[Freeswitch-users] mod_sndfile error called from mod_tts_commandline - [WARNING] mod_sndfile.c:281 Error Opening File
Brian West
brian at freeswitch.com
Thu Mar 4 19:51:53 UTC 2021
$PATH might be a thing? :) Try the full path to the binary?
On Thu, Mar 4, 2021 at 1:36 PM Lewis Bergman <lewis.bergman at gmail.com>
wrote:
> That was exactly it for the record.
> #which text2wave
> # <-- before apt-get install festival
> #which text2wave
> /usr/bin/text2wave
> # echo 'This is an example of using tts_commandline' | text2wave -f
> 8000 > test.wav
> # file test.wav
> test.wav: RIFF (little-endian) data, WAVE audio, Microsoft PCM, 16
> bit, mono 8000 Hz
> # ls -l test.wav
> -rw-r--r-- 1 root root 60208 Mar 4 06:44 test.wav
> And the freeswitch debug log that shows it works:
> EXECUTE [depth=0] sofia/internal/102 at 66.151.243.45
> speak(tts_commandline|text2wave|This is an example of using
> tts_commandline)
> 2021-03-04 06:59:14.305216 [DEBUG] switch_ivr_play_say.c:3023 OPEN TTS
> tts_commandline
> 2021-03-04 06:59:14.305216 [DEBUG] switch_ivr_play_say.c:3033 Raw
> Codec Activated
> 2021-03-04 06:59:14.305216 [DEBUG] mod_tts_commandline.c:160
> Executing: echo 'This is an example of using tts_commandline' |
> text2wave -f 8000 >
> '/tmp/05e71313-2a4d-48ce-a1e9-84600859112f.tmp.wav'
> 2021-03-04 06:59:15.545212 [DEBUG] switch_ivr_play_say.c:2741 Speaking
> text: This is an example of using tts_commandline
> 2021-03-04 06:59:15.545212 [DEBUG] sofia.c:7326 Channel
> sofia/internal/102 at 66.151.243.45 entering state [ready][200]
> 2021-03-04 06:59:15.565210 [DEBUG] switch_rtp.c:7759 Correct audio
> ip/port confirmed.
> 2021-03-04 06:59:19.305225 [DEBUG] switch_ivr_play_say.c:2905 done
> speaking text
>
> Thanks for the help.
> The reason I tried to start with tts_commandine is I have been
> struggling for a couple of weeks to get MRCP to produce something
> useful so I thought I would try something simpler and I could swear
> mod_tts_commandline was listed as a requirement. But it could have
> been on something else as I have been pouring through every document I
> can find to figure this out and I probably got confused.
> Thanks again!
>
> On Tue, Mar 2, 2021 at 6:36 PM mayamatakeshi <mayamatakeshi at gmail.com>
> wrote:
> >
> >
> >
> > On Wed, Mar 3, 2021 at 4:12 AM Lewis Bergman <lewis.bergman at gmail.com>
> wrote:
> >>
> >> Hello all. I am pretty new to Freeswitch and have an experimental
> container
> >> on Proxmox 6.3 Debian 10 to play with. The goal is to get mod_unimrcp
> >> working. To that end, I have mod_tts_commandline (installed from binary
> >> with FusionPBX as part of the default install) listed in
> modules.conf.xml
> >> /etc/freeswitch/autoload_configs/modules.conf.xml
> >> <!-- Speech Recognition / Text to Speech -->
> >> <load module="mod_unimrcp"/>
> >> <load module="mod_tts_commandline"/>
> >> <load module="mod_flite"/>
> >> I have tried it with and without mod_flite enabled.
> >> Mod_tts_commandline refuses to pull a sound file and the debug log
> seems to
> >> blame mod_sndfile. This is using the example from the
> mod_tts_commandline
> >> page
> >> <
> https://freeswitch.org/confluence/display/FREESWITCH/mod_tts_commandline#mod_tts_commandline-Configuringmod_tts_commandline
> >
> >> as dialplan shows following the debug log output below:
> >>
> >> 2021-02-26 15:19:24.713040 [NOTICE] mod_dptools.c:1406 Channel
> >> [sofia/internal/102 at 66.151.243.45] has been answered
> >> 2021-02-26 15:19:24.713040 [DEBUG] switch_channel.c:3865
> (sofia/internal/
> >> 102 at 66.151.243.45) Callstate Change RINGING -> ACTIVE
> >> 2021-02-26 15:19:24.713040 [DEBUG] sofia.c:7326 Channel sofia/internal/
> >> 102 at 66.151.243.45 entering state [completed][200]
> >> EXECUTE [depth=0] sofia/internal/102 at 66.151.243.45
> >> speak(tts_commandline|pico|This is an example of using tts_commandline)
> >> 2021-02-26 15:19:24.713040 [DEBUG] switch_ivr_play_say.c:3023 OPEN TTS
> >> tts_commandline
> >> 2021-02-26 15:19:24.713040 [DEBUG] switch_ivr_play_say.c:3033 Raw Codec
> >> Activated
> >> 2021-02-26 15:19:24.713040 [DEBUG] mod_tts_commandline.c:160 Executing:
> >> echo 'This is an example of using tts_commandline' | text2wave -f 8000 >
> >> '/tmp/0665a30d-2bb8-40fe-b5a6-9625bd58306e.tmp.wav'
> >> 2021-02-26 15:19:25.433013 [WARNING] mod_sndfile.c:281 Error Opening
> File
> >> [/tmp/0665a30d-2bb8-40fe-b5a6-9625bd58306e.tmp.wav] [File contains data
> in
> >> an unknown format.]
> >> 2021-02-26 15:19:25.433013 [ERR] mod_tts_commandline.c:170 Failed to
> open
> >> file: /tmp/0665a30d-2bb8-40fe-b5a6-9625bd58306e.tmp.wav
> >
> >
> > Since your goal is to use mod_unimrcp I think you should not spend your
> time with mod_tts_commandline.
> > Anyway, what do you get when you run these in the bash shell:
> >
> > which text2wave
> > echo 'This is an example of using tts_commandline' | text2wave -f 8000 >
> test.wav
> > file test.wav
> > ls -l test.wav
> >
> > Did you install festival? (text2wave comes with it)
> >
> >
> >
> > _________________________________________________________________________
> >
> > The FreeSWITCH project is sponsored by SignalWire https://signalwire.com
> > Enhance your FreeSWITCH install with disruptive priced SMS and PSTN
> services.
> > Build your next product on our scalable cloud platform.
> >
> > Join our online community to chat in real time
> https://signalwire.community
> >
> > Professional FreeSWITCH Services
> > sales at freeswitch.com
> > https://freeswitch.com
> >
> > Official FreeSWITCH Sites
> > https://freeswitch.com/oss
> > https://freeswitch.org/confluence
> > https://cluecon.com
> >
> > FreeSWITCH-users mailing list
> > FreeSWITCH-users at lists.freeswitch.org
> > http://lists.freeswitch.org/mailman/listinfo/freeswitch-users
> > UNSUBSCRIBE:http://lists.freeswitch.org/mailman/options/freeswitch-users
> > https://freeswitch.com
>
>
>
> --
> Lewis Bergman
> 325-439-0533 Cell
>
> _________________________________________________________________________
>
> The FreeSWITCH project is sponsored by SignalWire https://signalwire.com
> Enhance your FreeSWITCH install with disruptive priced SMS and PSTN
> services.
> Build your next product on our scalable cloud platform.
>
> Join our online community to chat in real time
> https://signalwire.community
>
> Professional FreeSWITCH Services
> sales at freeswitch.com
> https://freeswitch.com
>
> Official FreeSWITCH Sites
> https://freeswitch.com/oss
> https://freeswitch.org/confluence
> https://cluecon.com
>
> FreeSWITCH-users mailing list
> FreeSWITCH-users at lists.freeswitch.org
> http://lists.freeswitch.org/mailman/listinfo/freeswitch-users
> UNSUBSCRIBE:http://lists.freeswitch.org/mailman/options/freeswitch-users
> https://freeswitch.com
--
Brian West | Co-founder and Developer
Need Commercial support? email sales at freeswitch.com
FreeSWITCH Solutions | 17345 Civic Drive #2531 Brookfield, WI 53045
<https://maps.google.com/?q=17345+Civic+Drive+%232531+Brookfield,+WI+53045&entry=gmail&source=g>
Email: brian at freeswitch.com
Mobile: 918-424-9378
Website: https://www.FreeSWITCH.com <https://www.freeswitch.com/>
[image: https://www.facebook.com/signalwireinc?src=email]
<https://www.facebook.com/freeswitch> [image:
https://twitter.com/freeswitch] <https://twitter.com/freeswitch>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.freeswitch.org/pipermail/freeswitch-users/attachments/20210304/3cd41dc2/attachment.html>
More information about the FreeSWITCH-users
mailing list