[Freeswitch-users] Openzap: Analog FXO disconnect supervision. Is it possible to disconnect on busy? is battery reversal the default? is it power denial?

Luis F Urrea lfurrea at gmail.com
Tue Sep 2 18:23:15 EDT 2008


Anthony,

So far I haven't been able to used the tone_detect app with hangup when it
involves a phone ringing, Could you provide an example of a dialplan rule
that I could test.

TIA

On Tue, Sep 2, 2008 at 4:18 PM, Luis F Urrea <lfurrea at gmail.com> wrote:

> I understand that tone based disconnect could be subject to false
> disconnects in some cases, being dependent  on the integrity of the analog
> signal and the proper configuration of tones, however I do feel that the
> feature is worth the effort, considering how difficult it is to get a Telco
> to arrange changes of settings on analog lines and being a last resort for
> this kind of situation.
>
> I do know however that this feature is implemented for example on Cisco IOS
> for analog gateways, Audiocodes gateways and Patton gateways.
>
> Cisco IOS and Patton requires one to specify the frequencies and cadence of
> the tone, Audiocodes provides an application that records the call progress
> tones and then analyzes the recorded busy signal to be used as the
> disconnect signal.
>
> I used to work at Cisco TAC supporting H323 analog and digital gateways,
> and in my experience the feature certainly saved the day in many cases after
> the customer was frustrated in trying to find out what his/her provider
> implemented on the line.
>
> My vote goes for it!
>
>
>
> On Tue, Sep 2, 2008 at 1:05 PM, Michael Jerris <mike at jerris.com> wrote:
>
>> We do have the following patch almost ready to merge:
>>
>> http://jira.freeswitch.org/browse/OPENZAP-3
>>
>> it could probably be expanded to work for other tones than dtmf, with
>> the caveats described by tony.
>>
>> Mike
>>
>> On Sep 2, 2008, at 2:22 PM, Anthony Minessale wrote:
>>
>> > Any method besides the tone based ones are supported by whichever IO
>> > layer you choose.
>> > For instance if you are using the zt mod (zaptel) then all the low
>> > level analog signalling will be generated by zaptel for ground loop
>> > and kewl start etc.
>> >
>> > Tone based hangup detection is a higher level concept that could be
>> > implemented in the core of openzap but would require constant tone
>> > detection throughout the call and is susceptible to false positives
>> > etc.
>> >
>> > it's not a common feature where I wrote the code from.  I have
>> > kewlstart lines here and nobody has asked for it and I don't have a
>> > labbed up example and I only have 2 hands therefore it's not
>> > implemented.
>> >
>> > Like I said using tone_detect in FreeSWITCH with action hangup is
>> > not any more or less glorious than how the feature would work right
>> > in openzap so you can use it that way if you want.
>> >
>>
>>
>> _______________________________________________
>> Freeswitch-users mailing list
>> Freeswitch-users at lists.freeswitch.org
>> http://lists.freeswitch.org/mailman/listinfo/freeswitch-users
>> UNSUBSCRIBE:http://lists.freeswitch.org/mailman/options/freeswitch-users
>> http://www.freeswitch.org
>>
>
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: http://lists.freeswitch.org/pipermail/freeswitch-users/attachments/20080902/92a67f1f/attachment.html 


More information about the Freeswitch-users mailing list