[Freeswitch-users] Freeswitch - wholesale setup

Fri Jul 9 15:27:29 PDT 2010

Don't forget to buy the FreeSWITCH book!
https://www.packtpub.com/freeswitch-1-0-5-build-robust-high-performance-telephony-systems/book

-MC

On Fri, Jul 9, 2010 at 3:12 PM, Saeed Ahmed <saeedahmad1981 at gmail.com>wrote:

> Hi,
>
> Definitely all of your questions can't be covered but, if you some
> programming knowledge then look for:
>
> - mod_xml_curl
> for doing ip based auth
> credit checks
> basically all of your routing needs
> there are good examples on wiki
>
> - mod_xml_cdr
> to generate the xml based cdr which you can load into database, search on
> list for more details.
>
> - SAT
>
> On Thu, Jul 8, 2010 at 6:04 PM, Madovsky <infos at madovsky.org> wrote:
>
>>  dear Eric,
>>
>> you need to learn from WIKI or pay a consultant.
>>
>> Regards
>>
>> Franck
>>
>> ----- Original Message -----
>> *From:* Peder <peder at networkoblivion.com>
>> *To:* freeswitch-users at lists.freeswitch.org
>> *Sent:* Thursday, July 08, 2010 11:22 AM
>> *Subject:* Re: [Freeswitch-users] Freeswitch - wholesale setup
>>
>>  Um, so you want to setup to be a wholesale SIP provider, but everything
>> on the wiki is way too technical for you?  Your best bet is to email
>> consulting at freeswitch.org and pay for help.  If you ask a specific
>> question you will get answers, but essentially saying “I don’t know
>> anything, please set it all up for me” is going to result in no help at all.
>>
>>
>>
>>
>>
>> *From:* freeswitch-users-bounces at lists.freeswitch.org [mailto:
>> freeswitch-users-bounces at lists.freeswitch.org] *On Behalf Of *Voip Newbie
>> *Sent:* Thursday, July 08, 2010 9:10 AM
>> *To:* freeswitch-users at lists.freeswitch.org
>> *Subject:* [Freeswitch-users] Freeswitch - wholesale setup
>>
>>
>>
>> Dear List,
>>
>> I am new to voip and to freeswitch and I am trying to learn how to setup a
>> wholesale scenario using FreeSwitch. I have very little experience in
>> running wholesale voip business on voipswitch.
>>
>> I know all or most of the answers to my questions are already either in
>> wiki or in list archive, and I am really sorry to email the list asking for
>> help but with the little knowledge I have its way over my head and I failed
>> to compile the information in right way to achieve any result, please
>> forgive me if these questions bother any of you at all.
>>
>> Here is what I wish to achieve with FreeSwitch:
>>
>> 1) Setup username/password less accounts for customers with IP
>> authentication. One customer can have multiple IPs. Customer can send
>> traffic using SIP or H323 protocol. A prefix will be assigned to customer
>> for sending traffic. Eg. 1234 + Country code + Area code + Number.
>> 2) Customer can be post paid or per paid, so need to disable customer's
>> ability to call when assigned credit limit is reached.
>> 3) Setup providers (Gateways) which do not provide username/password for
>> authentication and do not require FreeSwitch to register with them,
>> FreeSwitch IP will be allowed to send traffic directly with a 3-4 digit
>> prefix. Provider can be on H323 or SIP either and can have multiple IPs (1
>> primary and other for fail-over)
>> 4) Customer and providers need access to CDR. So we need to configure
>> Freeswitch the way that it can store CDRs in MySQL database, that database
>> can be accessed by a web application to show CDR on web.
>>
>> *Hardware and OS info:*
>> CentOS 5.4 (Linux 2.6.18-164.15.1.el5PAE on i686)
>> Intel(R) Xeon(R) CPU E5420 @ 2.50GHz, 4 cores
>> 4 GB RAM.
>> 1 GIGABIT NIC with a Public IP address
>>
>> *Progress so far:*
>> 1) FreeSwitch installed with installation procedure at FreeSwitch Wiki (
>> http://wiki.freeswitch.org/wiki/Installation_Guide#Download_Source_Tarball
>> )
>> 2) Registered and called already created extensions (1001,1002) from
>> x-lite, called echo extensions and everything worked fine.
>>
>> *Questions:*
>> 1) I can see there are 2 H323 mods available for FreeSwitch, which one is
>> better to use in production.
>>    a) http://wiki.freeswitch.org/wiki/FreeSwitch_H323
>>    b) http://wiki.freeswitch.org/wiki/Mod_h323
>> 2) How and where (location in freeswitch conf) can I create customers, add
>> IP addresses to authorize without username and password, assign a prefix to
>> the customer? An example would be nice.
>> 3) How and where (location in freeswitch conf) I can create gateways. An
>> example would be nice.
>> 4) Where to create dialplan to route customer calls to provider. An
>> example would be nice.
>> 5) How to manage credit assigned to customers, and how to bill the calls?
>> 6) How to configure Freeswitch so that it can dump CDRs to a mysql
>> database.
>> 7) According to FreeSwitch feature list, it supports g723 and g729 in
>> pass-througe mode, so this means if both customer and providers support g729
>> & g723, calls will pass?
>> 8) Is there any limit on g729 and g723 calls in pass-through mood?
>> 9) Approx how many concurrent calls can FreeSwitch support in H323 and in
>> SIP based on the hardware info given above.
>>
>>  Any pointers, help, links, examples will be highly appreciated.
>>
>> Thanks in advance.
>>
>>
>>
>> -Eric
>>
>> ------------------------------
>>
>> _______________________________________________
>> FreeSWITCH-users mailing list
>> FreeSWITCH-users at lists.freeswitch.org
>> http://lists.freeswitch.org/mailman/listinfo/freeswitch-users
>> UNSUBSCRIBE:http://lists.freeswitch.org/mailman/options/freeswitch-users
>> http://www.freeswitch.org
>>
>>
>> _______________________________________________
>> FreeSWITCH-users mailing list
>> FreeSWITCH-users at lists.freeswitch.org
>> http://lists.freeswitch.org/mailman/listinfo/freeswitch-users
>> UNSUBSCRIBE:http://lists.freeswitch.org/mailman/options/freeswitch-users
>> http://www.freeswitch.org
>>
>>
>
> _______________________________________________
> FreeSWITCH-users mailing list
> FreeSWITCH-users at lists.freeswitch.org
> http://lists.freeswitch.org/mailman/listinfo/freeswitch-users
> UNSUBSCRIBE:http://lists.freeswitch.org/mailman/options/freeswitch-users
> http://www.freeswitch.org
>
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: http://lists.freeswitch.org/pipermail/freeswitch-users/attachments/20100709/354e31be/attachment-0001.html 