[Freeswitch-users] openzap no audio?

[Ognjen Seslija]

I had the same issues with Dahdi. When I was using latest Zaptel, PRI-PRI
calls had audio.

Ognjen

On Thu, Mar 18, 2010 at 6:07 AM, Tom Christensen <pavera at gmail.com> wrote:

> I've got freeswitch installed with a digium te110p hooked up to a PRI.
>
> calls through the system work fine SIP->SIP, calling and receiving calls
> over the PRI works, (IE the signalling part, a call can be made and incoming
> calls come in over the PRI and I can route them based on DID), however,
> there is no audio to either party.  I've checked, and there is an RTP stream
> running while the call is up, there is no reason it would be blocked (IE,
> SIP->SIP calls use the same RTP port range, and they work fine).  I saw a
> few posts that talked about no audio for a few seconds after a call is
> connected, or that calls would connect and then drop after a few seconds.
>  This is different, I can leave the call up for many minutes, it doesn't
> drop, and audio never starts coming through.
>
> I'm running openzap natively, no libpri.  I am using the dahdi 2.2.1, tried
> the latest release of zaptel first, freeswitch wouldn't even load with that.
>
> I'm going to try libpri now I think as I've exhausted all the other options
> I can think of.
>
> Any input/ideas would be greatly appreciated.
>
> -Tom
>
> _______________________________________________
> FreeSWITCH-users mailing list
> FreeSWITCH-users at lists.freeswitch.org
> http://lists.freeswitch.org/mailman/listinfo/freeswitch-users
> UNSUBSCRIBE:http://lists.freeswitch.org/mailman/options/freeswitch-users
> http://www.freeswitch.org
>
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: http://lists.freeswitch.org/pipermail/freeswitch-users/attachments/20100321/d6bc2b5f/attachment-0002.html