[Freeswitch-users] Moved Freeswitch to new subnet.

[Mike Peace]

OK I edited the openzap.conf and the open.conf.xml and added the gateway info from the Wiki for dilaing out through a gateway. Still no love but I also noticed this when starting Freeswitch:

2009-08-26 11:04:53 [CRIT] switch_loadable_module.c:839 switch_loadable_module_load_file() Error Loading module /usr/local/freeswitch/mod/mod_openzap.so
**/usr/local/freeswitch/mod/mod_openzap.so: cannot open shared object file: No such file or directory**


Sure enough the openzap.so is not there, does the fact I used the "wanpipe mode" have anything to do with this ? I have searched the drive and it is not there. 
________________________________________
From: freeswitch-users-bounces at lists.freeswitch.org [freeswitch-users-bounces at lists.freeswitch.org] On Behalf Of Mike Peace [MPeace at edcogroupinc.com]
Sent: Wednesday, August 26, 2009 8:58 AM
To: freeswitch-users at lists.freeswitch.org
Subject: Re: [Freeswitch-users] Moved Freeswitch to new subnet.

I found and edited openzap.cong file, the openzap.conf.xml file is in the correct dir but the only example I can find is for a Euro E1 setup not a US T1. I

I have turned up data T1 circuits for WAN links before but not telco stuff. The provider is Qwest, I’ll have to ask about the NI2 , DMS question.

Mike

From: freeswitch-users-bounces at lists.freeswitch.org [mailto:freeswitch-users-bounces at lists.freeswitch.org] On Behalf Of Michael S Collins
Sent: Wednesday, August 26, 2009 3:02 AM
To: freeswitch-users at lists.freeswitch.org
Subject: Re: [Freeswitch-users] Moved Freeswitch to new subnet.


I have looked at that but I am confused on which files need to be edited. Since I have already installed in Wanpipe mode with the Sangoma card I skipped straight to the Wanpipe section. It mentions setting the [span wanpie PRI_1] etc in the openzap.conf then further down it mentions editing the autoload_configs/openzap.conf.xml with a completely different format of config.

Are these the same file? If not where does the first one mentioned reside?

These are two different files. The openzap.conf file is in the freeswitch/conf directory. It is for configuring OZ to talk to the Sangoma card. The openzap.conf.xml file is for configuring the actual openzap module in FreeSWITCH.

The specs you listed on the T1 you have indicate that it's a PRI. However, you need to know which protocol, like NI2 or DMS. Have you ever done a PRI turn up? Who is the carrier?

-MC
=-=-=-=-=-=-=-=-=-=-=-=-=-=-EDCO Group, Inc.
Phone: (800) 999-3456
Fax:   (800) 999-3551
Web:   http://www.edcogroupinc.com/

Confidentiality Notice:  The information contained in this e-mail message (including any attachments) may contain confidential and privileged information, and is for the sole use of the intended recipient(s).  If you are not the intended recipient, any unauthorized review, use, or disclosure or distribution is strictly prohibited.  If you have received this message in error, please notify the sender by replying to this e-mail message or by telephone at (800) 999-3456 and permanently destroy all copies of the original message (including any attachments), along with any reply, and delete them from your system.