[Freeswitch-users] h323 - sip call is not working

[Tihomir Culjaga]

On Thu, Feb 11, 2010 at 4:18 PM, Nikolay Kondratyev <kond at nstel.ru> wrote:

>  Tihomir,
>
> Thanks for help.
>
> I enabled fast start on IPO and I can hear voice now. But the ringback tone
> and voice appears to be wheezy, but I will investigate that tomorrow.
>

set framing time for your codec to 30ms in IPO, also play with  PI in
alerting... set it to 2.



> Thanks again.
>
> Nikolay.
>
>
>
>
>
>
>   ------------------------------
>
> *From:* freeswitch-users-bounces at lists.freeswitch.org [mailto:
> freeswitch-users-bounces at lists.freeswitch.org] *On Behalf Of *Tihomir
> Culjaga
> *Sent:* Thursday, February 11, 2010 2:34 PM
>
> *To:* freeswitch-users at lists.freeswitch.org
> *Subject:* Re: [Freeswitch-users] h323 - sip call is not working
>
>
>
> Nikolay, you are sending slow start with tunneling=true ?!?!
>
>
> It is not gong to work :)
>
> Please can you set fast start instead?
>
>
> Your call failed because there was no mediaControll channel negotiated at
> all... actually the call had to be aborted because wrong signaling .. but
> anyhow.
>
> Please on your IPO use FastStart with h245Tunneling=true... also, same
> settings on FS side as well (exclude h245 in setup as well).
>
>
>
>
> Frame 13 (277 bytes on wire, 277 bytes captured)
> Ethernet II, Src: AlliedTe_22:9b:4a (00:00:cd:22:9b:4a), Dst:
> Vmware_67:33:a7 (00:0c:29:67:33:a7)
> Internet Protocol, Src: 172.23.14.2 (172.23.14.2), Dst: 172.23.22.49
> (172.23.22.49)
> Transmission Control Protocol, Src Port: oirtgsvc (4141), Dst Port:
> h323hostcall (1720), Seq: 1, Ack: 1, Len: 223
> TPKT, Version: 3, Length: 223
> Q.931
>     Protocol discriminator: Q.931
>     Call reference value length: 2
>     Call reference flag: Message sent from originating side
>     Call reference value: 0012
>     Message type: SETUP (0x05)
>     Bearer capability
>     Display  'Gornak Alexandr>2853'
>     Calling party number: '5840'
>     Called party number: '2853'
>     User-user
> H.225.0 CS
>     H323-UserInformation
>         h323-uu-pdu
>             h323-message-body: setup (0)
>                 setup
>             h4501SupplementaryService: 1 item
>            * 1... .... h245Tunneling: True*
>
>
>
>
>
>
>  On Thu, Feb 11, 2010 at 9:18 AM, Nikolay Kondratyev <kond at nstel.ru>
> wrote:
>
> > But I do recommenf to use SIP, since it's much better supported by FS.
> >
> > /Peter
>
> But SIP is poorly supported by IPO.
> Thanks and regards,
>
> Nikolay.
>
>
> _______________________________________________
> FreeSWITCH-users mailing list
> FreeSWITCH-users at lists.freeswitch.org
>
> http://lists.freeswitch.org/mailman/listinfo/freeswitch-users
> UNSUBSCRIBE:http://lists.freeswitch.org/mailman/options/freeswitch-users
> http://www.freeswitch.org
>
>
>
> _______________________________________________
> FreeSWITCH-users mailing list
> FreeSWITCH-users at lists.freeswitch.org
> http://lists.freeswitch.org/mailman/listinfo/freeswitch-users
> UNSUBSCRIBE:http://lists.freeswitch.org/mailman/options/freeswitch-users
> http://www.freeswitch.org
>
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: http://lists.freeswitch.org/pipermail/freeswitch-users/attachments/20100211/bc426167/attachment-0002.html