[Freeswitch-users] Openzap: Analog FXO disconnect supervision. Is it possible to disconnect on busy? is battery reversal the default? is it power denial?
Anthony Minessale
anthony.minessale at gmail.com
Tue Sep 2 18:34:41 EDT 2008
you just put the tone_detect app right before the bridge app
you might have to also execute pre_answer to get an early media stream up
into FS
On Tue, Sep 2, 2008 at 5:23 PM, Luis F Urrea <lfurrea at gmail.com> wrote:
> Anthony,
>
> So far I haven't been able to used the tone_detect app with hangup when it
> involves a phone ringing, Could you provide an example of a dialplan rule
> that I could test.
>
> TIA
>
>
> On Tue, Sep 2, 2008 at 4:18 PM, Luis F Urrea <lfurrea at gmail.com> wrote:
>
>> I understand that tone based disconnect could be subject to false
>> disconnects in some cases, being dependent on the integrity of the analog
>> signal and the proper configuration of tones, however I do feel that the
>> feature is worth the effort, considering how difficult it is to get a Telco
>> to arrange changes of settings on analog lines and being a last resort for
>> this kind of situation.
>>
>> I do know however that this feature is implemented for example on Cisco
>> IOS for analog gateways, Audiocodes gateways and Patton gateways.
>>
>> Cisco IOS and Patton requires one to specify the frequencies and cadence
>> of the tone, Audiocodes provides an application that records the call
>> progress tones and then analyzes the recorded busy signal to be used as the
>> disconnect signal.
>>
>> I used to work at Cisco TAC supporting H323 analog and digital gateways,
>> and in my experience the feature certainly saved the day in many cases after
>> the customer was frustrated in trying to find out what his/her provider
>> implemented on the line.
>>
>> My vote goes for it!
>>
>>
>>
>> On Tue, Sep 2, 2008 at 1:05 PM, Michael Jerris <mike at jerris.com> wrote:
>>
>>> We do have the following patch almost ready to merge:
>>>
>>> http://jira.freeswitch.org/browse/OPENZAP-3
>>>
>>> it could probably be expanded to work for other tones than dtmf, with
>>> the caveats described by tony.
>>>
>>> Mike
>>>
>>> On Sep 2, 2008, at 2:22 PM, Anthony Minessale wrote:
>>>
>>> > Any method besides the tone based ones are supported by whichever IO
>>> > layer you choose.
>>> > For instance if you are using the zt mod (zaptel) then all the low
>>> > level analog signalling will be generated by zaptel for ground loop
>>> > and kewl start etc.
>>> >
>>> > Tone based hangup detection is a higher level concept that could be
>>> > implemented in the core of openzap but would require constant tone
>>> > detection throughout the call and is susceptible to false positives
>>> > etc.
>>> >
>>> > it's not a common feature where I wrote the code from. I have
>>> > kewlstart lines here and nobody has asked for it and I don't have a
>>> > labbed up example and I only have 2 hands therefore it's not
>>> > implemented.
>>> >
>>> > Like I said using tone_detect in FreeSWITCH with action hangup is
>>> > not any more or less glorious than how the feature would work right
>>> > in openzap so you can use it that way if you want.
>>> >
>>>
>>>
>>> _______________________________________________
>>> Freeswitch-users mailing list
>>> Freeswitch-users at lists.freeswitch.org
>>> http://lists.freeswitch.org/mailman/listinfo/freeswitch-users
>>> UNSUBSCRIBE:http://lists.freeswitch.org/mailman/options/freeswitch-users
>>> http://www.freeswitch.org
>>>
>>
>>
>
> _______________________________________________
> Freeswitch-users mailing list
> Freeswitch-users at lists.freeswitch.org
> http://lists.freeswitch.org/mailman/listinfo/freeswitch-users
> UNSUBSCRIBE:http://lists.freeswitch.org/mailman/options/freeswitch-users
> http://www.freeswitch.org
>
>
--
Anthony Minessale II
FreeSWITCH http://www.freeswitch.org/
ClueCon http://www.cluecon.com/
AIM: anthm
MSN:anthony_minessale at hotmail.com <MSN%3Aanthony_minessale at hotmail.com>
GTALK/JABBER/PAYPAL:anthony.minessale at gmail.com<PAYPAL%3Aanthony.minessale at gmail.com>
IRC: irc.freenode.net #freeswitch
FreeSWITCH Developer Conference
sip:888 at conference.freeswitch.org <sip%3A888 at conference.freeswitch.org>
iax:guest at conference.freeswitch.org/888
googletalk:conf+888 at conference.freeswitch.org<googletalk%3Aconf%2B888 at conference.freeswitch.org>
pstn:213-799-1400
-------------- next part --------------
An HTML attachment was scrubbed...
URL: http://lists.freeswitch.org/pipermail/freeswitch-users/attachments/20080902/644906df/attachment.html
More information about the Freeswitch-users
mailing list