[Freeswitch-users] Dialplan handling on call fails

[Roger Salloum]

>From my understanding the break is used to handle what happens on the evaluation of the condition. I have break=never as I want it to try all rules for the extension even if the one above returns true or false.

----- Original Message -----
From: David Ponzone <david.ponzone at gmail.com>
Date: Monday, June 28, 2010 6:36 am
Subject: Re: [Freeswitch-users] Dialplan handling on call fails
To: freeswitch-users at lists.freeswitch.org

> If you use continue_on_fail, I don't think you need to set  
> break="never".
> 
> David Ponzone  Direction Technique
> email: david.ponzone at ipeva.fr
> tel:      01 74 03 18 97
> gsm:   06 66 98 76 34
> 
> Service Client IPeva
> tel:      0811 46 26 26
> www.ipeva.fr  -   www.ipeva-studio.com
> 
> Ce message et toutes les pièces jointes sont confidentiels et 
> établis  
> à l'intention exclusive de ses destinataires. Toute utilisation 
> ou  
> diffusion non autorisée est interdite. Tout message électronique 
> est  
> susceptible d'altération. IPeva décline toute responsabilité 
> au  
> titre de ce message s'il a été altéré, déformé ou falsifié. 
> Si  
> vous n'êtes pas destinataire de ce message, merci de le 
> détruire  
> immédiatement et d'avertir l'expéditeur.
> 
> 
> 
> 
> Le 26/06/2010 à 16:53, Roger Salloum a écrit :
> 
> > Hi,
> >
> > I'm trying to setup a dialplan such that if one particular 
> route  
> > fails it will try another.  However, I do not want it to 
> try another  
> > route once it had recieved a 180/183 in response from a 
> gateway. I  
> > have not been able to determine how to accomplish this.
> >
> > For Example:
> >
> >   <condition field="destination_number" 
> expression="^(1000123.*)$"  
> > break="never">
> >       <action 
> application="set" data="hangup_after_bridge=true"/>
> > 	<action application="set"  
> > data="continue_on_fail=RECOVER_ON_TIMER_EXPIRE"/>
> >       <action 
> application="bridge" data="sofia/gateway/carrier1/$1"/>
> >   </condition>
> >
> >   <condition field="destination_number" 
> expression="^(1000.*)$"  
> > break="never">
> >       <action 
> application="set"  
> > data="hangup_after_bridge=RECOVER_ON_TIMER_EXPIRE"/>
> >       <action 
> application="bridge" data="sofia/gateway/carrier2/$1"/>
> >   </condition>
> >
> >   <condition field="destination_number" 
> expression="^(1.*)$"  
> > break="never">
> >       <action 
> application="set" data="hangup_after_bridge=true"/>
> > <action application="set"  
> > data="continue_on_fail=RECOVER_ON_TIMER_EXPIRE"/>
> >     <action application="bridge" 
> data="sofia/gateway/carrier3/$1"/>>   </condition>
> >
> > So when 10001234567 is dialled i will match all 3. I'd like to 
> be  
> > able to try 1, if failed, try 2, if failed try 3. All calls go 
> out  
> > via an outbound proxy.
> >
> > Using the above examples if the gateway does not respond in 
> time,  
> > the proxy generates a 408 REQUEST TIMEOUT error message. It 
> will  
> > then fail out and try the next route. However, when the 
> gateway  
> > responds with a 180/183 but there is no answer after 2 minutes 
> the  
> > proxy, will generate a 480 NO ANSWER (also tried a 408 
> REQUEST  
> > TIMEOUT ). When Freeswitch receives this message it fails, and 
> then  
> > attempts the third failure route. How do i prevent the 
> dialplan from  
> > continuing once it has received a 180/183 when no one answers 
> the  
> > phone?
> >
> > Thanks,
> >
> > _______________________________________________
> > FreeSWITCH-users mailing list
> > FreeSWITCH-users at lists.freeswitch.org
> > http://lists.freeswitch.org/mailman/listinfo/freeswitch-users
> > 
> UNSUBSCRIBE:http://lists.freeswitch.org/mailman/options/freeswitch-users
> > http://www.freeswitch.org
> 
> 
-------------- next part --------------
An HTML attachment was scrubbed...
URL: http://lists.freeswitch.org/pipermail/freeswitch-users/attachments/20100628/df924365/attachment-0001.html