[Freeswitch-users] Openzap doesn't work

["Franziska Röhler"]

I use q931 too.

openzap.conf.xml

<configuration name="openzap.conf" description="OpenZAP Configuration">
  <settings>
    <param name="debug" value="0"/>
    <!--<param name="hold-music" value="$${moh_uri}"/>-->
    <!--<param name="enable-analog-option" value="call-swap"/>-->
    <!--<param name="enable-analog-option" value="3-way"/>-->
  </settings>
  <!-- one entry here per openzap span -->
  <pri_spans>
    <span id="1">
      <param name="mode" value="user"/>
      <param name="dialect" value="q931"/>
      <param name="dialplan" value="XML"/>
      <param name="context" value="default"/>
    </span>
  </pri_spans>
</configuration>

openzap.conf

[span zt]
name => OpenZap
number => 1
trunk_type => e1
b-channel => 1-15, 17-31
d-channel => 16

cat /proc/zaptel/*
Span 1: WCT1/0 "Digium Wildcard TE110P T1/E1 Card 0" (MASTER) HDB3/CCS/CRC4 RECOVERING

           1 WCT1/0/1 Clear (In use) RED
           2 WCT1/0/2 Clear (In use) RED
           3 WCT1/0/3 Clear (In use) RED
           4 WCT1/0/4 Clear (In use) RED
           5 WCT1/0/5 Clear (In use) RED
           6 WCT1/0/6 Clear (In use) RED
           7 WCT1/0/7 Clear (In use) RED
           8 WCT1/0/8 Clear (In use) RED
           9 WCT1/0/9 Clear (In use) RED
          10 WCT1/0/10 Clear (In use) RED
          11 WCT1/0/11 Clear (In use) RED
          12 WCT1/0/12 Clear (In use) RED
          13 WCT1/0/13 Clear (In use) RED
          14 WCT1/0/14 Clear (In use) RED
          15 WCT1/0/15 Clear (In use) RED
          16 WCT1/0/16 HDLCFCS (In use) RED
          17 WCT1/0/17 Clear (In use) RED
          18 WCT1/0/18 Clear (In use) RED
          19 WCT1/0/19 Clear (In use) RED
          20 WCT1/0/20 Clear (In use) RED
          21 WCT1/0/21 Clear (In use) RED
          22 WCT1/0/22 Clear (In use) RED
          23 WCT1/0/23 Clear (In use) RED
          24 WCT1/0/24 Clear (In use) RED
          25 WCT1/0/25 Clear (In use) RED
          26 WCT1/0/26 Clear (In use) RED
          27 WCT1/0/27 Clear (In use) RD
          28 WCT1/0/28 Clear (In use) RED
          29 WCT1/0/29 Clear (In use) RED
          30 WCT1/0/30 Clear (In use) RED
          31 WCT1/0/31 Clear (In use) RED

Why is it RED? zttool shows no alarms (ok) and ztfcg -vv shows that 31 Channels to configure.



> I had the same problem a while ago with German PRI lines (S2M).
> 
> Do you have
>  <param name="dialect" value="q931"/>
> in your
> openzap.conf.xml?
> 
> In older Versions of openzap I used euro, in newer releases this didn't
> work any more, so I used q931.
> 
> If this is not successfull,
> 
> can you post your openzap.conf.xml and openzap.xml
> and the output of cat /proc/zaptel/*
> 
> Best regards
> Peter
> 
> curly2009 at gmx.de schrieb:
> > Hello,
> >
> > I'm a newbie in FS.
> >
> > I installed and configure Openzap and Zaptel. I have a PRI Digium
> Wildcard TE110P.
> >
> > When I call a number then I get an Error!
> >
> > 2009-01-12 10:20:01 [CRIT] zap_io.c:804 zap_channel_open_any() All
> circuits are busy.
> > 2009-01-12 10:20:01 [ERR] mod_openzap.c:910 channel_outgoing_channel()
> No channels available
> > 2009-01-12 10:20:01 [ERR] switch_ivr_originate.c:926
> switch_ivr_originate() Cannot create outgoing channel of type [openzap] cause:
> [DESTINATION_OUT_OF_ORDER]
> >
> > What's wrong? Do you need any configurations?
> >
> > Thanks!
> > Best Regards, Curly 
> >
> >
> >   
> 
> _______________________________________________
> Freeswitch-users mailing list
> Freeswitch-users at lists.freeswitch.org
> http://lists.freeswitch.org/mailman/listinfo/freeswitch-users
> UNSUBSCRIBE:http://lists.freeswitch.org/mailman/options/freeswitch-users
> http://www.freeswitch.org