[Freeswitch-users] No caller/called ID received (Wildcard X101P)

[Anthony Minessale]

like i said,

in openzap.conf change
number => 1

to

number => <your number here>

and you will not see the call arriving at ext 1 anymore
this has nothing to do with caller id.

We so far have only tested the caller id code in US so if es uses the same
one as uk or jp
we may have to add some more code.

Can you press F8 on the FS cli to turn on max debug and reproduce an inbound
call and post the log to
http://pastebin.freeswitch.org



On Wed, Jan 14, 2009 at 8:38 AM, Tomás <tomasborrella at gmail.com> wrote:

> Hi,
>
> Anthony, I think that's my problem, when I receive a call from the PSTN, FS
> receive number 1 instead of my house number and I don't know why.
>
> Michael, I live in Spain, Is it not "es" the tonegroup I should use?
>
> Thank you very much.
>
> On Wed, Jan 14, 2009 at 3:18 PM, Michael Jerris <mike at jerris.com> wrote:
>
>> I noticed tonegroup=es.  What country are you in and do you know what
>> method they use to do dtmf.  Most likely we need a small tweak to set the
>> dtmf method for your country.
>> Mike
>>
>> On Jan 14, 2009, at 9:05 AM, Anthony Minessale wrote:
>>
>>
>> number => 1
>>
>> This value should be set to the DID of the FXO line.
>> That way when a call hits FS it will go to that extension in the dialplan.
>> This is unrelated to callerid, it's the destination not the source.
>>
>> If the line has caller-id it will also be available when it's collected
>> after the 2nd ring.
>>
>>
>>
>> On Wed, Jan 14, 2009 at 5:54 AM, Tomás <tomasborrella at gmail.com> wrote:
>>
>>> Hi all,
>>>
>>> I'm a new FreeSwitch user and this is my first email to the list.
>>>
>>> I'm trying to configure my Home PBX with a Wildcard X101P (configured as
>>> FXO) and I have a problem receiving the caller/called ID from PSTN.
>>>
>>> This is the content of file "openzap.conf":
>>>
>>> [span zt]
>>> name => OpenZAP
>>> number => 1
>>> fxo-channel => 1
>>>
>>> And this is the content of file "openzap.conf.xml":
>>>
>>> <configuration name="openzap.conf" description="OpenZAP Configuration">
>>>   <settings>
>>>     <param name="debug" value="0"/>
>>>   </settings>
>>>   <analog_spans>
>>>     <span id="1">
>>>       <param name="tonegroup" value="es"/>
>>>       <param name="digit-timeout" value="2000"/>
>>>       <param name="max-digits" value="11"/>
>>>       <param name="dialplan" value="XML"/>
>>>       <param name="context" value="default"/>
>>>       <param name="enable-callerid" value="true"/>
>>>     </span>
>>>   </analog_spans>
>>> </configuration>
>>>
>>> As you can see the param "enable-callerid" is set to "true", but when I
>>> received and incoming call, FreeSwitch doesn't get neither the caller number
>>> nor the called number (instead of my home number, I receive a number 1, as
>>> can be seen on the following log of an incoming call):
>>>
>>> 2009-01-14 20:43:12 [NOTICE] switch_channel.c:565
>>> switch_channel_set_name() New Channel OpenZAP/1:1/1
>>> [941d6234-e273-11dd-bcdf-89190a30fe61]
>>> 2009-01-14 20:43:12 [INFO] mod_dialplan_xml.c:233 dialplan_hunt()
>>> Processing OpenZAP->1  in context default
>>> 2009-01-14 20:43:12 [NOTICE] switch_ivr.c:1255
>>> switch_ivr_session_transfer() Transfer OpenZAP/1:1/1  to enum[1 at default]
>>> 2009-01-14 20:43:16 [INFO] switch_core_state_machine.c:122
>>> switch_core_standard_on_routing() No Route, Aborting
>>> 2009-01-14 20:43:16 [NOTICE] switch_core_state_machine.c:123
>>> switch_core_standard_on_routing() Hangup OpenZAP/1:1/1  [CS_ROUTING]
>>> [NO_ROUTE_DESTINATION]
>>> 2009-01-14 20:43:16 [NOTICE] switch_core_session.c:960
>>> switch_core_session_thread() Session 1 (OpenZAP/1:1/1 ) Ended
>>> 2009-01-14 20:43:16 [NOTICE] switch_core_session.c:962
>>> switch_core_session_thread() Close Channel OpenZAP/1:1/1  [CS_HANGUP]
>>> 2009-01-14 20:43:23 [NOTICE] switch_channel.c:565
>>> switch_channel_set_name() New Channel OpenZAP/1:1/1
>>> [9af53280-e273-11dd-bcdf-89190a30fe61]
>>>
>>>
>> _______________________________________________
>> Freeswitch-users mailing list
>> Freeswitch-users at lists.freeswitch.org
>> http://lists.freeswitch.org/mailman/listinfo/freeswitch-users
>> UNSUBSCRIBE:http://lists.freeswitch.org/mailman/options/freeswitch-users
>> http://www.freeswitch.org
>>
>>
>
> _______________________________________________
> Freeswitch-users mailing list
> Freeswitch-users at lists.freeswitch.org
> http://lists.freeswitch.org/mailman/listinfo/freeswitch-users
> UNSUBSCRIBE:http://lists.freeswitch.org/mailman/options/freeswitch-users
> http://www.freeswitch.org
>
>


-- 
Anthony Minessale II

FreeSWITCH http://www.freeswitch.org/
ClueCon http://www.cluecon.com/

AIM: anthm
MSN:anthony_minessale at hotmail.com <MSN%3Aanthony_minessale at hotmail.com>
GTALK/JABBER/PAYPAL:anthony.minessale at gmail.com<PAYPAL%3Aanthony.minessale at gmail.com>
IRC: irc.freenode.net #freeswitch

FreeSWITCH Developer Conference
sip:888 at conference.freeswitch.org <sip%3A888 at conference.freeswitch.org>
iax:guest at conference.freeswitch.org/888
googletalk:conf+888 at conference.freeswitch.org<googletalk%3Aconf%2B888 at conference.freeswitch.org>
pstn:213-799-1400
-------------- next part --------------
An HTML attachment was scrubbed...
URL: http://lists.freeswitch.org/pipermail/freeswitch-users/attachments/20090114/f004bc12/attachment-0002.html