[Freeswitch-users] BRI for North American switch types
Anthony Minessale
anthony.minessale at gmail.com
Sat Oct 25 07:34:24 PDT 2008
It would be interesting to be able to support CAPI but there has been no
effort as of yet.
That doesn't mean it's not a good idea, it just takes time and people and
resources.
On Fri, Oct 24, 2008 at 5:48 PM, Kurt Albershardt <kurt at nv.net> wrote:
> Have a number of Atlas 800 and 830 boxes here and use them all the time for
> PRI testing and inteop. No VoIP module for those - just confirmed with
> Adtran to be certain. So yes, we could use an Atlas to convert BRI to PRI,
> but then we need a PRI card/gateway and we are again adding a lot of parts
> and expense to a simple setup.
>
> I see there might be some hope for the Eicon (now Dialogic) boards via CAPI
> <http://www.dialogic.com/support/helpweb/slnxen/asterisk.asp>
> <
> http://www.dialogic.com/products/tdm_boards/system_release_software/Diva_for_Linux.htm
> >
>
> Will FreeSwitch talk to CAPI?
>
>
>
>
>
>
> --On Friday, October 24, 2008 12:53 PM -0500 Ken Rice <
> krice at suspicious.org> wrote:
>
> > Look at Adtran... They have some things in the atlas series that might be
> > more to your liking... However it might be too large
> >
> >
> >> From: Kurt Albershardt <kurt at nv.net>
> >> Reply-To: <freeswitch-users at lists.freeswitch.org>
> >> Date: Fri, 24 Oct 2008 09:41:35 -0700
> >> To: <freeswitch-users at lists.freeswitch.org>
> >> Subject: [Freeswitch-users] BRI for North American switch types
> >>
> >> We've had a lot of problems with echo on POTS lines recently - seems the
> LECs
> >> are busy implementing VoIP backhaul and creating all sorts of weirdness
> in the
> >> local network. BRI solves this (for now) but the only gateway we have
> been
> >> able to find that will handle US BRI lines (switch types NI-1, 5ESS,
> etc.)
> >> has been to use a Cisco 2600 with a BRI WIC card and an external NT-1.
> All of
> >> the commercial BRI gateways we have looked at do not support North
> American
> >> switch types.
> >>
> >> So
> >>
> >> Is there a BRI card out there that supports North American switch types
> and
> >> will work with FreeSwitch?
> >>
> >>
> >> <http://wiki.freeswitch.org/wiki/FreeSwitch_FAQ> says "The q931/q921 in
> >> OpenZAP will not support BRI as it stands today, and it will take quite
> some
> >> work for this to happen. But we have something in the plans for BRI
> sooner
> >> than that."
> >>
> >> Yet <
> http://wiki.freeswitch.org/wiki/Openzap.conf.xml_Examples#Using_with_BRI>
> >> says "dialect can be "q931" for EuroISDN, "national", "dms" or "5ess""
> >>
> >> I'm a tad confused...
> >>
> >>
> >> thanks!
> >>
> >>
> >>
> >>
> >>
> >>
> >> _______________________________________________
> >> Freeswitch-users mailing list
> >> Freeswitch-users at lists.freeswitch.org
> >> http://lists.freeswitch.org/mailman/listinfo/freeswitch-users
> >> UNSUBSCRIBE:
> http://lists.freeswitch.org/mailman/options/freeswitch-users
> >> http://www.freeswitch.org
> >
> >
> >
> > _______________________________________________
> > Freeswitch-users mailing list
> > Freeswitch-users at lists.freeswitch.org
> > http://lists.freeswitch.org/mailman/listinfo/freeswitch-users
> > UNSUBSCRIBE:http://lists.freeswitch.org/mailman/options/freeswitch-users
> > http://www.freeswitch.org
>
>
>
> --
>
>
>
>
>
>
>
> _______________________________________________
> Freeswitch-users mailing list
> Freeswitch-users at lists.freeswitch.org
> http://lists.freeswitch.org/mailman/listinfo/freeswitch-users
> UNSUBSCRIBE:http://lists.freeswitch.org/mailman/options/freeswitch-users
> http://www.freeswitch.org
>
--
Anthony Minessale II
FreeSWITCH http://www.freeswitch.org/
ClueCon http://www.cluecon.com/
AIM: anthm
MSN:anthony_minessale at hotmail.com <MSN%3Aanthony_minessale at hotmail.com>
GTALK/JABBER/PAYPAL:anthony.minessale at gmail.com<PAYPAL%3Aanthony.minessale at gmail.com>
IRC: irc.freenode.net #freeswitch
FreeSWITCH Developer Conference
sip:888 at conference.freeswitch.org <sip%3A888 at conference.freeswitch.org>
iax:guest at conference.freeswitch.org/888
googletalk:conf+888 at conference.freeswitch.org<googletalk%3Aconf%2B888 at conference.freeswitch.org>
pstn:213-799-1400
-------------- next part --------------
An HTML attachment was scrubbed...
URL: http://lists.freeswitch.org/pipermail/freeswitch-users/attachments/20081025/bd0a3dcd/attachment-0002.html
More information about the FreeSWITCH-users
mailing list