[Freeswitch-users] Freeswitch - wholesale setup

[Saeed Ahmed]

Hi,

Definitely all of your questions can't be covered but, if you some
programming knowledge then look for:

- mod_xml_curl
for doing ip based auth
credit checks
basically all of your routing needs
there are good examples on wiki

- mod_xml_cdr
to generate the xml based cdr which you can load into database, search on
list for more details.

- SAT

On Thu, Jul 8, 2010 at 6:04 PM, Madovsky <infos at madovsky.org> wrote:

>  dear Eric,
>
> you need to learn from WIKI or pay a consultant.
>
> Regards
>
> Franck
>
> ----- Original Message -----
> *From:* Peder <peder at networkoblivion.com>
> *To:* freeswitch-users at lists.freeswitch.org
> *Sent:* Thursday, July 08, 2010 11:22 AM
> *Subject:* Re: [Freeswitch-users] Freeswitch - wholesale setup
>
>  Um, so you want to setup to be a wholesale SIP provider, but everything
> on the wiki is way too technical for you?  Your best bet is to email
> consulting at freeswitch.org and pay for help.  If you ask a specific
> question you will get answers, but essentially saying “I don’t know
> anything, please set it all up for me” is going to result in no help at all.
>
>
>
>
>
> *From:* freeswitch-users-bounces at lists.freeswitch.org [mailto:
> freeswitch-users-bounces at lists.freeswitch.org] *On Behalf Of *Voip Newbie
> *Sent:* Thursday, July 08, 2010 9:10 AM
> *To:* freeswitch-users at lists.freeswitch.org
> *Subject:* [Freeswitch-users] Freeswitch - wholesale setup
>
>
>
> Dear List,
>
> I am new to voip and to freeswitch and I am trying to learn how to setup a
> wholesale scenario using FreeSwitch. I have very little experience in
> running wholesale voip business on voipswitch.
>
> I know all or most of the answers to my questions are already either in
> wiki or in list archive, and I am really sorry to email the list asking for
> help but with the little knowledge I have its way over my head and I failed
> to compile the information in right way to achieve any result, please
> forgive me if these questions bother any of you at all.
>
> Here is what I wish to achieve with FreeSwitch:
>
> 1) Setup username/password less accounts for customers with IP
> authentication. One customer can have multiple IPs. Customer can send
> traffic using SIP or H323 protocol. A prefix will be assigned to customer
> for sending traffic. Eg. 1234 + Country code + Area code + Number.
> 2) Customer can be post paid or per paid, so need to disable customer's
> ability to call when assigned credit limit is reached.
> 3) Setup providers (Gateways) which do not provide username/password for
> authentication and do not require FreeSwitch to register with them,
> FreeSwitch IP will be allowed to send traffic directly with a 3-4 digit
> prefix. Provider can be on H323 or SIP either and can have multiple IPs (1
> primary and other for fail-over)
> 4) Customer and providers need access to CDR. So we need to configure
> Freeswitch the way that it can store CDRs in MySQL database, that database
> can be accessed by a web application to show CDR on web.
>
> *Hardware and OS info:*
> CentOS 5.4 (Linux 2.6.18-164.15.1.el5PAE on i686)
> Intel(R) Xeon(R) CPU E5420 @ 2.50GHz, 4 cores
> 4 GB RAM.
> 1 GIGABIT NIC with a Public IP address
>
> *Progress so far:*
> 1) FreeSwitch installed with installation procedure at FreeSwitch Wiki (
> http://wiki.freeswitch.org/wiki/Installation_Guide#Download_Source_Tarball
> )
> 2) Registered and called already created extensions (1001,1002) from
> x-lite, called echo extensions and everything worked fine.
>
> *Questions:*
> 1) I can see there are 2 H323 mods available for FreeSwitch, which one is
> better to use in production.
>    a) http://wiki.freeswitch.org/wiki/FreeSwitch_H323
>    b) http://wiki.freeswitch.org/wiki/Mod_h323
> 2) How and where (location in freeswitch conf) can I create customers, add
> IP addresses to authorize without username and password, assign a prefix to
> the customer? An example would be nice.
> 3) How and where (location in freeswitch conf) I can create gateways. An
> example would be nice.
> 4) Where to create dialplan to route customer calls to provider. An example
> would be nice.
> 5) How to manage credit assigned to customers, and how to bill the calls?
> 6) How to configure Freeswitch so that it can dump CDRs to a mysql
> database.
> 7) According to FreeSwitch feature list, it supports g723 and g729 in
> pass-througe mode, so this means if both customer and providers support g729
> & g723, calls will pass?
> 8) Is there any limit on g729 and g723 calls in pass-through mood?
> 9) Approx how many concurrent calls can FreeSwitch support in H323 and in
> SIP based on the hardware info given above.
>
>  Any pointers, help, links, examples will be highly appreciated.
>
> Thanks in advance.
>
>
>
> -Eric
>
> ------------------------------
>
> _______________________________________________
> FreeSWITCH-users mailing list
> FreeSWITCH-users at lists.freeswitch.org
> http://lists.freeswitch.org/mailman/listinfo/freeswitch-users
> UNSUBSCRIBE:http://lists.freeswitch.org/mailman/options/freeswitch-users
> http://www.freeswitch.org
>
>
> _______________________________________________
> FreeSWITCH-users mailing list
> FreeSWITCH-users at lists.freeswitch.org
> http://lists.freeswitch.org/mailman/listinfo/freeswitch-users
> UNSUBSCRIBE:http://lists.freeswitch.org/mailman/options/freeswitch-users
> http://www.freeswitch.org
>
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: http://lists.freeswitch.org/pipermail/freeswitch-users/attachments/20100710/9e3390dd/attachment.html