for your
> >> >> > distribution
> >> >> > or use --with-kernel=dir option to specify another directory with
> >> kernel
> >> >> > sources (default is /lib/modules/2.6.18-164.el5/source).
> >> >> > [root at localhost alsa-driver-1.0.20]#
> >> >> >
> >> >> >
> >> >> >
> >> >> > [root at localhost alsa-driver-1.0.20]# ./configure --with-redhat=yes
> >> >> > --with-cards=dummy,usb-audio,hda-intel,hrtimer,rtctimer
> >> >> > --with-card-options=all
> >> --with-kernel=/lib/modules/2.6.18-164.el5/source
> >> >> > checking for gcc... gcc
> >> >> > checking for C compiler default output file name... a.out
> >> >> > checking whether the C compiler works... yes
> >> >> > checking whether we are cross compiling... no
> >> >> > checking for suffix of executables...
> >> >> > checking for suffix of object files... o
> >> >> > checking whether we are using the GNU C compiler... yes
> >> >> > checking whether gcc accepts -g... yes
> >> >> > checking for gcc option to accept ISO C89... none needed
> >> >> > checking for ranlib... ranlib
> >> >> > checking for a BSD-compatible install... /usr/bin/install -c
> >> >> > checking how to run the C preprocessor... gcc -E
> >> >> > checking for grep that handles long lines and -e... /bin/grep
> >> >> > checking for egrep... /bin/grep -E
> >> >> > checking for ANSI C header files... yes
> >> >> > checking for an ANSI C-conforming const... yes
> >> >> > checking for inline... inline
> >> >> > checking whether time.h and sys/time.h may both be included... yes
> >> >> > checking whether gcc needs -traditional... no
> >> >> > checking for current directory... /usr/local/src/alsa-driver-1.0.20
> >> >> > checking cross compile...
> >> >> > checking for directory with kernel source... ./configure: line
> 4870:
> >> cd:
> >> >> > /lib/modules/2.6.18-164.el5/source: No such file or directory
> >> >> > /lib/modules/2.6.18-164.el5/source
> >> >> > checking for directory with kernel build...
> >> >> > checking for kernel linux/version.h... no
> >> >> > The file /include/linux/version.h does not exist.
> >> >> > Please install the package with full kernel sources for your
> >> >> > distribution
> >> >> > or use --with-kernel=dir option to specify another directory with
> >> kernel
> >> >> > sources (default is /lib/modules/2.6.18-164.el5/source).
> >> >> >
> >> >>
> >> >> --
> >> >> Sent from my mobile device
> >> >>
> >> >> Sincerely,
> >> >>
> >> >> Giovanni Maruzzelli
> >> >> Cell : +39-347-2665618
> >> >>
> >> >> _______________________________________________
> >> >> FreeSWITCH-users mailing list
> >> >> FreeSWITCH-users at lists.freeswitch.org
> >> >> http://lists.freeswitch.org/mailman/listinfo/freeswitch-users
> >> >> UNSUBSCRIBE:
> >> http://lists.freeswitch.org/mailman/options/freeswitch-users
> >> >> http://www.freeswitch.org
> >> >
> >> >
> >> > _______________________________________________
> >> > FreeSWITCH-users mailing list
> >> > FreeSWITCH-users at lists.freeswitch.org
> >> > http://lists.freeswitch.org/mailman/listinfo/freeswitch-users
> >> > UNSUBSCRIBE:
> http://lists.freeswitch.org/mailman/options/freeswitch-users
> >> > http://www.freeswitch.org
> >> >
> >> >
> >>
> >>
> >>
> >> --
> >> Sincerely,
> >>
> >> Giovanni Maruzzelli
> >> Cell : +39-347-2665618
> >>
> >> _______________________________________________
> >> FreeSWITCH-users mailing list
> >> FreeSWITCH-users at lists.freeswitch.org
> >> http://lists.freeswitch.org/mailman/listinfo/freeswitch-users
> >> UNSUBSCRIBE:
> http://lists.freeswitch.org/mailman/options/freeswitch-users
> >> http://www.freeswitch.org
> >>
> >
>
> --
> Sent from my mobile device
>
> Sincerely,
>
> Giovanni Maruzzelli
> Cell : +39-347-2665618
>
> _______________________________________________
> FreeSWITCH-users mailing list
> FreeSWITCH-users at lists.freeswitch.org
> http://lists.freeswitch.org/mailman/listinfo/freeswitch-users
> UNSUBSCRIBE:http://lists.freeswitch.org/mailman/options/freeswitch-users
> http://www.freeswitch.org
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: http://lists.freeswitch.org/pipermail/freeswitch-users/attachments/20100919/ceb761bd/attachment-0001.html

More information about the FreeSWITCH-users mailing list