[Freeswitch-users] Dial Timeout Issue

Peder peder at networkoblivion.com
Thu Apr 29 11:53:11 PDT 2010


That works, thanks.  Anybody have any idea why this doesn't accomplish the
same thing:

 

<action application="set" data="originate_timeout=4"/>

 

 

 

From: freeswitch-users-bounces at lists.freeswitch.org
[mailto:freeswitch-users-bounces at lists.freeswitch.org] On Behalf Of Rupa
Schomaker
Sent: Thursday, April 29, 2010 1:37 PM
To: freeswitch-users
Subject: Re: [Freeswitch-users] Dial Timeout Issue

 

You won't be able to do it that way.  lcr is already using the [] and you
can't get two for each leg.  So, either use the same timeout for all legs
using {leg_timeout=5} or you can push me to get the new mod_lcr in which
lets you put arbitrary key/value pairs in their populated from your
custom_sql.  Unfortunately I'm travelling next week so I don't see doing
something sooner than that...

On Thu, Apr 29, 2010 at 10:50 AM, Peder <peder at networkoblivion.com> wrote:

Didn't like that at all.  Here is what I have in dialplan:

<action application="bridge"
data="[leg_timeout=4]${lcr_route_1}|[leg_timeout=6]${lcr_route_2}"/>

 

 

Here is debug:

 

EXECUTE sofia/internal/1111 at 192.168.1.108
bridge([leg_timeout=4][lcr_carrier=tex,lcr_rate=0.01900]sofia/gateway/Tex/55
51212|[leg_timeout=6][lcr_carrier=tel,lcr_rate=0.03000]sofia/gateway/Tel/555
1212)

 

2010-04-29 15:40:12.370181 [ERR] switch_core_session.c:360 Could not locate
channel type [lcr_carrier=tex|lcr_rate=0.01900]sofia

 

2010-04-29 15:40:12.370181 [ERR] switch_ivr_originate.c:2480 Cannot create
outgoing channel of type [[lcr_carrier=tex|lcr_rate=0.01900]sofia] cause:
[CHAN_NOT_IMPLEMENTED]

 

2010-04-29 15:40:12.370181 [DEBUG] switch_ivr_originate.c:3299 Originate
Resulted in Error Cause: 66 [CHAN_NOT_IMPLEMENTED]

 

2010-04-29 15:40:12.370181 [ERR] switch_core_session.c:360 Could not locate
channel type [lcr_carrier=tel|lcr_rate=0.03000]sofia

 

2010-04-29 15:40:12.370181 [ERR] switch_ivr_originate.c:2480 Cannot create
outgoing channel of type [[lcr_carrier=tel|lcr_rate=0.03000]sofia] cause:
[CHAN_NOT_IMPLEMENTED]

 

 

Since ${lcr_route_1} already contains variables in [], it appears that the
extra set in the beginning may be causing an issue.  Note that it is
chopping off the dialstring after sofia (should be sofia/gateway/Tex/5551212
and just shows as sofia) and the "leg_timeout" appears to disappear too.  If
I remove the leg timeouts, I do see it bridge "sofia/external/5551212".  Any
other ideas?

 

 

From: freeswitch-users-bounces at lists.freeswitch.org
[mailto:freeswitch-users-bounces at lists.freeswitch.org] On Behalf Of Michael
Collins
Sent: Wednesday, April 28, 2010 7:00 PM
To: freeswitch-users at lists.freeswitch.org
Subject: Re: [Freeswitch-users] Dial Timeout Issue

 

Is it failing because gateway1 is not responding at all? If so then I'd say
you'd need to use leg_timeout or leg_media_timeout on each leg as needed:

<action application="bridge"
data="[leg_timeout=4]${lcr_route_1}|[leg_timeout=6]${lcr_route_2}"/>

Check these variables:
http://wiki.freeswitch.org/wiki/Channel_Variables#leg_timeout

Test it out and let us know.
-MC

On Wed, Apr 28, 2010 at 2:17 PM, Peder <peder at networkoblivion.com> wrote:

I'm having an issue where originate_timeout doesn't seem to be working as I
think it would.  I am using lcr to get the gateways.  I can bridge to either
gateway1 or 2 just fine.  Then I set it up with bridge using both gateways
for failover and it worked fine.  I decided to change gateway1 to a fake IP
to test failover and it works, but it takes 30 seconds to timeout.  I then
found originate_timeout and set it to 4 seconds, but it doesn't timeout.  It
still takes 30 seconds.


Here is the snippet from my dialplan:

<action application="set" data="originate_timeout=4"/>
<action application="bridge" data="${lcr_route_1}|${lcr_route_2}"/>


Here is the debug that shows it is being set:

EXECUTE sofia/internal/1111 at 192.168.1.108 set(originate_timeout=4)
2010-04-28 16:06:28.265187 [DEBUG] mod_dptools.c:818
sofia/internal/1111 at 192.168.1.108 SET [originate_timeout]=[4]
EXECUTE sofia/internal/1111 at 192.168.1.108
bridge([lcr_carrier=tex,lcr_rate=0.01900]sofia/gateway/Tex/5551212|[lcr_carr
ier=tel,lcr_rate=0.03000]sofia/gateway/Tel/5551212)

Then I get this:
2010-04-28 16:07:00.273156 [NOTICE] sofia.c:4547 Hangup
sofia/external/5551212 [CS_CONSUME_MEDIA] [RECOVERY_ON_TIMER_EXPIRE]


And it successfully goes out gateway2, but it is 30 seconds later, not 4 as
I would guess.  Am I using the timeout wrong?  Or is there some other
setting I need instead?


_______________________________________________
FreeSWITCH-users mailing list
FreeSWITCH-users at lists.freeswitch.org
http://lists.freeswitch.org/mailman/listinfo/freeswitch-users
UNSUBSCRIBE:http://lists.freeswitch.org/mailman/options/freeswitch-users
http://www.freeswitch.org

 


_______________________________________________
FreeSWITCH-users mailing list
FreeSWITCH-users at lists.freeswitch.org
http://lists.freeswitch.org/mailman/listinfo/freeswitch-users
UNSUBSCRIBE:http://lists.freeswitch.org/mailman/options/freeswitch-users
http://www.freeswitch.org




-- 
-Rupa

-------------- next part --------------
An HTML attachment was scrubbed...
URL: http://lists.freeswitch.org/pipermail/freeswitch-users/attachments/20100429/96916657/attachment.html 


More information about the FreeSWITCH-users mailing list