[Freeswitch-users] {Scanned} Re: {Scanned} Re: {Scanned} wanpipe 3.6.0.13 openzap will not compile

Tom tomb at cachecomm.com
Mon Apr 12 13:26:03 PDT 2010


Michael Collins wrote:
> Is this a fresh git (or svn) checkout of FreeSWITCH? I just did a make 
> current this morning on a system with oz & wanpipe. I used version 
> 3.5.10 from Sangoma's site:
>
> http://wiki.sangoma.com/wanpipe-linux-drivers#latest
> Specifically: 
> ftp://ftp.sangoma.com/linux/current_wanpipe/wanpipe-3.5.10.tgz
>
> Uninstall the wanpipe version you have now using the "./Setup 
> uninstall" method and then download & install 3.5.10 and try again.
> -MC
>
> On Mon, Apr 12, 2010 at 12:10 PM, Tom <tomb at cachecomm.com 
> <mailto:tomb at cachecomm.com>> wrote:
>
>     Freeswitch Gods,
>     I just bought a B601 Sangoma card. The Wanpipe install went will i get
>     this from a hwprobe
>     -------------------------------
>     | Wanpipe Hardware Probe Info |
>     -------------------------------
>     1 . AFT-B601-SH : SLOT=4 : BUS=3 : IRQ=90 : PORT=1 : HWEC=64 : V=03
>     2 . AFT-B601-SH : SLOT=4 : BUS=3 : IRQ=90 : PORT=2 : HWEC=64 : V=03
>
>     Card Cnt: B601=1
>
>
>     but when i go to compile the openzap drivers i get the fallowing
>     errors
>
>     ozmod_wanpipe_la-ozmod_wanpipe.lo -MD -MP -MF
>     .deps/ozmod_wanpipe_la-ozmod_wanpipe.Tpo -c
>     src/ozmod/ozmod_wanpipe/ozmod_wanpipe.c  -fPIC -DPIC -o
>     .libs/ozmod_wanpipe_la-ozmod_wanpipe.o
>     cc1: warnings being treated as errors
>     src/ozmod/ozmod_wanpipe/ozmod_wanpipe.c: In function 'wanpipe_open':
>     src/ozmod/ozmod_wanpipe/ozmod_wanpipe.c:493: warning: implicit
>     declaration of function 'sangoma_flush_event_bufs'
>     make: *** [ozmod_wanpipe_la-ozmod_wanpipe.lo] Error 1
>
>     I tried to remove the /usr/include/libsangoma.h
>     that still stops on errors. I tried the 3.5 driver branch still
>     the same
>     thing.
>     what i am doing wrong
>
>     Tom
>
>     _______________________________________________
>     FreeSWITCH-users mailing list
>     FreeSWITCH-users at lists.freeswitch.org
>     <mailto:FreeSWITCH-users at lists.freeswitch.org>
>     http://lists.freeswitch.org/mailman/listinfo/freeswitch-users
>     UNSUBSCRIBE:http://lists.freeswitch.org/mailman/options/freeswitch-users
>     http://www.freeswitch.org
>
>
> ------------------------------------------------------------------------
>
> _______________________________________________
> FreeSWITCH-users mailing list
> FreeSWITCH-users at lists.freeswitch.org
> http://lists.freeswitch.org/mailman/listinfo/freeswitch-users
> UNSUBSCRIBE:http://lists.freeswitch.org/mailman/options/freeswitch-users
> http://www.freeswitch.org
>   
MC,
i just got off the phone with Sangoma they said the the B601 card will 
only work with the 3.6 driver. Which will not work with openzap is that 
right.


Thanks

Tom



More information about the FreeSWITCH-users mailing list