[Freeswitch-users] Freeswitch Sangoma support for 32 E1 in one server

[Moises Silva]

Typo fixed, thanks!

Yes that is correct, you can put more than one transcoding board on one
system. We also have working in our labs a version of the transcoding module
which can use transcoding resources from other machines (so if you have a
transcoding board in another box in the same LAN you can use those
transcoding resources too). Hopefully we will have this module in FreeSWITCH
trunk soon!

Moises Silva
Senior Software Engineer
Sangoma Technologies Inc. | NEW 100 Renfrew Drive, Suite 100, Markham ON L3R
9R6 Canada
t. 1 905 474 1990 x128 | e. moy at sangoma.com



On Wed, Jul 28, 2010 at 12:45 PM, Nyamul Hassan <mnhassan at usa.net> wrote:

> Thank you for your answer Moises.  There is a minor error in the page that
> you linked in your email.  The first paragraph in
> http://wiki.sangoma.com/sangoma-media-transcoding#sng_freeswitch_usage mistakenly
> says "Asterisk" instead of "FreeSWITCH".
>
> So, if slots on the motherboard are available, we can have 4xA108 and
> 2xD100 on one system.  Correct?
>
> Regards
> HASSAN
>
>
>
> On Wed, Jul 28, 2010 at 21:53, Moises Silva <moises.silva at gmail.com>wrote:
>
>> Not sure about that. You'd have to test and hopefully let us know. You may
>> also purchase a Sangoma PCI transcoding card to offload all transcoding to
>> hardware, up to 480 transcoding sessions (2 legs per session) per card :-)
>>
>> http://wiki.sangoma.com/sangoma-media-transcoding
>>
>>
>> Moises Silva
>> Senior Software Engineer
>> Sangoma Technologies Inc. | NEW 100 Renfrew Drive, Suite 100, Markham ON
>> L3R 9R6 Canada
>> t. 1 905 474 1990 x128 | e. moy at sangoma.com
>>
>>
>>
>> On Wed, Jul 28, 2010 at 11:17 AM, Nyamul Hassan <mnhassan at usa.net> wrote:
>>
>>> Nice!
>>>
>>> Can a single quad core also do transcoding between G.729 and G.711?
>>>
>>> Regards
>>> HASSAN
>>>
>>>
>>>
>>> On 2010-07-28, Moises Silva <moises.silva at gmail.com> wrote:
>>> >> *From:* freeswitch-users-bounces at lists.freeswitch.org [mailto:
>>> >> freeswitch-users-bounces at lists.freeswitch.org] *On Behalf Of
>>> *Imthiyaz
>>> >> Ahmed
>>> >> *Sent:* Tuesday, July 27, 2010 12:11 PM
>>> >> *To:* FreeSWITCH Users Help
>>> >> *Subject:* [Freeswitch-users] Freeswitch Sangoma support for 32 E1 in
>>> one
>>> >> server
>>> >>
>>> >>
>>> >>
>>> >> Hi all
>>> >>
>>> >>
>>> >>
>>> >> I would like to know it is a good idea that we install 32  sangoma E1s
>>> in
>>> >> one server with freeswitch ,openzap and run it on production? We
>>> expect
>>> >> about 960 concurrent tdm calls to go through from the server.
>>> >>
>>> >>
>>> > We do such setups regularly as part of our stress testing with our SS7
>>> and
>>> > PRI/BRI stacks. Typically a quad-core with 4 A108's.
>>> >
>>> > Moises Silva
>>> > Senior Software Engineer
>>> > Sangoma Technologies Inc. | NEW 100 Renfrew Drive, Suite 100, Markham
>>> ON L3R
>>> > 9R6 Canada
>>> > t. 1 905 474 1990 x128 | e. moy at sangoma.com
>>> >
>>>
>>> _______________________________________________
>>> FreeSWITCH-users mailing list
>>> FreeSWITCH-users at lists.freeswitch.org
>>> http://lists.freeswitch.org/mailman/listinfo/freeswitch-users
>>> UNSUBSCRIBE:http://lists.freeswitch.org/mailman/options/freeswitch-users
>>> http://www.freeswitch.org
>>>
>>
>>
>> _______________________________________________
>> FreeSWITCH-users mailing list
>> FreeSWITCH-users at lists.freeswitch.org
>> http://lists.freeswitch.org/mailman/listinfo/freeswitch-users
>> UNSUBSCRIBE:http://lists.freeswitch.org/mailman/options/freeswitch-users
>> http://www.freeswitch.org
>>
>>
>
> _______________________________________________
> FreeSWITCH-users mailing list
> FreeSWITCH-users at lists.freeswitch.org
> http://lists.freeswitch.org/mailman/listinfo/freeswitch-users
> UNSUBSCRIBE:http://lists.freeswitch.org/mailman/options/freeswitch-users
> http://www.freeswitch.org
>
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: http://lists.freeswitch.org/pipermail/freeswitch-users/attachments/20100728/3f1a5239/attachment.html