[Freeswitch-users] need help getting ISDN talking to Cisco 3845
John Wehle
john at feith.com
Tue Apr 7 17:37:20 PDT 2009
Our FreeSWITCH setup has an existing T1 using RBS to talk to a digital
modem pack in a Cisco 3845. I'm interested in changing from RBS to
ISDN. I changed both sides, restart things, and see FreeSWITCH report:
2009-04-07 18:53:15 [ERR] Span:0 Q.921() Failed to establish Q.921 link in 3 retries
2009-04-07 18:54:40 [ERR] Span:0 Q.921() Failed to establish Q.921 link in 3 retries
2009-04-07 18:55:36 [ERR] Span:0 Q.921() Failed to establish Q.921 link in 3 retries
2009-04-07 18:55:45 [NOTICE] Span:0 Q.921() I frame in invalid state ignored
2009-04-07 18:55:46 [NOTICE] Span:0 Q.921() I frame in invalid state ignored
2009-04-07 18:55:47 [NOTICE] Span:0 Q.921() I frame in invalid state ignored
2009-04-07 18:55:48 [NOTICE] Span:0 Q.921() I frame in invalid state ignored
I've attached the configs and Cisco debug below. This is using the
native ISDN support in FreeSWITCH with a Sangoma A104d on FreeBSD 6.4.
I unfortunately don't currently speak ISDN (though I'm starting to pick
up a little as a result of this exercise) ... suggestions / hints regarding
what's going on and how to resolve it would be welcomed.
-- John
------------------------------ wanpipe2.conf -------------------------------
[devices]
wanpipe2 = WAN_AFT_TE1, Comment
[interfaces]
wbg1 = wanpipe2, , TDM_VOICE, Comment
[wanpipe2]
CARD_TYPE = AFT
S514CPU = A
CommPort = PRI
AUTO_PCISLOT = NO
PCISLOT = 5
PCIBUS = 5
FE_MEDIA = T1
FE_LCODE = B8ZS
FE_FRAME = ESF
FE_LINE = 2
TE_CLOCK = MASTER
TE_REF_CLOCK = 1
TE_HIGHIMPEDANCE = NO
TE_RX_SLEVEL = 120
LBO = 0DB
FE_TXTRISTATE = NO
MTU = 1500
UDPPORT = 9000
TTL = 255
IGNORE_FRONT_END = NO
TDMV_SPAN = 2
TDMV_DCHAN = 0
TDMV_HW_DTMF = YES
[wbg1]
ACTIVE_CH = ALL
TDMV_ECHO_OFF = NO
TDMV_HWEC = YES
------------------------------ zaptel.conf ---------------------------------
#Sangoma A104 port 2 [slot:5 bus:5 span:2] <wanpipe2>
span=2,0,0,esf,b8zs
bchan=25-47
dchan=48
------------------------------ openzap.conf --------------------------------
[span zt]
; A104D FE 2 1-6 MICA
name => Cisco Digital Modem
trunk_type => t1
number => 2487
b-channel => 25-47
d-channel => 48
--------------------------- openzap.conf.xml -------------------------------
<pri_spans>
<span id="2">
<!-- Log Levels: none, alert, crit, err, warning, notice, info, debug -->
<param name="q921loglevel" value="info"/>
<param name="q931loglevel" value="info"/>
<param name="mode" value="net"/>
<param name="dialect" value="national"/>
<param name="dialplan" value="XML"/>
<param name="context" value="default"/>
</span>
</pri_spans>
------------------------------ Cisco config --------------------------------
controller T1 1/0
framing ESF
linecode b8zs
cablelength short 220
pri-group timeslots 1-24
interface Serial1/0:23
no ip address
encapsulation hdlc
isdn switch-type primary-ni
isdn incoming-voice modem
isdn calling-number 2487
no cdp enable
------------------------------ Cisco debug ---------------------------------
#show isdn stat
Global ISDN Switchtype = primary-ni
ISDN Serial1/0:23 interface
dsl 0, interface ISDN Switchtype = primary-ni
Layer 1 Status:
ACTIVE
Layer 2 Status:
TEI = 0, Ces = 1, SAPI = 0, State = MULTIPLE_FRAME_ESTABLISHED
Layer 3 Status:
0 Active Layer 3 Call(s)
Active dsl 0 CCBs = 0
The Free Channel Mask: 0x807FFFFF
Number of L2 Discards = 2, L2 Session ID = 117
Total Allocated ISDN CCBs = 0
Apr 7 22:53:44.264: ISDN Se1/0:23 Q921: L2_EstablishDataLink: sending SABME
Apr 7 22:53:44.264: ISDN Se1/0:23 Q921: User TX -> SABMEp sapi=0 tei=0
Apr 7 22:53:44.312: ISDN Se1/0:23 Q921: User RX <- UAf sapi=0 tei=0
Apr 7 22:53:44.312: %CSM-5-PRI: add PRI at 1/0:23 (index 0)
Apr 7 22:53:44.312: %ISDN-6-LAYER2UP: Layer 2 for Interface Se1/0:23, TEI 0 cha
nged to up
Apr 7 22:53:47.268: ISDN Se1/0:23 Q921: User RX <- RRp sapi=0 tei=0 nr=0
Apr 7 22:53:47.268: ISDN Se1/0:23 Q921: User TX -> RRf sapi=0 tei=0 nr=0
prepnet-rt#
Apr 7 22:53:57.336: ISDN Se1/0:23 Q921: User RX <- RRp sapi=0 tei=0 nr=0
Apr 7 22:53:57.336: ISDN Se1/0:23 Q921: User TX -> RRf sapi=0 tei=0 nr=0
prepnet-rt#
Apr 7 22:54:11.692: ISDN Se1/0:23 Q921: User RX <- SABMEp sapi=0 tei=0
Apr 7 22:54:11.692: ISDN Se1/0:23 Q921: User TX -> UAf sapi=0 tei=0
Apr 7 22:54:21.760: ISDN Se1/0:23 Q921: User RX <- RRp sapi=0 tei=0 nr=0
Apr 7 22:54:21.760: ISDN Se1/0:23 Q921: User TX -> RRf sapi=0 tei=0 nr=0
Apr 7 22:54:51.760: ISDN Se1/0:23 Q921: User TX -> RRp sapi=0 tei=0 nr=0
Apr 7 22:54:52.760: ISDN Se1/0:23 Q921: User TX -> RRp sapi=0 tei=0 nr=0
Apr 7 22:54:53.760: ISDN Se1/0:23 Q921: User TX -> RRp sapi=0 tei=0 nr=0
Apr 7 22:54:54.760: ISDN Se1/0:23 Q921: User TX -> RRp sapi=0 tei=0 nr=0
Apr 7 22:54:55.760: ISDN Se1/0:23 Q921: L2_EstablishDataLink: sending SABME
Apr 7 22:54:55.760: ISDN Se1/0:23 Q921: User TX -> SABMEp sapi=0 tei=0
Apr 7 22:54:56.760: ISDN Se1/0:23 Q921: User TX -> SABMEp sapi=0 tei=0
Apr 7 22:54:57.760: ISDN Se1/0:23 Q921: User TX -> SABMEp sapi=0 tei=0
Apr 7 22:54:58.760: ISDN Se1/0:23 Q921: User TX -> SABMEp sapi=0 tei=0
Apr 7 22:54:59.760: %CSM-5-PRI: delete PRI at 1/0:23 (index 0)
Apr 7 22:54:59.760: %ISDN-6-LAYER2DOWN: Layer 2 for Interface Se1/0:23, TEI 0 c
hanged to down
Apr 7 22:54:59.760: ISDN Se1/0:23 Q931: Ux_DLRelInd: DL_REL_IND received from L
2
Apr 7 22:55:04.760: ISDN Se1/0:23 Q921: L2_EstablishDataLink: sending SABME
Apr 7 22:55:04.760: ISDN Se1/0:23 Q921: User TX -> SABMEp sapi=0 tei=0
Apr 7 22:55:05.760: ISDN Se1/0:23 Q921: User TX -> SABMEp sapi=0 tei=0
Apr 7 22:55:05.872: ISDN Se1/0:23 Q921: User RX <- RRp sapi=0 tei=0 nr=0
Apr 7 22:55:06.760: ISDN Se1/0:23 Q921: User TX -> SABMEp sapi=0 tei=0
Apr 7 22:55:07.760: ISDN Se1/0:23 Q921: User TX -> SABMEp sapi=0 tei=0
Apr 7 22:55:08.760: ISDN Se1/0:23 Q931: Ux_DLRelInd: DL_REL_IND received from L
2
Apr 7 22:55:13.760: ISDN Se1/0:23 Q921: L2_EstablishDataLink: sending SABME
Apr 7 22:55:13.760: ISDN Se1/0:23 Q921: User TX -> SABMEp sapi=0 tei=0
Apr 7 22:55:14.760: ISDN Se1/0:23 Q921: User TX -> SABMEp sapi=0 tei=0
Apr 7 22:55:15.760: ISDN Se1/0:23 Q921: User TX -> SABMEp sapi=0 tei=0
Apr 7 22:55:15.772: ISDN Se1/0:23 Q921: User RX <- UAf sapi=0 tei=0
Apr 7 22:55:15.772: %CSM-5-PRI: add PRI at 1/0:23 (index 0)
Apr 7 22:55:15.772: %ISDN-6-LAYER2UP: Layer 2 for Interface Se1/0:23, TEI 0 cha
nged to up
Apr 7 22:55:15.772: ISDN Se1/0:23 Q921: User TX -> INFO sapi=0 tei=0, ns=0 nr=0
Apr 7 22:55:15.772: ISDN Se1/0:23 Q931: RESTART pd = 8 callref = 0x0000
Restart Indicator i = 0x87
Apr 7 22:55:16.772: ISDN Se1/0:23 Q921: S7_T200_EXPIRY: VA = 0, VS = 1
Apr 7 22:55:16.772: ISDN Se1/0:23 Q921: User TX -> INFOp sapi=0 tei=0, ns=0 nr=
0
Apr 7 22:55:16.772: ISDN Se1/0:23 Q931: RESTART pd = 8 callref = 0x0000
Restart Indicator i = 0x87
Apr 7 22:55:17.772: ISDN Se1/0:23 Q921: User TX -> INFOp sapi=0 tei=0, ns=0 nr=
0
Apr 7 22:55:17.772: ISDN Se1/0:23 Q931: RESTART pd = 8 callref = 0x0000
Restart Indicator i = 0x87
Apr 7 22:55:17.784: ISDN Se1/0:23 Q921: User RX <- RRf sapi=0 tei=0 nr=1
Apr 7 22:55:45.773: ISDN Se1/0:23 Q921: User TX -> INFO sapi=0 tei=0, ns=1 nr=0
Apr 7 22:55:45.773: ISDN Se1/0:23 Q931: RESTART pd = 8 callref = 0x0000
Restart Indicator i = 0x87
Apr 7 22:55:46.773: ISDN Se1/0:23 Q921: S7_T200_EXPIRY: VA = 1, VS = 2
Apr 7 22:55:46.773: ISDN Se1/0:23 Q921: User TX -> INFOp sapi=0 tei=0, ns=1 nr=
0
Apr 7 22:55:46.773: ISDN Se1/0:23 Q931: RESTART pd = 8 callref = 0x0000
Restart Indicator i = 0x87
Apr 7 22:55:47.773: ISDN Se1/0:23 Q921: User TX -> INFOp sapi=0 tei=0, ns=1 nr=
0
Apr 7 22:55:47.773: ISDN Se1/0:23 Q931: RESTART pd = 8 callref = 0x0000
Restart Indicator i = 0x87
-------------------------------------------------------------------------
| Feith Systems | Voice: 1-215-646-8000 | Email: john at feith.com |
| John Wehle | Fax: 1-215-540-5495 | |
-------------------------------------------------------------------------
More information about the FreeSWITCH-users
mailing list