[Freeswitch-dev] About the "hardware fax detection" on Sangoma A101, support on Freeswitch or NOT

[sparklezou]

Hi Michael,

Seem there should be on notification from the FreeTDM lib, HW fax detect.

Then Freeswitch could handle the incoming fax via the pre-defined dialplan context. refer to

http://wiki.sangoma.com/wanpipe-linux-asterisk-fax-detect#asterisk-configuration


2013-03-11



sparklezou



发件人：Michael Jerris
发送时间：2013-03-07 22:11
主题：Re: [Freeswitch-dev] About the "hardware fax detection" on Sangoma A101, support on Freeswitch or NOT
收件人："freeswitch-dev"<freeswitch-dev at lists.freeswitch.org>
抄送：

A function to do what? None of the fax dialplan applications are specific to hardware detect that I can think of


On Mar 7, 2013, at 12:58 AM, sparklezou <sparklezou at 163.com> wrote:


Hi Develop Team,

Is there any pre-defined extension name in the dialplan to handle the HW detect fax?

Seems such function implemented in asterisk. review following email.

Thanks!

2013-03-07



sparklezou



发件人：sparklezou
发送时间：2013-02-17 16:34
主题：About the "hardware fax detection" on Sangoma A101, support on Freeswitch or NOT
收件人："freeswitch-users"<freeswitch-users at lists.freeswitch.org>
抄送：

Hi All,

The Sangoma A101 board support "hardware fax detection". It configured in /etc/wanpipe/wanpipe1.conf configureation file.

TDMV_HW_FAX_DETECT = YES # YES: receive fax 1100hz events from hardware

Is there any configuration on the dial plan, if detect the fax, goes to the predefined dial plan context.

something the same in asterisk http://wiki.sangoma.com/wanpipe-linux-asterisk-fax-detect

Thanks!

2013-02-17



sparklezou
-------------- next part --------------
An HTML attachment was scrubbed...
URL: http://lists.freeswitch.org/pipermail/freeswitch-dev/attachments/20130311/b096f06f/attachment.html