[Freeswitch-users] h323 - sip call is not working

Nikolay Kondratyev kond at nstel.ru
Thu Feb 11 07:18:18 PST 2010


Tihomir,

Thanks for help.

I enabled fast start on IPO and I can hear voice now. But the ringback tone
and voice appears to be wheezy, but I will investigate that tomorrow.

Thanks again.

Nikolay.

 

 

 

  _____  

From: freeswitch-users-bounces at lists.freeswitch.org
[mailto:freeswitch-users-bounces at lists.freeswitch.org] On Behalf Of Tihomir
Culjaga
Sent: Thursday, February 11, 2010 2:34 PM
To: freeswitch-users at lists.freeswitch.org
Subject: Re: [Freeswitch-users] h323 - sip call is not working

 

Nikolay, you are sending slow start with tunneling=true ?!?!

It is not gong to work :)

Please can you set fast start instead?


Your call failed because there was no mediaControll channel negotiated at
all... actually the call had to be aborted because wrong signaling .. but
anyhow.

Please on your IPO use FastStart with h245Tunneling=true... also, same
settings on FS side as well (exclude h245 in setup as well).




Frame 13 (277 bytes on wire, 277 bytes captured)
Ethernet II, Src: AlliedTe_22:9b:4a (00:00:cd:22:9b:4a), Dst:
Vmware_67:33:a7 (00:0c:29:67:33:a7)
Internet Protocol, Src: 172.23.14.2 (172.23.14.2), Dst: 172.23.22.49
(172.23.22.49)
Transmission Control Protocol, Src Port: oirtgsvc (4141), Dst Port:
h323hostcall (1720), Seq: 1, Ack: 1, Len: 223
TPKT, Version: 3, Length: 223
Q.931
    Protocol discriminator: Q.931
    Call reference value length: 2
    Call reference flag: Message sent from originating side
    Call reference value: 0012
    Message type: SETUP (0x05)
    Bearer capability
    Display  'Gornak Alexandr>2853'
    Calling party number: '5840'
    Called party number: '2853'
    User-user
H.225.0 CS
    H323-UserInformation
        h323-uu-pdu
            h323-message-body: setup (0)
                setup
            h4501SupplementaryService: 1 item
            1... .... h245Tunneling: True








On Thu, Feb 11, 2010 at 9:18 AM, Nikolay Kondratyev <kond at nstel.ru> wrote:

> But I do recommenf to use SIP, since it's much better supported by FS.
>
> /Peter

But SIP is poorly supported by IPO.
Thanks and regards,

Nikolay.


_______________________________________________
FreeSWITCH-users mailing list
FreeSWITCH-users at lists.freeswitch.org

http://lists.freeswitch.org/mailman/listinfo/freeswitch-users
UNSUBSCRIBE:http://lists.freeswitch.org/mailman/options/freeswitch-users
http://www.freeswitch.org

 

-------------- next part --------------
An HTML attachment was scrubbed...
URL: http://lists.freeswitch.org/pipermail/freeswitch-users/attachments/20100211/fc3f9420/attachment-0002.html 


More information about the FreeSWITCH-users mailing list