[Freeswitch-users] outbound fxo line pooling

Anthony Minessale anthony.minessale at gmail.com
Tue Jul 15 06:47:26 PDT 2008


yes the spans are all logical so you can make as many as you want as long as
they are all the same type of device and in the case of PRI all the channels
in the span must share the same d channel but for analog you can make as
many as you wish including 1 span per channel.


On Tue, Jul 15, 2008 at 3:53 AM, John Wehle <john at feith.com> wrote:

> > a  or A depending on if you want top down.. or bottom up.
>
> Okay, so with OpenZAP I can use either a number to refer to
> a specific port or A to refer to any available port in a span.
> Other than using a number or A (and a) OpenZAP currently has no
> mechanism for defining explicit pools / port ranges.
>
> So to do something like have a four port card setup with inbound
> calls using all four ports and outbound calls using only ports 2 - 4
> would I need to configure the card as two spans with span 1 containing
> port 1, and span 2 containing ports 2 - 4?  Then I route outbound
> calls to span 2 using the A port (aka any available port on span 2)?
>
> -- John
> -------------------------------------------------------------------------
> |   Feith Systems  |   Voice: 1-215-646-8000  |  Email: john at feith.com  |
> |    John Wehle    |     Fax: 1-215-540-5495  |                         |
> -------------------------------------------------------------------------
>
>
> _______________________________________________
> Freeswitch-users mailing list
> Freeswitch-users at lists.freeswitch.org
> http://lists.freeswitch.org/mailman/listinfo/freeswitch-users
> UNSUBSCRIBE:http://lists.freeswitch.org/mailman/options/freeswitch-users
> http://www.freeswitch.org
>



-- 
Anthony Minessale II

FreeSWITCH http://www.freeswitch.org/
ClueCon http://www.cluecon.com/

AIM: anthm
MSN:anthony_minessale at hotmail.com <MSN%3Aanthony_minessale at hotmail.com>
GTALK/JABBER/PAYPAL:anthony.minessale at gmail.com<PAYPAL%3Aanthony.minessale at gmail.com>
IRC: irc.freenode.net #freeswitch

FreeSWITCH Developer Conference
sip:888 at conference.freeswitch.org <sip%3A888 at conference.freeswitch.org>
iax:guest at conference.freeswitch.org/888
googletalk:conf+888 at conference.freeswitch.org<googletalk%3Aconf%2B888 at conference.freeswitch.org>
pstn:213-799-1400
-------------- next part --------------
An HTML attachment was scrubbed...
URL: http://lists.freeswitch.org/pipermail/freeswitch-users/attachments/20080715/3f6e73ca/attachment-0002.html 


More information about the FreeSWITCH-users mailing list