[Freeswitch-users] Freeswitch vs. Asterisk speed on ARM

[Rogelio Perez]

Hi Raymond,

I'm not planning to have more than 10 concurrent calls on this  
devices, but I'm also curious as you about how many calls can it handle.
When I get to that point I will post the test results on this list.

Regards,
Rogelio


On Aug 23, 2009, at 8:23 PM, Raymond Chandler wrote:

> Could you load freeswitch with a couple hundred calls then run the  
> test again.. and do the same to asterisk and see how the numbers  
> stack up then? I'm just curious to see what happens at that point.
>
> -Ray
>
> On Aug 21, 2009, at 3:15 PM, Rogelio Perez wrote:
>
>> Hi Everyone,
>>
>> I'm working on a PBX project for the Sheevaplug ARM based computer,  
>> with the following specs: CPU 1.2 GHz, 512MB DDR2, no FPU.
>> So far I've found a big difference between Freeswitch and Asterisk  
>> performance times.
>> This is a comparison of the time it takes them to perform different  
>> actions:
>>
>> startup Freeswitch:			3 min.
>> startup Asterisk:			2 sec.
>>
>> call extension Freeswitch:	6 sec.
>> call extension Asterisk:		0 sec.
>>
>> shutdown Freeswitch:		6.5 sec
>> shutdown Asterisk:			0 sec.
>>
>> reload config Freeswitch: 	1 sec.
>> reload config Asterisk:		1 sec.
>>
>> Both were built from sources natively (no cross-compiling), and  
>> they use the default startup configurations.
>> I have managed to lower the Freeswitch times by disabling most of  
>> the modules and recompiling, but it is still far away from Asterisk  
>> (i.e. FS startup time 2.5 min).
>>
>> 1. Is there any way to further improve Freeswitch performance for  
>> the ARM architecture?
>> 2. Can this be related to the lack of a FPU (the Sheevalug emulates  
>> the floating point operations).
>> 3. On the startup I see this error repeated many times: [ERR]  
>> switch_core_sqldb.c:95 SQL ERR [database is locked]. Can this be  
>> related?
>>
>> Thanks,
>> Rogelio Perez
>>
>> _______________________________________________
>> FreeSWITCH-users mailing list
>> FreeSWITCH-users at lists.freeswitch.org
>> http://lists.freeswitch.org/mailman/listinfo/freeswitch-users
>> UNSUBSCRIBE:http://lists.freeswitch.org/mailman/options/freeswitch-users
>> http://www.freeswitch.org
>
> _______________________________________________
> FreeSWITCH-users mailing list
> FreeSWITCH-users at lists.freeswitch.org
> http://lists.freeswitch.org/mailman/listinfo/freeswitch-users
> UNSUBSCRIBE:http://lists.freeswitch.org/mailman/options/freeswitch-users
> http://www.freeswitch.org

-------------- next part --------------
An HTML attachment was scrubbed...
URL: http://lists.freeswitch.org/pipermail/freeswitch-users/attachments/20090824/4647d3c4/attachment-0002.html