[Freeswitch-users] {Scanned} Re: {Scanned} Re: {Scanned} wanpipe 3.6.0.13 openzap will not compile

[David Yat Sin]

Hi Tom,
The B601 will not work with sangoma_prid because the B601 does not have 
a hardware HDLC framer implemented (which is required by sangoma_prid).

If you need a PRI interface, you can still use the B601 and configure 
the T1/E1 port in "zaptel mode" and use libpri instead.

If you need a RBS interface, the B601 will work fine.

Regards,

*David Yat Sin, **BEng**, **Software Engineer**
*Sangoma Technologies Inc. | 50 McIntosh Drive, Suite 120, Markham ON 
L3R 9T3 Canada
t. 1 905 474 1990 x 119 | e. _dyatsin at sangoma.com 
<mailto:dyatsin at sangoma.com>_


On 4/12/2010 4:26 PM, Tom wrote:
> Michael Collins wrote:
>    
>> Is this a fresh git (or svn) checkout of FreeSWITCH? I just did a make
>> current this morning on a system with oz&  wanpipe. I used version
>> 3.5.10 from Sangoma's site:
>>
>> http://wiki.sangoma.com/wanpipe-linux-drivers#latest
>> Specifically:
>> ftp://ftp.sangoma.com/linux/current_wanpipe/wanpipe-3.5.10.tgz
>>
>> Uninstall the wanpipe version you have now using the "./Setup
>> uninstall" method and then download&  install 3.5.10 and try again.
>> -MC
>>
>> On Mon, Apr 12, 2010 at 12:10 PM, Tom<tomb at cachecomm.com
>> <mailto:tomb at cachecomm.com>>  wrote:
>>
>>      Freeswitch Gods,
>>      I just bought a B601 Sangoma card. The Wanpipe install went will i get
>>      this from a hwprobe
>>      -------------------------------
>>      | Wanpipe Hardware Probe Info |
>>      -------------------------------
>>      1 . AFT-B601-SH : SLOT=4 : BUS=3 : IRQ=90 : PORT=1 : HWEC=64 : V=03
>>      2 . AFT-B601-SH : SLOT=4 : BUS=3 : IRQ=90 : PORT=2 : HWEC=64 : V=03
>>
>>      Card Cnt: B601=1
>>
>>
>>      but when i go to compile the openzap drivers i get the fallowing
>>      errors
>>
>>      ozmod_wanpipe_la-ozmod_wanpipe.lo -MD -MP -MF
>>      .deps/ozmod_wanpipe_la-ozmod_wanpipe.Tpo -c
>>      src/ozmod/ozmod_wanpipe/ozmod_wanpipe.c  -fPIC -DPIC -o
>>      .libs/ozmod_wanpipe_la-ozmod_wanpipe.o
>>      cc1: warnings being treated as errors
>>      src/ozmod/ozmod_wanpipe/ozmod_wanpipe.c: In function 'wanpipe_open':
>>      src/ozmod/ozmod_wanpipe/ozmod_wanpipe.c:493: warning: implicit
>>      declaration of function 'sangoma_flush_event_bufs'
>>      make: *** [ozmod_wanpipe_la-ozmod_wanpipe.lo] Error 1
>>
>>      I tried to remove the /usr/include/libsangoma.h
>>      that still stops on errors. I tried the 3.5 driver branch still
>>      the same
>>      thing.
>>      what i am doing wrong
>>
>>      Tom
>>
>>      _______________________________________________
>>      FreeSWITCH-users mailing list
>>      FreeSWITCH-users at lists.freeswitch.org
>>      <mailto:FreeSWITCH-users at lists.freeswitch.org>
>>      http://lists.freeswitch.org/mailman/listinfo/freeswitch-users
>>      UNSUBSCRIBE:http://lists.freeswitch.org/mailman/options/freeswitch-users
>>      http://www.freeswitch.org
>>
>>
>> ------------------------------------------------------------------------
>>
>> _______________________________________________
>> FreeSWITCH-users mailing list
>> FreeSWITCH-users at lists.freeswitch.org
>> http://lists.freeswitch.org/mailman/listinfo/freeswitch-users
>> UNSUBSCRIBE:http://lists.freeswitch.org/mailman/options/freeswitch-users
>> http://www.freeswitch.org
>>
>>      
> MC,
> i just got off the phone with Sangoma they said the the B601 card will
> only work with the 3.6 driver. Which will not work with openzap is that
> right.
>
>
> Thanks
>
> Tom
>
> _______________________________________________
> FreeSWITCH-users mailing list
> FreeSWITCH-users at lists.freeswitch.org
> http://lists.freeswitch.org/mailman/listinfo/freeswitch-users
> UNSUBSCRIBE:http://lists.freeswitch.org/mailman/options/freeswitch-users
> http://www.freeswitch.org
>    
-------------- next part --------------
An HTML attachment was scrubbed...
URL: http://lists.freeswitch.org/pipermail/freeswitch-users/attachments/20100412/0d8d689a/attachment-0001.html 
-------------- next part --------------
A non-text attachment was scrubbed...
Name: dyatsin.vcf
Type: text/x-vcard
Size: 290 bytes
Desc: not available
Url : http://lists.freeswitch.org/pipermail/freeswitch-users/attachments/20100412/0d8d689a/attachment-0001.vcf