[Freeswitch-users] Dialplan handling on call fails

[David Ponzone]

If you use continue_on_fail, I don't think you need to set  
break="never".

David Ponzone  Direction Technique
email: david.ponzone at ipeva.fr
tel:      01 74 03 18 97
gsm:   06 66 98 76 34

Service Client IPeva
tel:      0811 46 26 26
www.ipeva.fr  -   www.ipeva-studio.com

Ce message et toutes les pièces jointes sont confidentiels et établis  
à l'intention exclusive de ses destinataires. Toute utilisation ou  
diffusion non autorisée est interdite. Tout message électronique est  
susceptible d'altération. IPeva décline toute responsabilité au  
titre de ce message s'il a été altéré, déformé ou falsifié. Si  
vous n'êtes pas destinataire de ce message, merci de le détruire  
immédiatement et d'avertir l'expéditeur.




Le 26/06/2010 à 16:53, Roger Salloum a écrit :

> Hi,
>
> I'm trying to setup a dialplan such that if one particular route  
> fails it will try another.  However, I do not want it to try another  
> route once it had recieved a 180/183 in response from a gateway. I  
> have not been able to determine how to accomplish this.
>
> For Example:
>
>   <condition field="destination_number" expression="^(1000123.*)$"  
> break="never">
>       <action application="set" data="hangup_after_bridge=true"/>
> 	<action application="set"  
> data="continue_on_fail=RECOVER_ON_TIMER_EXPIRE"/>
>       <action application="bridge" data="sofia/gateway/carrier1/$1"/>
>   </condition>
>
>   <condition field="destination_number" expression="^(1000.*)$"  
> break="never">
>       <action application="set"  
> data="hangup_after_bridge=RECOVER_ON_TIMER_EXPIRE"/>
>       <action application="bridge" data="sofia/gateway/carrier2/$1"/>
>   </condition>
>
>   <condition field="destination_number" expression="^(1.*)$"  
> break="never">
>       <action application="set" data="hangup_after_bridge=true"/>
> <action application="set"  
> data="continue_on_fail=RECOVER_ON_TIMER_EXPIRE"/>
>     <action application="bridge" data="sofia/gateway/carrier3/$1"/>
>   </condition>
>
> So when 10001234567 is dialled i will match all 3. I'd like to be  
> able to try 1, if failed, try 2, if failed try 3. All calls go out  
> via an outbound proxy.
>
> Using the above examples if the gateway does not respond in time,  
> the proxy generates a 408 REQUEST TIMEOUT error message. It will  
> then fail out and try the next route. However, when the gateway  
> responds with a 180/183 but there is no answer after 2 minutes the  
> proxy, will generate a 480 NO ANSWER (also tried a 408 REQUEST  
> TIMEOUT ). When Freeswitch receives this message it fails, and then  
> attempts the third failure route. How do i prevent the dialplan from  
> continuing once it has received a 180/183 when no one answers the  
> phone?
>
> Thanks,
>
> _______________________________________________
> FreeSWITCH-users mailing list
> FreeSWITCH-users at lists.freeswitch.org
> http://lists.freeswitch.org/mailman/listinfo/freeswitch-users
> UNSUBSCRIBE:http://lists.freeswitch.org/mailman/options/freeswitch-users
> http://www.freeswitch.org

-------------- next part --------------
An HTML attachment was scrubbed...
URL: http://lists.freeswitch.org/pipermail/freeswitch-users/attachments/20100628/a18da2fc/attachment.html