[Freeswitch-users] FreeSwitch using SIP behind a FireWall

[michael mendel]

Hello

Hello

What ports should be opened for RTP For Inbound calls, SIP calls, or maybe
it is allocated dynamically .

Regards,
 Michael Mendel


On 1/3/07, Yossi Neiman <iaxteling at cartissolutions.com> wrote:
>
> You probably do not need to do anything with your firewall to facilitate
> outbound calls.  Inbound calls would need 5060 open and/or routed to the
> proper host behind the firewall, as long as some ports for RTP (I
> *think* the range is somewhere around 8000 udp).
>
> A VPN most likely will avoid this issue assuming that you are not
> firewalling between the vpn endpoints.
>
>
> Yossi Neiman
> Cartis Solutions, Inc. - http://www.cartissolutions.com
>
>
>
> michael mendel wrote:
> > Hello
> >
> > What ports should I open inside my FireWall except 5060 for SIP when
> > my Freeswitch is behind a Firewall or there is a tunnelling and I
> > don't have to open ports for the RTP.
> >
> > Regrads,
> >  Michael Mendel
> >
> > ------------------------------------------------------------------------
> >
> > _______________________________________________
> > Freeswitch-users mailing list
> > Freeswitch-users at lists.freeswitch.org
> > http://lists.freeswitch.org/mailman/listinfo/freeswitch-users
> > UNSUBSCRIBE:http://lists.freeswitch.org/mailman/options/freeswitch-users
> > http://www.freeswitch.org
> >
>
> _______________________________________________
> Freeswitch-users mailing list
> Freeswitch-users at lists.freeswitch.org
> http://lists.freeswitch.org/mailman/listinfo/freeswitch-users
> UNSUBSCRIBE:http://lists.freeswitch.org/mailman/options/freeswitch-users
> http://www.freeswitch.org
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: http://lists.freeswitch.org/pipermail/freeswitch-users/attachments/20070103/e08ac414/attachment-0003.html