[Freeswitch-users] Dial Timeout Issue

Thu Apr 29 11:36:30 PDT 2010

You won't be able to do it that way.  lcr is already using the [] and you
can't get two for each leg.  So, either use the same timeout for all legs
using {leg_timeout=5} or you can push me to get the new mod_lcr in which
lets you put arbitrary key/value pairs in their populated from your
custom_sql.  Unfortunately I'm travelling next week so I don't see doing
something sooner than that...

On Thu, Apr 29, 2010 at 10:50 AM, Peder <peder at networkoblivion.com> wrote:

>  Didn’t like that at all.  Here is what I have in dialplan:
>
> <action application="bridge"
> data="[leg_timeout=4]${lcr_route_1}|[leg_timeout=6]${lcr_route_2}"/>
>
>
>
>
>
> Here is debug:
>
>
>
> EXECUTE sofia/internal/1111 at 192.168.1.108bridge([leg_timeout=4][lcr_carrier=tex,lcr_rate=0.01900]sofia/gateway/Tex/5551212|[leg_timeout=6][lcr_carrier=tel,lcr_rate=0.03000]sofia/gateway/Tel/5551212)
>
>
>
> 2010-04-29 15:40:12.370181 [ERR] switch_core_session.c:360 Could not locate
> channel type [lcr_carrier=tex|lcr_rate=0.01900]sofia
>
>
>
> 2010-04-29 15:40:12.370181 [ERR] switch_ivr_originate.c:2480 Cannot create
> outgoing channel of type [[lcr_carrier=tex|lcr_rate=0.01900]sofia] cause:
> [CHAN_NOT_IMPLEMENTED]
>
>
>
> 2010-04-29 15:40:12.370181 [DEBUG] switch_ivr_originate.c:3299 Originate
> Resulted in Error Cause: 66 [CHAN_NOT_IMPLEMENTED]
>
>
>
> 2010-04-29 15:40:12.370181 [ERR] switch_core_session.c:360 Could not locate
> channel type [lcr_carrier=tel|lcr_rate=0.03000]sofia
>
>
>
> 2010-04-29 15:40:12.370181 [ERR] switch_ivr_originate.c:2480 Cannot create
> outgoing channel of type [[lcr_carrier=tel|lcr_rate=0.03000]sofia] cause:
> [CHAN_NOT_IMPLEMENTED]
>
>
>
>
>
> Since ${lcr_route_1} already contains variables in [], it appears that the
> extra set in the beginning may be causing an issue.  Note that it is
> chopping off the dialstring after sofia (should be sofia/gateway/Tex/5551212
> and just shows as sofia) and the “leg_timeout” appears to disappear too.  If
> I remove the leg timeouts, I do see it bridge “sofia/external/5551212”.  Any
> other ideas?
>
>
>
>
>
> *From:* freeswitch-users-bounces at lists.freeswitch.org [mailto:
> freeswitch-users-bounces at lists.freeswitch.org] *On Behalf Of *Michael
> Collins
> *Sent:* Wednesday, April 28, 2010 7:00 PM
> *To:* freeswitch-users at lists.freeswitch.org
> *Subject:* Re: [Freeswitch-users] Dial Timeout Issue
>
>
>
> Is it failing because gateway1 is not responding at all? If so then I'd say
> you'd need to use leg_timeout or leg_media_timeout on each leg as needed:
>
> <action application="bridge"
> data="[leg_timeout=4]${lcr_route_1}|[leg_timeout=6]${lcr_route_2}"/>
>
> Check these variables:
> http://wiki.freeswitch.org/wiki/Channel_Variables#leg_timeout
>
> Test it out and let us know.
> -MC
>
> On Wed, Apr 28, 2010 at 2:17 PM, Peder <peder at networkoblivion.com> wrote:
>
> I'm having an issue where originate_timeout doesn't seem to be working as I
> think it would.  I am using lcr to get the gateways.  I can bridge to
> either
> gateway1 or 2 just fine.  Then I set it up with bridge using both gateways
> for failover and it worked fine.  I decided to change gateway1 to a fake IP
> to test failover and it works, but it takes 30 seconds to timeout.  I then
> found originate_timeout and set it to 4 seconds, but it doesn't timeout.
>  It
> still takes 30 seconds.
>
>
> Here is the snippet from my dialplan:
>
> <action application="set" data="originate_timeout=4"/>
> <action application="bridge" data="${lcr_route_1}|${lcr_route_2}"/>
>
>
> Here is the debug that shows it is being set:
>
> EXECUTE sofia/internal/1111 at 192.168.1.108 set(originate_timeout=4)
> 2010-04-28 16:06:28.265187 [DEBUG] mod_dptools.c:818
> sofia/internal/1111 at 192.168.1.108 SET [originate_timeout]=[4]
> EXECUTE sofia/internal/1111 at 192.168.1.108
>
> bridge([lcr_carrier=tex,lcr_rate=0.01900]sofia/gateway/Tex/5551212|[lcr_carr
> ier=tel,lcr_rate=0.03000]sofia/gateway/Tel/5551212)
>
> Then I get this:
> 2010-04-28 16:07:00.273156 [NOTICE] sofia.c:4547 Hangup
> sofia/external/5551212 [CS_CONSUME_MEDIA] [RECOVERY_ON_TIMER_EXPIRE]
>
>
> And it successfully goes out gateway2, but it is 30 seconds later, not 4 as
> I would guess.  Am I using the timeout wrong?  Or is there some other
> setting I need instead?
>
>
> _______________________________________________
> FreeSWITCH-users mailing list
> FreeSWITCH-users at lists.freeswitch.org
> http://lists.freeswitch.org/mailman/listinfo/freeswitch-users
> UNSUBSCRIBE:http://lists.freeswitch.org/mailman/options/freeswitch-users
> http://www.freeswitch.org
>
>
>
> _______________________________________________
> FreeSWITCH-users mailing list
> FreeSWITCH-users at lists.freeswitch.org
> http://lists.freeswitch.org/mailman/listinfo/freeswitch-users
> UNSUBSCRIBE:http://lists.freeswitch.org/mailman/options/freeswitch-users
> http://www.freeswitch.org
>
>

-- 
-Rupa
-------------- next part --------------
An HTML attachment was scrubbed...
URL: http://lists.freeswitch.org/pipermail/freeswitch-users/attachments/20100429/17836bcc/attachment-0003.html 