[Freeswitch-users] short ringback tone when answer

[Peter Olsson]

The equipment connected in the other en of the T1 is probably playing these tones for you, 500ms is probably the time it takes for the called to be connected successfully.

/Peter
________________________________________
Från: freeswitch-users-bounces at lists.freeswitch.org [freeswitch-users-bounces at lists.freeswitch.org] för Tony Tin [tony.tin at noahmedia.com.hk]
Skickat: den 9 maj 2010 15:16
Till: freeswitch-users at lists.freeswitch.org
Ämne: [Freeswitch-users] short ringback tone when answer

Hi All,

I've just setup a new IVRS with FreeSwitch and a Digium TE220 card (which is connected to a 4ess T1). Every thing works fine so far except one little problem that annoys me. Every time I dial in the ivrs, there is a very short (0.5 second) ringback tone exactly while the "<action application="answer"/>" line is executed in the dial plan. I want to disable this ringback tone because the ivrs will answer the call immediately, the ringback tone is really unnecessary in this case, but I fail to do that. I try to set the variable "ringback" to change the ringback tone, it's also not working. Could anyone please help.

I'm using the native pri stack.
The default.xml containts only below lines, and attached is the log file.

       <extension name="testing">
          <condition field="destination_number" expression="^(6.*)$">
                <action application="sleep" data="3000"/>
                <action application="answer"/>
                <action application="sleep" data="3000"/>
          </condition>
       </extension>

Regards,
Tony

!DSPAM:4be6f37432931620317181!