From dragos at freeswitch.org  Thu Aug  1 09:05:01 2019
From: dragos at freeswitch.org (Dragos Oancea)
Date: Thu, 1 Aug 2019 10:05:01 +0100
Subject: [Freeswitch-users] Transcoding Bandwidth parameters
In-Reply-To: <LNXP123MB2586E388D9DDA15F30E21F7AB4DC0@LNXP123MB2586.GBRP123.PROD.OUTLOOK.COM>
References: <702882b9-123e-4fa0-b72d-326c2c9fa400.e64a0c44-445d-485e-9afa-30daf69f6122.6d84b303-c56a-4023-bc47-0ca13a77e124@emailsignatures365.codetwo.com>
 <LNXP123MB2586E388D9DDA15F30E21F7AB4DC0@LNXP123MB2586.GBRP123.PROD.OUTLOOK.COM>
Message-ID: <CAGvJV4p9zaMkQTmmj=m=Q0R=mNL+mbujbksQgZRmU8ho3H-D=A@mail.gmail.com>

Try to change these in vars.xml:

  <!-- Video Settings -->
  <!-- Setting the max bandwdith -->
  <X-PRE-PROCESS cmd="set" data="rtp_video_max_bandwidth_in=1mb"/>
  <X-PRE-PROCESS cmd="set" data="rtp_video_max_bandwidth_out=1mb"/>



On Wed, Jul 31, 2019 at 1:43 PM Elliot Journeaux <
Elliot.Journeaux at hihi.co.uk> wrote:

> Hi,
>
>
>
> I’ve noticed when transcoding freeswitch sets a default max bandwidth to
> 1mb (b=AS:1024). Why is this? And is this configurable?
>
>
>
> Thanks,
>
> Elliot
> Elliot Journeaux
> UC Engineer
> T 0330 058 0000
> D 01202 592311
> E Elliot.Journeaux at hihi.co.uk [image: 4Com] <http://hihi.co.uk/>
> HiHi.co.uk <http://hihi.co.uk>
> HiHi Ltd
> One Lansdowne Plaza, 24 Christchurch Road, Bournemouth, Dorset BH1 3NE
>
> This message contains confidential information and is intended only for
> the individual named. Our company accepts no liability for the content of
> this email, or for the consequences of any actions taken on the basis of
> the information provided. Please note that any views or opinions presented
> in this email are solely those of the author and do not necessarily
> represent those of the company. If you are not the named addressee you
> should not disseminate, distribute or copy this e-mail. If you are not the
> intended recipient you are notified that disclosing, copying, distributing
> or taking any action in reliance on the contents of this information is
> strictly prohibited. If you have received this email in error please notify
> the system manager or the sender immediately and delete this e-mail from
> your system. E-mail transmission cannot be guaranteed to be secure or
> error-free as information could be intercepted, corrupted, lost, destroyed,
> arrive late or incomplete, or contain viruses. The sender therefore does
> not accept liability for any errors or omissions in the contents of this
> message or any damage caused by any virus, which arise as a result of
> e-mail transmission. The recipient should check this email and any
> attachments for the presence of viruses.
> _________________________________________________________________________
>
> The FreeSWITCH project is sponsored by SignalWire https://signalwire.com
> Enhance your FreeSWITCH install with disruptive priced SMS and PSTN
> services.
> Build your next product on our scalable cloud platform.
>
> Join our online community to chat in real time
> https://signalwire.community
>
> Professional FreeSWITCH Services
> sales at freeswitch.com
> https://freeswitch.com
>
> Official FreeSWITCH Sites
> https://freeswitch.com/oss
> https://freeswitch.org/confluence
> https://cluecon.com
>
> FreeSWITCH-users mailing list
> FreeSWITCH-users at lists.freeswitch.org
> http://lists.freeswitch.org/mailman/listinfo/freeswitch-users
> UNSUBSCRIBE:http://lists.freeswitch.org/mailman/options/freeswitch-users
> https://freeswitch.com
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.freeswitch.org/pipermail/freeswitch-users/attachments/20190801/c5c6d85a/attachment.html>

From ak at hejdu.dk  Thu Aug  1 11:57:47 2019
From: ak at hejdu.dk (Allan Kristensen)
Date: Thu, 1 Aug 2019 13:57:47 +0200
Subject: [Freeswitch-users] Excessive logging?
Message-ID: <CAA4dF93FGSY=07pt-b_HEyKDQ6X+myYovQFqO0epQc9ik=-t-Q@mail.gmail.com>

Hello,

I'm using the master branch to test some things and I've noticed that there
is a lot of these:

2019-08-01 11:50:07.238469 [NOTICE] switch_rtp.c:2191 Sending RTCP SR
(ssrc=3712758684)
2019-08-01 11:50:08.258456 [NOTICE] switch_rtp.c:2191 Sending RTCP SR
(ssrc=3712758684)
2019-08-01 11:50:09.278517 [NOTICE] switch_rtp.c:2191 Sending RTCP SR
(ssrc=3712758684)
2019-08-01 11:50:10.298459 [NOTICE] switch_rtp.c:2191 Sending RTCP SR
(ssrc=3712758684)
2019-08-01 11:50:10.518468 [NOTICE] switch_rtp.c:2191 Sending RTCP SR
(ssrc=156472476)
2019-08-01 11:50:11.318554 [NOTICE] switch_rtp.c:2191 Sending RTCP SR
(ssrc=3712758684)
2019-08-01 11:50:12.338457 [NOTICE] switch_rtp.c:2191 Sending RTCP SR
(ssrc=3712758684)
2019-08-01 11:50:13.358469 [NOTICE] switch_rtp.c:2191 Sending RTCP SR
(ssrc=3712758684)
2019-08-01 11:50:14.378473 [NOTICE] switch_rtp.c:2191 Sending RTCP SR
(ssrc=3712758684)

I can see the log level was changed from SWITCH_LOG_DEBUG1
to SWITCH_LOG_NOTICE in commit
https://freeswitch.org/stash/projects/FS/repos/freeswitch/commits/7906a2054afc93319f502226d5c39a074b67c37d
is
this on purpose?

Thank you...

/Allan
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.freeswitch.org/pipermail/freeswitch-users/attachments/20190801/06f9af79/attachment.html>

From dragos at freeswitch.org  Thu Aug  1 13:27:14 2019
From: dragos at freeswitch.org (Dragos Oancea)
Date: Thu, 1 Aug 2019 14:27:14 +0100
Subject: [Freeswitch-users] Excessive logging?
In-Reply-To: <CAA4dF93FGSY=07pt-b_HEyKDQ6X+myYovQFqO0epQc9ik=-t-Q@mail.gmail.com>
References: <CAA4dF93FGSY=07pt-b_HEyKDQ6X+myYovQFqO0epQc9ik=-t-Q@mail.gmail.com>
Message-ID: <CAGvJV4rOUmvHe-3JhugNGjyMmf8k4cOGZZ6vKJt3_bHLquxbnA@mail.gmail.com>

We just fixed it. Thanks.

On Thu, Aug 1, 2019 at 1:40 PM Allan Kristensen <ak at hejdu.dk> wrote:

> Hello,
>
> I'm using the master branch to test some things and I've noticed that
> there is a lot of these:
>
> 2019-08-01 11:50:07.238469 [NOTICE] switch_rtp.c:2191 Sending RTCP SR
> (ssrc=3712758684)
> 2019-08-01 11:50:08.258456 [NOTICE] switch_rtp.c:2191 Sending RTCP SR
> (ssrc=3712758684)
> 2019-08-01 11:50:09.278517 [NOTICE] switch_rtp.c:2191 Sending RTCP SR
> (ssrc=3712758684)
> 2019-08-01 11:50:10.298459 [NOTICE] switch_rtp.c:2191 Sending RTCP SR
> (ssrc=3712758684)
> 2019-08-01 11:50:10.518468 [NOTICE] switch_rtp.c:2191 Sending RTCP SR
> (ssrc=156472476)
> 2019-08-01 11:50:11.318554 [NOTICE] switch_rtp.c:2191 Sending RTCP SR
> (ssrc=3712758684)
> 2019-08-01 11:50:12.338457 [NOTICE] switch_rtp.c:2191 Sending RTCP SR
> (ssrc=3712758684)
> 2019-08-01 11:50:13.358469 [NOTICE] switch_rtp.c:2191 Sending RTCP SR
> (ssrc=3712758684)
> 2019-08-01 11:50:14.378473 [NOTICE] switch_rtp.c:2191 Sending RTCP SR
> (ssrc=3712758684)
>
> I can see the log level was changed from SWITCH_LOG_DEBUG1
> to SWITCH_LOG_NOTICE in commit
> https://freeswitch.org/stash/projects/FS/repos/freeswitch/commits/7906a2054afc93319f502226d5c39a074b67c37d is
> this on purpose?
>
> Thank you...
>
> /Allan
> _________________________________________________________________________
>
> The FreeSWITCH project is sponsored by SignalWire https://signalwire.com
> Enhance your FreeSWITCH install with disruptive priced SMS and PSTN
> services.
> Build your next product on our scalable cloud platform.
>
> Join our online community to chat in real time
> https://signalwire.community
>
> Professional FreeSWITCH Services
> sales at freeswitch.com
> https://freeswitch.com
>
> Official FreeSWITCH Sites
> https://freeswitch.com/oss
> https://freeswitch.org/confluence
> https://cluecon.com
>
> FreeSWITCH-users mailing list
> FreeSWITCH-users at lists.freeswitch.org
> http://lists.freeswitch.org/mailman/listinfo/freeswitch-users
> UNSUBSCRIBE:http://lists.freeswitch.org/mailman/options/freeswitch-users
> https://freeswitch.com
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.freeswitch.org/pipermail/freeswitch-users/attachments/20190801/cd0fdad8/attachment.html>

From sdevoy at bizfocused.com  Thu Aug  1 18:08:55 2019
From: sdevoy at bizfocused.com (Sean Devoy)
Date: Thu, 1 Aug 2019 18:08:55 +0000
Subject: [Freeswitch-users] SMS  Nobody to send to: Profile internal
Message-ID: <BN6PR0101MB28506BD2FD572E5F8A7AFCEABBDE0@BN6PR0101MB2850.prod.exchangelabs.com>

Hi,
I have a multitenant server that I am trying to get SMS messaging working on.

When I send a text "xxx" from one extension to another I get:

2019-08-01 18:02:56.952248 [WARNING] sofia_presence.c:221 Not sending to local box for 666@[fqdn here]
2019-08-01 18:02:56.952248 [ERR] sofia_presence.c:272 Chat proto [sip]
from ["667" <sip:667@[fqdn here]>;tag=72173e0a]
to [666@[fqdn here]]
xxx
Nobody to send to: Profile internal

Where do I define the profile?  What goes in it?  The FQDN or context maybe?

Thanks,
Sean
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.freeswitch.org/pipermail/freeswitch-users/attachments/20190801/593aca25/attachment.html>

From david.villasmil.work at gmail.com  Thu Aug  1 19:49:01 2019
From: david.villasmil.work at gmail.com (David Villasmil)
Date: Thu, 1 Aug 2019 20:49:01 +0100
Subject: [Freeswitch-users] SMS Nobody to send to: Profile internal
In-Reply-To: <BN6PR0101MB28506BD2FD572E5F8A7AFCEABBDE0@BN6PR0101MB2850.prod.exchangelabs.com>
References: <BN6PR0101MB28506BD2FD572E5F8A7AFCEABBDE0@BN6PR0101MB2850.prod.exchangelabs.com>
Message-ID: <CAFGRPVqzaT6Z89SvxAT5tYC5TbfuFTnFdCm2aEgOOs1PzLr1cA@mail.gmail.com>

Try in the chat dialplan, I can’t remember where it is. Checkout mod_sms

On Thu, 1 Aug 2019 at 19:48, Sean Devoy <sdevoy at bizfocused.com> wrote:

> Hi,
>
> I have a multitenant server that I am trying to get SMS messaging working
> on.
>
>
>
> When I send a text “xxx” from one extension to another I get:
>
>
>
> 2019-08-01 18:02:56.952248 [WARNING] sofia_presence.c:221 Not sending to
> local box for 666@[fqdn here]
>
> 2019-08-01 18:02:56.952248 [ERR] sofia_presence.c:272 Chat proto [sip]
>
> from ["667" <sip:667@[fqdn here]>;tag=72173e0a]
>
> to [666@[fqdn here]]
>
> xxx
>
> Nobody to send to: Profile internal
>
>
>
> Where do I define the profile?  What goes in it?  The FQDN or context
> maybe?
>
>
>
> Thanks,
>
> Sean
> _________________________________________________________________________
>
> The FreeSWITCH project is sponsored by SignalWire https://signalwire.com
> Enhance your FreeSWITCH install with disruptive priced SMS and PSTN
> services.
> Build your next product on our scalable cloud platform.
>
> Join our online community to chat in real time
> https://signalwire.community
>
> Professional FreeSWITCH Services
> sales at freeswitch.com
> https://freeswitch.com
>
> Official FreeSWITCH Sites
> https://freeswitch.com/oss
> https://freeswitch.org/confluence
> https://cluecon.com
>
> FreeSWITCH-users mailing list
> FreeSWITCH-users at lists.freeswitch.org
> http://lists.freeswitch.org/mailman/listinfo/freeswitch-users
> UNSUBSCRIBE:http://lists.freeswitch.org/mailman/options/freeswitch-users
> https://freeswitch.com

-- 
Regards,

David Villasmil
email: david.villasmil.work at gmail.com
phone: +34669448337
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.freeswitch.org/pipermail/freeswitch-users/attachments/20190801/02244d6c/attachment-0001.html>

From sdevoy at bizfocused.com  Thu Aug  1 22:14:18 2019
From: sdevoy at bizfocused.com (Sean Devoy)
Date: Thu, 1 Aug 2019 22:14:18 +0000
Subject: [Freeswitch-users] SMS Nobody to send to: Profile internal
In-Reply-To: <CAFGRPVqzaT6Z89SvxAT5tYC5TbfuFTnFdCm2aEgOOs1PzLr1cA@mail.gmail.com>
References: <BN6PR0101MB28506BD2FD572E5F8A7AFCEABBDE0@BN6PR0101MB2850.prod.exchangelabs.com>
 <CAFGRPVqzaT6Z89SvxAT5tYC5TbfuFTnFdCm2aEgOOs1PzLr1cA@mail.gmail.com>
Message-ID: <BN6PR0101MB28507CF85608F624837510A4BBDE0@BN6PR0101MB2850.prod.exchangelabs.com>

Thanks, I have done both of those already.
I can’t find ANYTHING about profile.

From: FreeSWITCH-users <freeswitch-users-bounces at lists.freeswitch.org> On Behalf Of David Villasmil
Sent: Thursday, August 1, 2019 3:49 PM
To: FreeSWITCH Users Help <freeswitch-users at lists.freeswitch.org>
Subject: Re: [Freeswitch-users] SMS Nobody to send to: Profile internal

Try in the chat dialplan, I can’t remember where it is. Checkout mod_sms

On Thu, 1 Aug 2019 at 19:48, Sean Devoy <sdevoy at bizfocused.com<mailto:sdevoy at bizfocused.com>> wrote:
Hi,
I have a multitenant server that I am trying to get SMS messaging working on.

When I send a text “xxx” from one extension to another I get:

2019-08-01 18:02:56.952248 [WARNING] sofia_presence.c:221 Not sending to local box for 666@[fqdn here]
2019-08-01 18:02:56.952248 [ERR] sofia_presence.c:272 Chat proto [sip]
from ["667" <sip:667@[fqdn here]<sip:667@[fqdn%20here]>>;tag=72173e0a]
to [666@[fqdn here]]
xxx
Nobody to send to: Profile internal

Where do I define the profile?  What goes in it?  The FQDN or context maybe?

Thanks,
Sean
_________________________________________________________________________

The FreeSWITCH project is sponsored by SignalWire https://signalwire.com
Enhance your FreeSWITCH install with disruptive priced SMS and PSTN services.
Build your next product on our scalable cloud platform.

Join our online community to chat in real time https://signalwire.community

Professional FreeSWITCH Services
sales at freeswitch.com<mailto:sales at freeswitch.com>
https://freeswitch.com

Official FreeSWITCH Sites
https://freeswitch.com/oss
https://freeswitch.org/confluence
https://cluecon.com

FreeSWITCH-users mailing list
FreeSWITCH-users at lists.freeswitch.org<mailto:FreeSWITCH-users at lists.freeswitch.org>
http://lists.freeswitch.org/mailman/listinfo/freeswitch-users
UNSUBSCRIBE:http://lists.freeswitch.org/mailman/options/freeswitch-users
https://freeswitch.com
--
Regards,

David Villasmil
email: david.villasmil.work at gmail.com<mailto:david.villasmil.work at gmail.com>
phone: +34669448337
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.freeswitch.org/pipermail/freeswitch-users/attachments/20190801/3507fb83/attachment.html>

From david.villasmil.work at gmail.com  Fri Aug  2 17:44:10 2019
From: david.villasmil.work at gmail.com (David Villasmil)
Date: Fri, 2 Aug 2019 18:44:10 +0100
Subject: [Freeswitch-users] SMS Nobody to send to: Profile internal
In-Reply-To: <BN6PR0101MB28507CF85608F624837510A4BBDE0@BN6PR0101MB2850.prod.exchangelabs.com>
References: <BN6PR0101MB28506BD2FD572E5F8A7AFCEABBDE0@BN6PR0101MB2850.prod.exchangelabs.com>
 <CAFGRPVqzaT6Z89SvxAT5tYC5TbfuFTnFdCm2aEgOOs1PzLr1cA@mail.gmail.com>
 <BN6PR0101MB28507CF85608F624837510A4BBDE0@BN6PR0101MB2850.prod.exchangelabs.com>
Message-ID: <CAFGRPVrx+HzYt8Skgu2KKNxVe1qcq-9+Rw+x-=y7xevNmwwAWw@mail.gmail.com>

I'd say start simple, do:

[image: Screenshot 2019-08-02 at 00.30.58.png]
then send a message and make sure you receive it back.


Regards,

David Villasmil
email: david.villasmil.work at gmail.com
phone: +34669448337


On Fri, Aug 2, 2019 at 12:16 AM Sean Devoy <sdevoy at bizfocused.com> wrote:

> Thanks, I have done both of those already.
>
> I can’t find ANYTHING about profile.
>
>
>
> *From:* FreeSWITCH-users <freeswitch-users-bounces at lists.freeswitch.org> *On
> Behalf Of *David Villasmil
> *Sent:* Thursday, August 1, 2019 3:49 PM
> *To:* FreeSWITCH Users Help <freeswitch-users at lists.freeswitch.org>
> *Subject:* Re: [Freeswitch-users] SMS Nobody to send to: Profile internal
>
>
>
> Try in the chat dialplan, I can’t remember where it is. Checkout mod_sms
>
>
>
> On Thu, 1 Aug 2019 at 19:48, Sean Devoy <sdevoy at bizfocused.com> wrote:
>
> Hi,
>
> I have a multitenant server that I am trying to get SMS messaging working
> on.
>
>
>
> When I send a text “xxx” from one extension to another I get:
>
>
>
> 2019-08-01 18:02:56.952248 [WARNING] sofia_presence.c:221 Not sending to
> local box for 666@[fqdn here]
>
> 2019-08-01 18:02:56.952248 [ERR] sofia_presence.c:272 Chat proto [sip]
>
> from ["667" <sip:667@[fqdn here]>;tag=72173e0a]
>
> to [666@[fqdn here]]
>
> xxx
>
> Nobody to send to: Profile internal
>
>
>
> Where do I define the profile?  What goes in it?  The FQDN or context
> maybe?
>
>
>
> Thanks,
>
> Sean
>
> _________________________________________________________________________
>
> The FreeSWITCH project is sponsored by SignalWire https://signalwire.com
> Enhance your FreeSWITCH install with disruptive priced SMS and PSTN
> services.
> Build your next product on our scalable cloud platform.
>
> Join our online community to chat in real time
> https://signalwire.community
>
> Professional FreeSWITCH Services
> sales at freeswitch.com
> https://freeswitch.com
>
> Official FreeSWITCH Sites
> https://freeswitch.com/oss
> https://freeswitch.org/confluence
> https://cluecon.com
>
> FreeSWITCH-users mailing list
> FreeSWITCH-users at lists.freeswitch.org
> http://lists.freeswitch.org/mailman/listinfo/freeswitch-users
> UNSUBSCRIBE:http://lists.freeswitch.org/mailman/options/freeswitch-users
> https://freeswitch.com
>
> --
>
> Regards,
>
>
>
> David Villasmil
>
> email: david.villasmil.work at gmail.com
>
> phone: +34669448337
> _________________________________________________________________________
>
> The FreeSWITCH project is sponsored by SignalWire https://signalwire.com
> Enhance your FreeSWITCH install with disruptive priced SMS and PSTN
> services.
> Build your next product on our scalable cloud platform.
>
> Join our online community to chat in real time
> https://signalwire.community
>
> Professional FreeSWITCH Services
> sales at freeswitch.com
> https://freeswitch.com
>
> Official FreeSWITCH Sites
> https://freeswitch.com/oss
> https://freeswitch.org/confluence
> https://cluecon.com
>
> FreeSWITCH-users mailing list
> FreeSWITCH-users at lists.freeswitch.org
> http://lists.freeswitch.org/mailman/listinfo/freeswitch-users
> UNSUBSCRIBE:http://lists.freeswitch.org/mailman/options/freeswitch-users
> https://freeswitch.com
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.freeswitch.org/pipermail/freeswitch-users/attachments/20190802/37d35418/attachment-0001.html>
-------------- next part --------------
A non-text attachment was scrubbed...
Name: Screenshot 2019-08-02 at 00.30.58.png
Type: image/png
Size: 41188 bytes
Desc: not available
URL: <http://lists.freeswitch.org/pipermail/freeswitch-users/attachments/20190802/37d35418/attachment-0001.png>

From sdisanti.eteleco at gmail.com  Thu Aug  1 19:28:56 2019
From: sdisanti.eteleco at gmail.com (Sean DiSanti)
Date: Thu, 1 Aug 2019 12:28:56 -0700
Subject: [Freeswitch-users] asr_handle codec = (null)
In-Reply-To: <71bc7eab-cd67-9afc-4c6d-14c0c92dea03@ednt.de>
References: <911d54df-e69f-ea60-b8d1-30ba9e4e9e31@ednt.de>
 <906479ca-ca7c-9473-68b4-47d2e51fa304@ednt.de>
 <a7525445595049538184a0113cc7cdd2@nysolutions.com>
 <71bc7eab-cd67-9afc-4c6d-14c0c92dea03@ednt.de>
Message-ID: <CAANGHxsTmimYsieeWzLL3eB9yLosAQPurf28hDeH4PRPzDh-Eg@mail.gmail.com>

are you limiting those codecs further in your mrcp_profiles?

On Thu, Aug 1, 2019 at 11:45 AM Bernd Krueger-Knauber <bkk at ednt.de> wrote:

> Thanks for your response.
>
> As I have written: the unimrcp guys says everything is fine.
> I use the default stuff:
> <param name="codecs" value="PCMU PCMA L16/96/8000"/>
>
> It should not be a problem.
>
>
> Am 31.07.2019 um 15:31 schrieb Moishe Grunstein:
> > What codecs do you have set in your unimrcp.conf.xml?
> >
> > -----Original Message-----
> > From: FreeSWITCH-users <freeswitch-users-bounces at lists.freeswitch.org>
> On Behalf Of bkk
> > Sent: Monday, July 29, 2019 11:12 AM
> > To: freeswitch-users at lists.freeswitch.org
> > Subject: Re: [Freeswitch-users] asr_handle codec = (null)
> >
> > I'm no step further.
> >
> > Can really no one jump into?
> >
> >
> > _________________________________________________________________________
> >
> > The FreeSWITCH project is sponsored by SignalWire https://signalwire.com
> Enhance your FreeSWITCH install with disruptive priced SMS and PSTN
> services.
> > Build your next product on our scalable cloud platform.
> >
> > Join our online community to chat in real time
> https://signalwire.community
> >
> > Professional FreeSWITCH Services
> > sales at freeswitch.com
> > https://freeswitch.com
> >
> > Official FreeSWITCH Sites
> > https://freeswitch.com/oss
> > https://freeswitch.org/confluence
> > https://cluecon.com
> >
> > FreeSWITCH-users mailing list
> > FreeSWITCH-users at lists.freeswitch.org
> > http://lists.freeswitch.org/mailman/listinfo/freeswitch-users
> > UNSUBSCRIBE:http://lists.freeswitch.org/mailman/options/freeswitch-users
> > https://freeswitch.com
> > _________________________________________________________________________
> >
> > The FreeSWITCH project is sponsored by SignalWire https://signalwire.com
> > Enhance your FreeSWITCH install with disruptive priced SMS and PSTN
> services.
> > Build your next product on our scalable cloud platform.
> >
> > Join our online community to chat in real time
> https://signalwire.community
> >
> > Professional FreeSWITCH Services
> > sales at freeswitch.com
> > https://freeswitch.com
> >
> > Official FreeSWITCH Sites
> > https://freeswitch.com/oss
> > https://freeswitch.org/confluence
> > https://cluecon.com
> >
> > FreeSWITCH-users mailing list
> > FreeSWITCH-users at lists.freeswitch.org
> > http://lists.freeswitch.org/mailman/listinfo/freeswitch-users
> > UNSUBSCRIBE:http://lists.freeswitch.org/mailman/options/freeswitch-users
> > https://freeswitch.com
>
>
>
> _________________________________________________________________________
>
> The FreeSWITCH project is sponsored by SignalWire https://signalwire.com
> Enhance your FreeSWITCH install with disruptive priced SMS and PSTN
> services.
> Build your next product on our scalable cloud platform.
>
> Join our online community to chat in real time
> https://signalwire.community
>
> Professional FreeSWITCH Services
> sales at freeswitch.com
> https://freeswitch.com
>
> Official FreeSWITCH Sites
> https://freeswitch.com/oss
> https://freeswitch.org/confluence
> https://cluecon.com
>
> FreeSWITCH-users mailing list
> FreeSWITCH-users at lists.freeswitch.org
> http://lists.freeswitch.org/mailman/listinfo/freeswitch-users
> UNSUBSCRIBE:http://lists.freeswitch.org/mailman/options/freeswitch-users
> https://freeswitch.com
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.freeswitch.org/pipermail/freeswitch-users/attachments/20190801/e5f3fca1/attachment.html>

From ing.diasdanny at gmail.com  Fri Aug  2 22:14:03 2019
From: ing.diasdanny at gmail.com (Danny Dias)
Date: Fri, 2 Aug 2019 17:14:03 -0500
Subject: [Freeswitch-users] Trying to install Docker Container FS
Message-ID: <CA+d0Ut-QqqQnFH2RHf0XEUNp5u3ooXmsvYwjFTWXLTtW8hX92A@mail.gmail.com>

Hi Community!

Having some weird issues following this guide to install my FS Containers:

https://hub.docker.com/r/bettervoice/freeswitch-container/

I ran the following command to download and run the image:

dadiaspe at srv-lx-containers-fs-01:~$ CID=$(sudo docker run --name freeswitch
-p 5060:5060/tcp -p 5060:5060/udp -p 5080:5080/tcp -p 5080:5080/udp -p
8021:8021/tcp -p 7443:7443/tcp -p 60535-65535:60535-65535/udp -v
/home/debian/freeswitch/conf:/usr/local/freeswitch/conf
bettervoice/freeswitch-container:1.6.6)

It did several Pulls and Downloads, and returned the following message at
the end:

Digest:
sha256:e0db31cd71a7c8ef63be9b20c438bc94f29b73dc147b294a9e1d2b6ce17b2a01
Status: Downloaded newer image for bettervoice/freeswitch-container:1.6.6
.
.
freeswitch is not configured so not starting.
Please review /usr/local/doc/freeswitch/README.Debian
*tail: unrecognized file system type 0x794c7630 for
'/usr/local/freeswitch/log/freeswitch.log'. please report this to
bug-coreutils at gnu.org <bug-coreutils at gnu.org>. reverting to polling*

But the container seems to be running cause i can connect, and "docker ps
-a" reports the container UP:

dadiaspe at srv-lx-containers-fs-01:~$ docker ps -a
CONTAINER ID        IMAGE                                    COMMAND
           CREATED             STATUS                    PORTS


                       NAMES
d70484c9f2cb        bettervoice/freeswitch-container:1.6.6   "/bin/sh -c
'service…"   About an hour ago   Up 56 minutes
0.0.0.0:5060->5060/tcp,
0.0.0.0:5060->5060/udp, 0.0.0.0:5080->5080/tcp, 0.0.0.0:7443->7443/tcp,
0.0.0.0:5080->5080/udp, 0.0.0.0:8021->8021/tcp,
0.0.0.0:60535-65535->60535-65535/udp,
5066/tcp   freeswitch

dadiaspe at srv-lx-containers-fs-01:~$ docker exec -it freeswitch /bin/bash
root at d70484c9f2cb:/usr/src/freeswitch#

FS appears to be running:

root at d70484c9f2cb:/usr/src/freeswitch# ps -aux | grep free
root          1  0.0  0.0   4444   620 ?        Ss   21:07   0:00 /bin/sh
-c service snmpd start && service freeswitch start && tail -f
/usr/local/freeswitch/log/freeswitch.log
root         21  0.0  0.0   4380   800 ?        S    21:07   0:00 tail -f
/usr/local/freeswitch/log/freeswitch.log
root         71  0.0  0.0   8864   884 pts/0    S+   22:07   0:00 grep
--color=auto free

But can't connect to fs_cli:
root at d70484c9f2cb:/usr/src/freeswitch# /usr/local/freeswitch/bin/fs_cli
*[ERROR] fs_cli.c:1659 main() Error Connecting [Socket Connection Error]*

Am i doing something wrong with the container? I'm planning to run around 4
FS containers in this Host...any ideas/recommendations highly appreciated!

Thank u
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.freeswitch.org/pipermail/freeswitch-users/attachments/20190802/39c37ab8/attachment.html>

From morbidus at rx900.org  Fri Aug  2 13:51:12 2019
From: morbidus at rx900.org (morbidus at rx900.org)
Date: Fri, 2 Aug 2019 15:51:12 +0200
Subject: [Freeswitch-users] hangup cause / sip cause ?
Message-ID: <20190802155112.2fb57fe2@linux>

Hi i've wrote some dialplans for billing with this great engine which is freeswitch
and i'm also using limits and failover ('manually', without the lcr module).

Everything works ok and i'm impressed by its stability and performance !

But i'm unable to get a 'final' termination cause for the calls as i'm used to get with asterisk:
i'd like to have something like 'answered', 'cancel', 'busy', 'congestion', 'chanunavail', and so on

so i'm writing last_bridge_hangup_cause, bridge_hangup_cause and hangup_cause in my cdr
and in particular when the call goes thru the second or third trunk (when using failover)
i get 'NORMAL_TEMPORARY_FAILURE', 'NORMAL_TEMPORARY_FAILURE', 'NORMAL_CLEARING'
and i don't know which one of the three is the actual termination cause :)

what are you guys using to get 'consistent' tc ?

From keith at rhizomatica.org  Sat Aug  3 15:51:37 2019
From: keith at rhizomatica.org (Keith)
Date: Sat, 3 Aug 2019 17:51:37 +0200
Subject: [Freeswitch-users] dialplan continues with bypass_media
Message-ID: <64398323-d529-6414-77ca-209a16b90ae5@rhizomatica.org>


I have a mod_python dialplan and have been experimenting with taking
FreeSwitch out of the media path when the call answers.

It's working great now, and scheduled playback, hangup works brilliantly!

However, I noticed that when I set channel variable bypass_media or
bypass_media_after_bridge then the dialplan continues as soon as the
media is bypassed.

I am doing some things in the dialplan after the bridge, like playing
audio depending on the hang-up cause, but also some logging of call
timings after the bridge.

see: https://github.com/Rhizomatica/rccn/blob/master/rccn/context.py#L258

I was surprised to see that code running when I set
bypass_media_after_bridge on the channel, but maybe my logic is wrong
here, and I should just return after session.execute('bridge') when
originate_disposition is SUCCESS and handle the logging in the hangup hook?

All the same, I was wondering if there was any way to not have the
bridge return after media is bypassed? I've scoured the docs and had a
look through the source code and I think the answer is no, but I thought
I'd ask.

I'm also interested as to the logic of why then the bridge function does
not return on SUCCESS if one is not bypassing media.

Thanks!

Keith.





From keith at rhizomatica.org  Sat Aug  3 16:36:24 2019
From: keith at rhizomatica.org (Keith)
Date: Sat, 3 Aug 2019 18:36:24 +0200
Subject: [Freeswitch-users] hangup cause / sip cause ?
In-Reply-To: <20190802155112.2fb57fe2@linux>
References: <20190802155112.2fb57fe2@linux>
Message-ID: <fb758d55-ce23-315c-e946-328223c3e948@rhizomatica.org>


On 02/08/2019 15:51, morbidus at rx900.org wrote:
> Hi i've wrote some dialplans for billing 

Hi!

What are you writing the dialplans in?

Are you doing billing in a hangup hook?

I've noticed that when I bridge to two EPs, right after the bridge, (in
my python dialplan)

last_bridge_hangup_cause has the hup  cause of the first EP, (that failed)

while in the hangup hook, last_bridge_hangup_cause has the "correct"
value, that is to say, the one from the EP that connected.

Hope it helps.

k/




From s.safarov at gmail.com  Sat Aug  3 17:45:17 2019
From: s.safarov at gmail.com (Sergey Safarov)
Date: Sat, 3 Aug 2019 20:45:17 +0300
Subject: [Freeswitch-users] Trying to install Docker Container FS
In-Reply-To: <CA+d0Ut-QqqQnFH2RHf0XEUNp5u3ooXmsvYwjFTWXLTtW8hX92A@mail.gmail.com>
References: <CA+d0Ut-QqqQnFH2RHf0XEUNp5u3ooXmsvYwjFTWXLTtW8hX92A@mail.gmail.com>
Message-ID: <CAHtxdDfX6cRBDRWskqj1OSBOB4WYK8vGsRhk8aX7b16m+Gon8w@mail.gmail.com>

you can try "docker run -t safarov/freeswitch:1.8.5"
Supported environment vars you can find
https://cloud.docker.com/u/safarov/repository/docker/safarov/freeswitch


On Sat, Aug 3, 2019 at 6:40 PM Danny Dias <ing.diasdanny at gmail.com> wrote:

> Hi Community!
>
> Having some weird issues following this guide to install my FS Containers:
>
> https://hub.docker.com/r/bettervoice/freeswitch-container/
>
> I ran the following command to download and run the image:
>
> dadiaspe at srv-lx-containers-fs-01:~$ CID=$(sudo docker run --name
> freeswitch -p 5060:5060/tcp -p 5060:5060/udp -p 5080:5080/tcp -p
> 5080:5080/udp -p 8021:8021/tcp -p 7443:7443/tcp -p
> 60535-65535:60535-65535/udp -v
> /home/debian/freeswitch/conf:/usr/local/freeswitch/conf
> bettervoice/freeswitch-container:1.6.6)
>
> It did several Pulls and Downloads, and returned the following message at
> the end:
>
> Digest:
> sha256:e0db31cd71a7c8ef63be9b20c438bc94f29b73dc147b294a9e1d2b6ce17b2a01
> Status: Downloaded newer image for bettervoice/freeswitch-container:1.6.6
> .
> .
> freeswitch is not configured so not starting.
> Please review /usr/local/doc/freeswitch/README.Debian
> *tail: unrecognized file system type 0x794c7630 for
> '/usr/local/freeswitch/log/freeswitch.log'. please report this to
> bug-coreutils at gnu.org <bug-coreutils at gnu.org>. reverting to polling*
>
> But the container seems to be running cause i can connect, and "docker ps
> -a" reports the container UP:
>
> dadiaspe at srv-lx-containers-fs-01:~$ docker ps -a
> CONTAINER ID        IMAGE                                    COMMAND
>            CREATED             STATUS                    PORTS
>
>
>                        NAMES
> d70484c9f2cb        bettervoice/freeswitch-container:1.6.6   "/bin/sh -c
> 'service…"   About an hour ago   Up 56 minutes             0.0.0.0:5060->5060/tcp,
> 0.0.0.0:5060->5060/udp, 0.0.0.0:5080->5080/tcp, 0.0.0.0:7443->7443/tcp,
> 0.0.0.0:5080->5080/udp, 0.0.0.0:8021->8021/tcp, 0.0.0.0:60535-65535->60535-65535/udp,
> 5066/tcp   freeswitch
>
> dadiaspe at srv-lx-containers-fs-01:~$ docker exec -it freeswitch /bin/bash
> root at d70484c9f2cb:/usr/src/freeswitch#
>
> FS appears to be running:
>
> root at d70484c9f2cb:/usr/src/freeswitch# ps -aux | grep free
> root          1  0.0  0.0   4444   620 ?        Ss   21:07   0:00 /bin/sh
> -c service snmpd start && service freeswitch start && tail -f
> /usr/local/freeswitch/log/freeswitch.log
> root         21  0.0  0.0   4380   800 ?        S    21:07   0:00 tail -f
> /usr/local/freeswitch/log/freeswitch.log
> root         71  0.0  0.0   8864   884 pts/0    S+   22:07   0:00 grep
> --color=auto free
>
> But can't connect to fs_cli:
> root at d70484c9f2cb:/usr/src/freeswitch# /usr/local/freeswitch/bin/fs_cli
> *[ERROR] fs_cli.c:1659 main() Error Connecting [Socket Connection Error]*
>
> Am i doing something wrong with the container? I'm planning to run around
> 4 FS containers in this Host...any ideas/recommendations highly appreciated!
>
> Thank u
>
>
>
> _________________________________________________________________________
>
> The FreeSWITCH project is sponsored by SignalWire https://signalwire.com
> Enhance your FreeSWITCH install with disruptive priced SMS and PSTN
> services.
> Build your next product on our scalable cloud platform.
>
> Join our online community to chat in real time
> https://signalwire.community
>
> Professional FreeSWITCH Services
> sales at freeswitch.com
> https://freeswitch.com
>
> Official FreeSWITCH Sites
> https://freeswitch.com/oss
> https://freeswitch.org/confluence
> https://cluecon.com
>
> FreeSWITCH-users mailing list
> FreeSWITCH-users at lists.freeswitch.org
> http://lists.freeswitch.org/mailman/listinfo/freeswitch-users
> UNSUBSCRIBE:http://lists.freeswitch.org/mailman/options/freeswitch-users
> https://freeswitch.com
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.freeswitch.org/pipermail/freeswitch-users/attachments/20190803/aee504c3/attachment-0001.html>

From keith at rhizomatica.org  Sat Aug  3 18:49:49 2019
From: keith at rhizomatica.org (Keith)
Date: Sat, 3 Aug 2019 20:49:49 +0200
Subject: [Freeswitch-users] hangup cause / sip cause ?
In-Reply-To: <20190802155112.2fb57fe2@linux>
References: <20190802155112.2fb57fe2@linux>
Message-ID: <aa216da2-3a36-0f8c-b686-a25eb9552628@rhizomatica.org>


On 02/08/2019 15:51, morbidus at rx900.org wrote:
> But i'm unable to get a 'final' termination cause for the calls as i'm used to get with asterisk:
> i'd like to have something like 'answered', 'cancel', 'busy', 'congestion', 'chanunavail', and so on

Can you also check whether originate_disposition, (and maybe
endpoint_disposition) contain the info you want?


> so i'm writing last_bridge_hangup_cause, bridge_hangup_cause and hangup_cause in my cdr

I'm wondering now. Is last_bridge_hangup_cause in the CDR  the "correct"
one, verified by your knowledge of what actually happened?

You /could/ run a hangup hook from XML dialplan, but I think you need to
run some lua, could be inline lua.. but you can print the value of a
variable and check it against what you are seeing in your CDR?

something along the lines of:
https://lists.freeswitch.org/pipermail/freeswitch-users/2011-August/075103.html




From sdevoy at bizfocused.com  Mon Aug  5 17:09:40 2019
From: sdevoy at bizfocused.com (Sean Devoy)
Date: Mon, 5 Aug 2019 17:09:40 +0000
Subject: [Freeswitch-users] SMS Nobody to send to: Profile internal
In-Reply-To: <CAFGRPVrx+HzYt8Skgu2KKNxVe1qcq-9+Rw+x-=y7xevNmwwAWw@mail.gmail.com>
References: <BN6PR0101MB28506BD2FD572E5F8A7AFCEABBDE0@BN6PR0101MB2850.prod.exchangelabs.com>
 <CAFGRPVqzaT6Z89SvxAT5tYC5TbfuFTnFdCm2aEgOOs1PzLr1cA@mail.gmail.com>
 <BN6PR0101MB28507CF85608F624837510A4BBDE0@BN6PR0101MB2850.prod.exchangelabs.com>
 <CAFGRPVrx+HzYt8Skgu2KKNxVe1qcq-9+Rw+x-=y7xevNmwwAWw@mail.gmail.com>
Message-ID: <BN6PR0101MB2850127C8422340A3020FF30BBDA0@BN6PR0101MB2850.prod.exchangelabs.com>

I did this first, exactly as shown and got the same message.

I saw a message somewhere that I need to “alias” something, but I do not understand what to do.

I am on Multitenant and I expect that is part of the issue.  How do I define the domain in a chat plan and on the phone?  Clearly it is registered under its domain.

From: FreeSWITCH-users <freeswitch-users-bounces at lists.freeswitch.org> On Behalf Of David Villasmil
Sent: Friday, August 2, 2019 1:44 PM
To: FreeSWITCH Users Help <freeswitch-users at lists.freeswitch.org>
Subject: Re: [Freeswitch-users] SMS Nobody to send to: Profile internal

I'd say start simple, do:

[Screenshot 2019-08-02 at 00.30.58.png]
then send a message and make sure you receive it back.


Regards,

David Villasmil
email: david.villasmil.work at gmail.com<mailto:david.villasmil.work at gmail.com>
phone: +34669448337


On Fri, Aug 2, 2019 at 12:16 AM Sean Devoy <sdevoy at bizfocused.com<mailto:sdevoy at bizfocused.com>> wrote:
Thanks, I have done both of those already.
I can’t find ANYTHING about profile.

From: FreeSWITCH-users <freeswitch-users-bounces at lists.freeswitch.org<mailto:freeswitch-users-bounces at lists.freeswitch.org>> On Behalf Of David Villasmil
Sent: Thursday, August 1, 2019 3:49 PM
To: FreeSWITCH Users Help <freeswitch-users at lists.freeswitch.org<mailto:freeswitch-users at lists.freeswitch.org>>
Subject: Re: [Freeswitch-users] SMS Nobody to send to: Profile internal

Try in the chat dialplan, I can’t remember where it is. Checkout mod_sms

On Thu, 1 Aug 2019 at 19:48, Sean Devoy <sdevoy at bizfocused.com<mailto:sdevoy at bizfocused.com>> wrote:
Hi,
I have a multitenant server that I am trying to get SMS messaging working on.

When I send a text “xxx” from one extension to another I get:

2019-08-01 18:02:56.952248 [WARNING] sofia_presence.c:221 Not sending to local box for 666@[fqdn here]
2019-08-01 18:02:56.952248 [ERR] sofia_presence.c:272 Chat proto [sip]
from ["667" <sip:667@[fqdn here]<sip:667@[fqdn%20here]>>;tag=72173e0a]
to [666@[fqdn here]]
xxx
Nobody to send to: Profile internal

Where do I define the profile?  What goes in it?  The FQDN or context maybe?

Thanks,
Sean
_________________________________________________________________________

The FreeSWITCH project is sponsored by SignalWire https://signalwire.com
Enhance your FreeSWITCH install with disruptive priced SMS and PSTN services.
Build your next product on our scalable cloud platform.

Join our online community to chat in real time https://signalwire.community

Professional FreeSWITCH Services
sales at freeswitch.com<mailto:sales at freeswitch.com>
https://freeswitch.com

Official FreeSWITCH Sites
https://freeswitch.com/oss
https://freeswitch.org/confluence
https://cluecon.com

FreeSWITCH-users mailing list
FreeSWITCH-users at lists.freeswitch.org<mailto:FreeSWITCH-users at lists.freeswitch.org>
http://lists.freeswitch.org/mailman/listinfo/freeswitch-users
UNSUBSCRIBE:http://lists.freeswitch.org/mailman/options/freeswitch-users
https://freeswitch.com
--
Regards,

David Villasmil
email: david.villasmil.work at gmail.com<mailto:david.villasmil.work at gmail.com>
phone: +34669448337
_________________________________________________________________________

The FreeSWITCH project is sponsored by SignalWire https://signalwire.com
Enhance your FreeSWITCH install with disruptive priced SMS and PSTN services.
Build your next product on our scalable cloud platform.

Join our online community to chat in real time https://signalwire.community

Professional FreeSWITCH Services
sales at freeswitch.com<mailto:sales at freeswitch.com>
https://freeswitch.com

Official FreeSWITCH Sites
https://freeswitch.com/oss
https://freeswitch.org/confluence
https://cluecon.com

FreeSWITCH-users mailing list
FreeSWITCH-users at lists.freeswitch.org<mailto:FreeSWITCH-users at lists.freeswitch.org>
http://lists.freeswitch.org/mailman/listinfo/freeswitch-users
UNSUBSCRIBE:http://lists.freeswitch.org/mailman/options/freeswitch-users
https://freeswitch.com
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.freeswitch.org/pipermail/freeswitch-users/attachments/20190805/3464dd0d/attachment-0001.html>
-------------- next part --------------
A non-text attachment was scrubbed...
Name: image002.png
Type: image/png
Size: 49405 bytes
Desc: image002.png
URL: <http://lists.freeswitch.org/pipermail/freeswitch-users/attachments/20190805/3464dd0d/attachment-0001.png>

From david.villasmil.work at gmail.com  Mon Aug  5 18:36:09 2019
From: david.villasmil.work at gmail.com (David Villasmil)
Date: Mon, 5 Aug 2019 19:36:09 +0100
Subject: [Freeswitch-users] SMS Nobody to send to: Profile internal
In-Reply-To: <BN6PR0101MB2850127C8422340A3020FF30BBDA0@BN6PR0101MB2850.prod.exchangelabs.com>
References: <BN6PR0101MB28506BD2FD572E5F8A7AFCEABBDE0@BN6PR0101MB2850.prod.exchangelabs.com>
 <CAFGRPVqzaT6Z89SvxAT5tYC5TbfuFTnFdCm2aEgOOs1PzLr1cA@mail.gmail.com>
 <BN6PR0101MB28507CF85608F624837510A4BBDE0@BN6PR0101MB2850.prod.exchangelabs.com>
 <CAFGRPVrx+HzYt8Skgu2KKNxVe1qcq-9+Rw+x-=y7xevNmwwAWw@mail.gmail.com>
 <BN6PR0101MB2850127C8422340A3020FF30BBDA0@BN6PR0101MB2850.prod.exchangelabs.com>
Message-ID: <CAFGRPVpVXmEjEP7_iPs3e0Ug8ThLmiYi_f_mVN42H4JPvGx8-g@mail.gmail.com>

I tan into this very same issue and ended up switching to Kamailio :)

Let me see if I can find my old notes

On Mon, 5 Aug 2019 at 18:45, Sean Devoy <sdevoy at bizfocused.com> wrote:

> I did this first, exactly as shown and got the same message.
>
>
>
> I saw a message somewhere that I need to “alias” something, but I do not
> understand what to do.
>
>
>
> I am on Multitenant and I expect that is part of the issue.  How do I
> define the domain in a chat plan and on the phone?  Clearly it is
> registered under its domain.
>
>
>
> *From:* FreeSWITCH-users <freeswitch-users-bounces at lists.freeswitch.org> *On
> Behalf Of *David Villasmil
> *Sent:* Friday, August 2, 2019 1:44 PM
> *To:* FreeSWITCH Users Help <freeswitch-users at lists.freeswitch.org>
> *Subject:* Re: [Freeswitch-users] SMS Nobody to send to: Profile internal
>
>
>
> I'd say start simple, do:
>
>
>
> [image: Screenshot 2019-08-02 at 00.30.58.png]
>
> then send a message and make sure you receive it back.
>
>
>
>
> Regards,
>
>
>
> David Villasmil
>
> email: david.villasmil.work at gmail.com
>
> phone: +34669448337
>
>
>
>
>
> On Fri, Aug 2, 2019 at 12:16 AM Sean Devoy <sdevoy at bizfocused.com> wrote:
>
> Thanks, I have done both of those already.
>
> I can’t find ANYTHING about profile.
>
>
>
> *From:* FreeSWITCH-users <freeswitch-users-bounces at lists.freeswitch.org> *On
> Behalf Of *David Villasmil
> *Sent:* Thursday, August 1, 2019 3:49 PM
> *To:* FreeSWITCH Users Help <freeswitch-users at lists.freeswitch.org>
> *Subject:* Re: [Freeswitch-users] SMS Nobody to send to: Profile internal
>
>
>
> Try in the chat dialplan, I can’t remember where it is. Checkout mod_sms
>
>
>
> On Thu, 1 Aug 2019 at 19:48, Sean Devoy <sdevoy at bizfocused.com> wrote:
>
> Hi,
>
> I have a multitenant server that I am trying to get SMS messaging working
> on.
>
>
>
> When I send a text “xxx” from one extension to another I get:
>
>
>
> 2019-08-01 18:02:56.952248 [WARNING] sofia_presence.c:221 Not sending to
> local box for 666@[fqdn here]
>
> 2019-08-01 18:02:56.952248 [ERR] sofia_presence.c:272 Chat proto [sip]
>
> from ["667" <sip:667@[fqdn here]>;tag=72173e0a]
>
> to [666@[fqdn here]]
>
> xxx
>
> Nobody to send to: Profile internal
>
>
>
> Where do I define the profile?  What goes in it?  The FQDN or context
> maybe?
>
>
>
> Thanks,
>
> Sean
>
> _________________________________________________________________________
>
> The FreeSWITCH project is sponsored by SignalWire https://signalwire.com
> Enhance your FreeSWITCH install with disruptive priced SMS and PSTN
> services.
> Build your next product on our scalable cloud platform.
>
> Join our online community to chat in real time
> https://signalwire.community
>
> Professional FreeSWITCH Services
> sales at freeswitch.com
> https://freeswitch.com
>
> Official FreeSWITCH Sites
> https://freeswitch.com/oss
> https://freeswitch.org/confluence
> https://cluecon.com
>
> FreeSWITCH-users mailing list
> FreeSWITCH-users at lists.freeswitch.org
> http://lists.freeswitch.org/mailman/listinfo/freeswitch-users
> UNSUBSCRIBE:http://lists.freeswitch.org/mailman/options/freeswitch-users
> https://freeswitch.com
>
> --
>
> Regards,
>
>
>
> David Villasmil
>
> email: david.villasmil.work at gmail.com
>
> phone: +34669448337
>
> _________________________________________________________________________
>
> The FreeSWITCH project is sponsored by SignalWire https://signalwire.com
> Enhance your FreeSWITCH install with disruptive priced SMS and PSTN
> services.
> Build your next product on our scalable cloud platform.
>
> Join our online community to chat in real time
> https://signalwire.community
>
> Professional FreeSWITCH Services
> sales at freeswitch.com
> https://freeswitch.com
>
> Official FreeSWITCH Sites
> https://freeswitch.com/oss
> https://freeswitch.org/confluence
> https://cluecon.com
>
> FreeSWITCH-users mailing list
> FreeSWITCH-users at lists.freeswitch.org
> http://lists.freeswitch.org/mailman/listinfo/freeswitch-users
> UNSUBSCRIBE:http://lists.freeswitch.org/mailman/options/freeswitch-users
> https://freeswitch.com
>
> _________________________________________________________________________
>
> The FreeSWITCH project is sponsored by SignalWire https://signalwire.com
> Enhance your FreeSWITCH install with disruptive priced SMS and PSTN
> services.
> Build your next product on our scalable cloud platform.
>
> Join our online community to chat in real time
> https://signalwire.community
>
> Professional FreeSWITCH Services
> sales at freeswitch.com
> https://freeswitch.com
>
> Official FreeSWITCH Sites
> https://freeswitch.com/oss
> https://freeswitch.org/confluence
> https://cluecon.com
>
> FreeSWITCH-users mailing list
> FreeSWITCH-users at lists.freeswitch.org
> http://lists.freeswitch.org/mailman/listinfo/freeswitch-users
> UNSUBSCRIBE:http://lists.freeswitch.org/mailman/options/freeswitch-users
> https://freeswitch.com

-- 
Regards,

David Villasmil
email: david.villasmil.work at gmail.com
phone: +34669448337
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.freeswitch.org/pipermail/freeswitch-users/attachments/20190805/9c6f2c55/attachment-0001.html>
-------------- next part --------------
A non-text attachment was scrubbed...
Name: image002.png
Type: image/png
Size: 49405 bytes
Desc: not available
URL: <http://lists.freeswitch.org/pipermail/freeswitch-users/attachments/20190805/9c6f2c55/attachment-0001.png>

From sdevoy at bizfocused.com  Wed Aug  7 20:50:49 2019
From: sdevoy at bizfocused.com (Sean Devoy)
Date: Wed, 7 Aug 2019 20:50:49 +0000
Subject: [Freeswitch-users] SMS Nobody to send to: Profile internal
In-Reply-To: <CAFGRPVpVXmEjEP7_iPs3e0Ug8ThLmiYi_f_mVN42H4JPvGx8-g@mail.gmail.com>
References: <BN6PR0101MB28506BD2FD572E5F8A7AFCEABBDE0@BN6PR0101MB2850.prod.exchangelabs.com>
 <CAFGRPVqzaT6Z89SvxAT5tYC5TbfuFTnFdCm2aEgOOs1PzLr1cA@mail.gmail.com>
 <BN6PR0101MB28507CF85608F624837510A4BBDE0@BN6PR0101MB2850.prod.exchangelabs.com>
 <CAFGRPVrx+HzYt8Skgu2KKNxVe1qcq-9+Rw+x-=y7xevNmwwAWw@mail.gmail.com>
 <BN6PR0101MB2850127C8422340A3020FF30BBDA0@BN6PR0101MB2850.prod.exchangelabs.com>
 <CAFGRPVpVXmEjEP7_iPs3e0Ug8ThLmiYi_f_mVN42H4JPvGx8-g@mail.gmail.com>
Message-ID: <BN6PR0101MB2850030C2C87C1FE5B963B16BBD40@BN6PR0101MB2850.prod.exchangelabs.com>

I found this thread from 2013 that identified the issue as the sip-force-contact parameter.
http://freeswitch-users.2379917.n2.nabble.com/IM-messaging-on-FreeSwitch-td7588347.html

I removed the NDLB parameter and I get back "Hello, you said:" but the ${body} part is not coming through.

Any ideas?

From: FreeSWITCH-users <freeswitch-users-bounces at lists.freeswitch.org> On Behalf Of David Villasmil
Sent: Monday, August 5, 2019 2:36 PM
To: FreeSWITCH Users Help <freeswitch-users at lists.freeswitch.org>
Subject: Re: [Freeswitch-users] SMS Nobody to send to: Profile internal

I tan into this very same issue and ended up switching to Kamailio :)

Let me see if I can find my old notes

On Mon, 5 Aug 2019 at 18:45, Sean Devoy <mailto:sdevoy at bizfocused.com> wrote:
I did this first, exactly as shown and got the same message.
 
I saw a message somewhere that I need to “alias” something, but I do not understand what to do.
 
I am on Multitenant and I expect that is part of the issue.  How do I define the domain in a chat plan and on the phone?  Clearly it is registered under its domain.
 
From: FreeSWITCH-users <mailto:freeswitch-users-bounces at lists.freeswitch.org> On Behalf Of David Villasmil
Sent: Friday, August 2, 2019 1:44 PM
To: FreeSWITCH Users Help <mailto:freeswitch-users at lists.freeswitch.org>
Subject: Re: [Freeswitch-users] SMS Nobody to send to: Profile internal
 
I'd say start simple, do:
 

then send a message and make sure you receive it back.
 


Regards,
 
David Villasmil
email: mailto:david.villasmil.work at gmail.com
phone: +34669448337
 
 
On Fri, Aug 2, 2019 at 12:16 AM Sean Devoy <mailto:sdevoy at bizfocused.com> wrote:
Thanks, I have done both of those already.
I can’t find ANYTHING about profile.
 
From: FreeSWITCH-users <mailto:freeswitch-users-bounces at lists.freeswitch.org> On Behalf Of David Villasmil
Sent: Thursday, August 1, 2019 3:49 PM
To: FreeSWITCH Users Help <mailto:freeswitch-users at lists.freeswitch.org>
Subject: Re: [Freeswitch-users] SMS Nobody to send to: Profile internal
 
Try in the chat dialplan, I can’t remember where it is. Checkout mod_sms
 
On Thu, 1 Aug 2019 at 19:48, Sean Devoy <mailto:sdevoy at bizfocused.com> wrote:
Hi,
I have a multitenant server that I am trying to get SMS messaging working on.
 
When I send a text “xxx” from one extension to another I get:
 
2019-08-01 18:02:56.952248 [WARNING] sofia_presence.c:221 Not sending to local box for 666@[fqdn here]
2019-08-01 18:02:56.952248 [ERR] sofia_presence.c:272 Chat proto [sip]
from ["667" <sip:667@[fqdn here]>;tag=72173e0a]
to [666@[fqdn here]]
xxx
Nobody to send to: Profile internal
 
Where do I define the profile?  What goes in it?  The FQDN or context maybe?
 
Thanks,
Sean
_________________________________________________________________________

The FreeSWITCH project is sponsored by SignalWire https://signalwire.com
Enhance your FreeSWITCH install with disruptive priced SMS and PSTN services.
Build your next product on our scalable cloud platform.

Join our online community to chat in real time https://signalwire.community

Professional FreeSWITCH Services
mailto:sales at freeswitch.com
https://freeswitch.com

Official FreeSWITCH Sites
https://freeswitch.com/oss
https://freeswitch.org/confluence
https://cluecon.com

FreeSWITCH-users mailing list
mailto:FreeSWITCH-users at lists.freeswitch.org
http://lists.freeswitch.org/mailman/listinfo/freeswitch-users
UNSUBSCRIBE:http://lists.freeswitch.org/mailman/options/freeswitch-users
https://freeswitch.com
-- 
Regards,
 
David Villasmil
email: mailto:david.villasmil.work at gmail.com
phone: +34669448337
_________________________________________________________________________

The FreeSWITCH project is sponsored by SignalWire https://signalwire.com
Enhance your FreeSWITCH install with disruptive priced SMS and PSTN services.
Build your next product on our scalable cloud platform.

Join our online community to chat in real time https://signalwire.community

Professional FreeSWITCH Services
mailto:sales at freeswitch.com
https://freeswitch.com

Official FreeSWITCH Sites
https://freeswitch.com/oss
https://freeswitch.org/confluence
https://cluecon.com

FreeSWITCH-users mailing list
mailto:FreeSWITCH-users at lists.freeswitch.org
http://lists.freeswitch.org/mailman/listinfo/freeswitch-users
UNSUBSCRIBE:http://lists.freeswitch.org/mailman/options/freeswitch-users
https://freeswitch.com
_________________________________________________________________________

The FreeSWITCH project is sponsored by SignalWire https://signalwire.com
Enhance your FreeSWITCH install with disruptive priced SMS and PSTN services.
Build your next product on our scalable cloud platform.

Join our online community to chat in real time https://signalwire.community

Professional FreeSWITCH Services
mailto:sales at freeswitch.com
https://freeswitch.com

Official FreeSWITCH Sites
https://freeswitch.com/oss
https://freeswitch.org/confluence
https://cluecon.com

FreeSWITCH-users mailing list
mailto:FreeSWITCH-users at lists.freeswitch.org
http://lists.freeswitch.org/mailman/listinfo/freeswitch-users
UNSUBSCRIBE:http://lists.freeswitch.org/mailman/options/freeswitch-users
https://freeswitch.com
-- 
Regards,

David Villasmil
email: mailto:david.villasmil.work at gmail.com
phone: +34669448337

From abaci64 at gmail.com  Wed Aug  7 21:39:30 2019
From: abaci64 at gmail.com (Abaci B)
Date: Wed, 7 Aug 2019 17:39:30 -0400
Subject: [Freeswitch-users] SMS Nobody to send to: Profile internal
In-Reply-To: <BN6PR0101MB2850030C2C87C1FE5B963B16BBD40@BN6PR0101MB2850.prod.exchangelabs.com>
References: <BN6PR0101MB28506BD2FD572E5F8A7AFCEABBDE0@BN6PR0101MB2850.prod.exchangelabs.com>
 <CAFGRPVqzaT6Z89SvxAT5tYC5TbfuFTnFdCm2aEgOOs1PzLr1cA@mail.gmail.com>
 <BN6PR0101MB28507CF85608F624837510A4BBDE0@BN6PR0101MB2850.prod.exchangelabs.com>
 <CAFGRPVrx+HzYt8Skgu2KKNxVe1qcq-9+Rw+x-=y7xevNmwwAWw@mail.gmail.com>
 <BN6PR0101MB2850127C8422340A3020FF30BBDA0@BN6PR0101MB2850.prod.exchangelabs.com>
 <CAFGRPVpVXmEjEP7_iPs3e0Ug8ThLmiYi_f_mVN42H4JPvGx8-g@mail.gmail.com>
 <BN6PR0101MB2850030C2C87C1FE5B963B16BBD40@BN6PR0101MB2850.prod.exchangelabs.com>
Message-ID: <CAFmZFiNHtXMA3c5-tcO5n0ORtuvSV9pThMzEU0FgfJu5wF=Zeg@mail.gmail.com>

try ${_body}

On Wed, Aug 7, 2019 at 5:26 PM Sean Devoy <sdevoy at bizfocused.com> wrote:

> I found this thread from 2013 that identified the issue as the
> sip-force-contact parameter.
>
> http://freeswitch-users.2379917.n2.nabble.com/IM-messaging-on-FreeSwitch-td7588347.html
>
> I removed the NDLB parameter and I get back "Hello, you said:" but the
> ${body} part is not coming through.
>
> Any ideas?
>
> From: FreeSWITCH-users <freeswitch-users-bounces at lists.freeswitch.org> On
> Behalf Of David Villasmil
> Sent: Monday, August 5, 2019 2:36 PM
> To: FreeSWITCH Users Help <freeswitch-users at lists.freeswitch.org>
> Subject: Re: [Freeswitch-users] SMS Nobody to send to: Profile internal
>
> I tan into this very same issue and ended up switching to Kamailio :)
>
> Let me see if I can find my old notes
>
> On Mon, 5 Aug 2019 at 18:45, Sean Devoy <mailto:sdevoy at bizfocused.com>
> wrote:
> I did this first, exactly as shown and got the same message.
>
> I saw a message somewhere that I need to “alias” something, but I do not
> understand what to do.
>
> I am on Multitenant and I expect that is part of the issue.  How do I
> define the domain in a chat plan and on the phone?  Clearly it is
> registered under its domain.
>
> From: FreeSWITCH-users <mailto:
> freeswitch-users-bounces at lists.freeswitch.org> On Behalf Of David
> Villasmil
> Sent: Friday, August 2, 2019 1:44 PM
> To: FreeSWITCH Users Help <mailto:freeswitch-users at lists.freeswitch.org>
> Subject: Re: [Freeswitch-users] SMS Nobody to send to: Profile internal
>
> I'd say start simple, do:
>
>
> then send a message and make sure you receive it back.
>
>
>
> Regards,
>
> David Villasmil
> email: mailto:david.villasmil.work at gmail.com
> phone: +34669448337
>
>
> On Fri, Aug 2, 2019 at 12:16 AM Sean Devoy <mailto:sdevoy at bizfocused.com>
> wrote:
> Thanks, I have done both of those already.
> I can’t find ANYTHING about profile.
>
> From: FreeSWITCH-users <mailto:
> freeswitch-users-bounces at lists.freeswitch.org> On Behalf Of David
> Villasmil
> Sent: Thursday, August 1, 2019 3:49 PM
> To: FreeSWITCH Users Help <mailto:freeswitch-users at lists.freeswitch.org>
> Subject: Re: [Freeswitch-users] SMS Nobody to send to: Profile internal
>
> Try in the chat dialplan, I can’t remember where it is. Checkout mod_sms
>
> On Thu, 1 Aug 2019 at 19:48, Sean Devoy <mailto:sdevoy at bizfocused.com>
> wrote:
> Hi,
> I have a multitenant server that I am trying to get SMS messaging working
> on.
>
> When I send a text “xxx” from one extension to another I get:
>
> 2019-08-01 18:02:56.952248 [WARNING] sofia_presence.c:221 Not sending to
> local box for 666@[fqdn here]
> 2019-08-01 18:02:56.952248 [ERR] sofia_presence.c:272 Chat proto [sip]
> from ["667" <sip:667@[fqdn here]>;tag=72173e0a]
> to [666@[fqdn here]]
> xxx
> Nobody to send to: Profile internal
>
> Where do I define the profile?  What goes in it?  The FQDN or context
> maybe?
>
> Thanks,
> Sean
> _________________________________________________________________________
>
> The FreeSWITCH project is sponsored by SignalWire https://signalwire.com
> Enhance your FreeSWITCH install with disruptive priced SMS and PSTN
> services.
> Build your next product on our scalable cloud platform.
>
> Join our online community to chat in real time
> https://signalwire.community
>
> Professional FreeSWITCH Services
> mailto:sales at freeswitch.com
> https://freeswitch.com
>
> Official FreeSWITCH Sites
> https://freeswitch.com/oss
> https://freeswitch.org/confluence
> https://cluecon.com
>
> FreeSWITCH-users mailing list
> mailto:FreeSWITCH-users at lists.freeswitch.org
> http://lists.freeswitch.org/mailman/listinfo/freeswitch-users
> UNSUBSCRIBE:http://lists.freeswitch.org/mailman/options/freeswitch-users
> https://freeswitch.com
> --
> Regards,
>
> David Villasmil
> email: mailto:david.villasmil.work at gmail.com
> phone: +34669448337
> _________________________________________________________________________
>
> The FreeSWITCH project is sponsored by SignalWire https://signalwire.com
> Enhance your FreeSWITCH install with disruptive priced SMS and PSTN
> services.
> Build your next product on our scalable cloud platform.
>
> Join our online community to chat in real time
> https://signalwire.community
>
> Professional FreeSWITCH Services
> mailto:sales at freeswitch.com
> https://freeswitch.com
>
> Official FreeSWITCH Sites
> https://freeswitch.com/oss
> https://freeswitch.org/confluence
> https://cluecon.com
>
> FreeSWITCH-users mailing list
> mailto:FreeSWITCH-users at lists.freeswitch.org
> http://lists.freeswitch.org/mailman/listinfo/freeswitch-users
> UNSUBSCRIBE:http://lists.freeswitch.org/mailman/options/freeswitch-users
> https://freeswitch.com
> _________________________________________________________________________
>
> The FreeSWITCH project is sponsored by SignalWire https://signalwire.com
> Enhance your FreeSWITCH install with disruptive priced SMS and PSTN
> services.
> Build your next product on our scalable cloud platform.
>
> Join our online community to chat in real time
> https://signalwire.community
>
> Professional FreeSWITCH Services
> mailto:sales at freeswitch.com
> https://freeswitch.com
>
> Official FreeSWITCH Sites
> https://freeswitch.com/oss
> https://freeswitch.org/confluence
> https://cluecon.com
>
> FreeSWITCH-users mailing list
> mailto:FreeSWITCH-users at lists.freeswitch.org
> http://lists.freeswitch.org/mailman/listinfo/freeswitch-users
> UNSUBSCRIBE:http://lists.freeswitch.org/mailman/options/freeswitch-users
> https://freeswitch.com
> --
> Regards,
>
> David Villasmil
> email: mailto:david.villasmil.work at gmail.com
> phone: +34669448337
> _________________________________________________________________________
>
> The FreeSWITCH project is sponsored by SignalWire https://signalwire.com
> Enhance your FreeSWITCH install with disruptive priced SMS and PSTN
> services.
> Build your next product on our scalable cloud platform.
>
> Join our online community to chat in real time
> https://signalwire.community
>
> Professional FreeSWITCH Services
> sales at freeswitch.com
> https://freeswitch.com
>
> Official FreeSWITCH Sites
> https://freeswitch.com/oss
> https://freeswitch.org/confluence
> https://cluecon.com
>
> FreeSWITCH-users mailing list
> FreeSWITCH-users at lists.freeswitch.org
> http://lists.freeswitch.org/mailman/listinfo/freeswitch-users
> UNSUBSCRIBE:http://lists.freeswitch.org/mailman/options/freeswitch-users
> https://freeswitch.com
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.freeswitch.org/pipermail/freeswitch-users/attachments/20190807/907dc308/attachment-0001.html>

From sdevoy at bizfocused.com  Wed Aug  7 23:59:58 2019
From: sdevoy at bizfocused.com (Sean Devoy)
Date: Wed, 7 Aug 2019 23:59:58 +0000
Subject: [Freeswitch-users] SMS Nobody to send to: Profile internal
In-Reply-To: <CAFmZFiNHtXMA3c5-tcO5n0ORtuvSV9pThMzEU0FgfJu5wF=Zeg@mail.gmail.com>
References: <BN6PR0101MB28506BD2FD572E5F8A7AFCEABBDE0@BN6PR0101MB2850.prod.exchangelabs.com>
 <CAFGRPVqzaT6Z89SvxAT5tYC5TbfuFTnFdCm2aEgOOs1PzLr1cA@mail.gmail.com>
 <BN6PR0101MB28507CF85608F624837510A4BBDE0@BN6PR0101MB2850.prod.exchangelabs.com>
 <CAFGRPVrx+HzYt8Skgu2KKNxVe1qcq-9+Rw+x-=y7xevNmwwAWw@mail.gmail.com>
 <BN6PR0101MB2850127C8422340A3020FF30BBDA0@BN6PR0101MB2850.prod.exchangelabs.com>
 <CAFGRPVpVXmEjEP7_iPs3e0Ug8ThLmiYi_f_mVN42H4JPvGx8-g@mail.gmail.com>
 <BN6PR0101MB2850030C2C87C1FE5B963B16BBD40@BN6PR0101MB2850.prod.exchangelabs.com>
 <CAFmZFiNHtXMA3c5-tcO5n0ORtuvSV9pThMzEU0FgfJu5wF=Zeg@mail.gmail.com>
Message-ID: <BN6PR0101MB28502AD762DDAD26C3F23A66BBD40@BN6PR0101MB2850.prod.exchangelabs.com>

Thank You!

I am almost there.  What is the syntax to send to my outbound gateway?

When I bridge a voice call it is to “sofia/gateway/voip-innovations-outbound/$1” if that help.

Sean

From: FreeSWITCH-users <freeswitch-users-bounces at lists.freeswitch.org> On Behalf Of Abaci B
Sent: Wednesday, August 7, 2019 5:40 PM
To: FreeSWITCH Users Help <freeswitch-users at lists.freeswitch.org>
Subject: Re: [Freeswitch-users] SMS Nobody to send to: Profile internal

try ${_body} 

On Wed, Aug 7, 2019 at 5:26 PM Sean Devoy <mailto:sdevoy at bizfocused.com> wrote:
I found this thread from 2013 that identified the issue as the sip-force-contact parameter.
http://freeswitch-users.2379917.n2.nabble.com/IM-messaging-on-FreeSwitch-td7588347.html

I removed the NDLB parameter and I get back "Hello, you said:" but the ${body} part is not coming through.

Any ideas?

From: FreeSWITCH-users <mailto:freeswitch-users-bounces at lists.freeswitch.org> On Behalf Of David Villasmil
Sent: Monday, August 5, 2019 2:36 PM
To: FreeSWITCH Users Help <mailto:freeswitch-users at lists.freeswitch.org>
Subject: Re: [Freeswitch-users] SMS Nobody to send to: Profile internal

I tan into this very same issue and ended up switching to Kamailio :)

Let me see if I can find my old notes

On Mon, 5 Aug 2019 at 18:45, Sean Devoy <mailto:mailto:sdevoy at bizfocused.com> wrote:
I did this first, exactly as shown and got the same message.
 
I saw a message somewhere that I need to “alias” something, but I do not understand what to do.
 
I am on Multitenant and I expect that is part of the issue.  How do I define the domain in a chat plan and on the phone?  Clearly it is registered under its domain.
 
From: FreeSWITCH-users <mailto:mailto:freeswitch-users-bounces at lists.freeswitch.org> On Behalf Of David Villasmil
Sent: Friday, August 2, 2019 1:44 PM
To: FreeSWITCH Users Help <mailto:mailto:freeswitch-users at lists.freeswitch.org>
Subject: Re: [Freeswitch-users] SMS Nobody to send to: Profile internal
 
I'd say start simple, do:
 

then send a message and make sure you receive it back.
 


Regards,
 
David Villasmil
email: mailto:mailto:david.villasmil.work at gmail.com
phone: +34669448337
 
 
On Fri, Aug 2, 2019 at 12:16 AM Sean Devoy <mailto:mailto:sdevoy at bizfocused.com> wrote:
Thanks, I have done both of those already.
I can’t find ANYTHING about profile.
 
From: FreeSWITCH-users <mailto:mailto:freeswitch-users-bounces at lists.freeswitch.org> On Behalf Of David Villasmil
Sent: Thursday, August 1, 2019 3:49 PM
To: FreeSWITCH Users Help <mailto:mailto:freeswitch-users at lists.freeswitch.org>
Subject: Re: [Freeswitch-users] SMS Nobody to send to: Profile internal
 
Try in the chat dialplan, I can’t remember where it is. Checkout mod_sms
 
On Thu, 1 Aug 2019 at 19:48, Sean Devoy <mailto:mailto:sdevoy at bizfocused.com> wrote:
Hi,
I have a multitenant server that I am trying to get SMS messaging working on.
 
When I send a text “xxx” from one extension to another I get:
 
2019-08-01 18:02:56.952248 [WARNING] sofia_presence.c:221 Not sending to local box for 666@[fqdn here]
2019-08-01 18:02:56.952248 [ERR] sofia_presence.c:272 Chat proto [sip]
from ["667" <sip:667@[fqdn here]>;tag=72173e0a]
to [666@[fqdn here]]
xxx
Nobody to send to: Profile internal
 
Where do I define the profile?  What goes in it?  The FQDN or context maybe?
 
Thanks,
Sean
_________________________________________________________________________

The FreeSWITCH project is sponsored by SignalWire https://signalwire.com
Enhance your FreeSWITCH install with disruptive priced SMS and PSTN services.
Build your next product on our scalable cloud platform.

Join our online community to chat in real time https://signalwire.community

Professional FreeSWITCH Services
mailto:mailto:sales at freeswitch.com
https://freeswitch.com

Official FreeSWITCH Sites
https://freeswitch.com/oss
https://freeswitch.org/confluence
https://cluecon.com

FreeSWITCH-users mailing list
mailto:mailto:FreeSWITCH-users at lists.freeswitch.org
http://lists.freeswitch.org/mailman/listinfo/freeswitch-users
UNSUBSCRIBE:http://lists.freeswitch.org/mailman/options/freeswitch-users
https://freeswitch.com
-- 
Regards,
 
David Villasmil
email: mailto:mailto:david.villasmil.work at gmail.com
phone: +34669448337
_________________________________________________________________________

The FreeSWITCH project is sponsored by SignalWire https://signalwire.com
Enhance your FreeSWITCH install with disruptive priced SMS and PSTN services.
Build your next product on our scalable cloud platform.

Join our online community to chat in real time https://signalwire.community

Professional FreeSWITCH Services
mailto:mailto:sales at freeswitch.com
https://freeswitch.com

Official FreeSWITCH Sites
https://freeswitch.com/oss
https://freeswitch.org/confluence
https://cluecon.com

FreeSWITCH-users mailing list
mailto:mailto:FreeSWITCH-users at lists.freeswitch.org
http://lists.freeswitch.org/mailman/listinfo/freeswitch-users
UNSUBSCRIBE:http://lists.freeswitch.org/mailman/options/freeswitch-users
https://freeswitch.com
_________________________________________________________________________

The FreeSWITCH project is sponsored by SignalWire https://signalwire.com
Enhance your FreeSWITCH install with disruptive priced SMS and PSTN services.
Build your next product on our scalable cloud platform.

Join our online community to chat in real time https://signalwire.community

Professional FreeSWITCH Services
mailto:mailto:sales at freeswitch.com
https://freeswitch.com

Official FreeSWITCH Sites
https://freeswitch.com/oss
https://freeswitch.org/confluence
https://cluecon.com

FreeSWITCH-users mailing list
mailto:mailto:FreeSWITCH-users at lists.freeswitch.org
http://lists.freeswitch.org/mailman/listinfo/freeswitch-users
UNSUBSCRIBE:http://lists.freeswitch.org/mailman/options/freeswitch-users
https://freeswitch.com
-- 
Regards,

David Villasmil
email: mailto:mailto:david.villasmil.work at gmail.com
phone: +34669448337
_________________________________________________________________________

The FreeSWITCH project is sponsored by SignalWire https://signalwire.com
Enhance your FreeSWITCH install with disruptive priced SMS and PSTN services.
Build your next product on our scalable cloud platform.

Join our online community to chat in real time https://signalwire.community

Professional FreeSWITCH Services
mailto:sales at freeswitch.com
https://freeswitch.com

Official FreeSWITCH Sites
https://freeswitch.com/oss
https://freeswitch.org/confluence
https://cluecon.com

FreeSWITCH-users mailing list
mailto:FreeSWITCH-users at lists.freeswitch.org
http://lists.freeswitch.org/mailman/listinfo/freeswitch-users
UNSUBSCRIBE:http://lists.freeswitch.org/mailman/options/freeswitch-users
https://freeswitch.com

From sdevoy at bizfocused.com  Thu Aug  8 14:18:00 2019
From: sdevoy at bizfocused.com (Sean Devoy)
Date: Thu, 8 Aug 2019 14:18:00 +0000
Subject: [Freeswitch-users] SMS Nobody to send to: Profile internal
In-Reply-To: <BN6PR0101MB28502AD762DDAD26C3F23A66BBD40@BN6PR0101MB2850.prod.exchangelabs.com>
References: <BN6PR0101MB28506BD2FD572E5F8A7AFCEABBDE0@BN6PR0101MB2850.prod.exchangelabs.com>
 <CAFGRPVqzaT6Z89SvxAT5tYC5TbfuFTnFdCm2aEgOOs1PzLr1cA@mail.gmail.com>
 <BN6PR0101MB28507CF85608F624837510A4BBDE0@BN6PR0101MB2850.prod.exchangelabs.com>
 <CAFGRPVrx+HzYt8Skgu2KKNxVe1qcq-9+Rw+x-=y7xevNmwwAWw@mail.gmail.com>
 <BN6PR0101MB2850127C8422340A3020FF30BBDA0@BN6PR0101MB2850.prod.exchangelabs.com>
 <CAFGRPVpVXmEjEP7_iPs3e0Ug8ThLmiYi_f_mVN42H4JPvGx8-g@mail.gmail.com>
 <BN6PR0101MB2850030C2C87C1FE5B963B16BBD40@BN6PR0101MB2850.prod.exchangelabs.com>
 <CAFmZFiNHtXMA3c5-tcO5n0ORtuvSV9pThMzEU0FgfJu5wF=Zeg@mail.gmail.com>
 <BN6PR0101MB28502AD762DDAD26C3F23A66BBD40@BN6PR0101MB2850.prod.exchangelabs.com>
Message-ID: <BN6PR0101MB28501729F60718654DA906D5BBD70@BN6PR0101MB2850.prod.exchangelabs.com>

I got this info from my provider.

Thanks for the help everyone.

-----Original Message-----
From: FreeSWITCH-users <freeswitch-users-bounces at lists.freeswitch.org> On Behalf Of Sean Devoy
Sent: Wednesday, August 7, 2019 8:00 PM
To: FreeSWITCH Users Help <freeswitch-users at lists.freeswitch.org>
Subject: Re: [Freeswitch-users] SMS Nobody to send to: Profile internal

Thank You!

I am almost there.  What is the syntax to send to my outbound gateway?

When I bridge a voice call it is to “sofia/gateway/voip-innovations-outbound/$1” if that help.

Sean

From: FreeSWITCH-users <freeswitch-users-bounces at lists.freeswitch.org> On Behalf Of Abaci B
Sent: Wednesday, August 7, 2019 5:40 PM
To: FreeSWITCH Users Help <freeswitch-users at lists.freeswitch.org>
Subject: Re: [Freeswitch-users] SMS Nobody to send to: Profile internal

try ${_body} 

On Wed, Aug 7, 2019 at 5:26 PM Sean Devoy <mailto:sdevoy at bizfocused.com> wrote:
I found this thread from 2013 that identified the issue as the sip-force-contact parameter.
http://freeswitch-users.2379917.n2.nabble.com/IM-messaging-on-FreeSwitch-td7588347.html

I removed the NDLB parameter and I get back "Hello, you said:" but the ${body} part is not coming through.

Any ideas?

From: FreeSWITCH-users <mailto:freeswitch-users-bounces at lists.freeswitch.org> On Behalf Of David Villasmil
Sent: Monday, August 5, 2019 2:36 PM
To: FreeSWITCH Users Help <mailto:freeswitch-users at lists.freeswitch.org>
Subject: Re: [Freeswitch-users] SMS Nobody to send to: Profile internal

I tan into this very same issue and ended up switching to Kamailio :)

Let me see if I can find my old notes

On Mon, 5 Aug 2019 at 18:45, Sean Devoy <mailto:mailto:sdevoy at bizfocused.com> wrote:
I did this first, exactly as shown and got the same message.
 
I saw a message somewhere that I need to “alias” something, but I do not understand what to do.
 
I am on Multitenant and I expect that is part of the issue.  How do I define the domain in a chat plan and on the phone?  Clearly it is registered under its domain.
 
From: FreeSWITCH-users <mailto:mailto:freeswitch-users-bounces at lists.freeswitch.org> On Behalf Of David Villasmil
Sent: Friday, August 2, 2019 1:44 PM
To: FreeSWITCH Users Help <mailto:mailto:freeswitch-users at lists.freeswitch.org>
Subject: Re: [Freeswitch-users] SMS Nobody to send to: Profile internal
 
I'd say start simple, do:
 

then send a message and make sure you receive it back.
 


Regards,
 
David Villasmil
email: mailto:mailto:david.villasmil.work at gmail.com
phone: +34669448337
 
 
On Fri, Aug 2, 2019 at 12:16 AM Sean Devoy <mailto:mailto:sdevoy at bizfocused.com> wrote:
Thanks, I have done both of those already.
I can’t find ANYTHING about profile.
 
From: FreeSWITCH-users <mailto:mailto:freeswitch-users-bounces at lists.freeswitch.org> On Behalf Of David Villasmil
Sent: Thursday, August 1, 2019 3:49 PM
To: FreeSWITCH Users Help <mailto:mailto:freeswitch-users at lists.freeswitch.org>
Subject: Re: [Freeswitch-users] SMS Nobody to send to: Profile internal
 
Try in the chat dialplan, I can’t remember where it is. Checkout mod_sms
 
On Thu, 1 Aug 2019 at 19:48, Sean Devoy <mailto:mailto:sdevoy at bizfocused.com> wrote:
Hi,
I have a multitenant server that I am trying to get SMS messaging working on.
 
When I send a text “xxx” from one extension to another I get:
 
2019-08-01 18:02:56.952248 [WARNING] sofia_presence.c:221 Not sending to local box for 666@[fqdn here]
2019-08-01 18:02:56.952248 [ERR] sofia_presence.c:272 Chat proto [sip] from ["667" <sip:667@[fqdn here]>;tag=72173e0a] to [666@[fqdn here]] xxx Nobody to send to: Profile internal
 
Where do I define the profile?  What goes in it?  The FQDN or context maybe?
 
Thanks,
Sean
_________________________________________________________________________

The FreeSWITCH project is sponsored by SignalWire https://signalwire.com Enhance your FreeSWITCH install with disruptive priced SMS and PSTN services.
Build your next product on our scalable cloud platform.

Join our online community to chat in real time https://signalwire.community

Professional FreeSWITCH Services
mailto:mailto:sales at freeswitch.com
https://freeswitch.com

Official FreeSWITCH Sites
https://freeswitch.com/oss
https://freeswitch.org/confluence
https://cluecon.com

FreeSWITCH-users mailing list
mailto:mailto:FreeSWITCH-users at lists.freeswitch.org
http://lists.freeswitch.org/mailman/listinfo/freeswitch-users
UNSUBSCRIBE:http://lists.freeswitch.org/mailman/options/freeswitch-users
https://freeswitch.com
--
Regards,
 
David Villasmil
email: mailto:mailto:david.villasmil.work at gmail.com
phone: +34669448337
_________________________________________________________________________

The FreeSWITCH project is sponsored by SignalWire https://signalwire.com Enhance your FreeSWITCH install with disruptive priced SMS and PSTN services.
Build your next product on our scalable cloud platform.

Join our online community to chat in real time https://signalwire.community

Professional FreeSWITCH Services
mailto:mailto:sales at freeswitch.com
https://freeswitch.com

Official FreeSWITCH Sites
https://freeswitch.com/oss
https://freeswitch.org/confluence
https://cluecon.com

FreeSWITCH-users mailing list
mailto:mailto:FreeSWITCH-users at lists.freeswitch.org
http://lists.freeswitch.org/mailman/listinfo/freeswitch-users
UNSUBSCRIBE:http://lists.freeswitch.org/mailman/options/freeswitch-users
https://freeswitch.com
_________________________________________________________________________

The FreeSWITCH project is sponsored by SignalWire https://signalwire.com Enhance your FreeSWITCH install with disruptive priced SMS and PSTN services.
Build your next product on our scalable cloud platform.

Join our online community to chat in real time https://signalwire.community

Professional FreeSWITCH Services
mailto:mailto:sales at freeswitch.com
https://freeswitch.com

Official FreeSWITCH Sites
https://freeswitch.com/oss
https://freeswitch.org/confluence
https://cluecon.com

FreeSWITCH-users mailing list
mailto:mailto:FreeSWITCH-users at lists.freeswitch.org
http://lists.freeswitch.org/mailman/listinfo/freeswitch-users
UNSUBSCRIBE:http://lists.freeswitch.org/mailman/options/freeswitch-users
https://freeswitch.com
--
Regards,

David Villasmil
email: mailto:mailto:david.villasmil.work at gmail.com
phone: +34669448337
_________________________________________________________________________

The FreeSWITCH project is sponsored by SignalWire https://signalwire.com Enhance your FreeSWITCH install with disruptive priced SMS and PSTN services.
Build your next product on our scalable cloud platform.

Join our online community to chat in real time https://signalwire.community

Professional FreeSWITCH Services
mailto:sales at freeswitch.com
https://freeswitch.com

Official FreeSWITCH Sites
https://freeswitch.com/oss
https://freeswitch.org/confluence
https://cluecon.com

FreeSWITCH-users mailing list
mailto:FreeSWITCH-users at lists.freeswitch.org
http://lists.freeswitch.org/mailman/listinfo/freeswitch-users
UNSUBSCRIBE:http://lists.freeswitch.org/mailman/options/freeswitch-users
https://freeswitch.com
_________________________________________________________________________

The FreeSWITCH project is sponsored by SignalWire https://signalwire.com Enhance your FreeSWITCH install with disruptive priced SMS and PSTN services.
Build your next product on our scalable cloud platform.

Join our online community to chat in real time https://signalwire.community

Professional FreeSWITCH Services
sales at freeswitch.com
https://freeswitch.com

Official FreeSWITCH Sites
https://freeswitch.com/oss
https://freeswitch.org/confluence
https://cluecon.com

FreeSWITCH-users mailing list
FreeSWITCH-users at lists.freeswitch.org
http://lists.freeswitch.org/mailman/listinfo/freeswitch-users
UNSUBSCRIBE:http://lists.freeswitch.org/mailman/options/freeswitch-users
https://freeswitch.com

From sdevoy at bizfocused.com  Thu Aug  8 14:23:21 2019
From: sdevoy at bizfocused.com (Sean Devoy)
Date: Thu, 8 Aug 2019 14:23:21 +0000
Subject: [Freeswitch-users] Chat Plan Handling
Message-ID: <BN6PR0101MB2850CAB4A46A060A39A59849BBD70@BN6PR0101MB2850.prod.exchangelabs.com>

Hi,

How can to stop the default handling of an inbound SMS message?

I am working on a chat plan strategy.  I need to route external (DID) SMS messages to a registered extension.  I think I do that with <action application="chat" data="sip |...

However, I can't stop the original SMS message from getting an error for no registered user.  I have added <action application="stop" data=""/> but the default route is still attempted.  The error causes no problems, but it may cause me to miss actual errors when they occur.

Thanks,
Sean
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.freeswitch.org/pipermail/freeswitch-users/attachments/20190808/31bb2a0f/attachment.html>

From steveayre at gmail.com  Fri Aug  9 16:46:16 2019
From: steveayre at gmail.com (Steven Ayre)
Date: Fri, 9 Aug 2019 17:46:16 +0100
Subject: [Freeswitch-users] hangup cause / sip cause ?
In-Reply-To: <20190802155112.2fb57fe2@linux>
References: <20190802155112.2fb57fe2@linux>
Message-ID: <CAFiqYu=FHhdk=44jcNS+aHu6nHa9Jz3sMrJiV0RQ+aBvymudrQ@mail.gmail.com>

Are you returning from the bridge to the dialplan for further processing?
Perhaps the b-leg fails with NORMAL_TEMPORARY_FAILURE, returns to dialplan,
and then you're hanging the a-leg up with NORMAL_CLEARING when it reaches
the end of the dialplan? Which would mean the Reason header sent on the
a-leg would indicate NORMAL_CLEARING.

On Sat, 3 Aug 2019 at 17:28, morbidus at rx900.org <morbidus at rx900.org> wrote:

> Hi i've wrote some dialplans for billing with this great engine which is
> freeswitch
> and i'm also using limits and failover ('manually', without the lcr
> module).
>
> Everything works ok and i'm impressed by its stability and performance !
>
> But i'm unable to get a 'final' termination cause for the calls as i'm
> used to get with asterisk:
> i'd like to have something like 'answered', 'cancel', 'busy',
> 'congestion', 'chanunavail', and so on
>
> so i'm writing last_bridge_hangup_cause, bridge_hangup_cause and
> hangup_cause in my cdr
> and in particular when the call goes thru the second or third trunk (when
> using failover)
> i get 'NORMAL_TEMPORARY_FAILURE', 'NORMAL_TEMPORARY_FAILURE',
> 'NORMAL_CLEARING'
> and i don't know which one of the three is the actual termination cause :)
>
> what are you guys using to get 'consistent' tc ?
> _________________________________________________________________________
>
> The FreeSWITCH project is sponsored by SignalWire https://signalwire.com
> Enhance your FreeSWITCH install with disruptive priced SMS and PSTN
> services.
> Build your next product on our scalable cloud platform.
>
> Join our online community to chat in real time
> https://signalwire.community
>
> Professional FreeSWITCH Services
> sales at freeswitch.com
> https://freeswitch.com
>
> Official FreeSWITCH Sites
> https://freeswitch.com/oss
> https://freeswitch.org/confluence
> https://cluecon.com
>
> FreeSWITCH-users mailing list
> FreeSWITCH-users at lists.freeswitch.org
> http://lists.freeswitch.org/mailman/listinfo/freeswitch-users
> UNSUBSCRIBE:http://lists.freeswitch.org/mailman/options/freeswitch-users
> https://freeswitch.com
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.freeswitch.org/pipermail/freeswitch-users/attachments/20190809/af3708db/attachment.html>

From keith at rhizomatica.org  Sat Aug 10 13:50:55 2019
From: keith at rhizomatica.org (Keith)
Date: Sat, 10 Aug 2019 15:50:55 +0200
Subject: [Freeswitch-users] Chat Plan Handling
In-Reply-To: <BN6PR0101MB2850CAB4A46A060A39A59849BBD70@BN6PR0101MB2850.prod.exchangelabs.com>
References: <BN6PR0101MB2850CAB4A46A060A39A59849BBD70@BN6PR0101MB2850.prod.exchangelabs.com>
Message-ID: <4841d657-d6a5-c1bb-e549-d904d69cd254@rhizomatica.org>


On 08/08/2019 16:23, Sean Devoy wrote:
>
> How can to stop the default handling of an inbound SMS message?

>


Hi Sean, after some long time trying to do that, then giving up, and
coming back to it, various times, I finally went for the source code
with a comb and it seems I finally found a way to do it:

Please see.
https://github.com/Rhizomatica/rccn/commit/db08b977711da1e09e3326db1723f6774a2b4e6c

Hmm, when making that commit, I referenced:
https://docs.freeswitch.org/switch__loadable__module_8c.html#a6389148319476a6f9858ccf4b889f8a4

Which is where I found in this comment:

/* The event was handled by an extension in the chatplan,

* so the event will be duplicated, modified and queued again,
 * but it won't be processed by the chatplan again.
 * So this copy of the event can be destroyed by the caller.
 */

This is the condition for skipping the default handling:

if (switch_true
<https://docs.freeswitch.org/switch__utils_8h.html#a890e4243bd6e31e6c68a83832da023a7>(switch_event_get_header
<https://docs.freeswitch.org/group__events.html#ga5c3108ab2e8d73d8ef8e6c41224059aa>(message_event,
"final_delivery"))) {
    do_skip = 1;
}


so you need the final_delivery event header. Not sure how you add that
in an XML dialplan, or in your implementation.

Maybe the python in github can give you some clues.

and no, stop and all that does not work - It only prevents the chatplan
from execing applications. (IIUC)


Cheers

Keith.



-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.freeswitch.org/pipermail/freeswitch-users/attachments/20190810/f7ed0726/attachment.html>

From sdevoy at bizfocused.com  Sat Aug 10 16:24:08 2019
From: sdevoy at bizfocused.com (Sean Devoy)
Date: Sat, 10 Aug 2019 16:24:08 +0000
Subject: [Freeswitch-users] Chat Plan Handling
In-Reply-To: <dbc08e75-505a-d9d0-89ae-519d10558043@rhizomatica.org>
References: <BN6PR0101MB2850CAB4A46A060A39A59849BBD70@BN6PR0101MB2850.prod.exchangelabs.com>
 <dbc08e75-505a-d9d0-89ae-519d10558043@rhizomatica.org>
Message-ID: <BN6PR0101MB285066D810D31075D6A3F520BBD10@BN6PR0101MB2850.prod.exchangelabs.com>

Thanks Keith, that is helpful if we need to cancel a message.

What I ended up with is NOT cancelling the event but modifying it to have the updated information it needs to route correctly. For inbound SMS messages, I just set the "to" value to a registered extension and let the plan exit.  The default handling is to then send it.

For external (out to my VSP) I had to set several "fields":
[cid:image001.png at 01D54F76.816FCA20]

Hope that helps others,
Sean


From: k at rhizomatica.org <k at rhizomatica.org>
Sent: Saturday, August 10, 2019 7:56 AM
To: FreeSWITCH Users Help <freeswitch-users at lists.freeswitch.org>; Sean Devoy <sdevoy at bizfocused.com>
Subject: Re: [Freeswitch-users] Chat Plan Handling


On 08/08/2019 16:23, Sean Devoy wrote:
>
> How can to stop the default handling of an inbound SMS message?

>



Hi Sean, after some long time trying to do that, then giving up, and coming back to it, various times, I finally went for the source code with a comb and it seems I finally found a way to do it:

Please see. https://github.com/Rhizomatica/rccn/commit/db08b977711da1e09e3326db1723f6774a2b4e6c

Hmm, when making that commit, I referenced: https://docs.freeswitch.org/switch__loadable__module_8c.html#a6389148319476a6f9858ccf4b889f8a4

Which is where I found in this comment:

/* The event was handled by an extension in the chatplan,
* so the event will be duplicated, modified and queued again,
  * but it won't be processed by the chatplan again.
  * So this copy of the event can be destroyed by the caller.
  */

This is the condition for skipping the default handling:

if (switch_true<https://docs.freeswitch.org/switch__utils_8h.html#a890e4243bd6e31e6c68a83832da023a7>(switch_event_get_header<https://docs.freeswitch.org/group__events.html#ga5c3108ab2e8d73d8ef8e6c41224059aa>(message_event, "final_delivery"))) {
    do_skip = 1;
}



so you need the final_delivery event header. Not sure how you add that in an XML dialplan, or in your implementation.

Maybe the python in github can give you some clues.

and no, stop and all that does not work - It only prevents the chatplan from execing applications. (IIUC)



Cheers

Keith.




-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.freeswitch.org/pipermail/freeswitch-users/attachments/20190810/bcc6a5e9/attachment-0001.html>
-------------- next part --------------
A non-text attachment was scrubbed...
Name: image001.png
Type: image/png
Size: 34250 bytes
Desc: image001.png
URL: <http://lists.freeswitch.org/pipermail/freeswitch-users/attachments/20190810/bcc6a5e9/attachment-0001.png>

From ankit.joban at gmail.com  Tue Aug  6 07:55:48 2019
From: ankit.joban at gmail.com (ankit jobanputra)
Date: Tue, 6 Aug 2019 13:25:48 +0530
Subject: [Freeswitch-users] CDR Record variables
Message-ID: <CAOKETebAY7pAN2naYy1oDE8Bjgf80+xcUJr0x6o-vS60N4Yumg@mail.gmail.com>

Hello,

Getting the record variables inconsistently for freeswitch CDR.

 recording_file, record_ms and record_file_size.

Is there any configuration for setting this up. I have enabled the
user_record variable in extension configuration.

Not getting record_file_size for normal user-user call.
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.freeswitch.org/pipermail/freeswitch-users/attachments/20190806/04205d77/attachment.html>

From ankit.joban at gmail.com  Tue Aug  6 11:31:31 2019
From: ankit.joban at gmail.com (Ankit)
Date: Tue, 6 Aug 2019 04:31:31 -0700 (MST)
Subject: [Freeswitch-users] Recording Variables in CDR
Message-ID: <1565091091625-0.post@n2.nabble.com>

Not getting variable record_file_size for channel.

I have enabled the user_record filed in extensions configuration. Also what
checks are applied for recording_file and record_ms channel variables.



--
Sent from: http://freeswitch-users.2379917.n2.nabble.com/


From dandamudiveeru at gmail.com  Mon Aug  5 11:27:37 2019
From: dandamudiveeru at gmail.com (veeru anji)
Date: Mon, 5 Aug 2019 16:57:37 +0530
Subject: [Freeswitch-users] Unable to start the Free switch server
Message-ID: <CA+OWMBmsZu0uVNkfF+GjgivJSY0DP=q8W+JMno_7B1UHAzHhoA@mail.gmail.com>

Dear Team,
I am getting below error message.
This is the result when I am trying with Sofia status command
freeswitch at CITHYDDKTP-030> Sofia Status

                     Name          Type
  Data      State
=================================================================================================
            external-ipv6       profile
sip:mod_sofia@[::1]:5080
     RUNNING (0)
                 external       profile
sip:mod_sofia at 183.82.114.188:5080      RUNNING (0)
    external::example.com       gateway
sip:joeuser at example.com      NOREG
=================================================================================================
2 profiles 0 aliases

But below error is coming>>>>>>>>>>>>>>




*Error Creating SIP UA for profile: internal-ipv6
(sip:mod_sofia@[::1]:5060;transport=udp,tcp) ATTEMPT 3 (RETRY IN 5
SEC)2019-08-05 16:20:23.012205 [ERR] sofia.c:3238 Error Creating SIP UA for
profile: internal-ipv6 (sip:mod_sofia@[::1]:5060;transport=udp,tcp)The
likely causes for this are:1) Another application is already listening on
the specified address.2) The IP the profile is attempting to bind to is not
local to this system.*
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.freeswitch.org/pipermail/freeswitch-users/attachments/20190805/cd1d4c4e/attachment.html>

From dandamudiveeru at gmail.com  Mon Aug  5 11:32:02 2019
From: dandamudiveeru at gmail.com (Veeru D)
Date: Mon, 5 Aug 2019 17:02:02 +0530
Subject: [Freeswitch-users] Unable to start the Freeswitch server
Message-ID: <5d4813b2.1c69fb81.ee975.2315@mx.google.com>

Dear Team,

While starting Free Switch server getting below error.
Not able to find the solution. Please help me to fix the same.

2019-08-05 16:20:23.012205 [ERR] sofia.c:3228 Error Creating SIP UA for profile: internal-ipv6 (sip:mod_sofia@[::1]:5060;transport=udp,tcp) ATTEMPT 3 (RETRY IN 5 SEC)
2019-08-05 16:20:23.012205 [ERR] sofia.c:3238 Error Creating SIP UA for profile: internal-ipv6 (sip:mod_sofia@[::1]:5060;transport=udp,tcp)
The likely causes for this are:
1) Another application is already listening on the specified address.
2) The IP the profile is attempting to bind to is not local to this system.
2019-08-05 16:20:23.012205 [ERR] sofia.c:3228 Error Creating SIP UA for profile: internal (sip:mod_sofia at 183.82.114.188:5060;maddr=10.30.2.118;transport=udp,tcp) ATTEMPT 3 (RETRY IN 5 SEC)
2019-08-05 16:20:23.012205 [ERR] sofia.c:3238 Error Creating SIP UA for profile: internal (sip:mod_sofia at 183.82.114.188:5060;maddr=10.30.2.118;transport=udp,tcp)
The likely causes for this are:
1) Another application is already listening on the specified address.
2) The IP the profile is attempting to bind to is not local to this system.

Sent from Mail for Windows 10

-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.freeswitch.org/pipermail/freeswitch-users/attachments/20190805/56b76aff/attachment.html>

From morbidus at rx900.org  Sat Aug  3 17:27:18 2019
From: morbidus at rx900.org (morbidus at rx900.org)
Date: Sat, 3 Aug 2019 19:27:18 +0200
Subject: [Freeswitch-users] hangup cause / sip cause ?
In-Reply-To: <fb758d55-ce23-315c-e946-328223c3e948@rhizomatica.org>
References: <20190802155112.2fb57fe2@linux>
 <fb758d55-ce23-315c-e946-328223c3e948@rhizomatica.org>
Message-ID: <20190803192718.701a715c@linux>

Hi Keith thanks for the info, I'm using the vanilla 'xml dialplan',
do you think there is something similar (an hangup hook) when not using python nor lua ?

Thank you,
Mike



On Sat, 3 Aug 2019 18:36:24 +0200
Keith <keith at rhizomatica.org> wrote:

> On 02/08/2019 15:51, morbidus at rx900.org wrote:
> > Hi i've wrote some dialplans for billing   
> 
> Hi!
> 
> What are you writing the dialplans in?
> 
> Are you doing billing in a hangup hook?
> 
> I've noticed that when I bridge to two EPs, right after the bridge, (in
> my python dialplan)
> 
> last_bridge_hangup_cause has the hup  cause of the first EP, (that failed)
> 
> while in the hangup hook, last_bridge_hangup_cause has the "correct"
> value, that is to say, the one from the EP that connected.
> 
> Hope it helps.
> 
> k/
> 
> 

From Elliot.Journeaux at hihi.co.uk  Tue Aug  6 08:00:53 2019
From: Elliot.Journeaux at hihi.co.uk (Elliot Journeaux)
Date: Tue, 6 Aug 2019 08:00:53 +0000
Subject: [Freeswitch-users] Transcoding Bandwidth parameters
In-Reply-To: <CAGvJV4p9zaMkQTmmj=m=Q0R=mNL+mbujbksQgZRmU8ho3H-D=A@mail.gmail.com>
References: <702882b9-123e-4fa0-b72d-326c2c9fa400.e64a0c44-445d-485e-9afa-30daf69f6122.6d84b303-c56a-4023-bc47-0ca13a77e124@emailsignatures365.codetwo.com>
 <LNXP123MB2586E388D9DDA15F30E21F7AB4DC0@LNXP123MB2586.GBRP123.PROD.OUTLOOK.COM>
 <CAGvJV4p9zaMkQTmmj=m=Q0R=mNL+mbujbksQgZRmU8ho3H-D=A@mail.gmail.com>
Message-ID: <LNXP123MB25863A0FA183DC7D8224C8E0B4D50@LNXP123MB2586.GBRP123.PROD.OUTLOOK.COM>

Hi,

Thanks for getting back to me! I’ve already removed all these settings and there are no Pre-process for this in any other dial plans. Do you know where else could be keeping this value?

Thanks,
Elliot



Elliot Journeaux
UC Engineer

T       0330 058 0000
D       01202 592311
E       Elliot.Journeaux at hihi.co.uk
[http://www.4com.co.uk/signature/HiHi.jpg]<http://hihi.co.uk/>
HiHi.co.uk<http://hihi.co.uk>

HiHi Ltd
One Lansdowne Plaza, 24 Christchurch Road, Bournemouth, Dorset BH1 3NE




This message contains confidential information and is intended only for the individual named. Our company accepts no liability for the content of this email, or for the consequences of any actions taken on the basis of the information provided. Please note that any views or opinions presented in this email are solely those of the author and do not necessarily represent those of the company. If you are not the named addressee you should not disseminate, distribute or copy this e-mail. If you are not the intended recipient you are notified that disclosing, copying, distributing or taking any action in reliance on the contents of this information is strictly prohibited. If you have received this email in error please notify the system manager or the sender immediately and delete this e-mail from your system. E-mail transmission cannot be guaranteed to be secure or error-free as information could be intercepted, corrupted, lost, destroyed, arrive late or incomplete, or contain viruses. The sender therefore does not accept liability for any errors or omissions in the contents of this message or any damage caused by any virus, which arise as a result of e-mail transmission. The recipient should check this email and any attachments for the presence of viruses.

From: FreeSWITCH-users <freeswitch-users-bounces at lists.freeswitch.org> On Behalf Of Dragos Oancea
Sent: 01 August 2019 10:05
To: FreeSWITCH Users Help <freeswitch-users at lists.freeswitch.org>
Subject: Re: [Freeswitch-users] Transcoding Bandwidth parameters

Try to change these in vars.xml:

  <!-- Video Settings -->
  <!-- Setting the max bandwdith -->
  <X-PRE-PROCESS cmd="set" data="rtp_video_max_bandwidth_in=1mb"/>
  <X-PRE-PROCESS cmd="set" data="rtp_video_max_bandwidth_out=1mb"/>



On Wed, Jul 31, 2019 at 1:43 PM Elliot Journeaux <Elliot.Journeaux at hihi.co.uk<mailto:Elliot.Journeaux at hihi.co.uk>> wrote:
Hi,

I’ve noticed when transcoding freeswitch sets a default max bandwidth to 1mb (b=AS:1024). Why is this? And is this configurable?

Thanks,
Elliot


Elliot Journeaux
UC Engineer

T

0330 058 0000

D

01202 592311

E

Elliot.Journeaux at hihi.co.uk<mailto:Elliot.Journeaux at hihi.co.uk>


[http://www.4com.co.uk/signature/HiHi.jpg]<http://hihi.co.uk/>

HiHi.co.uk<http://hihi.co.uk>


HiHi Ltd
One Lansdowne Plaza, 24 Christchurch Road, Bournemouth, Dorset BH1 3NE





This message contains confidential information and is intended only for the individual named. Our company accepts no liability for the content of this email, or for the consequences of any actions taken on the basis of the information provided. Please note that any views or opinions presented in this email are solely those of the author and do not necessarily represent those of the company. If you are not the named addressee you should not disseminate, distribute or copy this e-mail. If you are not the intended recipient you are notified that disclosing, copying, distributing or taking any action in reliance on the contents of this information is strictly prohibited. If you have received this email in error please notify the system manager or the sender immediately and delete this e-mail from your system. E-mail transmission cannot be guaranteed to be secure or error-free as information could be intercepted, corrupted, lost, destroyed, arrive late or incomplete, or contain viruses. The sender therefore does not accept liability for any errors or omissions in the contents of this message or any damage caused by any virus, which arise as a result of e-mail transmission. The recipient should check this email and any attachments for the presence of viruses.

_________________________________________________________________________

The FreeSWITCH project is sponsored by SignalWire https://signalwire.com
Enhance your FreeSWITCH install with disruptive priced SMS and PSTN services.
Build your next product on our scalable cloud platform.

Join our online community to chat in real time https://signalwire.community

Professional FreeSWITCH Services
sales at freeswitch.com<mailto:sales at freeswitch.com>
https://freeswitch.com

Official FreeSWITCH Sites
https://freeswitch.com/oss
https://freeswitch.org/confluence
https://cluecon.com

FreeSWITCH-users mailing list
FreeSWITCH-users at lists.freeswitch.org<mailto:FreeSWITCH-users at lists.freeswitch.org>
http://lists.freeswitch.org/mailman/listinfo/freeswitch-users
UNSUBSCRIBE:http://lists.freeswitch.org/mailman/options/freeswitch-users
https://freeswitch.com
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.freeswitch.org/pipermail/freeswitch-users/attachments/20190806/c12f8da2/attachment-0001.html>

From david.villasmil.work at gmail.com  Sat Aug 10 22:38:45 2019
From: david.villasmil.work at gmail.com (David Villasmil)
Date: Sat, 10 Aug 2019 23:38:45 +0100
Subject: [Freeswitch-users] Unable to start the Freeswitch server
In-Reply-To: <5d4813b2.1c69fb81.ee975.2315@mx.google.com>
References: <5d4813b2.1c69fb81.ee975.2315@mx.google.com>
Message-ID: <CAFGRPVqhw5==8GejePFsSAaTd1ogmt_fCTFymb67=+F__du1xg@mail.gmail.com>

You may want to check there are no other applications listening on ports
5060 and/or 5080.

Also check permissions.

That error comes up where freeswitch can’t bind to the listening ports
(5060-5080)

On Sat, 10 Aug 2019 at 22:14, Veeru D <dandamudiveeru at gmail.com> wrote:

> Dear Team,
>
>
>
> While starting Free Switch server getting below error.
>
> Not able to find the solution. Please help me to fix the same.
>
>
>
> 2019-08-05 16:20:23.012205 [ERR] sofia.c:3228 *Error Creating SIP UA for
> profile: internal-ipv6 (sip:mod_sofia@[::1]:5060;transport=udp,tcp)*
> ATTEMPT 3 (RETRY IN 5 SEC)
>
> 2019-08-05 16:20:23.012205 [ERR] sofia.c:3238 *Error Creating SIP UA for
> profile: internal-ipv6 (sip:mod_sofia@[::1]:5060;transport=udp,tcp*)
>
> The likely causes for this are:
>
> *1) Another application is already listening on the specified address.*
>
> *2) The IP the profile is attempting to bind to is not local to this
> system.*
>
> 2019-08-05 16:20:23.012205 [ERR] sofia.c:3228 Error Creating SIP UA for
> profile: internal (sip:mod_sofia at 183.82.114.188:5060;maddr=10.30.2.118;transport=udp,tcp)
> ATTEMPT 3 (RETRY IN 5 SEC)
>
> 2019-08-05 16:20:23.012205 [ERR] sofia.c:3238 Error Creating SIP UA for
> profile: internal (sip:mod_sofia at 183.82.114.188:5060
> ;maddr=10.30.2.118;transport=udp,tcp)
>
> The likely causes for this are:
>
> 1) Another application is already listening on the specified address.
>
> 2) The IP the profile is attempting to bind to is not local to this system.
>
>
>
> Sent from Mail <https://go.microsoft.com/fwlink/?LinkId=550986> for
> Windows 10
>
>
> _________________________________________________________________________
>
> The FreeSWITCH project is sponsored by SignalWire https://signalwire.com
> Enhance your FreeSWITCH install with disruptive priced SMS and PSTN
> services.
> Build your next product on our scalable cloud platform.
>
> Join our online community to chat in real time
> https://signalwire.community
>
> Professional FreeSWITCH Services
> sales at freeswitch.com
> https://freeswitch.com
>
> Official FreeSWITCH Sites
> https://freeswitch.com/oss
> https://freeswitch.org/confluence
> https://cluecon.com
>
> FreeSWITCH-users mailing list
> FreeSWITCH-users at lists.freeswitch.org
> http://lists.freeswitch.org/mailman/listinfo/freeswitch-users
> UNSUBSCRIBE:http://lists.freeswitch.org/mailman/options/freeswitch-users
> https://freeswitch.com

-- 
Regards,

David Villasmil
email: david.villasmil.work at gmail.com
phone: +34669448337
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.freeswitch.org/pipermail/freeswitch-users/attachments/20190810/3f70ad8e/attachment.html>

From bipin at xbipin.com  Sun Aug 11 05:11:07 2019
From: bipin at xbipin.com (Bipin Patel)
Date: Sun, 11 Aug 2019 09:11:07 +0400
Subject: [Freeswitch-users] Unable to start the Freeswitch server
In-Reply-To: <5d4813b2.1c69fb81.ee975.2315@mx.google.com>
References: <5d4813b2.1c69fb81.ee975.2315@mx.google.com>
Message-ID: <4dd96b3ab2efd5cff06d00b00116f8ce@xbipin.com>

hi, 

this also happens if you enabled TLS port and dont have certs in the
directory, i recently came across this recently 

On 05-08-2019 15:32, Veeru D wrote:

> Dear Team, 
> 
> While starting Free Switch server getting below error. 
> 
> Not able to find the solution. Please help me to fix the same. 
> 
> 2019-08-05 16:20:23.012205 [ERR] sofia.c:3228 ERROR CREATING SIP UA FOR PROFILE: INTERNAL-IPV6 (SIP:MOD_SOFIA@[::1]:5060;TRANSPORT=UDP,TCP) ATTEMPT 3 (RETRY IN 5 SEC) 
> 
> 2019-08-05 16:20:23.012205 [ERR] sofia.c:3238 ERROR CREATING SIP UA FOR PROFILE: INTERNAL-IPV6 (SIP:MOD_SOFIA@[::1]:5060;TRANSPORT=UDP,TCP) 
> 
> The likely causes for this are: 
> 
> 1) ANOTHER APPLICATION IS ALREADY LISTENING ON THE SPECIFIED ADDRESS. 
> 
> 2) THE IP THE PROFILE IS ATTEMPTING TO BIND TO IS NOT LOCAL TO THIS SYSTEM. 
> 
> 2019-08-05 16:20:23.012205 [ERR] sofia.c:3228 Error Creating SIP UA for profile: internal (sip:mod_sofia at 183.82.114.188:5060;maddr=10.30.2.118;transport=udp,tcp) ATTEMPT 3 (RETRY IN 5 SEC) 
> 
> 2019-08-05 16:20:23.012205 [ERR] sofia.c:3238 Error Creating SIP UA for profile: internal (sip:mod_sofia at 183.82.114.188:5060;maddr=10.30.2.118;transport=udp,tcp) 
> 
> The likely causes for this are: 
> 
> 1) Another application is already listening on the specified address. 
> 
> 2) The IP the profile is attempting to bind to is not local to this system. 
> 
> Sent from Mail [1] for Windows 10 
> 
> _________________________________________________________________________
> 
> The FreeSWITCH project is sponsored by SignalWire https://signalwire.com
> Enhance your FreeSWITCH install with disruptive priced SMS and PSTN services.
> Build your next product on our scalable cloud platform.
> 
> Join our online community to chat in real time https://signalwire.community
> 
> Professional FreeSWITCH Services
> sales at freeswitch.com
> https://freeswitch.com
> 
> Official FreeSWITCH Sites
> https://freeswitch.com/oss
> https://freeswitch.org/confluence
> https://cluecon.com
> 
> FreeSWITCH-users mailing list
> FreeSWITCH-users at lists.freeswitch.org
> http://lists.freeswitch.org/mailman/listinfo/freeswitch-users
> UNSUBSCRIBE:http://lists.freeswitch.org/mailman/options/freeswitch-users
> https://freeswitch.com

 

Links:
------
[1] https://go.microsoft.com/fwlink/?LinkId=550986
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.freeswitch.org/pipermail/freeswitch-users/attachments/20190811/f8082e3b/attachment.html>

From dragos at freeswitch.org  Mon Aug 12 18:17:54 2019
From: dragos at freeswitch.org (Dragos Oancea)
Date: Mon, 12 Aug 2019 19:17:54 +0100
Subject: [Freeswitch-users] Transcoding Bandwidth parameters
In-Reply-To: <LNXP123MB25863A0FA183DC7D8224C8E0B4D50@LNXP123MB2586.GBRP123.PROD.OUTLOOK.COM>
References: <702882b9-123e-4fa0-b72d-326c2c9fa400.e64a0c44-445d-485e-9afa-30daf69f6122.6d84b303-c56a-4023-bc47-0ca13a77e124@emailsignatures365.codetwo.com>
 <LNXP123MB2586E388D9DDA15F30E21F7AB4DC0@LNXP123MB2586.GBRP123.PROD.OUTLOOK.COM>
 <CAGvJV4p9zaMkQTmmj=m=Q0R=mNL+mbujbksQgZRmU8ho3H-D=A@mail.gmail.com>
 <LNXP123MB25863A0FA183DC7D8224C8E0B4D50@LNXP123MB2586.GBRP123.PROD.OUTLOOK.COM>
Message-ID: <CAGvJV4pUHHrpMu7pedw61ERjp-x7Q35n_-JqGecbJHeRULEVMA@mail.gmail.com>

There's also a param called video-codec-bandwidth that defaults to 1MB in
the conference profile.

https://freeswitch.org/confluence/display/FREESWITCH/mod_conference


On Sat, Aug 10, 2019 at 10:16 PM Elliot Journeaux <
Elliot.Journeaux at hihi.co.uk> wrote:

> Hi,
>
>
>
> Thanks for getting back to me! I’ve already removed all these settings and
> there are no Pre-process for this in any other dial plans. Do you know
> where else could be keeping this value?
>
>
>
> Thanks,
>
> Elliot
>
>
> Elliot Journeaux
> UC Engineer
> T 0330 058 0000
> D 01202 592311
> E Elliot.Journeaux at hihi.co.uk [image: 4Com] <http://hihi.co.uk/>
> HiHi.co.uk <http://hihi.co.uk>
> HiHi Ltd
> One Lansdowne Plaza, 24 Christchurch Road, Bournemouth, Dorset BH1 3NE
>
> This message contains confidential information and is intended only for
> the individual named. Our company accepts no liability for the content of
> this email, or for the consequences of any actions taken on the basis of
> the information provided. Please note that any views or opinions presented
> in this email are solely those of the author and do not necessarily
> represent those of the company. If you are not the named addressee you
> should not disseminate, distribute or copy this e-mail. If you are not the
> intended recipient you are notified that disclosing, copying, distributing
> or taking any action in reliance on the contents of this information is
> strictly prohibited. If you have received this email in error please notify
> the system manager or the sender immediately and delete this e-mail from
> your system. E-mail transmission cannot be guaranteed to be secure or
> error-free as information could be intercepted, corrupted, lost, destroyed,
> arrive late or incomplete, or contain viruses. The sender therefore does
> not accept liability for any errors or omissions in the contents of this
> message or any damage caused by any virus, which arise as a result of
> e-mail transmission. The recipient should check this email and any
> attachments for the presence of viruses.
>
> *From:* FreeSWITCH-users <freeswitch-users-bounces at lists.freeswitch.org> *On
> Behalf Of *Dragos Oancea
> *Sent:* 01 August 2019 10:05
> *To:* FreeSWITCH Users Help <freeswitch-users at lists.freeswitch.org>
> *Subject:* Re: [Freeswitch-users] Transcoding Bandwidth parameters
>
>
>
> Try to change these in vars.xml:
>
>
>
>   <!-- Video Settings -->
>   <!-- Setting the max bandwdith -->
>   <X-PRE-PROCESS cmd="set" data="rtp_video_max_bandwidth_in=1mb"/>
>   <X-PRE-PROCESS cmd="set" data="rtp_video_max_bandwidth_out=1mb"/>
>
>
>
>
>
>
>
> On Wed, Jul 31, 2019 at 1:43 PM Elliot Journeaux <
> Elliot.Journeaux at hihi.co.uk> wrote:
>
> Hi,
>
>
>
> I’ve noticed when transcoding freeswitch sets a default max bandwidth to
> 1mb (b=AS:1024). Why is this? And is this configurable?
>
>
>
> Thanks,
>
> Elliot
>
> *Elliot Journeaux*
> *UC Engineer*
>
> T
>
> 0330 058 0000
>
> D
>
> 01202 592311
>
> E
>
> Elliot.Journeaux at hihi.co.uk
>
> [image: 4Com] <http://hihi.co.uk/>
>
> HiHi.co.uk <http://hihi.co.uk>
>
> HiHi Ltd
> One Lansdowne Plaza, 24 Christchurch Road, Bournemouth, Dorset BH1 3NE
>
> This message contains confidential information and is intended only for
> the individual named. Our company accepts no liability for the content of
> this email, or for the consequences of any actions taken on the basis of
> the information provided. Please note that any views or opinions presented
> in this email are solely those of the author and do not necessarily
> represent those of the company. If you are not the named addressee you
> should not disseminate, distribute or copy this e-mail. If you are not the
> intended recipient you are notified that disclosing, copying, distributing
> or taking any action in reliance on the contents of this information is
> strictly prohibited. If you have received this email in error please notify
> the system manager or the sender immediately and delete this e-mail from
> your system. E-mail transmission cannot be guaranteed to be secure or
> error-free as information could be intercepted, corrupted, lost, destroyed,
> arrive late or incomplete, or contain viruses. The sender therefore does
> not accept liability for any errors or omissions in the contents of this
> message or any damage caused by any virus, which arise as a result of
> e-mail transmission. The recipient should check this email and any
> attachments for the presence of viruses.
>
> _________________________________________________________________________
>
> The FreeSWITCH project is sponsored by SignalWire https://signalwire.com
> Enhance your FreeSWITCH install with disruptive priced SMS and PSTN
> services.
> Build your next product on our scalable cloud platform.
>
> Join our online community to chat in real time
> https://signalwire.community
>
> Professional FreeSWITCH Services
> sales at freeswitch.com
> https://freeswitch.com
>
> Official FreeSWITCH Sites
> https://freeswitch.com/oss
> https://freeswitch.org/confluence
> https://cluecon.com
>
> FreeSWITCH-users mailing list
> FreeSWITCH-users at lists.freeswitch.org
> http://lists.freeswitch.org/mailman/listinfo/freeswitch-users
> UNSUBSCRIBE:http://lists.freeswitch.org/mailman/options/freeswitch-users
> https://freeswitch.com
>
> _________________________________________________________________________
>
> The FreeSWITCH project is sponsored by SignalWire https://signalwire.com
> Enhance your FreeSWITCH install with disruptive priced SMS and PSTN
> services.
> Build your next product on our scalable cloud platform.
>
> Join our online community to chat in real time
> https://signalwire.community
>
> Professional FreeSWITCH Services
> sales at freeswitch.com
> https://freeswitch.com
>
> Official FreeSWITCH Sites
> https://freeswitch.com/oss
> https://freeswitch.org/confluence
> https://cluecon.com
>
> FreeSWITCH-users mailing list
> FreeSWITCH-users at lists.freeswitch.org
> http://lists.freeswitch.org/mailman/listinfo/freeswitch-users
> UNSUBSCRIBE:http://lists.freeswitch.org/mailman/options/freeswitch-users
> https://freeswitch.com
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.freeswitch.org/pipermail/freeswitch-users/attachments/20190812/08568032/attachment.html>

From anton.olofsson at briteback.com  Mon Aug 12 12:36:02 2019
From: anton.olofsson at briteback.com (Anton Olofsson)
Date: Mon, 12 Aug 2019 14:36:02 +0200
Subject: [Freeswitch-users] Changing a client's local streams (devices) in
	Verto client
Message-ID: <CAMxuy68okBVUDU38GPyTS8Kda0ykqHw+AaGBP3tcTP0SYK5Ocw@mail.gmail.com>

Does Verto allow for clients' streams to be changed during a call? I'm
trying to add the ability for users to change their microphone whilst in a
call. When looking at the source code for the Verto client, I see that
streams are only read when starting a call. Would it be possible to add
additional handling of adding and removing streams to the client, or is
there a limitation in mod_verto which restricts this?

Thanks,
Anton Olofsson
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.freeswitch.org/pipermail/freeswitch-users/attachments/20190812/cc5331a1/attachment-0001.html>

From joe at expert.net  Tue Aug 13 11:44:21 2019
From: joe at expert.net (Joseph Barrero)
Date: Tue, 13 Aug 2019 07:44:21 -0400
Subject: [Freeswitch-users] mod_sms questions
In-Reply-To: <BN6PR0101MB28503FD188C2A71D57A2B62EBBC00@BN6PR0101MB2850.prod.exchangelabs.com>
References: <BN6PR0101MB28505525FA047F9E452166F3BBC40@BN6PR0101MB2850.prod.exchangelabs.com>
 <BN6PR0101MB28503FD188C2A71D57A2B62EBBC00@BN6PR0101MB2850.prod.exchangelabs.com>
Message-ID: <CAGAa33tLHiAMg1=eQTCT881cPNg_FE+XHaeU=Nh5=wHT5p6T7g@mail.gmail.com>

Yes and no.  Mod_SMS is a module that facilitates SIP SIMPLE MESSAGING.
Simply creating a chatplan as described in the documentation will provide a
mechanism to send and receive messages between registered devices/agents.
To receive and send messages outside of Freeswitch to and from external
entities such as VoipInn, you'll need to create your own apps that
interface with the FreeSWITCH ESL (generally for incoming) and your own
routing mechanism to send outbound SMS messages to VoipInn.


On Fri, Jul 26, 2019 at 11:27 AM Sean Devoy <sdevoy at bizfocused.com> wrote:

> Based on the lack of any response, can I assume SMS Texting is just a
> feature FreeSwitch does not support (at this time)?  My customer uses Bria
> softphone and needs SMS Text.
>
>
>
> Thanks,
>
> Sean
>
>
>
> *From:* FreeSWITCH-users <freeswitch-users-bounces at lists.freeswitch.org> *On
> Behalf Of *Sean Devoy
> *Sent:* Monday, July 22, 2019 5:11 PM
> *To:* FreeSWITCH Users Help <freeswitch-users at lists.freeswitch.org>
> *Subject:* [Freeswitch-users] mod_sms questions
>
>
>
> Hi,
>
> I have found information on mod_sms to be limited.
>
>
>
> Our provider (Voip Innovations) supports SMS on our DIDs.  Here is their
> document explaining handling options.
>
> https://backoffice.voipinnovations.com/Wiki/View.aspx?article=SMS
>
>
>
> Our client is using Bria Softphone (on Android and iPhone).  I assume this
> is to mask her true cell phone number/identity.
>
>
>
> Can FreeSwitch route incoming SMS messages on DIDs to specific
> extensions/registrations?  And route from an extension out?
>
>
>
> Any documentation hints would be greatly appreciated.
>
> Thanks,
>
> Sean
>
>
>
>
> _________________________________________________________________________
>
> The FreeSWITCH project is sponsored by SignalWire https://signalwire.com
> Enhance your FreeSWITCH install with disruptive priced SMS and PSTN
> services.
> Build your next product on our scalable cloud platform.
>
> Join our online community to chat in real time
> https://signalwire.community
>
> Professional FreeSWITCH Services
> sales at freeswitch.com
> https://freeswitch.com
>
> Official FreeSWITCH Sites
> https://freeswitch.com/oss
> https://freeswitch.org/confluence
> https://cluecon.com
>
> FreeSWITCH-users mailing list
> FreeSWITCH-users at lists.freeswitch.org
> http://lists.freeswitch.org/mailman/listinfo/freeswitch-users
> UNSUBSCRIBE:http://lists.freeswitch.org/mailman/options/freeswitch-users
> https://freeswitch.com
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.freeswitch.org/pipermail/freeswitch-users/attachments/20190813/4950b366/attachment.html>

From richard at treeboxsolutions.com  Tue Aug 13 12:04:19 2019
From: richard at treeboxsolutions.com (Richard Chan)
Date: Tue, 13 Aug 2019 20:04:19 +0800
Subject: [Freeswitch-users] Freeswitch team: thanks for RPMs 1.10
Message-ID: <CAMXXUikucET9ew1OWoWexifi77uO=RCZmnk6ZyPK2Bry4Jus4w@mail.gmail.com>

Dear FreeSWITCH Team


Many thanks for 1.10 and the RHEL/CentOS 7 packaging.
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.freeswitch.org/pipermail/freeswitch-users/attachments/20190813/394eaf8c/attachment.html>

From nathan at robotics.net  Wed Aug 14 10:35:42 2019
From: nathan at robotics.net (Nathan Stratton)
Date: Wed, 14 Aug 2019 06:35:42 -0400
Subject: [Freeswitch-users] Freeswitch team: thanks for RPMs 1.10
In-Reply-To: <CAMXXUikucET9ew1OWoWexifi77uO=RCZmnk6ZyPK2Bry4Jus4w@mail.gmail.com>
References: <CAMXXUikucET9ew1OWoWexifi77uO=RCZmnk6ZyPK2Bry4Jus4w@mail.gmail.com>
Message-ID: <CAHubkyMsPdZVOeT1n9u5u8zyd_VpcuZtZcBp1c2Gcs8Lfj9Wmg@mail.gmail.com>

+1

><>
nathan stratton


On Tue, Aug 13, 2019 at 8:41 AM Richard Chan <richard at treeboxsolutions.com>
wrote:

> Dear FreeSWITCH Team
>
>
> Many thanks for 1.10 and the RHEL/CentOS 7 packaging.
>
>
> _________________________________________________________________________
>
> The FreeSWITCH project is sponsored by SignalWire https://signalwire.com
> Enhance your FreeSWITCH install with disruptive priced SMS and PSTN
> services.
> Build your next product on our scalable cloud platform.
>
> Join our online community to chat in real time
> https://signalwire.community
>
> Professional FreeSWITCH Services
> sales at freeswitch.com
> https://freeswitch.com
>
> Official FreeSWITCH Sites
> https://freeswitch.com/oss
> https://freeswitch.org/confluence
> https://cluecon.com
>
> FreeSWITCH-users mailing list
> FreeSWITCH-users at lists.freeswitch.org
> http://lists.freeswitch.org/mailman/listinfo/freeswitch-users
> UNSUBSCRIBE:http://lists.freeswitch.org/mailman/options/freeswitch-users
> https://freeswitch.com
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.freeswitch.org/pipermail/freeswitch-users/attachments/20190814/39865fce/attachment.html>

From bilaln018 at gmail.com  Thu Aug 15 12:56:26 2019
From: bilaln018 at gmail.com (Bilal Abbasi)
Date: Thu, 15 Aug 2019 17:56:26 +0500
Subject: [Freeswitch-users] [unable to compile freeswitch on debian 10]
Message-ID: <CADSVerBEjQ8sxkpJHvHeY9xwngNkqgNiTrkHsfSCkqQa+iS2kQ@mail.gmail.com>

Hi Users,
I am unable to build freeswich on debain 10(buster) freeswitch version
1.10, here are the error i get.

making all mod_http_cache
make[4]: Entering directory
'/usr/src/freeswitch/src/mod/applications/mod_http_cache'
Making all in .
make[5]: Entering directory
'/usr/src/freeswitch/src/mod/applications/mod_http_cache'
  CC       mod_http_cache_la-mod_http_cache.lo
mod_http_cache.c: In function ‘cached_url_filename_create.isra.4’:
mod_http_cache.c:988:2: error: ‘strncpy’ output may be truncated copying 2
bytes from a string of length 256 [-Werror=stringop-truncation]
  strncpy(uuid_dir, uuid_str, 2);
  ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
mod_http_cache.c:988:2: error: ‘strncpy’ output may be truncated copying 2
bytes from a string of length 256 [-Werror=stringop-truncation]
In function ‘parse_domain.constprop’,
    inlined from ‘url_cache_http_profile_find_by_fqdn.part.2.constprop’ at
mod_http_cache.c:929:3:
mod_http_cache.c:276:2: error: ‘strncpy’ specified bound 255 equals
destination size [-Werror=stringop-truncation]
  strncpy(domain_buf, start, domain_buf_len);
  ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
cc1: all warnings being treated as errors
make[5]: *** [Makefile:761: mod_http_cache_la-mod_http_cache.lo] Error 1
make[5]: Leaving directory
'/usr/src/freeswitch/src/mod/applications/mod_http_cache'
make[4]: *** [Makefile:801: all-recursive] Error 1
make[4]: Leaving directory
'/usr/src/freeswitch/src/mod/applications/mod_http_cache'
make[3]: *** [Makefile:704: mod_http_cache-all] Error 1
make[3]: Leaving directory '/usr/src/freeswitch/src/mod'
make[2]: *** [Makefile:607: all-recursive] Error 1
make[2]: Leaving directory '/usr/src/freeswitch/src'
make[1]: *** [Makefile:3736: all-recursive] Error 1
make[1]: Leaving directory '/usr/src/freeswitch'
make: *** [Makefile:1445: all] Error 2

Regards
Abbasi
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.freeswitch.org/pipermail/freeswitch-users/attachments/20190815/f88ea0c8/attachment.html>

From brian at freeswitch.com  Thu Aug 15 14:30:22 2019
From: brian at freeswitch.com (Brian West)
Date: Thu, 15 Aug 2019 09:30:22 -0500
Subject: [Freeswitch-users] [unable to compile freeswitch on debian 10]
In-Reply-To: <CADSVerBEjQ8sxkpJHvHeY9xwngNkqgNiTrkHsfSCkqQa+iS2kQ@mail.gmail.com>
References: <CADSVerBEjQ8sxkpJHvHeY9xwngNkqgNiTrkHsfSCkqQa+iS2kQ@mail.gmail.com>
Message-ID: <CAEJMVkDBHWQF0-JKbL7i0wbvGY70M3ZQPgUyTb1ELQJYsnMpdg@mail.gmail.com>

Please search JIRA, if the issue isn't filed, file it please.

Thanks,
Brian

On Thu, Aug 15, 2019 at 7:57 AM Bilal Abbasi <bilaln018 at gmail.com> wrote:

> Hi Users,
> I am unable to build freeswich on debain 10(buster) freeswitch version
> 1.10, here are the error i get.
>
> making all mod_http_cache
> make[4]: Entering directory
> '/usr/src/freeswitch/src/mod/applications/mod_http_cache'
> Making all in .
> make[5]: Entering directory
> '/usr/src/freeswitch/src/mod/applications/mod_http_cache'
>   CC       mod_http_cache_la-mod_http_cache.lo
> mod_http_cache.c: In function ‘cached_url_filename_create.isra.4’:
> mod_http_cache.c:988:2: error: ‘strncpy’ output may be truncated copying 2
> bytes from a string of length 256 [-Werror=stringop-truncation]
>   strncpy(uuid_dir, uuid_str, 2);
>   ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
> mod_http_cache.c:988:2: error: ‘strncpy’ output may be truncated copying 2
> bytes from a string of length 256 [-Werror=stringop-truncation]
> In function ‘parse_domain.constprop’,
>     inlined from ‘url_cache_http_profile_find_by_fqdn.part.2.constprop’ at
> mod_http_cache.c:929:3:
> mod_http_cache.c:276:2: error: ‘strncpy’ specified bound 255 equals
> destination size [-Werror=stringop-truncation]
>   strncpy(domain_buf, start, domain_buf_len);
>   ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
> cc1: all warnings being treated as errors
> make[5]: *** [Makefile:761: mod_http_cache_la-mod_http_cache.lo] Error 1
> make[5]: Leaving directory
> '/usr/src/freeswitch/src/mod/applications/mod_http_cache'
> make[4]: *** [Makefile:801: all-recursive] Error 1
> make[4]: Leaving directory
> '/usr/src/freeswitch/src/mod/applications/mod_http_cache'
> make[3]: *** [Makefile:704: mod_http_cache-all] Error 1
> make[3]: Leaving directory '/usr/src/freeswitch/src/mod'
> make[2]: *** [Makefile:607: all-recursive] Error 1
> make[2]: Leaving directory '/usr/src/freeswitch/src'
> make[1]: *** [Makefile:3736: all-recursive] Error 1
> make[1]: Leaving directory '/usr/src/freeswitch'
> make: *** [Makefile:1445: all] Error 2
>
> Regards
> Abbasi
> _________________________________________________________________________
>
> The FreeSWITCH project is sponsored by SignalWire https://signalwire.com
> Enhance your FreeSWITCH install with disruptive priced SMS and PSTN
> services.
> Build your next product on our scalable cloud platform.
>
> Join our online community to chat in real time
> https://signalwire.community
>
> Professional FreeSWITCH Services
> sales at freeswitch.com
> https://freeswitch.com
>
> Official FreeSWITCH Sites
> https://freeswitch.com/oss
> https://freeswitch.org/confluence
> https://cluecon.com
>
> FreeSWITCH-users mailing list
> FreeSWITCH-users at lists.freeswitch.org
> http://lists.freeswitch.org/mailman/listinfo/freeswitch-users
> UNSUBSCRIBE:http://lists.freeswitch.org/mailman/options/freeswitch-users
> https://freeswitch.com



-- 

Brian West | Co-founder and Developer

Need Commercial support? email sales at freeswitch.com

FreeSWITCH Solutions | 17345 Civic Drive #2531 Brookfield, WI 53045
<https://maps.google.com/?q=17345+Civic+Drive+%232531+Brookfield,+WI+53045&entry=gmail&source=g>

Email: brian at freeswitch.com

Mobile: 918-424-9378

Website: https://www.FreeSWITCH.com <https://www.freeswitch.com/>

[image: https://www.facebook.com/signalwireinc?src=email]
<https://www.facebook.com/freeswitch> [image:
https://twitter.com/freeswitch] <https://twitter.com/freeswitch>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.freeswitch.org/pipermail/freeswitch-users/attachments/20190815/9eb6f64c/attachment.html>

From mrjoli021 at gmail.com  Thu Aug 15 15:20:42 2019
From: mrjoli021 at gmail.com (Joli Martinez)
Date: Thu, 15 Aug 2019 11:20:42 -0400
Subject: [Freeswitch-users] adding modules
Message-ID: <CANeteieXZCoGnm2YwMDJVSYM_x+Ro5n+VAU62v3prGeN3mP-8A@mail.gmail.com>

I know that I can add modules on compiled FreeSWITCH and there are
instructions for that.  What I don't find is how to add a module when
installed from binary.  I am running Debian 9 and installed FreeSWITCH with
apt.

how do I install a module?  I am looking primarily for sms_flowroute module
to enable sms messaging.

thanks,
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.freeswitch.org/pipermail/freeswitch-users/attachments/20190815/8ac24f01/attachment.html>

From brian at freeswitch.com  Thu Aug 15 16:45:38 2019
From: brian at freeswitch.com (Brian West)
Date: Thu, 15 Aug 2019 11:45:38 -0500
Subject: [Freeswitch-users] adding modules
In-Reply-To: <CANeteieXZCoGnm2YwMDJVSYM_x+Ro5n+VAU62v3prGeN3mP-8A@mail.gmail.com>
References: <CANeteieXZCoGnm2YwMDJVSYM_x+Ro5n+VAU62v3prGeN3mP-8A@mail.gmail.com>
Message-ID: <CAEJMVkB_5XuWvSo+Yc+5yew6_zhD6uJ7n2Tpd+hH7xObD3MbNg@mail.gmail.com>

What binary module are you installing?

/b


On Thu, Aug 15, 2019 at 10:21 AM Joli Martinez <mrjoli021 at gmail.com> wrote:

> I know that I can add modules on compiled FreeSWITCH and there are
> instructions for that.  What I don't find is how to add a module when
> installed from binary.  I am running Debian 9 and installed FreeSWITCH with
> apt.
>
> how do I install a module?  I am looking primarily for sms_flowroute
> module to enable sms messaging.
>
> thanks,
> _________________________________________________________________________
>
> The FreeSWITCH project is sponsored by SignalWire https://signalwire.com
> Enhance your FreeSWITCH install with disruptive priced SMS and PSTN
> services.
> Build your next product on our scalable cloud platform.
>
> Join our online community to chat in real time
> https://signalwire.community
>
> Professional FreeSWITCH Services
> sales at freeswitch.com
> https://freeswitch.com
>
> Official FreeSWITCH Sites
> https://freeswitch.com/oss
> https://freeswitch.org/confluence
> https://cluecon.com
>
> FreeSWITCH-users mailing list
> FreeSWITCH-users at lists.freeswitch.org
> http://lists.freeswitch.org/mailman/listinfo/freeswitch-users
> UNSUBSCRIBE:http://lists.freeswitch.org/mailman/options/freeswitch-users
> https://freeswitch.com



-- 

Brian West | Co-founder and Developer

Need Commercial support? email sales at freeswitch.com

FreeSWITCH Solutions | 17345 Civic Drive #2531 Brookfield, WI 53045
<https://maps.google.com/?q=17345+Civic+Drive+%232531+Brookfield,+WI+53045&entry=gmail&source=g>

Email: brian at freeswitch.com

Mobile: 918-424-9378

Website: https://www.FreeSWITCH.com <https://www.freeswitch.com/>

[image: https://www.facebook.com/signalwireinc?src=email]
<https://www.facebook.com/freeswitch> [image:
https://twitter.com/freeswitch] <https://twitter.com/freeswitch>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.freeswitch.org/pipermail/freeswitch-users/attachments/20190815/8e4df186/attachment-0001.html>

From victor.chukalovskiy at gmail.com  Thu Aug 15 15:29:06 2019
From: victor.chukalovskiy at gmail.com (Victor Chukalovskiy)
Date: Thu, 15 Aug 2019 11:29:06 -0400
Subject: [Freeswitch-users] FS gateway over TLS - force ephemeral port in
	contact header
Message-ID: <030ad30c-fe3e-2696-1ccd-43c2acfd3b0a@gmail.com>

Hi Folks, long time away from this list but I do run into another FS 
questions I can't answer myself.

General scenario is latest FS V1.8 registering to Oracle SBC via gateway 
with register-transport TLS, and then trying to send / receive some calls.

Issue I observe is as following:
Registration goes well, as well as outbound call is established (from FS 
to Oracle). So far FS is always an SSL "Client" and SBC is always an SSL 
"Server". So TCP connection is between an ephemeral port e.g 57647 on FS 
side and 5061 on SBC side.

However, when SBC sends a BYE to FS, it does so in a brand new TCP 
socket going from a high range port on SBC side e.g. 27696 and 5061 on 
FS side. In this new connection SBC tries to be an SSL client and expect 
FS to act as SSL server. FS ignores it completely (nothing in debug log 
or in sofia sip trace). My presumption is that it's incorrect, and that 
everything should go back to the port that REGISTER / INVITE came from. 
I thinks SBC does so because of FS contact header not matching the  
actual TCP connection. I'm trying to figure out FS guilt in this, as I 
suspect it happens because of the way FS sets Contact header port on the 
outbound REGISTER and INVITE:

Contact: <sip:gw+test@<freeswitch_ip>:5061;tport=tcp;transport=tls;gw=test>

I suspect that 5061 is not the right port given FS is actually using 
ephemeral port for this registration. Is this a bug I should report, or 
a configuration I can change, or normal?
How can I force FS to put it's actual ephemeral port? So that it looks 
something like this:

Contact: <sip:gw+test@<freeswitch_ip>:57647;tport=tcp;transport=tls;gw=test>

Below is just an illustration of two TCP connections that end-up being 
created on a single outbound call.

FreeSWITCH - initiated REGISTER, INVITE, 100 Trying, 200 OK etc:

11:05:53.303006 IP <freeswitch_ip>.57647 > <sbc_ip>.5061
11:05:53.408646 IP <sbc_ip>.5061 > <freeswitch_ip>.57647
11:05:53.408745 IP <freeswitch_ip>.57647 > <sbc_ip>.5061
11:05:54.242105 IP <freeswitch_ip>.57647 > <sbc_ip>.5061
11:05:54.242307 IP <freeswitch_ip>.57647 > <sbc_ip>.5061
11:05:54.309673 IP <sbc_ip>.5061 > <freeswitch_ip>.57647
11:05:54.309767 IP <freeswitch_ip>.57647 > <sbc_ip>.5061
11:05:54.393547 IP <sbc_ip>.5061 > <freeswitch_ip>.57647
11:05:54.393584 IP <freeswitch_ip>.57647 > <sbc_ip>.5061
11:05:54.394273 IP <freeswitch_ip>.57647 > <sbc_ip>.5061
11:05:54.395283 IP <freeswitch_ip>.57647 > <sbc_ip>.5061
11:05:54.395430 IP <freeswitch_ip>.57647 > <sbc_ip>.5061
11:05:54.395500 IP <freeswitch_ip>.57647 > <sbc_ip>.5061
11:05:54.463197 IP <sbc_ip>.5061 > <freeswitch_ip>.57647
11:05:54.511325 IP <freeswitch_ip>.57647 > <sbc_ip>.5061
11:05:57.283340 IP <sbc_ip>.5061 > <freeswitch_ip>.57647
11:05:57.283498 IP <freeswitch_ip>.57647 > <sbc_ip>.5061
11:06:02.904345 IP <sbc_ip>.5061 > <freeswitch_ip>.57647
11:06:02.904391 IP <freeswitch_ip>.57647 > <sbc_ip>.5061
11:06:02.918036 IP <freeswitch_ip>.57647 > <sbc_ip>.5061
11:06:03.085751 IP <sbc_ip>.5061 > <freeswitch_ip>.57647



Far-end (SBC) initiated "BYE". Note that ports have changed to a new 
set, and ssl server / client roles reversed:
11:06:11.285869 IP <sbc_ip>.27696 > <freeswitch_ip>.5061
11:06:11.285960 IP <freeswitch_ip>.5061 > <sbc_ip>.27696
11:06:11.354400 IP <sbc_ip>.27696 > <freeswitch_ip>.5061
11:06:11.357416 IP <sbc_ip>.27696 > <freeswitch_ip>.5061
11:06:11.357464 IP <freeswitch_ip>.5061 > <sbc_ip>.27696
11:06:11.358337 IP <freeswitch_ip>.5061 > <sbc_ip>.27696
11:06:11.358342 IP <freeswitch_ip>.5061 > <sbc_ip>.27696
11:06:11.426766 IP <sbc_ip>.27696 > <freeswitch_ip>.5061
11:06:11.427018 IP <freeswitch_ip>.5061 > <sbc_ip>.27696
11:06:11.492787 IP <sbc_ip>.27696 > <freeswitch_ip>.5061


Thanks a lot,
-Vic


From tulipa.frigo at gmail.com  Thu Aug 15 15:30:13 2019
From: tulipa.frigo at gmail.com (Tulipa Frigo)
Date: Thu, 15 Aug 2019 12:30:13 -0300
Subject: [Freeswitch-users] Teens Direct Routing - contact and record-route
	headers are missing
Message-ID: <CAJU-n61A6AtNZqtk_-8-FC9OdGiLmJgrGojqKgnRe3kuvYqkZw@mail.gmail.com>

Hi all,

I'm trying to configure my freeswitch to send and receive calls from Teens
Direct Routing . Then, I configured the SIP gateway
/usr/local/freeswitch/sip_profiles/extern/gateway_teens.xml :

<include>
  <gateway name="teens">
  <param name="realm" value="sip.pstnhub.microsoft.com:5061"/>
  <param name="register" value="false"/>
  <param name="register-transport" value="tls"/>
  <param name="ping" value="25"/>
  </gateway>
</include>

The Teens Direct Routing only enable the sip trunk after receive and send
SIP OPTIONS with success, in both direction. The OPTIONS FLOW description
from Direct Routing Configure page,
https://docs.microsoft.com/en-us/microsoftteams/direct-routing-configure:
"The SBC sends a OPTIONS messages to Teens Direct Routing and receives a
200OK. When Direct Routing sees incoming OPTIONS, it will start sending
outgoing SIP Options messages to the SBC FQDN configured in the Contact
header field in the incoming OPTIONS message and the SBC reply with 200OK."

The problem is that the freeswitch (SBC) is receiving the response
FORBIDDEN , with reason :
Q.850;cause=21;text="29175f0d-ebe8-43ea-836f-708b6d4b0d4f;Record-Route and
Contact headers are missing" .

Folowing is the OPTIONS msg sent from freeswitch to Teens Direct Rounting
and the response:

   ------------------------------------------------------------------------
send 597 bytes to tls/[52.114.76.76]:5061 at 11:10:15.890560:
   ------------------------------------------------------------------------
   OPTIONS sip:sip.pstnhub.microsoft.com:5061;transport=tls SIP/2.0
   Via: SIP/2.0/TLS 177.53.17.168:5081;rport;branch=z9hG4bKg5DyZ09c7Bv2r
   Max-Forwards: 70
   From: <sip:sip.pstnhub.microsoft.com:5061>;tag=ge55jU7NBK1rr
   To: <sip:sip.pstnhub.microsoft.com:5061>
   Call-ID: 3f0f42b7-3a09-1238-5e8a-00155d11a606
   CSeq: 8385268 OPTIONS
   User-Agent:
FreeSWITCH-mod_sofia/1.8.6+git~20190606T190249Z~93b4c92e75~64bit
   Allow: INVITE, ACK, BYE, CANCEL, OPTIONS, MESSAGE, INFO, UPDATE,
REGISTER, REFER, NOTIFY
   Supported: timer, path, replaces
   Allow-Events: talk, hold, conference, refer
   Content-Length: 0

   ------------------------------------------------------------------------
recv 545 bytes from tls/[52.114.76.76]:5061 at 11:10:16.070876:
   ------------------------------------------------------------------------
   SIP/2.0 403 Forbidden
   FROM: <sip:sip.pstnhub.microsoft.com:5061>;tag=ge55jU7NBK1rr
   TO: <sip:sip.pstnhub.microsoft.com:5061>
   CSEQ: 8385268 OPTIONS
   CALL-ID: 3f0f42b7-3a09-1238-5e8a-00155d11a606
   VIA: SIP/2.0/TLS 177.53.17.168:5081;branch=z9hG4bKg5DyZ09c7Bv2r;rport
   REASON:
Q.850;cause=21;text="29175f0d-ebe8-43ea-836f-708b6d4b0d4f;Record-Route and
Contact headers are missing"
   CONTENT-LENGTH: 0
   ALLOW: INVITE
   ALLOW: ACK
   ALLOW: OPTIONS
   ALLOW: CANCEL
   ALLOW: BYE
   ALLOW: NOTIFY
   SERVER: Microsoft.PSTNHub.SIPProxy v.2019.7.4.9 i.EUNO.2

   ------------------------------------------------------------------------

How can I add these headers into OPTIONS msg ?

Thanks and Regards

Tulipa Frigo
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.freeswitch.org/pipermail/freeswitch-users/attachments/20190815/1a912815/attachment.html>

From mrjoli021 at gmail.com  Fri Aug 16 13:05:54 2019
From: mrjoli021 at gmail.com (Joli Martinez)
Date: Fri, 16 Aug 2019 09:05:54 -0400
Subject: [Freeswitch-users] adding modules
In-Reply-To: <CAEJMVkB_5XuWvSo+Yc+5yew6_zhD6uJ7n2Tpd+hH7xObD3MbNg@mail.gmail.com>
References: <CANeteieXZCoGnm2YwMDJVSYM_x+Ro5n+VAU62v3prGeN3mP-8A@mail.gmail.com>
 <CAEJMVkB_5XuWvSo+Yc+5yew6_zhD6uJ7n2Tpd+hH7xObD3MbNg@mail.gmail.com>
Message-ID: <CANeteicdnSeBgeFPUCHAM8aN6MMttYE2M0HcZz3gBX9rLCyXEA@mail.gmail.com>

I am trying to install "sms_flowroute" on Debian 9.

I know where to get the compiled modules, but not sure if it is the same
procedure or if there is a different procedure for this?

thanks,

On Thu, Aug 15, 2019 at 1:16 PM Brian West <brian at freeswitch.com> wrote:

> What binary module are you installing?
>
> /b
>
>
> On Thu, Aug 15, 2019 at 10:21 AM Joli Martinez <mrjoli021 at gmail.com>
> wrote:
>
>> I know that I can add modules on compiled FreeSWITCH and there are
>> instructions for that.  What I don't find is how to add a module when
>> installed from binary.  I am running Debian 9 and installed FreeSWITCH with
>> apt.
>>
>> how do I install a module?  I am looking primarily for sms_flowroute
>> module to enable sms messaging.
>>
>> thanks,
>> _________________________________________________________________________
>>
>> The FreeSWITCH project is sponsored by SignalWire https://signalwire.com
>> Enhance your FreeSWITCH install with disruptive priced SMS and PSTN
>> services.
>> Build your next product on our scalable cloud platform.
>>
>> Join our online community to chat in real time
>> https://signalwire.community
>>
>> Professional FreeSWITCH Services
>> sales at freeswitch.com
>> https://freeswitch.com
>>
>> Official FreeSWITCH Sites
>> https://freeswitch.com/oss
>> https://freeswitch.org/confluence
>> https://cluecon.com
>>
>> FreeSWITCH-users mailing list
>> FreeSWITCH-users at lists.freeswitch.org
>> http://lists.freeswitch.org/mailman/listinfo/freeswitch-users
>> UNSUBSCRIBE:http://lists.freeswitch.org/mailman/options/freeswitch-users
>> https://freeswitch.com
>
>
>
> --
>
> Brian West | Co-founder and Developer
>
> Need Commercial support? email sales at freeswitch.com
>
> FreeSWITCH Solutions | 17345 Civic Drive #2531 Brookfield, WI 53045
> <https://maps.google.com/?q=17345+Civic+Drive+%232531+Brookfield,+WI+53045&entry=gmail&source=g>
>
> Email: brian at freeswitch.com
>
> Mobile: 918-424-9378
>
> Website: https://www.FreeSWITCH.com <https://www.freeswitch.com/>
>
> [image: https://www.facebook.com/signalwireinc?src=email]
> <https://www.facebook.com/freeswitch> [image:
> https://twitter.com/freeswitch] <https://twitter.com/freeswitch>
> _________________________________________________________________________
>
> The FreeSWITCH project is sponsored by SignalWire https://signalwire.com
> Enhance your FreeSWITCH install with disruptive priced SMS and PSTN
> services.
> Build your next product on our scalable cloud platform.
>
> Join our online community to chat in real time
> https://signalwire.community
>
> Professional FreeSWITCH Services
> sales at freeswitch.com
> https://freeswitch.com
>
> Official FreeSWITCH Sites
> https://freeswitch.com/oss
> https://freeswitch.org/confluence
> https://cluecon.com
>
> FreeSWITCH-users mailing list
> FreeSWITCH-users at lists.freeswitch.org
> http://lists.freeswitch.org/mailman/listinfo/freeswitch-users
> UNSUBSCRIBE:http://lists.freeswitch.org/mailman/options/freeswitch-users
> https://freeswitch.com
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.freeswitch.org/pipermail/freeswitch-users/attachments/20190816/5fafe9eb/attachment.html>

From morbidus at rx900.org  Sat Aug 17 16:57:34 2019
From: morbidus at rx900.org (morbidus at rx900.org)
Date: Sat, 17 Aug 2019 18:57:34 +0200
Subject: [Freeswitch-users] hangup cause / sip cause ?
In-Reply-To: <aa216da2-3a36-0f8c-b686-a25eb9552628@rhizomatica.org>
References: <20190802155112.2fb57fe2@linux>
 <aa216da2-3a36-0f8c-b686-a25eb9552628@rhizomatica.org>
Message-ID: <20190817185734.789f96cb@linux>

Thank you all for the help and sorry for the late reply, I did some tests with originate_disposition and endpoint_disposition.

${originate_disposition} looks good in a 'controlled environment' with my asterisks and my dialplans
but then it gets quirky when dealing with the real trunk.

But it's the trunk's fault: they do all sorts of failovers and retries with a single call
and the result is a messy TC.

So for now I'm adding originate_disposition to my cdr
and i'll add some code to 'guess' the best TC among the various cdr fields.

Thank you all and have great holidays :)



On Sat, 3 Aug 2019 20:49:49 +0200
Keith <keith at rhizomatica.org> wrote:

> On 02/08/2019 15:51, morbidus at rx900.org wrote:
> > But i'm unable to get a 'final' termination cause for the calls as i'm used to get with asterisk:
> > i'd like to have something like 'answered', 'cancel', 'busy', 'congestion', 'chanunavail', and so on  
> 
> Can you also check whether originate_disposition, (and maybe
> endpoint_disposition) contain the info you want?
> 
> 
> > so i'm writing last_bridge_hangup_cause, bridge_hangup_cause and hangup_cause in my cdr  
> 
> I'm wondering now. Is last_bridge_hangup_cause in the CDR  the "correct"
> one, verified by your knowledge of what actually happened?
> 
> You /could/ run a hangup hook from XML dialplan, but I think you need to
> run some lua, could be inline lua.. but you can print the value of a
> variable and check it against what you are seeing in your CDR?
> 
> something along the lines of:
> https://lists.freeswitch.org/pipermail/freeswitch-users/2011-August/075103.html
> 
> 

From josen.figueroa at unixmexico.org  Sat Aug 17 17:46:13 2019
From: josen.figueroa at unixmexico.org (Jose Figueroa)
Date: Sat, 17 Aug 2019 12:46:13 -0500
Subject: [Freeswitch-users] Params in verto from fs_cli and backwards
Message-ID: <CAB_jsRgHj8-ki+hu1BCRNFb_AT3WuCO4VkRSTp4zJ5nU0sbUpQ@mail.gmail.com>

Hello,

I need to pass some variables from originate command on fs_cli or lua
script to verto client I have already and backwards from verto to the
fs_cli.

I have this from fs_cli ->
originate {*foo=val1,bar=val2*,ignore_early_media=true,origination_caller_id_number=1003}user/1002
&echo()

What I want is to get the *foo* and *bar* variables on verto client.

In addition, I see the documentation
https://evoluxbr.github.io/verto-docs/tut/making-a-call.html that if you
want to make a call and pass a userVariables they will be visible to
dialplan as verto_dvar_{variable} which is correct I can catch them.

But not from the fs_cli to the verto, or even if I can do it from lua
script to verto might work for my need.

Any help would be appreciated.

Thanks!
Jose Figueroa
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.freeswitch.org/pipermail/freeswitch-users/attachments/20190817/8f09b23a/attachment.html>

From gregor at infomedia.si  Sat Aug 17 18:40:32 2019
From: gregor at infomedia.si (Gregor Nanger)
Date: Sat, 17 Aug 2019 20:40:32 +0200
Subject: [Freeswitch-users] Params in verto from fs_cli and backwards
In-Reply-To: <CAB_jsRgHj8-ki+hu1BCRNFb_AT3WuCO4VkRSTp4zJ5nU0sbUpQ@mail.gmail.com>
References: <CAB_jsRgHj8-ki+hu1BCRNFb_AT3WuCO4VkRSTp4zJ5nU0sbUpQ@mail.gmail.com>
Message-ID: <CAC7ttFE0e5cep_1GJyLyP6F=niQBkjvYCQk0RDg=PUJeu_xhsA@mail.gmail.com>

Try to set verto_dvar_{variable} in originate

On Sat, Aug 17, 2019, 19:47 Jose Figueroa <josen.figueroa at unixmexico.org>
wrote:

> Hello,
>
> I need to pass some variables from originate command on fs_cli or lua
> script to verto client I have already and backwards from verto to the
> fs_cli.
>
> I have this from fs_cli ->
> originate {*foo=val1,bar=val2*,ignore_early_media=true,origination_caller_id_number=1003}user/1002
> &echo()
>
> What I want is to get the *foo* and *bar* variables on verto client.
>
> In addition, I see the documentation
> https://evoluxbr.github.io/verto-docs/tut/making-a-call.html that if you
> want to make a call and pass a userVariables they will be visible to
> dialplan as verto_dvar_{variable} which is correct I can catch them.
>
> But not from the fs_cli to the verto, or even if I can do it from lua
> script to verto might work for my need.
>
> Any help would be appreciated.
>
> Thanks!
> Jose Figueroa
>
> _________________________________________________________________________
>
> The FreeSWITCH project is sponsored by SignalWire https://signalwire.com
> Enhance your FreeSWITCH install with disruptive priced SMS and PSTN
> services.
> Build your next product on our scalable cloud platform.
>
> Join our online community to chat in real time
> https://signalwire.community
>
> Professional FreeSWITCH Services
> sales at freeswitch.com
> https://freeswitch.com
>
> Official FreeSWITCH Sites
> https://freeswitch.com/oss
> https://freeswitch.org/confluence
> https://cluecon.com
>
> FreeSWITCH-users mailing list
> FreeSWITCH-users at lists.freeswitch.org
> http://lists.freeswitch.org/mailman/listinfo/freeswitch-users
> UNSUBSCRIBE:http://lists.freeswitch.org/mailman/options/freeswitch-users
> https://freeswitch.com
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.freeswitch.org/pipermail/freeswitch-users/attachments/20190817/bcb8b223/attachment.html>

From gregor at infomedia.si  Sat Aug 17 18:41:52 2019
From: gregor at infomedia.si (Gregor Nanger)
Date: Sat, 17 Aug 2019 20:41:52 +0200
Subject: [Freeswitch-users] Params in verto from fs_cli and backwards
In-Reply-To: <CAC7ttFE0e5cep_1GJyLyP6F=niQBkjvYCQk0RDg=PUJeu_xhsA@mail.gmail.com>
References: <CAB_jsRgHj8-ki+hu1BCRNFb_AT3WuCO4VkRSTp4zJ5nU0sbUpQ@mail.gmail.com>
 <CAC7ttFE0e5cep_1GJyLyP6F=niQBkjvYCQk0RDg=PUJeu_xhsA@mail.gmail.com>
Message-ID: <CAC7ttFFbLA_cGGmZ8GtC1cHni7rPpawA9b5Kvn4XmL5XLeLc7g@mail.gmail.com>

Sorry, prefix it with verto_h_

Best regards, Gregor

On Sat, Aug 17, 2019, 20:40 Gregor Nanger <gregor at infomedia.si> wrote:

> Try to set verto_dvar_{variable} in originate
>
> On Sat, Aug 17, 2019, 19:47 Jose Figueroa <josen.figueroa at unixmexico.org>
> wrote:
>
>> Hello,
>>
>> I need to pass some variables from originate command on fs_cli or lua
>> script to verto client I have already and backwards from verto to the
>> fs_cli.
>>
>> I have this from fs_cli ->
>> originate {*foo=val1,bar=val2*,ignore_early_media=true,origination_caller_id_number=1003}user/1002
>> &echo()
>>
>> What I want is to get the *foo* and *bar* variables on verto client.
>>
>> In addition, I see the documentation
>> https://evoluxbr.github.io/verto-docs/tut/making-a-call.html that if you
>> want to make a call and pass a userVariables they will be visible to
>> dialplan as verto_dvar_{variable} which is correct I can catch them.
>>
>> But not from the fs_cli to the verto, or even if I can do it from lua
>> script to verto might work for my need.
>>
>> Any help would be appreciated.
>>
>> Thanks!
>> Jose Figueroa
>>
>> _________________________________________________________________________
>>
>> The FreeSWITCH project is sponsored by SignalWire https://signalwire.com
>> Enhance your FreeSWITCH install with disruptive priced SMS and PSTN
>> services.
>> Build your next product on our scalable cloud platform.
>>
>> Join our online community to chat in real time
>> https://signalwire.community
>>
>> Professional FreeSWITCH Services
>> sales at freeswitch.com
>> https://freeswitch.com
>>
>> Official FreeSWITCH Sites
>> https://freeswitch.com/oss
>> https://freeswitch.org/confluence
>> https://cluecon.com
>>
>> FreeSWITCH-users mailing list
>> FreeSWITCH-users at lists.freeswitch.org
>> http://lists.freeswitch.org/mailman/listinfo/freeswitch-users
>> UNSUBSCRIBE:http://lists.freeswitch.org/mailman/options/freeswitch-users
>> https://freeswitch.com
>
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.freeswitch.org/pipermail/freeswitch-users/attachments/20190817/d7b0a610/attachment.html>

From josen.figueroa at unixmexico.org  Sat Aug 17 19:41:06 2019
From: josen.figueroa at unixmexico.org (Jose Figueroa)
Date: Sat, 17 Aug 2019 14:41:06 -0500
Subject: [Freeswitch-users] Params in verto from fs_cli and backwards
In-Reply-To: <CAC7ttFFbLA_cGGmZ8GtC1cHni7rPpawA9b5Kvn4XmL5XLeLc7g@mail.gmail.com>
References: <CAB_jsRgHj8-ki+hu1BCRNFb_AT3WuCO4VkRSTp4zJ5nU0sbUpQ@mail.gmail.com>
 <CAC7ttFE0e5cep_1GJyLyP6F=niQBkjvYCQk0RDg=PUJeu_xhsA@mail.gmail.com>
 <CAC7ttFFbLA_cGGmZ8GtC1cHni7rPpawA9b5Kvn4XmL5XLeLc7g@mail.gmail.com>
Message-ID: <CAB_jsRjDiEtnb8YAYKu1uL6Ua-v42Fqqy+GcUCSiiQSo=Bz92Q@mail.gmail.com>

Hello,

Yes I figured it out, thank you for your help.

JF

On Sat, Aug 17, 2019 at 2:38 PM Gregor Nanger <gregor at infomedia.si> wrote:

> Sorry, prefix it with verto_h_
>
> Best regards, Gregor
>
> On Sat, Aug 17, 2019, 20:40 Gregor Nanger <gregor at infomedia.si> wrote:
>
>> Try to set verto_dvar_{variable} in originate
>>
>> On Sat, Aug 17, 2019, 19:47 Jose Figueroa <josen.figueroa at unixmexico.org>
>> wrote:
>>
>>> Hello,
>>>
>>> I need to pass some variables from originate command on fs_cli or lua
>>> script to verto client I have already and backwards from verto to the
>>> fs_cli.
>>>
>>> I have this from fs_cli ->
>>> originate {*foo=val1,bar=val2*,ignore_early_media=true,origination_caller_id_number=1003}user/1002
>>> &echo()
>>>
>>> What I want is to get the *foo* and *bar* variables on verto client.
>>>
>>> In addition, I see the documentation
>>> https://evoluxbr.github.io/verto-docs/tut/making-a-call.html that if
>>> you want to make a call and pass a userVariables they will be visible to
>>> dialplan as verto_dvar_{variable} which is correct I can catch them.
>>>
>>> But not from the fs_cli to the verto, or even if I can do it from lua
>>> script to verto might work for my need.
>>>
>>> Any help would be appreciated.
>>>
>>> Thanks!
>>> Jose Figueroa
>>>
>>> _________________________________________________________________________
>>>
>>> The FreeSWITCH project is sponsored by SignalWire https://signalwire.com
>>> Enhance your FreeSWITCH install with disruptive priced SMS and PSTN
>>> services.
>>> Build your next product on our scalable cloud platform.
>>>
>>> Join our online community to chat in real time
>>> https://signalwire.community
>>>
>>> Professional FreeSWITCH Services
>>> sales at freeswitch.com
>>> https://freeswitch.com
>>>
>>> Official FreeSWITCH Sites
>>> https://freeswitch.com/oss
>>> https://freeswitch.org/confluence
>>> https://cluecon.com
>>>
>>> FreeSWITCH-users mailing list
>>> FreeSWITCH-users at lists.freeswitch.org
>>> http://lists.freeswitch.org/mailman/listinfo/freeswitch-users
>>> UNSUBSCRIBE:http://lists.freeswitch.org/mailman/options/freeswitch-users
>>> https://freeswitch.com
>>
>> _________________________________________________________________________
>
> The FreeSWITCH project is sponsored by SignalWire https://signalwire.com
> Enhance your FreeSWITCH install with disruptive priced SMS and PSTN
> services.
> Build your next product on our scalable cloud platform.
>
> Join our online community to chat in real time
> https://signalwire.community
>
> Professional FreeSWITCH Services
> sales at freeswitch.com
> https://freeswitch.com
>
> Official FreeSWITCH Sites
> https://freeswitch.com/oss
> https://freeswitch.org/confluence
> https://cluecon.com
>
> FreeSWITCH-users mailing list
> FreeSWITCH-users at lists.freeswitch.org
> http://lists.freeswitch.org/mailman/listinfo/freeswitch-users
> UNSUBSCRIBE:http://lists.freeswitch.org/mailman/options/freeswitch-users
> https://freeswitch.com
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.freeswitch.org/pipermail/freeswitch-users/attachments/20190817/c31049d1/attachment-0001.html>

From gmaruzz at gmail.com  Sun Aug 18 15:31:31 2019
From: gmaruzz at gmail.com (Giovanni Maruzzelli)
Date: Sun, 18 Aug 2019 17:31:31 +0200
Subject: [Freeswitch-users] FYI: fs 1.10 incompatible config change PGSQL
Message-ID: <CALXCt0p6gu8TZFj17yyFSf10FGwXHf72O_wWTCdhKZMSoERo3g@mail.gmail.com>

Ye People:

because now Fs1.10 packages are installed also if you still use the 1.8
repo, you better aware of an incompatible change:

pgsql is no more in core, but in aptly named mod_pgsql.

You MUST NOT load mod_pgsql in modules.conf.xml (do not work), but in a
special additional xml file, in same "autoload_configs" directory.

File name:
pre_load_modules.conf.xml

File content:
<configuration name="pre_load_modules.conf" description="Modules">
  <modules>
    <!-- Databases -->
    <!-- <load module="mod_mariadb"/> -->
    <load module="mod_pgsql"/>
  </modules>
</configuration>

Hope this help you keep your hair :)

-giovanni



-- 
Sincerely,

Giovanni Maruzzelli
OpenTelecom.IT
cell: +39 347 266 56 18
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.freeswitch.org/pipermail/freeswitch-users/attachments/20190818/61743d79/attachment.html>

From david.villasmil.work at gmail.com  Sun Aug 18 18:04:16 2019
From: david.villasmil.work at gmail.com (David Villasmil)
Date: Sun, 18 Aug 2019 19:04:16 +0100
Subject: [Freeswitch-users] FYI: fs 1.10 incompatible config change PGSQL
In-Reply-To: <CALXCt0p6gu8TZFj17yyFSf10FGwXHf72O_wWTCdhKZMSoERo3g@mail.gmail.com>
References: <CALXCt0p6gu8TZFj17yyFSf10FGwXHf72O_wWTCdhKZMSoERo3g@mail.gmail.com>
Message-ID: <CAFGRPVpN+5B-MSearxx=s7w5B+sL3FtNZBZPqfUwpUuqjBqvYg@mail.gmail.com>

Hello Giovanni,

Thanks for the information! Indeed you’ve saved us a few hairs!

David

On Sun, 18 Aug 2019 at 16:51, Giovanni Maruzzelli <gmaruzz at gmail.com> wrote:

> Ye People:
>
> because now Fs1.10 packages are installed also if you still use the 1.8
> repo, you better aware of an incompatible change:
>
> pgsql is no more in core, but in aptly named mod_pgsql.
>
> You MUST NOT load mod_pgsql in modules.conf.xml (do not work), but in a
> special additional xml file, in same "autoload_configs" directory.
>
> File name:
> pre_load_modules.conf.xml
>
> File content:
> <configuration name="pre_load_modules.conf" description="Modules">
>   <modules>
>     <!-- Databases -->
>     <!-- <load module="mod_mariadb"/> -->
>     <load module="mod_pgsql"/>
>   </modules>
> </configuration>
>
> Hope this help you keep your hair :)
>
> -giovanni
>
>
>
> --
> Sincerely,
>
> Giovanni Maruzzelli
> OpenTelecom.IT
> cell: +39 347 266 56 18
>
> _________________________________________________________________________
>
> The FreeSWITCH project is sponsored by SignalWire https://signalwire.com
> Enhance your FreeSWITCH install with disruptive priced SMS and PSTN
> services.
> Build your next product on our scalable cloud platform.
>
> Join our online community to chat in real time
> https://signalwire.community
>
> Professional FreeSWITCH Services
> sales at freeswitch.com
> https://freeswitch.com
>
> Official FreeSWITCH Sites
> https://freeswitch.com/oss
> https://freeswitch.org/confluence
> https://cluecon.com
>
> FreeSWITCH-users mailing list
> FreeSWITCH-users at lists.freeswitch.org
> http://lists.freeswitch.org/mailman/listinfo/freeswitch-users
> UNSUBSCRIBE:http://lists.freeswitch.org/mailman/options/freeswitch-users
> https://freeswitch.com

-- 
Regards,

David Villasmil
email: david.villasmil.work at gmail.com
phone: +34669448337
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.freeswitch.org/pipermail/freeswitch-users/attachments/20190818/d670c6db/attachment.html>

From bipin at xbipin.com  Tue Aug 20 09:51:08 2019
From: bipin at xbipin.com (Bipin Patel)
Date: Tue, 20 Aug 2019 13:51:08 +0400
Subject: [Freeswitch-users] FS-9102 - core modules not loaded
Message-ID: <2995ff9d4aa3b87587b91ccc6142a051@xbipin.com>

hi,

what was the fix to FS-9102 because im seeing same behavior again on 
1.10.1-dev running on a few raspberry pis, its happening to some of them 
only. core_pcm_module doesnt show in show codecs or modules but it still 
works, rebooting the machine loads all of the modules but restarting the 
service always causes them to not show loaded

Regards,
Bipin



From alex at digitalmail.com  Tue Aug 20 14:54:11 2019
From: alex at digitalmail.com (Alex Lake)
Date: Tue, 20 Aug 2019 14:54:11 +0000
Subject: [Freeswitch-users] Help with Lua modules
Message-ID: <56ea7e87-2986-ff54-d9fe-dc85e9f1d17a@digitalmail.com>

I'm slightly struggling to work out how to install Lua modules (eg 
luaxml and luacurl) so that they can be used by Freeswitch.

I have managed to install them under Lua5.1, but AIUI, Lua5.2 is the way 
to go.

For lua 5.1, I did:

apt-get install -y lua5.1 lua5.1-dev luarocks
luarocks install luaxml
luarocks install luacurl CURL_INCDIR=/usr/include/x86_64-linux-gnu

And that works for commandline lua, but the lua built in to Freeswitch seems to be 5.2. If I try using Luarocks to install luaxml and luacurl, I get problems suggesting that these modules aren't suitable.

Should I try to recompile Freeswitch to use Lua5.1? If so, where are the instructions?

Thanks!


-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.freeswitch.org/pipermail/freeswitch-users/attachments/20190820/727b685e/attachment.html>

From petarrjones at outlook.com  Sat Aug 17 03:53:42 2019
From: petarrjones at outlook.com (Petarr Jones)
Date: Sat, 17 Aug 2019 03:53:42 +0000
Subject: [Freeswitch-users] Freeswitch security and BLF
Message-ID: <SG2PR03MB491187E827AAEF7C288B355CA1AE0@SG2PR03MB4911.apcprd03.prod.outlook.com>

Hi

The following question is based on the fact that I am trying configure Freeswitch so that users can simply add an extension number in the BLF field of the phone but "user id" is alphanumeric.

I am making the assumption that having a "user id" of freeswitchuser1001 at example.com is better than 1001 since the fraudsters would automatically try extensions but are less likely to know a complicated username? Would that logic only hold true if I am using TLS?

If this is correct, and I use the "number-alias" to link the "user id" and user's extension, what would I have to use in the BLF field of the phone.

Also, in the documentation there is a warning about using "number-alias" with mod_xml_curl. When will this be an issue and should I consider a different approach?

(no sure if I can ask this last question here - should I be asking the Kamailio crowd)
I have considered using Kamailio to do the authentication and then re-write the SIP request to only include extension when it gets passed to Freeswitch but don't understand the BLF mechanism and how that would then work. Would it be better for Kamailio to manage the BLF functionality?

All help greatly appreciated.
Petarr



-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.freeswitch.org/pipermail/freeswitch-users/attachments/20190817/5f9e0ff6/attachment-0001.html>

From petarrjones at outlook.com  Sun Aug 18 08:13:20 2019
From: petarrjones at outlook.com (Petarr Jones)
Date: Sun, 18 Aug 2019 08:13:20 +0000
Subject: [Freeswitch-users] Freeswitch Slack channel
Message-ID: <HK0PR03MB4900F7F0C04CE36F0ADE4D70A1A90@HK0PR03MB4900.apcprd03.prod.outlook.com>

Hi

Is there an active FS Slack channel? If so, can someone please send me the invite link.

Thanks in advance
Petarr
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.freeswitch.org/pipermail/freeswitch-users/attachments/20190818/4f494f00/attachment-0001.html>

From shivalichalke at gmail.com  Tue Aug 20 06:17:56 2019
From: shivalichalke at gmail.com (shivali chalke)
Date: Tue, 20 Aug 2019 11:47:56 +0530
Subject: [Freeswitch-users] Silence detection in voicemail greeting file
Message-ID: <CAHupvLRx+tameK4qHOfVcsDRQie4KZjn4cxusR_FKBrd=-UC0g@mail.gmail.com>

Hi Guys,

I am trying to record greeting for voicemai. After done recording, Listening
to the playback there is 2sec of silence then actual recording start
playing which also not complete.  I have found there to be a longer time in
the beginning before the record function actually starts.
Can anyone help me on this?

Thanks in advance.
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.freeswitch.org/pipermail/freeswitch-users/attachments/20190820/737e4bad/attachment-0001.html>

From jungleboogie0 at gmail.com  Tue Aug 20 03:42:18 2019
From: jungleboogie0 at gmail.com (jungle boogie)
Date: Mon, 19 Aug 2019 20:42:18 -0700
Subject: [Freeswitch-users] FYI: fs 1.10 incompatible config change PGSQL
In-Reply-To: <CALXCt0p6gu8TZFj17yyFSf10FGwXHf72O_wWTCdhKZMSoERo3g@mail.gmail.com>
References: <CALXCt0p6gu8TZFj17yyFSf10FGwXHf72O_wWTCdhKZMSoERo3g@mail.gmail.com>
Message-ID: <cc6b0334-656e-8296-0dc0-9fad1c93c0ff@gmail.com>

Thus said Giovanni Maruzzelli <gmaruzz at gmail.com> on Sun, 18 Aug 2019 
17:31:31 +0200
> Ye People:
> 
> because now Fs1.10 packages are installed also if you still use the 1.8
> repo, you better aware of an incompatible change:
> 
> pgsql is no more in core, but in aptly named mod_pgsql.
> 

Here is the jira regarding this:
https://freeswitch.org/jira/browse/FS-11880




From anthony.minessale at gmail.com  Wed Aug 21 00:08:36 2019
From: anthony.minessale at gmail.com (Anthony Minessale)
Date: Tue, 20 Aug 2019 19:08:36 -0500
Subject: [Freeswitch-users] Freeswitch Slack channel
In-Reply-To: <HK0PR03MB4900F7F0C04CE36F0ADE4D70A1A90@HK0PR03MB4900.apcprd03.prod.outlook.com>
References: <HK0PR03MB4900F7F0C04CE36F0ADE4D70A1A90@HK0PR03MB4900.apcprd03.prod.outlook.com>
Message-ID: <CAKbxfG8sCSsRBXZfLUxu+dHZGDGE4q=-UY-ds9-4kFHGsDx66w@mail.gmail.com>

Hi,

Just go to https://signalwire.community in your browser and you can
self-invite.
We have channels for freeswitch freeswitch-dev cluecon and several
signalwire channels.


On Tue, Aug 20, 2019 at 6:07 PM Petarr Jones <petarrjones at outlook.com>
wrote:

> Hi
>
> Is there an active FS Slack channel? If so, can someone please send me the
> invite link.
>
> Thanks in advance
> Petarr
> _________________________________________________________________________
>
> The FreeSWITCH project is sponsored by SignalWire https://signalwire.com
> Enhance your FreeSWITCH install with disruptive priced SMS and PSTN
> services.
> Build your next product on our scalable cloud platform.
>
> Join our online community to chat in real time
> https://signalwire.community
>
> Professional FreeSWITCH Services
> sales at freeswitch.com
> https://freeswitch.com
>
> Official FreeSWITCH Sites
> https://freeswitch.com/oss
> https://freeswitch.org/confluence
> https://cluecon.com
>
> FreeSWITCH-users mailing list
> FreeSWITCH-users at lists.freeswitch.org
> http://lists.freeswitch.org/mailman/listinfo/freeswitch-users
> UNSUBSCRIBE:http://lists.freeswitch.org/mailman/options/freeswitch-users
> https://freeswitch.com



-- 
Anthony Minessale II
Founder, FreeSWITCH.
http://freeswitch.com


https://youtu.be/l_hOxzCt6X4
https://www.youtube.com/watch?v=oAxXgyx5jUw
https://www.youtube.com/watch?v=9XXgW34t40s
https://www.youtube.com/watch?v=NLaDpGQuZDA
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.freeswitch.org/pipermail/freeswitch-users/attachments/20190820/90173a68/attachment.html>

From bilaln018 at gmail.com  Wed Aug 21 14:12:23 2019
From: bilaln018 at gmail.com (Bilal Abbasi)
Date: Wed, 21 Aug 2019 19:12:23 +0500
Subject: [Freeswitch-users] [unable to compile freeswitch on debian 10]
In-Reply-To: <CAEJMVkDBHWQF0-JKbL7i0wbvGY70M3ZQPgUyTb1ELQJYsnMpdg@mail.gmail.com>
References: <CADSVerBEjQ8sxkpJHvHeY9xwngNkqgNiTrkHsfSCkqQa+iS2kQ@mail.gmail.com>
 <CAEJMVkDBHWQF0-JKbL7i0wbvGY70M3ZQPgUyTb1ELQJYsnMpdg@mail.gmail.com>
Message-ID: <CADSVerDxDcjOXNswMhsbQHELJ+8d-24q2HxuBFk9rsKX3aveDw@mail.gmail.com>

Its done


On Thu, Aug 15, 2019 at 8:15 PM Brian West <brian at freeswitch.com> wrote:

> Please search JIRA, if the issue isn't filed, file it please.
>
> Thanks,
> Brian
>
> On Thu, Aug 15, 2019 at 7:57 AM Bilal Abbasi <bilaln018 at gmail.com> wrote:
>
>> Hi Users,
>> I am unable to build freeswich on debain 10(buster) freeswitch version
>> 1.10, here are the error i get.
>>
>> making all mod_http_cache
>> make[4]: Entering directory
>> '/usr/src/freeswitch/src/mod/applications/mod_http_cache'
>> Making all in .
>> make[5]: Entering directory
>> '/usr/src/freeswitch/src/mod/applications/mod_http_cache'
>>   CC       mod_http_cache_la-mod_http_cache.lo
>> mod_http_cache.c: In function ‘cached_url_filename_create.isra.4’:
>> mod_http_cache.c:988:2: error: ‘strncpy’ output may be truncated copying
>> 2 bytes from a string of length 256 [-Werror=stringop-truncation]
>>   strncpy(uuid_dir, uuid_str, 2);
>>   ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
>> mod_http_cache.c:988:2: error: ‘strncpy’ output may be truncated copying
>> 2 bytes from a string of length 256 [-Werror=stringop-truncation]
>> In function ‘parse_domain.constprop’,
>>     inlined from ‘url_cache_http_profile_find_by_fqdn.part.2.constprop’
>> at mod_http_cache.c:929:3:
>> mod_http_cache.c:276:2: error: ‘strncpy’ specified bound 255 equals
>> destination size [-Werror=stringop-truncation]
>>   strncpy(domain_buf, start, domain_buf_len);
>>   ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
>> cc1: all warnings being treated as errors
>> make[5]: *** [Makefile:761: mod_http_cache_la-mod_http_cache.lo] Error 1
>> make[5]: Leaving directory
>> '/usr/src/freeswitch/src/mod/applications/mod_http_cache'
>> make[4]: *** [Makefile:801: all-recursive] Error 1
>> make[4]: Leaving directory
>> '/usr/src/freeswitch/src/mod/applications/mod_http_cache'
>> make[3]: *** [Makefile:704: mod_http_cache-all] Error 1
>> make[3]: Leaving directory '/usr/src/freeswitch/src/mod'
>> make[2]: *** [Makefile:607: all-recursive] Error 1
>> make[2]: Leaving directory '/usr/src/freeswitch/src'
>> make[1]: *** [Makefile:3736: all-recursive] Error 1
>> make[1]: Leaving directory '/usr/src/freeswitch'
>> make: *** [Makefile:1445: all] Error 2
>>
>> Regards
>> Abbasi
>> _________________________________________________________________________
>>
>> The FreeSWITCH project is sponsored by SignalWire https://signalwire.com
>> Enhance your FreeSWITCH install with disruptive priced SMS and PSTN
>> services.
>> Build your next product on our scalable cloud platform.
>>
>> Join our online community to chat in real time
>> https://signalwire.community
>>
>> Professional FreeSWITCH Services
>> sales at freeswitch.com
>> https://freeswitch.com
>>
>> Official FreeSWITCH Sites
>> https://freeswitch.com/oss
>> https://freeswitch.org/confluence
>> https://cluecon.com
>>
>> FreeSWITCH-users mailing list
>> FreeSWITCH-users at lists.freeswitch.org
>> http://lists.freeswitch.org/mailman/listinfo/freeswitch-users
>> UNSUBSCRIBE:http://lists.freeswitch.org/mailman/options/freeswitch-users
>> https://freeswitch.com
>
>
>
> --
>
> Brian West | Co-founder and Developer
>
> Need Commercial support? email sales at freeswitch.com
>
> FreeSWITCH Solutions | 17345 Civic Drive #2531 Brookfield, WI 53045
> <https://maps.google.com/?q=17345+Civic+Drive+%232531+Brookfield,+WI+53045&entry=gmail&source=g>
>
> Email: brian at freeswitch.com
>
> Mobile: 918-424-9378
>
> Website: https://www.FreeSWITCH.com <https://www.freeswitch.com/>
>
> [image: https://www.facebook.com/signalwireinc?src=email]
> <https://www.facebook.com/freeswitch> [image:
> https://twitter.com/freeswitch] <https://twitter.com/freeswitch>
> _________________________________________________________________________
>
> The FreeSWITCH project is sponsored by SignalWire https://signalwire.com
> Enhance your FreeSWITCH install with disruptive priced SMS and PSTN
> services.
> Build your next product on our scalable cloud platform.
>
> Join our online community to chat in real time
> https://signalwire.community
>
> Professional FreeSWITCH Services
> sales at freeswitch.com
> https://freeswitch.com
>
> Official FreeSWITCH Sites
> https://freeswitch.com/oss
> https://freeswitch.org/confluence
> https://cluecon.com
>
> FreeSWITCH-users mailing list
> FreeSWITCH-users at lists.freeswitch.org
> http://lists.freeswitch.org/mailman/listinfo/freeswitch-users
> UNSUBSCRIBE:http://lists.freeswitch.org/mailman/options/freeswitch-users
> https://freeswitch.com
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.freeswitch.org/pipermail/freeswitch-users/attachments/20190821/fe9037de/attachment.html>

From shaun.stokes at itec-support.co.uk  Thu Aug 22 14:00:58 2019
From: shaun.stokes at itec-support.co.uk (Shaun Stokes)
Date: Thu, 22 Aug 2019 14:00:58 +0000
Subject: [Freeswitch-users] Teens Direct Routing - contact and
 record-route	headers are missing
In-Reply-To: <CAJU-n61A6AtNZqtk_-8-FC9OdGiLmJgrGojqKgnRe3kuvYqkZw@mail.gmail.com>
References: <CAJU-n61A6AtNZqtk_-8-FC9OdGiLmJgrGojqKgnRe3kuvYqkZw@mail.gmail.com>
Message-ID: <LNXP265MB1180241A7F7AD7DCA5C68E91EBA50@LNXP265MB1180.GBRP265.PROD.OUTLOOK.COM>

Already fixed it here:

https://freeswitch.org/jira/projects/FS/issues/FS-11978?filter=reportedbyme

________________________________
From: FreeSWITCH-users <freeswitch-users-bounces at lists.freeswitch.org> on behalf of Tulipa Frigo <tulipa.frigo at gmail.com>
Sent: 15 August 2019 16:30:13
To: freeswitch-users at lists.freeswitch.org <freeswitch-users at lists.freeswitch.org>
Subject: [Freeswitch-users] Teens Direct Routing - contact and record-route headers are missing

Hi all,

I'm trying to configure my freeswitch to send and receive calls from Teens Direct Routing . Then, I configured the SIP gateway /usr/local/freeswitch/sip_profiles/extern/gateway_teens.xml :

<include>
  <gateway name="teens">
  <param name="realm" value="sip.pstnhub.microsoft.com:5061<http://sip.pstnhub.microsoft.com:5061>"/>
  <param name="register" value="false"/>
  <param name="register-transport" value="tls"/>
  <param name="ping" value="25"/>
  </gateway>
</include>

The Teens Direct Routing only enable the sip trunk after receive and send SIP OPTIONS with success, in both direction. The OPTIONS FLOW description from Direct Routing Configure page, https://docs.microsoft.com/en-us/microsoftteams/direct-routing-configure: "The SBC sends a OPTIONS messages to Teens Direct Routing and receives a 200OK. When Direct Routing sees incoming OPTIONS, it will start sending outgoing SIP Options messages to the SBC FQDN configured in the Contact header field in the incoming OPTIONS message and the SBC reply with 200OK."

The problem is that the freeswitch (SBC) is receiving the response FORBIDDEN , with reason : Q.850;cause=21;text="29175f0d-ebe8-43ea-836f-708b6d4b0d4f;Record-Route and Contact headers are missing" .

Folowing is the OPTIONS msg sent from freeswitch to Teens Direct Rounting and the response:

   ------------------------------------------------------------------------
send 597 bytes to tls/[52.114.76.76]:5061 at 11:10:15.890560:
   ------------------------------------------------------------------------
   OPTIONS sip:sip.pstnhub.microsoft.com:5061;transport=tls SIP/2.0
   Via: SIP/2.0/TLS 177.53.17.168:5081;rport;branch=z9hG4bKg5DyZ09c7Bv2r
   Max-Forwards: 70
   From: <sip:sip.pstnhub.microsoft.com:5061<http://sip.pstnhub.microsoft.com:5061>>;tag=ge55jU7NBK1rr
   To: <sip:sip.pstnhub.microsoft.com:5061<http://sip.pstnhub.microsoft.com:5061>>
   Call-ID: 3f0f42b7-3a09-1238-5e8a-00155d11a606
   CSeq: 8385268 OPTIONS
   User-Agent: FreeSWITCH-mod_sofia/1.8.6+git~20190606T190249Z~93b4c92e75~64bit
   Allow: INVITE, ACK, BYE, CANCEL, OPTIONS, MESSAGE, INFO, UPDATE, REGISTER, REFER, NOTIFY
   Supported: timer, path, replaces
   Allow-Events: talk, hold, conference, refer
   Content-Length: 0

   ------------------------------------------------------------------------
recv 545 bytes from tls/[52.114.76.76]:5061 at 11:10:16.070876:
   ------------------------------------------------------------------------
   SIP/2.0 403 Forbidden
   FROM: <sip:sip.pstnhub.microsoft.com:5061<http://sip.pstnhub.microsoft.com:5061>>;tag=ge55jU7NBK1rr
   TO: <sip:sip.pstnhub.microsoft.com:5061<http://sip.pstnhub.microsoft.com:5061>>
   CSEQ: 8385268 OPTIONS
   CALL-ID: 3f0f42b7-3a09-1238-5e8a-00155d11a606
   VIA: SIP/2.0/TLS 177.53.17.168:5081;branch=z9hG4bKg5DyZ09c7Bv2r;rport
   REASON: Q.850;cause=21;text="29175f0d-ebe8-43ea-836f-708b6d4b0d4f;Record-Route and Contact headers are missing"
   CONTENT-LENGTH: 0
   ALLOW: INVITE
   ALLOW: ACK
   ALLOW: OPTIONS
   ALLOW: CANCEL
   ALLOW: BYE
   ALLOW: NOTIFY
   SERVER: Microsoft.PSTNHub.SIPProxy v.2019.7.4.9 i.EUNO.2

   ------------------------------------------------------------------------

How can I add these headers into OPTIONS msg ?

Thanks and Regards

Tulipa Frigo

-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.freeswitch.org/pipermail/freeswitch-users/attachments/20190822/b1e648a4/attachment.html>

From andrew at asiplas.net  Wed Aug 21 14:18:48 2019
From: andrew at asiplas.net (Andrew Siplas)
Date: Wed, 21 Aug 2019 10:18:48 -0400
Subject: [Freeswitch-users] [unable to compile freeswitch on debian 10]
In-Reply-To: <CADSVerDxDcjOXNswMhsbQHELJ+8d-24q2HxuBFk9rsKX3aveDw@mail.gmail.com>
References: <CADSVerBEjQ8sxkpJHvHeY9xwngNkqgNiTrkHsfSCkqQa+iS2kQ@mail.gmail.com>
 <CAEJMVkDBHWQF0-JKbL7i0wbvGY70M3ZQPgUyTb1ELQJYsnMpdg@mail.gmail.com>
 <CADSVerDxDcjOXNswMhsbQHELJ+8d-24q2HxuBFk9rsKX3aveDw@mail.gmail.com>
Message-ID: <20190821101848.3a032105@aslap.h.asip.tel>

In a pinch you can probably add "-Wno-stringop-truncation" and
"-Wno-format-truncation" to compile with GCC 8+ to get it done.

> export CFLAGS='-Wno-format-truncation -Wno-stringop-truncation'
> export CXXFLAGS='-Wno-format-truncation -Wno-stringop-truncation'


On Wed, 21 Aug 2019 19:12:23 +0500
Bilal Abbasi <bilaln018 at gmail.com> wrote:

> Its done
> 
> 
> On Thu, Aug 15, 2019 at 8:15 PM Brian West <brian at freeswitch.com>
> wrote:
>
> > Please search JIRA, if the issue isn't filed, file it please.
> >
> > Thanks,
> > Brian
> >
> > On Thu, Aug 15, 2019 at 7:57 AM Bilal Abbasi <bilaln018 at gmail.com>
> > wrote: 
> >> Hi Users,
> >> I am unable to build freeswich on debain 10(buster) freeswitch
> >> version 1.10, here are the error i get.
> >>
> >> making all mod_http_cache
> >> make[4]: Entering directory
> >> '/usr/src/freeswitch/src/mod/applications/mod_http_cache'
> >> Making all in .
> >> make[5]: Entering directory
> >> '/usr/src/freeswitch/src/mod/applications/mod_http_cache'
> >>   CC       mod_http_cache_la-mod_http_cache.lo
> >> mod_http_cache.c: In function ‘cached_url_filename_create.isra.4’:
> >> mod_http_cache.c:988:2: error: ‘strncpy’ output may be truncated
> >> copying 2 bytes from a string of length 256
> >> [-Werror=stringop-truncation] strncpy(uuid_dir, uuid_str, 2);
> >>   ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
> >> mod_http_cache.c:988:2: error: ‘strncpy’ output may be truncated
> >> copying 2 bytes from a string of length 256
> >> [-Werror=stringop-truncation] In function ‘parse_domain.constprop’,
> >>     inlined from
> >> ‘url_cache_http_profile_find_by_fqdn.part.2.constprop’ at
> >> mod_http_cache.c:929:3: mod_http_cache.c:276:2: error: ‘strncpy’
> >> specified bound 255 equals destination size
> >> [-Werror=stringop-truncation] strncpy(domain_buf, start,
> >> domain_buf_len); ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
> >> cc1: all warnings being treated as errors
> >> make[5]: *** [Makefile:761: mod_http_cache_la-mod_http_cache.lo]
> >> Error 1 make[5]: Leaving directory
> >> '/usr/src/freeswitch/src/mod/applications/mod_http_cache'
> >> make[4]: *** [Makefile:801: all-recursive] Error 1
> >> make[4]: Leaving directory
> >> '/usr/src/freeswitch/src/mod/applications/mod_http_cache'
> >> make[3]: *** [Makefile:704: mod_http_cache-all] Error 1
> >> make[3]: Leaving directory '/usr/src/freeswitch/src/mod'
> >> make[2]: *** [Makefile:607: all-recursive] Error 1
> >> make[2]: Leaving directory '/usr/src/freeswitch/src'
> >> make[1]: *** [Makefile:3736: all-recursive] Error 1
> >> make[1]: Leaving directory '/usr/src/freeswitch'
> >> make: *** [Makefile:1445: all] Error 2
> >>
> >> Regards
> >> Abbasi
> >> _________________________________________________________________________
> >>
> >> The FreeSWITCH project is sponsored by SignalWire
> >> https://signalwire.com Enhance your FreeSWITCH install with
> >> disruptive priced SMS and PSTN services.
> >> Build your next product on our scalable cloud platform.
> >>
> >> Join our online community to chat in real time
> >> https://signalwire.community
> >>
> >> Professional FreeSWITCH Services
> >> sales at freeswitch.com
> >> https://freeswitch.com
> >>
> >> Official FreeSWITCH Sites
> >> https://freeswitch.com/oss
> >> https://freeswitch.org/confluence
> >> https://cluecon.com
> >>
> >> FreeSWITCH-users mailing list
> >> FreeSWITCH-users at lists.freeswitch.org
> >> http://lists.freeswitch.org/mailman/listinfo/freeswitch-users
> >> UNSUBSCRIBE:http://lists.freeswitch.org/mailman/options/freeswitch-users
> >> https://freeswitch.com  
> >
> >
> >
> > --
> >
> > Brian West | Co-founder and Developer
> >
> > Need Commercial support? email sales at freeswitch.com
> >
> > FreeSWITCH Solutions | 17345 Civic Drive #2531 Brookfield, WI 53045
> > <https://maps.google.com/?q=17345+Civic+Drive+%232531+Brookfield,+WI+53045&entry=gmail&source=g>
> >
> > Email: brian at freeswitch.com
> >
> > Mobile: 918-424-9378
> >
> > Website: https://www.FreeSWITCH.com <https://www.freeswitch.com/>
> >
> > [image: https://www.facebook.com/signalwireinc?src=email]
> > <https://www.facebook.com/freeswitch> [image:
> > https://twitter.com/freeswitch] <https://twitter.com/freeswitch>
> > _________________________________________________________________________
> >
> > The FreeSWITCH project is sponsored by SignalWire
> > https://signalwire.com Enhance your FreeSWITCH install with
> > disruptive priced SMS and PSTN services.
> > Build your next product on our scalable cloud platform.
> >
> > Join our online community to chat in real time
> > https://signalwire.community
> >
> > Professional FreeSWITCH Services
> > sales at freeswitch.com
> > https://freeswitch.com
> >
> > Official FreeSWITCH Sites
> > https://freeswitch.com/oss
> > https://freeswitch.org/confluence
> > https://cluecon.com
> >
> > FreeSWITCH-users mailing list
> > FreeSWITCH-users at lists.freeswitch.org
> > http://lists.freeswitch.org/mailman/listinfo/freeswitch-users
> > UNSUBSCRIBE:http://lists.freeswitch.org/mailman/options/freeswitch-users
> > https://freeswitch.com  



From info at tnitelecom.com  Thu Aug 22 20:18:37 2019
From: info at tnitelecom.com (info at tnitelecom.com)
Date: Thu, 22 Aug 2019 13:18:37 -0700
Subject: [Freeswitch-users] Multiple-Registrations same extension
Message-ID: <20190822131837.56f5600252ccdab3bd27e89c6dddf0b4.80f003ef46.wbe@email17.godaddy.com>

An HTML attachment was scrubbed...
URL: <http://lists.freeswitch.org/pipermail/freeswitch-users/attachments/20190822/4df9423f/attachment.html>

From jelledejong at powercraft.nl  Wed Aug 21 15:12:39 2019
From: jelledejong at powercraft.nl (Jelle de Jong)
Date: Wed, 21 Aug 2019 17:12:39 +0200
Subject: [Freeswitch-users] upgrade freeswtich 1.4.26~37-1~jessie+1 i386 to
 freeswitch_1.10.1 amd64
Message-ID: <e55cca19-8de7-d848-3925-e31d0ed58d91@powercraft.nl>

Hello everybody,

I just found out my freeswitch was not updating because I had a i386 
version and all new versions where amd64.

I can change to a amd64 buster version, but I would like to know what 
configuration issues I will be going to have.

Is there an upgrade script from 1.4 to 1.10 (or do I need to upgrade to 
1.8 or 1.6 first?).

How can I keep the current configuration working? and if not is there a 
documentation page to make this move easier?

Kind regards,

Jelle de Jong

--

freeswitch_1.10.1~release~12~f9990221e6~buster-1~buster+1_amd64.deb
freeswitch-meta-all_1.10.1~release~12~f9990221e6~buster-1~buster+1_amd64.deb


From sajad at tahernejad.com  Wed Aug 21 16:33:53 2019
From: sajad at tahernejad.com (Sajad Tahernejad)
Date: Wed, 21 Aug 2019 21:03:53 +0430
Subject: [Freeswitch-users] session is nil
Message-ID: <CADwb5P2-Lu4P26QK9T6TUzj1nEvzTZPqVArvfXHb0xbqZk+4SA@mail.gmail.com>

Hi,
I want use session:playAndGetDigits in position lua script, but gived me
this error
/scripts/lua/callcenter-announce-position.lua:39: attempt to index global
'session' (a nil value)
Please help me
Thanks.
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.freeswitch.org/pipermail/freeswitch-users/attachments/20190821/01421d96/attachment.html>

From stevie.holpp at web.de  Wed Aug 21 11:06:58 2019
From: stevie.holpp at web.de (stevie.holpp at web.de)
Date: Wed, 21 Aug 2019 13:06:58 +0200
Subject: [Freeswitch-users] Run freeswitch with supplementary groups to
 solver permission problems
Message-ID: <trinity-d04eef65-cfc2-4fb0-8491-2076ae582960-1566385618400@3c-app-webde-bap38>

An HTML attachment was scrubbed...
URL: <http://lists.freeswitch.org/pipermail/freeswitch-users/attachments/20190821/8edd2e50/attachment.html>

From toraritte at gmail.com  Fri Aug 23 10:49:27 2019
From: toraritte at gmail.com (=?UTF-8?Q?Guly=C3=A1s_Attila?=)
Date: Fri, 23 Aug 2019 03:49:27 -0700
Subject: [Freeswitch-users] lua freeswitch.Dbh "ERR [unable to open database
	file]"
Message-ID: <CADnELphi+CfCvpBiATh-MNpewDneZXbb-oui2-0bj7EeTaJP6w@mail.gmail.com>

Hi,

When I try to connect to a remote PostgreSQL server, I get

    2019-08-23 10:19:05.793364 [ERR] switch_core_db.c:223 SQL ERR [unable
to open database file]

when using the Lua API

   freeswitch.Dbh("pgsql://hostaddr=1.2.3.4 dbname=mydb user=postgres
password=postgres options='-c client_min_messages=NOTICE'
application_name='freeswitch'")

(as recommended in the docs at:
https://freeswitch.org/confluence/display/FREESWITCH/FreeSWITCH+Databases )

It has been working flawlessly, even across FreeSWITCH service restarts,
then I foolishly did a `sudo apt update && sudo apt upgrade` on Debian 9,
and that was it.

Would you recommend some steps on how I could troubleshoot this further?
The error message is too generic.

What I did so far:

0. Server reboot, call to server connects, Lua script works as intended,
but fails at the DB part.

1. Checked the database on the remote server, it works fine.

2. Checked whether port is still open on remote server from the freeswitch
server with `nc -zv 1.2.3.4 5432` and it is.

Thank you for any suggestions!

Appreciatively,
Attila
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.freeswitch.org/pipermail/freeswitch-users/attachments/20190823/7711414c/attachment.html>

From david.villasmil.work at gmail.com  Fri Aug 23 18:16:22 2019
From: david.villasmil.work at gmail.com (David Villasmil)
Date: Fri, 23 Aug 2019 20:16:22 +0200
Subject: [Freeswitch-users] Kernel error
Message-ID: <CAFGRPVrreugvK7sa00OfxtxkMa5H_rfE7Qex7xFZJQHSMPFugw@mail.gmail.com>

Hello all,

I got a kernel error today:

kernel: [2145601.469472] INFO: task freeswitch:1589 blocked for more
than 120 seconds.

kernel: [2145601.473832]       Not tainted 3.16.0-7-amd64 #1

kernel: [2145601.476781] "echo 0 >
/proc/sys/kernel/hung_task_timeout_secs" disables this

kernel: [2145601.481780] freeswitch      D ffffffff810a19c6     0
1589      1 0x00000000

kernel: [2145601.486345]  ffff88008e301490 0000000000000086
0000000000014000 ffff8800ea02b

kernel: [2145601.491304]  0000000000014000 ffff88008e301490
ffff8800efc348b0 ffff8800effda

kernel: [2145601.496294]  0000000000000002 ffffffffa00f06f0
ffff8800ea02bb20 ffff8800e9c4c

kernel: [2145601.501373] Call Trace:

kernel: [2145601.503039]  [<ffffffffa00f06f0>] ?
start_this_handle+0x5d0/0x5d0 [jbd2]

kernel: [2145601.507213]  [<ffffffff8153711b>] ? io_schedule+0xab/0x140

kernel: [2145601.510700]  [<ffffffffa00f06fa>] ?
sleep_on_shadow_bh+0xa/0x10 [jbd2]

kernel: [2145601.514798]  [<ffffffff815374ee>] ? __wait_on_bit+0x5e/0x90

kernel: [2145601.518320]  [<ffffffffa00f06f0>] ?
start_this_handle+0x5d0/0x5d0 [jbd2]

kernel: [2145601.522560]  [<ffffffff81537597>] ?
out_of_line_wait_on_bit+0x77/0x90

kernel: [2145601.526611]  [<ffffffff810afa70>] ?
autoremove_wake_function+0x30/0x30

kernel: [2145601.530704]  [<ffffffff811ea9cc>] ? __find_get_block+0xbc/0x260

kernel: [2145601.534503]  [<ffffffffa00f1b75>] ?
do_get_write_access+0x275/0x4e0 [jbd2]

kernel: [2145601.538490]  [<ffffffff811eae56>] ? __getblk_gfp+0x26/0x60

kernel: [2145601.541563]  [<ffffffffa011552b>] ?
ext4_dirty_inode+0x3b/0x60 [ext4]

kernel: [2145601.545135]  [<ffffffffa00f1e02>] ?
jbd2_journal_get_write_access+0x22/0x40 [

kernel: [2145601.549586]  [<ffffffffa013d636>] ?
__ext4_journal_get_write_access+0x36/0x80

kernel: [2145601.554118]  [<ffffffffa0111f80>] ?
ext4_reserve_inode_write+0x60/0x80 [ext4]

kernel: [2145601.558251]  [<ffffffffa0111fdf>] ?
ext4_mark_inode_dirty+0x3f/0x1f0 [ext4]

kernel: [2145601.562161]  [<ffffffffa011552b>] ?
ext4_dirty_inode+0x3b/0x60 [ext4]

kernel: [2145601.565619]  [<ffffffff811e31fc>] ? __mark_inode_dirty+0x16c/0x2c0

kernel: [2145601.569045]  [<ffffffff811d2fa9>] ? update_time+0x89/0xc0

kernel: [2145601.572339]  [<ffffffff811d31a3>] ? file_update_time+0x83/0xd0

kernel: [2145601.575806]  [<ffffffff8114a8b8>] ?
__generic_file_write_iter+0x1b8/0x3c0

kernel: [2145601.579850]  [<ffffffff81536903>] ? __schedule+0x233/0x740

kernel: [2145601.583479]  [<ffffffffa0108d20>] ?
ext4_file_write_iter+0x100/0x3e0 [ext4]

kernel: [2145601.587722]  [<ffffffff81536903>] ? __schedule+0x233/0x740

kernel: [2145601.590891]  [<ffffffff8153690f>] ? __schedule+0x23f/0x740

kernel: [2145601.593958]  [<ffffffff8153690f>] ? __schedule+0x23f/0x740

kernel: [2145601.597353]  [<ffffffff81536903>] ? __schedule+0x233/0x740

kernel: [2145601.599562]  [<ffffffff8153690f>] ? __schedule+0x23f/0x740

kernel: [2145601.601874]  [<ffffffff81536903>] ? __schedule+0x233/0x740

kernel: [2145601.605203]  [<ffffffff8153690f>] ? __schedule+0x23f/0x740

kernel: [2145601.608712]  [<ffffffff81536903>] ? __schedule+0x233/0x740

kernel: [2145601.612189]  [<ffffffff812ca038>] ? timerqueue_add+0x58/0xa0

kernel: [2145601.615786]  [<ffffffff810915b1>] ? enqueue_hrtimer+0x21/0xa0

kernel: [2145601.619516]  [<ffffffff811b751a>] ? new_sync_write+0x7a/0xb0

kernel: [2145601.623227]  [<ffffffff811b7cb5>] ? vfs_write+0xb5/0x1f0

kernel: [2145601.626683]  [<ffffffff811b7bac>] ? vfs_read+0x11c/0x170

kernel: [2145601.630119]  [<ffffffff811b8802>] ? SyS_write+0x42/0xa0

kernel: [2145601.633491]  [<ffffffff8153ae1c>] ?
system_call_fast_compare_end+0x1c/0x21



This is on an AWS ec2 t2 large instance...

Regards,

David Villasmil
email: david.villasmil.work at gmail.com
phone: +34669448337
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.freeswitch.org/pipermail/freeswitch-users/attachments/20190823/0d874c22/attachment-0001.html>

From mike at freeswitch.com  Fri Aug 23 18:20:08 2019
From: mike at freeswitch.com (Mike Jerris)
Date: Fri, 23 Aug 2019 12:20:08 -0600
Subject: [Freeswitch-users] session is nil
In-Reply-To: <CADwb5P2-Lu4P26QK9T6TUzj1nEvzTZPqVArvfXHb0xbqZk+4SA@mail.gmail.com>
References: <CADwb5P2-Lu4P26QK9T6TUzj1nEvzTZPqVArvfXHb0xbqZk+4SA@mail.gmail.com>
Message-ID: <CADrq_yG0xGQ4a8TTtcTKx4wvNaU3tmVwJa8rPJC1yNiQdcM4MA@mail.gmail.com>

using lua api you have no session.  from the app that would make more sense

On Fri, Aug 23, 2019 at 11:23 AM Sajad Tahernejad <sajad at tahernejad.com>
wrote:

> Hi,
> I want use session:playAndGetDigits in position lua script, but gived me
> this error
> /scripts/lua/callcenter-announce-position.lua:39: attempt to index global
> 'session' (a nil value)
> Please help me
> Thanks.
> _________________________________________________________________________
>
> The FreeSWITCH project is sponsored by SignalWire https://signalwire.com
> Enhance your FreeSWITCH install with disruptive priced SMS and PSTN
> services.
> Build your next product on our scalable cloud platform.
>
> Join our online community to chat in real time
> https://signalwire.community
>
> Professional FreeSWITCH Services
> sales at freeswitch.com
> https://freeswitch.com
>
> Official FreeSWITCH Sites
> https://freeswitch.com/oss
> https://freeswitch.org/confluence
> https://cluecon.com
>
> FreeSWITCH-users mailing list
> FreeSWITCH-users at lists.freeswitch.org
> http://lists.freeswitch.org/mailman/listinfo/freeswitch-users
> UNSUBSCRIBE:http://lists.freeswitch.org/mailman/options/freeswitch-users
> https://freeswitch.com
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.freeswitch.org/pipermail/freeswitch-users/attachments/20190823/35132802/attachment.html>

From mike at freeswitch.com  Fri Aug 23 18:22:55 2019
From: mike at freeswitch.com (Mike Jerris)
Date: Fri, 23 Aug 2019 12:22:55 -0600
Subject: [Freeswitch-users] Run freeswitch with supplementary groups to
 solver permission problems
In-Reply-To: <trinity-d04eef65-cfc2-4fb0-8491-2076ae582960-1566385618400@3c-app-webde-bap38>
References: <trinity-d04eef65-cfc2-4fb0-8491-2076ae582960-1566385618400@3c-app-webde-bap38>
Message-ID: <CADrq_yEEgMvAXDxiRpe0igx1a-rKLyfXvT7TRNcD2h97MkmkfQ@mail.gmail.com>

freeswitch typically starts as root to set certain system settings then
drops perms to the -u and -g params passed.  if you want to not drop perms
you don’t use -u and -g but then you need to make sure all that stuff is
set properly first.  you will have to dig in code for everything we set but
there are things for the scheduler for sure that won’t work without right
perms in place at startup

On Fri, Aug 23, 2019 at 11:23 AM <stevie.holpp at web.de> wrote:

>
> Hey folks :-),
>
> first time I am here. Installed freeswitch a few months ago to receive and
> send faxes. But I had some "permission error" recently for receiving a fax
> unless I run freeswitch as root user. I tried to use the "
> *SUPPLEMENTARYGROUPS=*" setting in my systemd config file, but this
> didn't help.
>
> Basically the problem is this: I need freeswitch to write to some
> /var/spool/fax folder, and therefore I added the group "uucp" additionally
> to the user "freeswitch". So it's default group is the group "freeswitch",
> and "uucp" is a supplementary group of it.
> I however noticed that, the freeswitch process doesn't honor any
> supplementary groups, just the UID and the default group id. I verified
> this via the "ps" command:
>
>
> *root at jupiter:/tmp# ps -axo ppid,pid,uid,egid,supgid,cmd  | grep
> freeswitch     1  2518   999    10                      /usr/bin/freeswitch
> -u freeswitch -g uucp -ncwait -nonat*
>
> Why is this so? - is it the fault of freeswitch or of my systemd service
> configuration of freeswitch?
>
> cheers
> Steve
>
>
>
> I am running Debian buster and the latest release of freeswitch, so my
> systemd service config for freeswitch looked like that:
>
>
>
>
>
> *[Unit] Description=freeswitch Wants=network-online.target
> Requires=network.target local-fs.target After=network.target
> network-online.target local-fs.target*
>
>
>
>
>
>
>
>
>
>
>
>
>
>
> *[Service] ; service Type=forking PIDFile=/run/freeswitch/freeswitch.pid
> Environment="DAEMON_OPTS=-nonat" Environment="USER=freeswitch"
> Environment="GROUP=freeswitch" EnvironmentFile=-/etc/default/freeswitch
> ExecStartPre=/bin/chown -R ${USER}:${GROUP} /var/lib/freeswitch
> /var/log/freeswitch /etc/freeswitch /usr/share/freeswitch
> /var/run/freeswitch ExecStart=/usr/bin/freeswitch -u ${USER} -g ${GROUP}
> -ncwait ${DAEMON_OPTS} TimeoutSec=45s Restart=always ; exec ;User=${USER}
> ;Group=${GROUP}*
>
>
> And I tried to add supplementary groups by adding:
>
> *"SupplementaryGroups=freeswitch uucp"*
> after "PIDFILE=" line.
>
>
> _________________________________________________________________________
>
> The FreeSWITCH project is sponsored by SignalWire https://signalwire.com
> Enhance your FreeSWITCH install with disruptive priced SMS and PSTN
> services.
> Build your next product on our scalable cloud platform.
>
> Join our online community to chat in real time
> https://signalwire.community
>
> Professional FreeSWITCH Services
> sales at freeswitch.com
> https://freeswitch.com
>
> Official FreeSWITCH Sites
> https://freeswitch.com/oss
> https://freeswitch.org/confluence
> https://cluecon.com
>
> FreeSWITCH-users mailing list
> FreeSWITCH-users at lists.freeswitch.org
> http://lists.freeswitch.org/mailman/listinfo/freeswitch-users
> UNSUBSCRIBE:http://lists.freeswitch.org/mailman/options/freeswitch-users
> https://freeswitch.com
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.freeswitch.org/pipermail/freeswitch-users/attachments/20190823/9a1af4fe/attachment.html>

From alex at freeswitch.com  Fri Aug 23 19:04:37 2019
From: alex at freeswitch.com (Alexey Sibyakin)
Date: Sat, 24 Aug 2019 04:04:37 +0900
Subject: [Freeswitch-users] upgrade freeswtich 1.4.26~37-1~jessie+1 i386
 to freeswitch_1.10.1 amd64
In-Reply-To: <e55cca19-8de7-d848-3925-e31d0ed58d91@powercraft.nl>
References: <e55cca19-8de7-d848-3925-e31d0ed58d91@powercraft.nl>
Message-ID: <CAGJLwFgUbgZOysVLEeSLfGdL-VWFQgSnzhmEE-U0=xzHQtT17w@mail.gmail.com>

Hello,

You don't need 1.6 or 1.8, just go straight to 1.10.

There are some changes, the biggest one related to moving Postgres support
from the core to preloaded modules.

More info:
https://freeswitch.org/confluence/display/FREESWITCH/FreeSWITCH+1.10.x+Release+notes

You can install some dummy 1.10 box before the upgrade and copy your
current config (ofc. you will need to some minor adjustments e.g.
IP-addresses) and see what you've got.

Best regards,


Alex



Alex Sibyakin | Support Engineer SignalWire | 228 Hamilton Ave 3rd Floor,
Palo Alto, CA 94303 Email: alex at freeswitch.com Website:
https://www.signalwire.com



On Sat, Aug 24, 2019 at 3:32 AM Jelle de Jong <jelledejong at powercraft.nl>
wrote:

> Hello everybody,
>
> I just found out my freeswitch was not updating because I had a i386
> version and all new versions where amd64.
>
> I can change to a amd64 buster version, but I would like to know what
> configuration issues I will be going to have.
>
> Is there an upgrade script from 1.4 to 1.10 (or do I need to upgrade to
> 1.8 or 1.6 first?).
>
> How can I keep the current configuration working? and if not is there a
> documentation page to make this move easier?
>
> Kind regards,
>
> Jelle de Jong
>
> --
>
> freeswitch_1.10.1~release~12~f9990221e6~buster-1~buster+1_amd64.deb
>
> freeswitch-meta-all_1.10.1~release~12~f9990221e6~buster-1~buster+1_amd64.deb
>
> _________________________________________________________________________
>
> The FreeSWITCH project is sponsored by SignalWire https://signalwire.com
> Enhance your FreeSWITCH install with disruptive priced SMS and PSTN
> services.
> Build your next product on our scalable cloud platform.
>
> Join our online community to chat in real time
> https://signalwire.community
>
> Professional FreeSWITCH Services
> sales at freeswitch.com
> https://freeswitch.com
>
> Official FreeSWITCH Sites
> https://freeswitch.com/oss
> https://freeswitch.org/confluence
> https://cluecon.com
>
> FreeSWITCH-users mailing list
> FreeSWITCH-users at lists.freeswitch.org
> http://lists.freeswitch.org/mailman/listinfo/freeswitch-users
> UNSUBSCRIBE:http://lists.freeswitch.org/mailman/options/freeswitch-users
> https://freeswitch.com
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.freeswitch.org/pipermail/freeswitch-users/attachments/20190824/dc5261f0/attachment.html>

From mike at freeswitch.com  Fri Aug 23 19:10:03 2019
From: mike at freeswitch.com (Mike Jerris)
Date: Fri, 23 Aug 2019 13:10:03 -0600
Subject: [Freeswitch-users] upgrade freeswtich 1.4.26~37-1~jessie+1 i386
 to freeswitch_1.10.1 amd64
In-Reply-To: <CAGJLwFgUbgZOysVLEeSLfGdL-VWFQgSnzhmEE-U0=xzHQtT17w@mail.gmail.com>
References: <e55cca19-8de7-d848-3925-e31d0ed58d91@powercraft.nl>
 <CAGJLwFgUbgZOysVLEeSLfGdL-VWFQgSnzhmEE-U0=xzHQtT17w@mail.gmail.com>
Message-ID: <CADrq_yHK3nDe=z-AupZHKFYVXhDT=2+tErxKzm0Em5prEYzCkw@mail.gmail.com>

the other 2 notable breaking changes since 1.4 off the top of my head ...
the var for mixing codecs in offer and the t38 settings.  also a few vars
used to be named sip_ and are now rtp_



On Fri, Aug 23, 2019 at 1:05 PM Alexey Sibyakin <alex at freeswitch.com> wrote:

> Hello,
>
> You don't need 1.6 or 1.8, just go straight to 1.10.
>
> There are some changes, the biggest one related to moving Postgres support
> from the core to preloaded modules.
>
> More info:
> https://freeswitch.org/confluence/display/FREESWITCH/FreeSWITCH+1.10.x+Release+notes
>
> You can install some dummy 1.10 box before the upgrade and copy your
> current config (ofc. you will need to some minor adjustments e.g.
> IP-addresses) and see what you've got.
>
> Best regards,
>
>
> Alex
>
>
>
> Alex Sibyakin | Support Engineer SignalWire | 228 Hamilton Ave 3rd Floor,
> Palo Alto, CA 94303
> <https://www.google.com/maps/search/228+Hamilton+Ave+3rd+Floor,+Palo+Alto,+CA+94303?entry=gmail&source=g>
> Email: alex at freeswitch.com Website: https://www.signalwire.com
>
>
>
> On Sat, Aug 24, 2019 at 3:32 AM Jelle de Jong <jelledejong at powercraft.nl>
> wrote:
>
>> Hello everybody,
>>
>> I just found out my freeswitch was not updating because I had a i386
>> version and all new versions where amd64.
>>
>> I can change to a amd64 buster version, but I would like to know what
>> configuration issues I will be going to have.
>>
>> Is there an upgrade script from 1.4 to 1.10 (or do I need to upgrade to
>> 1.8 or 1.6 first?).
>>
>> How can I keep the current configuration working? and if not is there a
>> documentation page to make this move easier?
>>
>> Kind regards,
>>
>> Jelle de Jong
>>
>> --
>>
>> freeswitch_1.10.1~release~12~f9990221e6~buster-1~buster+1_amd64.deb
>>
>> freeswitch-meta-all_1.10.1~release~12~f9990221e6~buster-1~buster+1_amd64.deb
>>
>> _________________________________________________________________________
>>
>> The FreeSWITCH project is sponsored by SignalWire https://signalwire.com
>> Enhance your FreeSWITCH install with disruptive priced SMS and PSTN
>> services.
>> Build your next product on our scalable cloud platform.
>>
>> Join our online community to chat in real time
>> https://signalwire.community
>>
>> Professional FreeSWITCH Services
>> sales at freeswitch.com
>> https://freeswitch.com
>>
>> Official FreeSWITCH Sites
>> https://freeswitch.com/oss
>> https://freeswitch.org/confluence
>> https://cluecon.com
>>
>> FreeSWITCH-users mailing list
>> FreeSWITCH-users at lists.freeswitch.org
>> http://lists.freeswitch.org/mailman/listinfo/freeswitch-users
>> UNSUBSCRIBE:http://lists.freeswitch.org/mailman/options/freeswitch-users
>> https://freeswitch.com
>
> _________________________________________________________________________
>
> The FreeSWITCH project is sponsored by SignalWire https://signalwire.com
> Enhance your FreeSWITCH install with disruptive priced SMS and PSTN
> services.
> Build your next product on our scalable cloud platform.
>
> Join our online community to chat in real time
> https://signalwire.community
>
> Professional FreeSWITCH Services
> sales at freeswitch.com
> https://freeswitch.com
>
> Official FreeSWITCH Sites
> https://freeswitch.com/oss
> https://freeswitch.org/confluence
> https://cluecon.com
>
> FreeSWITCH-users mailing list
> FreeSWITCH-users at lists.freeswitch.org
> http://lists.freeswitch.org/mailman/listinfo/freeswitch-users
> UNSUBSCRIBE:http://lists.freeswitch.org/mailman/options/freeswitch-users
> https://freeswitch.com
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.freeswitch.org/pipermail/freeswitch-users/attachments/20190823/bb08fef5/attachment-0001.html>

From sajad at tahernejad.com  Fri Aug 23 19:23:31 2019
From: sajad at tahernejad.com (Sajad Tahernejad)
Date: Fri, 23 Aug 2019 23:53:31 +0430
Subject: [Freeswitch-users] session is nil
In-Reply-To: <CADrq_yG0xGQ4a8TTtcTKx4wvNaU3tmVwJa8rPJC1yNiQdcM4MA@mail.gmail.com>
References: <CADwb5P2-Lu4P26QK9T6TUzj1nEvzTZPqVArvfXHb0xbqZk+4SA@mail.gmail.com>
 <CADrq_yG0xGQ4a8TTtcTKx4wvNaU3tmVwJa8rPJC1yNiQdcM4MA@mail.gmail.com>
Message-ID: <CADwb5P1LyNo1Oqy=f4AqPrhoes0vY0xke1+qgbzgfKyM7mPUEQ@mail.gmail.com>

Thanks.
Please explain more,
I want transfered a session if 10th or more in queue with
session:transfer("3000", "XML", "default");
Can you help more ?
I'm using lua api from
https://freeswitch.org/confluence/display/FREESWITCH/Lua+API+Reference
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.freeswitch.org/pipermail/freeswitch-users/attachments/20190823/3dd4e09f/attachment.html>

From toraritte at gmail.com  Sat Aug 24 03:06:39 2019
From: toraritte at gmail.com (=?UTF-8?Q?Guly=C3=A1s_Attila?=)
Date: Fri, 23 Aug 2019 20:06:39 -0700
Subject: [Freeswitch-users] lua freeswitch.Dbh "ERR [unable to open
	database file]"
In-Reply-To: <CADnELphi+CfCvpBiATh-MNpewDneZXbb-oui2-0bj7EeTaJP6w@mail.gmail.com>
References: <CADnELphi+CfCvpBiATh-MNpewDneZXbb-oui2-0bj7EeTaJP6w@mail.gmail.com>
Message-ID: <CADnELpjOqSHbmwQDrTo_=nCofOquyqfoxhVR5Oh_U2JiKFrLEw@mail.gmail.com>

Found the solution in the Debian 9 installation guide
(https://freeswitch.org/confluence/display/FREESWITCH/Debian+9+Stretch)
while I was rebuilding a new VM. Basically I inadvertently upgraded
FreeSWITCH 1.8 to 1.10, and needed to load `mod_pgsql` (see the
excerpt below).

1.10 incompatible change
====================
because now Fs1.10 packages are installed even if you still use the
1.8 repo, you better aware of an incompatible change:
pgsql is no more in core, but in aptly named mod_pgsql.
You MUST NOT load mod_pgsql in modules.conf.xml (do not work), but in
a special additional xml file, in same "autoload_configs" directory.

Filename: pre_load_modules.conf.xml
pre_load_modules.conf.xml
<configuration name="pre_load_modules.conf" description="Modules">
  <modules>
    <!-- Databases -->
    <!-- <load module="mod_mariadb"/> -->
    <load module="mod_pgsql"/>
  </modules>
</configuration>

On Fri, Aug 23, 2019 at 3:49 AM Gulyás Attila <toraritte at gmail.com> wrote:
>
> Hi,
>
> When I try to connect to a remote PostgreSQL server, I get
>
>     2019-08-23 10:19:05.793364 [ERR] switch_core_db.c:223 SQL ERR [unable to open database file]
>
> when using the Lua API
>
>    freeswitch.Dbh("pgsql://hostaddr=1.2.3.4 dbname=mydb user=postgres password=postgres options='-c client_min_messages=NOTICE' application_name='freeswitch'")
>
> (as recommended in the docs at: https://freeswitch.org/confluence/display/FREESWITCH/FreeSWITCH+Databases )
>
> It has been working flawlessly, even across FreeSWITCH service restarts, then I foolishly did a `sudo apt update && sudo apt upgrade` on Debian 9, and that was it.
>
> Would you recommend some steps on how I could troubleshoot this further? The error message is too generic.
>
> What I did so far:
>
> 0. Server reboot, call to server connects, Lua script works as intended, but fails at the DB part.
>
> 1. Checked the database on the remote server, it works fine.
>
> 2. Checked whether port is still open on remote server from the freeswitch server with `nc -zv 1.2.3.4 5432` and it is.
>
> Thank you for any suggestions!
>
> Appreciatively,
> Attila


From gmaruzz at gmail.com  Sat Aug 24 07:17:19 2019
From: gmaruzz at gmail.com (Giovanni Maruzzelli)
Date: Sat, 24 Aug 2019 09:17:19 +0200
Subject: [Freeswitch-users] lua freeswitch.Dbh "ERR [unable to open
 database file]"
In-Reply-To: <CADnELpjOqSHbmwQDrTo_=nCofOquyqfoxhVR5Oh_U2JiKFrLEw@mail.gmail.com>
References: <CADnELphi+CfCvpBiATh-MNpewDneZXbb-oui2-0bj7EeTaJP6w@mail.gmail.com>
 <CADnELpjOqSHbmwQDrTo_=nCofOquyqfoxhVR5Oh_U2JiKFrLEw@mail.gmail.com>
Message-ID: <CALXCt0o2Aam11focgJnR0FOEhoukwnuK4=h9eN_fYoMLYRBdfQ@mail.gmail.com>

hehehe, glad you found it...



On Sat, Aug 24, 2019 at 5:07 AM Gulyás Attila <toraritte at gmail.com> wrote:

> Found the solution in the Debian 9 installation guide
> (https://freeswitch.org/confluence/display/FREESWITCH/Debian+9+Stretch)
> while I was rebuilding a new VM. Basically I inadvertently upgraded
> FreeSWITCH 1.8 to 1.10, and needed to load `mod_pgsql` (see the
> excerpt below).
>
> 1.10 incompatible change
> ====================
> because now Fs1.10 packages are installed even if you still use the
> 1.8 repo, you better aware of an incompatible change:
> pgsql is no more in core, but in aptly named mod_pgsql.
> You MUST NOT load mod_pgsql in modules.conf.xml (do not work), but in
> a special additional xml file, in same "autoload_configs" directory.
>
> Filename: pre_load_modules.conf.xml
> pre_load_modules.conf.xml
> <configuration name="pre_load_modules.conf" description="Modules">
>   <modules>
>     <!-- Databases -->
>     <!-- <load module="mod_mariadb"/> -->
>     <load module="mod_pgsql"/>
>   </modules>
> </configuration>
>
> On Fri, Aug 23, 2019 at 3:49 AM Gulyás Attila <toraritte at gmail.com> wrote:
> >
> > Hi,
> >
> > When I try to connect to a remote PostgreSQL server, I get
> >
> >     2019-08-23 10:19:05.793364 [ERR] switch_core_db.c:223 SQL ERR
> [unable to open database file]
> >
> > when using the Lua API
> >
> >    freeswitch.Dbh("pgsql://hostaddr=1.2.3.4 dbname=mydb user=postgres
> password=postgres options='-c client_min_messages=NOTICE'
> application_name='freeswitch'")
> >
> > (as recommended in the docs at:
> https://freeswitch.org/confluence/display/FREESWITCH/FreeSWITCH+Databases
> )
> >
> > It has been working flawlessly, even across FreeSWITCH service restarts,
> then I foolishly did a `sudo apt update && sudo apt upgrade` on Debian 9,
> and that was it.
> >
> > Would you recommend some steps on how I could troubleshoot this further?
> The error message is too generic.
> >
> > What I did so far:
> >
> > 0. Server reboot, call to server connects, Lua script works as intended,
> but fails at the DB part.
> >
> > 1. Checked the database on the remote server, it works fine.
> >
> > 2. Checked whether port is still open on remote server from the
> freeswitch server with `nc -zv 1.2.3.4 5432` and it is.
> >
> > Thank you for any suggestions!
> >
> > Appreciatively,
> > Attila
>
> _________________________________________________________________________
>
> The FreeSWITCH project is sponsored by SignalWire https://signalwire.com
> Enhance your FreeSWITCH install with disruptive priced SMS and PSTN
> services.
> Build your next product on our scalable cloud platform.
>
> Join our online community to chat in real time
> https://signalwire.community
>
> Professional FreeSWITCH Services
> sales at freeswitch.com
> https://freeswitch.com
>
> Official FreeSWITCH Sites
> https://freeswitch.com/oss
> https://freeswitch.org/confluence
> https://cluecon.com
>
> FreeSWITCH-users mailing list
> FreeSWITCH-users at lists.freeswitch.org
> http://lists.freeswitch.org/mailman/listinfo/freeswitch-users
> UNSUBSCRIBE:http://lists.freeswitch.org/mailman/options/freeswitch-users
> https://freeswitch.com



-- 
Sincerely,

Giovanni Maruzzelli
OpenTelecom.IT
cell: +39 347 266 56 18
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.freeswitch.org/pipermail/freeswitch-users/attachments/20190824/677850f4/attachment.html>

From gmaruzz at gmail.com  Sat Aug 24 07:30:28 2019
From: gmaruzz at gmail.com (Giovanni Maruzzelli)
Date: Sat, 24 Aug 2019 09:30:28 +0200
Subject: [Freeswitch-users] session is nil
In-Reply-To: <CADwb5P1LyNo1Oqy=f4AqPrhoes0vY0xke1+qgbzgfKyM7mPUEQ@mail.gmail.com>
References: <CADwb5P2-Lu4P26QK9T6TUzj1nEvzTZPqVArvfXHb0xbqZk+4SA@mail.gmail.com>
 <CADrq_yG0xGQ4a8TTtcTKx4wvNaU3tmVwJa8rPJC1yNiQdcM4MA@mail.gmail.com>
 <CADwb5P1LyNo1Oqy=f4AqPrhoes0vY0xke1+qgbzgfKyM7mPUEQ@mail.gmail.com>
Message-ID: <CALXCt0ouMg8RbTkW2hNJ5+km_vVamQP42XgjU4Y_yqszYWryZQ@mail.gmail.com>

Sajad,

just to be explicit:

in FreeSWITCH, when a person say "API" it means "sending a command from the
freeswitch command line" (and you *can* execute lua from freeswitch command
line)

maybe, you are executing a LUA script from dialplan or configuration, so
you are not using the freeswitch API

in that case, you are executing a lua script from dialplan. That lua script
is written to execute the lua API to interact with freeswitch

in that case, for clarity, in future, you want to write: "I am executing a
lua script"

If a lua script is started from dialplan, it always has a session object,
until the call is hangup

the other case: if a lua script is started from the command line (eg, from
the freeswitch API) it never has a session object, you must create it
getting the uuid of the call from the freeswitch API (or because you know
in advance the call uuid because you originated that call giving the uuid
as parameter).



On Fri, Aug 23, 2019 at 9:42 PM Sajad Tahernejad <sajad at tahernejad.com>
wrote:

> Thanks.
> Please explain more,
> I want transfered a session if 10th or more in queue with
> session:transfer("3000", "XML", "default");
> Can you help more ?
> I'm using lua api from
> https://freeswitch.org/confluence/display/FREESWITCH/Lua+API+Reference
> _________________________________________________________________________
>
> The FreeSWITCH project is sponsored by SignalWire https://signalwire.com
> Enhance your FreeSWITCH install with disruptive priced SMS and PSTN
> services.
> Build your next product on our scalable cloud platform.
>
> Join our online community to chat in real time
> https://signalwire.community
>
> Professional FreeSWITCH Services
> sales at freeswitch.com
> https://freeswitch.com
>
> Official FreeSWITCH Sites
> https://freeswitch.com/oss
> https://freeswitch.org/confluence
> https://cluecon.com
>
> FreeSWITCH-users mailing list
> FreeSWITCH-users at lists.freeswitch.org
> http://lists.freeswitch.org/mailman/listinfo/freeswitch-users
> UNSUBSCRIBE:http://lists.freeswitch.org/mailman/options/freeswitch-users
> https://freeswitch.com



-- 
Sincerely,

Giovanni Maruzzelli
OpenTelecom.IT
cell: +39 347 266 56 18
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.freeswitch.org/pipermail/freeswitch-users/attachments/20190824/3a551a21/attachment-0001.html>

From sajad at tahernejad.com  Sat Aug 24 10:03:40 2019
From: sajad at tahernejad.com (Sajad Tahernejad)
Date: Sat, 24 Aug 2019 14:33:40 +0430
Subject: [Freeswitch-users] session is nil
In-Reply-To: <CALXCt0ouMg8RbTkW2hNJ5+km_vVamQP42XgjU4Y_yqszYWryZQ@mail.gmail.com>
References: <CADwb5P2-Lu4P26QK9T6TUzj1nEvzTZPqVArvfXHb0xbqZk+4SA@mail.gmail.com>
 <CADrq_yG0xGQ4a8TTtcTKx4wvNaU3tmVwJa8rPJC1yNiQdcM4MA@mail.gmail.com>
 <CADwb5P1LyNo1Oqy=f4AqPrhoes0vY0xke1+qgbzgfKyM7mPUEQ@mail.gmail.com>
 <CALXCt0ouMg8RbTkW2hNJ5+km_vVamQP42XgjU4Y_yqszYWryZQ@mail.gmail.com>
Message-ID: <CADwb5P34LRY6=QW4bSoPHpgUC3hWgCXwkm+j89A8Vts84qJXPg@mail.gmail.com>

Very thanks,
Solved by *session = freeswitch.Session(uuid);*
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.freeswitch.org/pipermail/freeswitch-users/attachments/20190824/da35ea99/attachment.html>

From sdevoy at bizfocused.com  Sun Aug 25 23:58:19 2019
From: sdevoy at bizfocused.com (Sean Devoy)
Date: Sun, 25 Aug 2019 23:58:19 +0000
Subject: [Freeswitch-users] mod_db values
Message-ID: <BN6PR0101MB2850C32C9B165C091D1916F3BBA60@BN6PR0101MB2850.prod.exchangelabs.com>

Hi,

I am using the latest Debian distro.  I am proficient with SQL.  How can I access the data that has been inserted using application="db" data="insert/..."?

I am fine to use either a command line login or XML dial plan?  If it is by command line I will need some help getting connected/authenticated.  I don't even know which database the default distro uses.

Thanks,
Sean
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.freeswitch.org/pipermail/freeswitch-users/attachments/20190825/139c8e28/attachment.html>

From kaduww at gmail.com  Mon Aug 26 01:32:15 2019
From: kaduww at gmail.com (Carlos Eduardo)
Date: Sun, 25 Aug 2019 22:32:15 -0300
Subject: [Freeswitch-users] mod_db values
In-Reply-To: <BN6PR0101MB2850C32C9B165C091D1916F3BBA60@BN6PR0101MB2850.prod.exchangelabs.com>
References: <BN6PR0101MB2850C32C9B165C091D1916F3BBA60@BN6PR0101MB2850.prod.exchangelabs.com>
Message-ID: <CAB=EceaZz2B5YT478UAZ2_ada5OwczNrR6E-qYdcgq18i71LaQ@mail.gmail.com>

By default, mod_db uses sqlite to store data, so you can access these
files, usually on /usr/local/freeswitch/db (when manually compiled).

You can also configure mod_db to store on another database engine, such as
PostgreSQL or MySQL (or MariaDB). This configuration is done at
[fs_config_path]/autoload_configs/db.conf.xml. Once its on your preferred
db engine, you can access the way you want.



Em dom, 25 de ago de 2019 às 20:59, Sean Devoy <sdevoy at bizfocused.com>
escreveu:

> Hi,
>
>
>
> I am using the latest Debian distro.  I am proficient with SQL.  How can I
> access the data that has been inserted using application=”db”
> data=”insert/…”?
>
>
>
> I am fine to use either a command line login or XML dial plan?  If it is
> by command line I will need some help getting connected/authenticated.  I
> don’t even know which database the default distro uses.
>
>
>
> Thanks,
>
> Sean
> _________________________________________________________________________
>
> The FreeSWITCH project is sponsored by SignalWire https://signalwire.com
> Enhance your FreeSWITCH install with disruptive priced SMS and PSTN
> services.
> Build your next product on our scalable cloud platform.
>
> Join our online community to chat in real time
> https://signalwire.community
>
> Professional FreeSWITCH Services
> sales at freeswitch.com
> https://freeswitch.com
>
> Official FreeSWITCH Sites
> https://freeswitch.com/oss
> https://freeswitch.org/confluence
> https://cluecon.com
>
> FreeSWITCH-users mailing list
> FreeSWITCH-users at lists.freeswitch.org
> http://lists.freeswitch.org/mailman/listinfo/freeswitch-users
> UNSUBSCRIBE:http://lists.freeswitch.org/mailman/options/freeswitch-users
> https://freeswitch.com



-- 
*Carlos E. Wagner*
*Tecnólogo em Telecomunicações, OCP, dCAA*

*E-mail:* *kaduww at gmail.com <kaduww at gmail.com>*
*Fone:* +55 48 9981-0894
*Skype:* carlos.e.wagner
www.blogdovoip.com
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.freeswitch.org/pipermail/freeswitch-users/attachments/20190825/456b6f39/attachment.html>

From cong.wang.itsherpa at gmail.com  Mon Aug 26 01:34:56 2019
From: cong.wang.itsherpa at gmail.com (=?utf-8?B?546L6IGh?=)
Date: Mon, 26 Aug 2019 10:34:56 +0900
Subject: [Freeswitch-users] FreeSWITCH IPv6 Support
Message-ID: <7EBBF0EC-5BE0-489A-BF7D-983C44DC7F77@gmail.com>

Hi all,

According to Apple and Google’s app review guideline, all apps need to support IPv6-only network, 
so I tried to enable ipv6 support on my freeswitch server.

In my development environment, a server with both ipv4 and ipv6 address is ready. 

Server Info:
Debian stretch 9.9
FreeSWITCH Version 1.8.7+git~20190702T200609Z~6047ebddfc~64bit (git 6047ebd 2019-07-02 20:06:09Z 64bit)

Also, profile external-ipv6 and internal-ipv6 for freeswitch had also enabled.
In addition, a pure-ipv6 network(no NAT64) is also ready for test.

As the test result, clients could access to server via ipv6-only network for registration(sip package showed in server with siptrack),
but failed to make calls in same network. 

Freeswitch log showed a failure in originate, which returned an 606 USER NOT REGISTERED. 
Both clients was showed in “show registrations” with correct ipv6 address, but Sofia couldn’t get contact string(got 606 in sofia_contact).

Is there any additional settings need for Sofia to enable ipv6 support? Any suggestion would be appreciated.

Regards.
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.freeswitch.org/pipermail/freeswitch-users/attachments/20190826/ffe4943f/attachment.html>

From brians at iptel.co  Wed Aug 28 17:56:55 2019
From: brians at iptel.co (Brian :)
Date: Wed, 28 Aug 2019 18:56:55 +0100
Subject: [Freeswitch-users]  Kernel error
In-Reply-To: <CAFGRPVrreugvK7sa00OfxtxkMa5H_rfE7Qex7xFZJQHSMPFugw@mail.gmail.com>
References: <CAFGRPVrreugvK7sa00OfxtxkMa5H_rfE7Qex7xFZJQHSMPFugw@mail.gmail.com>
Message-ID: <CAGPQfi-6+Sj4Sxhb+3gYDoME0=tL=+AFtR+sp_DCneT3Guatng@mail.gmail.com>

Hi David,

Some IO issue on that instance?



On Friday, August 23, 2019, David Villasmil <david.villasmil.work at gmail.com>
wrote:
> Hello all,
> I got a kernel error today:
>
> kernel: [2145601.469472] INFO: task freeswitch:1589 blocked for more than
120 seconds.
>
> kernel: [2145601.473832] Not tainted 3.16.0-7-amd64 #1
>
> kernel: [2145601.476781] "echo 0 >
/proc/sys/kernel/hung_task_timeout_secs" disables this
>
> kernel: [2145601.481780] freeswitch D ffffffff810a19c6 0 1589 1 0x00000000
>
> kernel: [2145601.486345] ffff88008e301490 0000000000000086
0000000000014000 ffff8800ea02b
>
> kernel: [2145601.491304] 0000000000014000 ffff88008e301490
ffff8800efc348b0 ffff8800effda
>
> kernel: [2145601.496294] 0000000000000002 ffffffffa00f06f0
ffff8800ea02bb20 ffff8800e9c4c
>
> kernel: [2145601.501373] Call Trace:
>
> kernel: [2145601.503039] [<ffffffffa00f06f0>] ?
start_this_handle+0x5d0/0x5d0 [jbd2]
>
> kernel: [2145601.507213] [<ffffffff8153711b>] ? io_schedule+0xab/0x140
>
> kernel: [2145601.510700] [<ffffffffa00f06fa>] ?
sleep_on_shadow_bh+0xa/0x10 [jbd2]
>
> kernel: [2145601.514798] [<ffffffff815374ee>] ? __wait_on_bit+0x5e/0x90
>
> kernel: [2145601.518320] [<ffffffffa00f06f0>] ?
start_this_handle+0x5d0/0x5d0 [jbd2]
>
> kernel: [2145601.522560] [<ffffffff81537597>] ?
out_of_line_wait_on_bit+0x77/0x90
>
> kernel: [2145601.526611] [<ffffffff810afa70>] ?
autoremove_wake_function+0x30/0x30
>
> kernel: [2145601.530704] [<ffffffff811ea9cc>] ?
__find_get_block+0xbc/0x260
>
> kernel: [2145601.534503] [<ffffffffa00f1b75>] ?
do_get_write_access+0x275/0x4e0 [jbd2]
>
> kernel: [2145601.538490] [<ffffffff811eae56>] ? __getblk_gfp+0x26/0x60
>
> kernel: [2145601.541563] [<ffffffffa011552b>] ?
ext4_dirty_inode+0x3b/0x60 [ext4]
>
> kernel: [2145601.545135] [<ffffffffa00f1e02>] ?
jbd2_journal_get_write_access+0x22/0x40 [
>
> kernel: [2145601.549586] [<ffffffffa013d636>] ?
__ext4_journal_get_write_access+0x36/0x80
>
> kernel: [2145601.554118] [<ffffffffa0111f80>] ?
ext4_reserve_inode_write+0x60/0x80 [ext4]
>
> kernel: [2145601.558251] [<ffffffffa0111fdf>] ?
ext4_mark_inode_dirty+0x3f/0x1f0 [ext4]
>
> kernel: [2145601.562161] [<ffffffffa011552b>] ?
ext4_dirty_inode+0x3b/0x60 [ext4]
>
> kernel: [2145601.565619] [<ffffffff811e31fc>] ?
__mark_inode_dirty+0x16c/0x2c0
>
> kernel: [2145601.569045] [<ffffffff811d2fa9>] ? update_time+0x89/0xc0
>
> kernel: [2145601.572339] [<ffffffff811d31a3>] ? file_update_time+0x83/0xd0
>
> kernel: [2145601.575806] [<ffffffff8114a8b8>] ?
__generic_file_write_iter+0x1b8/0x3c0
>
> kernel: [2145601.579850] [<ffffffff81536903>] ? __schedule+0x233/0x740
>
> kernel: [2145601.583479] [<ffffffffa0108d20>] ?
ext4_file_write_iter+0x100/0x3e0 [ext4]
>
> kernel: [2145601.587722] [<ffffffff81536903>] ? __schedule+0x233/0x740
>
> kernel: [2145601.590891] [<ffffffff8153690f>] ? __schedule+0x23f/0x740
>
> kernel: [2145601.593958] [<ffffffff8153690f>] ? __schedule+0x23f/0x740
>
> kernel: [2145601.597353] [<ffffffff81536903>] ? __schedule+0x233/0x740
>
> kernel: [2145601.599562] [<ffffffff8153690f>] ? __schedule+0x23f/0x740
>
> kernel: [2145601.601874] [<ffffffff81536903>] ? __schedule+0x233/0x740
>
> kernel: [2145601.605203] [<ffffffff8153690f>] ? __schedule+0x23f/0x740
>
> kernel: [2145601.608712] [<ffffffff81536903>] ? __schedule+0x233/0x740
>
> kernel: [2145601.612189] [<ffffffff812ca038>] ? timerqueue_add+0x58/0xa0
>
> kernel: [2145601.615786] [<ffffffff810915b1>] ? enqueue_hrtimer+0x21/0xa0
>
> kernel: [2145601.619516] [<ffffffff811b751a>] ? new_sync_write+0x7a/0xb0
>
> kernel: [2145601.623227] [<ffffffff811b7cb5>] ? vfs_write+0xb5/0x1f0
>
> kernel: [2145601.626683] [<ffffffff811b7bac>] ? vfs_read+0x11c/0x170
>
> kernel: [2145601.630119] [<ffffffff811b8802>] ? SyS_write+0x42/0xa0
>
> kernel: [2145601.633491] [<ffffffff8153ae1c>] ?
system_call_fast_compare_end+0x1c/0x21
>
> This is on an AWS ec2 t2 large instance...
> Regards,
> David Villasmil
> email: david.villasmil.work at gmail.com
> phone: +34669448337
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.freeswitch.org/pipermail/freeswitch-users/attachments/20190828/a55bc603/attachment.html>

From mario_fs at mgtech.com  Wed Aug 28 18:03:09 2019
From: mario_fs at mgtech.com (mario_fs)
Date: Wed, 28 Aug 2019 11:03:09 -0700
Subject: [Freeswitch-users] FreeSWITCH IPv6 Support
In-Reply-To: <7EBBF0EC-5BE0-489A-BF7D-983C44DC7F77@gmail.com>
References: <7EBBF0EC-5BE0-489A-BF7D-983C44DC7F77@gmail.com>
Message-ID: <266383AE-2881-41A6-8A9D-31DC42711F0E@mgtech.com>

Just an FYI if you use the MWI-Account setting. I had IPV6 working fine with calls in and out, but had to go back to IPV4. I use MWI to signal a VM message on multiple phones and that does not work for IPV6, see FS-9430 <https://freeswitch.org/jira/browse/FS-9430?filter=-2>, FS-9428 <https://freeswitch.org/jira/browse/FS-9428?filter=-2> and FS-10683 <https://freeswitch.org/jira/browse/FS-10683>(I need to update soon) which are still outstanding. So I had to finally give up and go back to IPV4. I had some other things not work right with IPV6 but it’s been a while and can’t remember them. But MWI was the killer for me.
Mario G

> On Aug 25, 2019, at 6:34 PM, 王聡 <cong.wang.itsherpa at gmail.com> wrote:
> 
> Hi all,
> 
> According to Apple and Google’s app review guideline, all apps need to support IPv6-only network, 
> so I tried to enable ipv6 support on my freeswitch server.
> 
> In my development environment, a server with both ipv4 and ipv6 address is ready. 
> 
> Server Info:
> Debian stretch 9.9
> FreeSWITCH Version 1.8.7+git~20190702T200609Z~6047ebddfc~64bit (git 6047ebd 2019-07-02 20:06:09Z 64bit)
> 
> Also, profile external-ipv6 and internal-ipv6 for freeswitch had also enabled.
> In addition, a pure-ipv6 network(no NAT64) is also ready for test.
> 
> As the test result, clients could access to server via ipv6-only network for registration(sip package showed in server with siptrack),
> but failed to make calls in same network. 
> 
> Freeswitch log showed a failure in originate, which returned an 606 USER NOT REGISTERED. 
> Both clients was showed in “show registrations” with correct ipv6 address, but Sofia couldn’t get contact string(got 606 in sofia_contact).
> 
> Is there any additional settings need for Sofia to enable ipv6 support? Any suggestion would be appreciated.
> 
> Regards.
> _________________________________________________________________________
> 
> The FreeSWITCH project is sponsored by SignalWire https://signalwire.com
> Enhance your FreeSWITCH install with disruptive priced SMS and PSTN services.
> Build your next product on our scalable cloud platform.
> 
> Join our online community to chat in real time https://signalwire.community
> 
> Professional FreeSWITCH Services
> sales at freeswitch.com
> https://freeswitch.com
> 
> Official FreeSWITCH Sites
> https://freeswitch.com/oss
> https://freeswitch.org/confluence
> https://cluecon.com
> 
> FreeSWITCH-users mailing list
> FreeSWITCH-users at lists.freeswitch.org
> http://lists.freeswitch.org/mailman/listinfo/freeswitch-users
> UNSUBSCRIBE:http://lists.freeswitch.org/mailman/options/freeswitch-users
> https://freeswitch.com

-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.freeswitch.org/pipermail/freeswitch-users/attachments/20190828/63132aaa/attachment.html>

From david.villasmil.work at gmail.com  Wed Aug 28 19:48:41 2019
From: david.villasmil.work at gmail.com (David Villasmil)
Date: Wed, 28 Aug 2019 21:48:41 +0200
Subject: [Freeswitch-users] Kernel error
In-Reply-To: <CAGPQfi-6+Sj4Sxhb+3gYDoME0=tL=+AFtR+sp_DCneT3Guatng@mail.gmail.com>
References: <CAFGRPVrreugvK7sa00OfxtxkMa5H_rfE7Qex7xFZJQHSMPFugw@mail.gmail.com>
 <CAGPQfi-6+Sj4Sxhb+3gYDoME0=tL=+AFtR+sp_DCneT3Guatng@mail.gmail.com>
Message-ID: <CAFGRPVqcwXbwgBNKw8BqGmrOU3e35cVRXFT_tbLhU0cGH6T5ew@mail.gmail.com>

Sounds like it. Hey was wondering whether anyone had run into that.

On Wed, 28 Aug 2019 at 20:10, Brian : <brians at iptel.co> wrote:

> Hi David,
>
> Some IO issue on that instance?
>
>
>
> On Friday, August 23, 2019, David Villasmil <
> david.villasmil.work at gmail.com> wrote:
> > Hello all,
> > I got a kernel error today:
> >
> > kernel: [2145601.469472] INFO: task freeswitch:1589 blocked for more
> than 120 seconds.
> >
> > kernel: [2145601.473832] Not tainted 3.16.0-7-amd64 #1
> >
> > kernel: [2145601.476781] "echo 0 >
> /proc/sys/kernel/hung_task_timeout_secs" disables this
> >
> > kernel: [2145601.481780] freeswitch D ffffffff810a19c6 0 1589 1
> 0x00000000
> >
> > kernel: [2145601.486345] ffff88008e301490 0000000000000086
> 0000000000014000 ffff8800ea02b
> >
> > kernel: [2145601.491304] 0000000000014000 ffff88008e301490
> ffff8800efc348b0 ffff8800effda
> >
> > kernel: [2145601.496294] 0000000000000002 ffffffffa00f06f0
> ffff8800ea02bb20 ffff8800e9c4c
> >
> > kernel: [2145601.501373] Call Trace:
> >
> > kernel: [2145601.503039] [<ffffffffa00f06f0>] ?
> start_this_handle+0x5d0/0x5d0 [jbd2]
> >
> > kernel: [2145601.507213] [<ffffffff8153711b>] ? io_schedule+0xab/0x140
> >
> > kernel: [2145601.510700] [<ffffffffa00f06fa>] ?
> sleep_on_shadow_bh+0xa/0x10 [jbd2]
> >
> > kernel: [2145601.514798] [<ffffffff815374ee>] ? __wait_on_bit+0x5e/0x90
> >
> > kernel: [2145601.518320] [<ffffffffa00f06f0>] ?
> start_this_handle+0x5d0/0x5d0 [jbd2]
> >
> > kernel: [2145601.522560] [<ffffffff81537597>] ?
> out_of_line_wait_on_bit+0x77/0x90
> >
> > kernel: [2145601.526611] [<ffffffff810afa70>] ?
> autoremove_wake_function+0x30/0x30
> >
> > kernel: [2145601.530704] [<ffffffff811ea9cc>] ?
> __find_get_block+0xbc/0x260
> >
> > kernel: [2145601.534503] [<ffffffffa00f1b75>] ?
> do_get_write_access+0x275/0x4e0 [jbd2]
> >
> > kernel: [2145601.538490] [<ffffffff811eae56>] ? __getblk_gfp+0x26/0x60
> >
> > kernel: [2145601.541563] [<ffffffffa011552b>] ?
> ext4_dirty_inode+0x3b/0x60 [ext4]
> >
> > kernel: [2145601.545135] [<ffffffffa00f1e02>] ?
> jbd2_journal_get_write_access+0x22/0x40 [
> >
> > kernel: [2145601.549586] [<ffffffffa013d636>] ?
> __ext4_journal_get_write_access+0x36/0x80
> >
> > kernel: [2145601.554118] [<ffffffffa0111f80>] ?
> ext4_reserve_inode_write+0x60/0x80 [ext4]
> >
> > kernel: [2145601.558251] [<ffffffffa0111fdf>] ?
> ext4_mark_inode_dirty+0x3f/0x1f0 [ext4]
> >
> > kernel: [2145601.562161] [<ffffffffa011552b>] ?
> ext4_dirty_inode+0x3b/0x60 [ext4]
> >
> > kernel: [2145601.565619] [<ffffffff811e31fc>] ?
> __mark_inode_dirty+0x16c/0x2c0
> >
> > kernel: [2145601.569045] [<ffffffff811d2fa9>] ? update_time+0x89/0xc0
> >
> > kernel: [2145601.572339] [<ffffffff811d31a3>] ?
> file_update_time+0x83/0xd0
> >
> > kernel: [2145601.575806] [<ffffffff8114a8b8>] ?
> __generic_file_write_iter+0x1b8/0x3c0
> >
> > kernel: [2145601.579850] [<ffffffff81536903>] ? __schedule+0x233/0x740
> >
> > kernel: [2145601.583479] [<ffffffffa0108d20>] ?
> ext4_file_write_iter+0x100/0x3e0 [ext4]
> >
> > kernel: [2145601.587722] [<ffffffff81536903>] ? __schedule+0x233/0x740
> >
> > kernel: [2145601.590891] [<ffffffff8153690f>] ? __schedule+0x23f/0x740
> >
> > kernel: [2145601.593958] [<ffffffff8153690f>] ? __schedule+0x23f/0x740
> >
> > kernel: [2145601.597353] [<ffffffff81536903>] ? __schedule+0x233/0x740
> >
> > kernel: [2145601.599562] [<ffffffff8153690f>] ? __schedule+0x23f/0x740
> >
> > kernel: [2145601.601874] [<ffffffff81536903>] ? __schedule+0x233/0x740
> >
> > kernel: [2145601.605203] [<ffffffff8153690f>] ? __schedule+0x23f/0x740
> >
> > kernel: [2145601.608712] [<ffffffff81536903>] ? __schedule+0x233/0x740
> >
> > kernel: [2145601.612189] [<ffffffff812ca038>] ? timerqueue_add+0x58/0xa0
> >
> > kernel: [2145601.615786] [<ffffffff810915b1>] ? enqueue_hrtimer+0x21/0xa0
> >
> > kernel: [2145601.619516] [<ffffffff811b751a>] ? new_sync_write+0x7a/0xb0
> >
> > kernel: [2145601.623227] [<ffffffff811b7cb5>] ? vfs_write+0xb5/0x1f0
> >
> > kernel: [2145601.626683] [<ffffffff811b7bac>] ? vfs_read+0x11c/0x170
> >
> > kernel: [2145601.630119] [<ffffffff811b8802>] ? SyS_write+0x42/0xa0
> >
> > kernel: [2145601.633491] [<ffffffff8153ae1c>] ?
> system_call_fast_compare_end+0x1c/0x21
> >
> > This is on an AWS ec2 t2 large instance...
> > Regards,
> > David Villasmil
> > email: david.villasmil.work at gmail.com
> > phone: +34669448337
> _________________________________________________________________________
>
> The FreeSWITCH project is sponsored by SignalWire https://signalwire.com
> Enhance your FreeSWITCH install with disruptive priced SMS and PSTN
> services.
> Build your next product on our scalable cloud platform.
>
> Join our online community to chat in real time
> https://signalwire.community
>
> Professional FreeSWITCH Services
> sales at freeswitch.com
> https://freeswitch.com
>
> Official FreeSWITCH Sites
> https://freeswitch.com/oss
> https://freeswitch.org/confluence
> https://cluecon.com
>
> FreeSWITCH-users mailing list
> FreeSWITCH-users at lists.freeswitch.org
> http://lists.freeswitch.org/mailman/listinfo/freeswitch-users
> UNSUBSCRIBE:http://lists.freeswitch.org/mailman/options/freeswitch-users
> https://freeswitch.com

-- 
Regards,

David Villasmil
email: david.villasmil.work at gmail.com
phone: +34669448337
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.freeswitch.org/pipermail/freeswitch-users/attachments/20190828/4b406d8c/attachment-0001.html>

From shaun.stokes at itec-support.co.uk  Fri Aug 30 11:02:59 2019
From: shaun.stokes at itec-support.co.uk (Shaun Stokes)
Date: Fri, 30 Aug 2019 11:02:59 +0000
Subject: [Freeswitch-users] Kernel error
In-Reply-To: <CAFGRPVqcwXbwgBNKw8BqGmrOU3e35cVRXFT_tbLhU0cGH6T5ew@mail.gmail.com>
References: <CAFGRPVrreugvK7sa00OfxtxkMa5H_rfE7Qex7xFZJQHSMPFugw@mail.gmail.com>
 <CAGPQfi-6+Sj4Sxhb+3gYDoME0=tL=+AFtR+sp_DCneT3Guatng@mail.gmail.com>,
 <CAFGRPVqcwXbwgBNKw8BqGmrOU3e35cVRXFT_tbLhU0cGH6T5ew@mail.gmail.com>
Message-ID: <LNXP265MB1180F96E6B183CB2D4CC603CEBBD0@LNXP265MB1180.GBRP265.PROD.OUTLOOK.COM>

I've seen this issue when using CIFS mounts on Debian 9.

Are the FreeSWITCH directories you use for sounds, recordings, storage etc local or are they linked to network storage?
________________________________
From: FreeSWITCH-users <freeswitch-users-bounces at lists.freeswitch.org> on behalf of David Villasmil <david.villasmil.work at gmail.com>
Sent: 28 August 2019 20:48:41
To: FreeSWITCH Users Help <freeswitch-users at lists.freeswitch.org>
Subject: Re: [Freeswitch-users] Kernel error

Sounds like it. Hey was wondering whether anyone had run into that.

On Wed, 28 Aug 2019 at 20:10, Brian : <brians at iptel.co<mailto:brians at iptel.co>> wrote:
Hi David,

Some IO issue on that instance?



On Friday, August 23, 2019, David Villasmil <david.villasmil.work at gmail.com<mailto:david.villasmil.work at gmail.com>> wrote:
> Hello all,
> I got a kernel error today:
>
> kernel: [2145601.469472] INFO: task freeswitch:1589 blocked for more than 120 seconds.
>
> kernel: [2145601.473832] Not tainted 3.16.0-7-amd64 #1
>
> kernel: [2145601.476781] "echo 0 > /proc/sys/kernel/hung_task_timeout_secs" disables this
>
> kernel: [2145601.481780] freeswitch D ffffffff810a19c6 0 1589 1 0x00000000
>
> kernel: [2145601.486345] ffff88008e301490 0000000000000086 0000000000014000 ffff8800ea02b
>
> kernel: [2145601.491304] 0000000000014000 ffff88008e301490 ffff8800efc348b0 ffff8800effda
>
> kernel: [2145601.496294] 0000000000000002 ffffffffa00f06f0 ffff8800ea02bb20 ffff8800e9c4c
>
> kernel: [2145601.501373] Call Trace:
>
> kernel: [2145601.503039] [<ffffffffa00f06f0>] ? start_this_handle+0x5d0/0x5d0 [jbd2]
>
> kernel: [2145601.507213] [<ffffffff8153711b>] ? io_schedule+0xab/0x140
>
> kernel: [2145601.510700] [<ffffffffa00f06fa>] ? sleep_on_shadow_bh+0xa/0x10 [jbd2]
>
> kernel: [2145601.514798] [<ffffffff815374ee>] ? __wait_on_bit+0x5e/0x90
>
> kernel: [2145601.518320] [<ffffffffa00f06f0>] ? start_this_handle+0x5d0/0x5d0 [jbd2]
>
> kernel: [2145601.522560] [<ffffffff81537597>] ? out_of_line_wait_on_bit+0x77/0x90
>
> kernel: [2145601.526611] [<ffffffff810afa70>] ? autoremove_wake_function+0x30/0x30
>
> kernel: [2145601.530704] [<ffffffff811ea9cc>] ? __find_get_block+0xbc/0x260
>
> kernel: [2145601.534503] [<ffffffffa00f1b75>] ? do_get_write_access+0x275/0x4e0 [jbd2]
>
> kernel: [2145601.538490] [<ffffffff811eae56>] ? __getblk_gfp+0x26/0x60
>
> kernel: [2145601.541563] [<ffffffffa011552b>] ? ext4_dirty_inode+0x3b/0x60 [ext4]
>
> kernel: [2145601.545135] [<ffffffffa00f1e02>] ? jbd2_journal_get_write_access+0x22/0x40 [
>
> kernel: [2145601.549586] [<ffffffffa013d636>] ? __ext4_journal_get_write_access+0x36/0x80
>
> kernel: [2145601.554118] [<ffffffffa0111f80>] ? ext4_reserve_inode_write+0x60/0x80 [ext4]
>
> kernel: [2145601.558251] [<ffffffffa0111fdf>] ? ext4_mark_inode_dirty+0x3f/0x1f0 [ext4]
>
> kernel: [2145601.562161] [<ffffffffa011552b>] ? ext4_dirty_inode+0x3b/0x60 [ext4]
>
> kernel: [2145601.565619] [<ffffffff811e31fc>] ? __mark_inode_dirty+0x16c/0x2c0
>
> kernel: [2145601.569045] [<ffffffff811d2fa9>] ? update_time+0x89/0xc0
>
> kernel: [2145601.572339] [<ffffffff811d31a3>] ? file_update_time+0x83/0xd0
>
> kernel: [2145601.575806] [<ffffffff8114a8b8>] ? __generic_file_write_iter+0x1b8/0x3c0
>
> kernel: [2145601.579850] [<ffffffff81536903>] ? __schedule+0x233/0x740
>
> kernel: [2145601.583479] [<ffffffffa0108d20>] ? ext4_file_write_iter+0x100/0x3e0 [ext4]
>
> kernel: [2145601.587722] [<ffffffff81536903>] ? __schedule+0x233/0x740
>
> kernel: [2145601.590891] [<ffffffff8153690f>] ? __schedule+0x23f/0x740
>
> kernel: [2145601.593958] [<ffffffff8153690f>] ? __schedule+0x23f/0x740
>
> kernel: [2145601.597353] [<ffffffff81536903>] ? __schedule+0x233/0x740
>
> kernel: [2145601.599562] [<ffffffff8153690f>] ? __schedule+0x23f/0x740
>
> kernel: [2145601.601874] [<ffffffff81536903>] ? __schedule+0x233/0x740
>
> kernel: [2145601.605203] [<ffffffff8153690f>] ? __schedule+0x23f/0x740
>
> kernel: [2145601.608712] [<ffffffff81536903>] ? __schedule+0x233/0x740
>
> kernel: [2145601.612189] [<ffffffff812ca038>] ? timerqueue_add+0x58/0xa0
>
> kernel: [2145601.615786] [<ffffffff810915b1>] ? enqueue_hrtimer+0x21/0xa0
>
> kernel: [2145601.619516] [<ffffffff811b751a>] ? new_sync_write+0x7a/0xb0
>
> kernel: [2145601.623227] [<ffffffff811b7cb5>] ? vfs_write+0xb5/0x1f0
>
> kernel: [2145601.626683] [<ffffffff811b7bac>] ? vfs_read+0x11c/0x170
>
> kernel: [2145601.630119] [<ffffffff811b8802>] ? SyS_write+0x42/0xa0
>
> kernel: [2145601.633491] [<ffffffff8153ae1c>] ? system_call_fast_compare_end+0x1c/0x21
>
> This is on an AWS ec2 t2 large instance...
> Regards,
> David Villasmil
> email: david.villasmil.work at gmail.com<mailto:david.villasmil.work at gmail.com>
> phone: +34669448337 _________________________________________________________________________

The FreeSWITCH project is sponsored by SignalWire https://signalwire.com
Enhance your FreeSWITCH install with disruptive priced SMS and PSTN services.
Build your next product on our scalable cloud platform.

Join our online community to chat in real time https://signalwire.community

Professional FreeSWITCH Services
sales at freeswitch.com<mailto:sales at freeswitch.com>
https://freeswitch.com

Official FreeSWITCH Sites
https://freeswitch.com/oss
https://freeswitch.org/confluence
https://cluecon.com

FreeSWITCH-users mailing list
FreeSWITCH-users at lists.freeswitch.org<mailto:FreeSWITCH-users at lists.freeswitch.org>
http://lists.freeswitch.org/mailman/listinfo/freeswitch-users
UNSUBSCRIBE:http://lists.freeswitch.org/mailman/options/freeswitch-users
https://freeswitch.com
--
Regards,

David Villasmil
email: david.villasmil.work at gmail.com<mailto:david.villasmil.work at gmail.com>
phone: +34669448337
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.freeswitch.org/pipermail/freeswitch-users/attachments/20190830/79d3418c/attachment.html>

From s.safarov at gmail.com  Fri Aug 30 11:40:11 2019
From: s.safarov at gmail.com (Sergey Safarov)
Date: Fri, 30 Aug 2019 14:40:11 +0300
Subject: [Freeswitch-users] Kernel error
In-Reply-To: <LNXP265MB1180F96E6B183CB2D4CC603CEBBD0@LNXP265MB1180.GBRP265.PROD.OUTLOOK.COM>
References: <CAFGRPVrreugvK7sa00OfxtxkMa5H_rfE7Qex7xFZJQHSMPFugw@mail.gmail.com>
 <CAGPQfi-6+Sj4Sxhb+3gYDoME0=tL=+AFtR+sp_DCneT3Guatng@mail.gmail.com>
 <CAFGRPVqcwXbwgBNKw8BqGmrOU3e35cVRXFT_tbLhU0cGH6T5ew@mail.gmail.com>
 <LNXP265MB1180F96E6B183CB2D4CC603CEBBD0@LNXP265MB1180.GBRP265.PROD.OUTLOOK.COM>
Message-ID: <CAHtxdDepEqHy2Zt97v6jGN6eRMi1LeRjhJfWcBnsuY=fx65b1g@mail.gmail.com>

I looked same error on AWS EBS root disk.

On Fri, Aug 30, 2019 at 2:19 PM Shaun Stokes <
shaun.stokes at itec-support.co.uk> wrote:

> I've seen this issue when using CIFS mounts on Debian 9.
>
> Are the FreeSWITCH directories you use for sounds, recordings, storage
> etc local or are they linked to network storage?
> ------------------------------
> *From:* FreeSWITCH-users <freeswitch-users-bounces at lists.freeswitch.org>
> on behalf of David Villasmil <david.villasmil.work at gmail.com>
> *Sent:* 28 August 2019 20:48:41
> *To:* FreeSWITCH Users Help <freeswitch-users at lists.freeswitch.org>
> *Subject:* Re: [Freeswitch-users] Kernel error
>
> Sounds like it. Hey was wondering whether anyone had run into that.
>
> On Wed, 28 Aug 2019 at 20:10, Brian : <brians at iptel.co> wrote:
>
> Hi David,
>
> Some IO issue on that instance?
>
>
>
> On Friday, August 23, 2019, David Villasmil <
> david.villasmil.work at gmail.com> wrote:
> > Hello all,
> > I got a kernel error today:
> >
> > kernel: [2145601.469472] INFO: task freeswitch:1589 blocked for more
> than 120 seconds.
> >
> > kernel: [2145601.473832] Not tainted 3.16.0-7-amd64 #1
> >
> > kernel: [2145601.476781] "echo 0 >
> /proc/sys/kernel/hung_task_timeout_secs" disables this
> >
> > kernel: [2145601.481780] freeswitch D ffffffff810a19c6 0 1589 1
> 0x00000000
> >
> > kernel: [2145601.486345] ffff88008e301490 0000000000000086
> 0000000000014000 ffff8800ea02b
> >
> > kernel: [2145601.491304] 0000000000014000 ffff88008e301490
> ffff8800efc348b0 ffff8800effda
> >
> > kernel: [2145601.496294] 0000000000000002 ffffffffa00f06f0
> ffff8800ea02bb20 ffff8800e9c4c
> >
> > kernel: [2145601.501373] Call Trace:
> >
> > kernel: [2145601.503039] [<ffffffffa00f06f0>] ?
> start_this_handle+0x5d0/0x5d0 [jbd2]
> >
> > kernel: [2145601.507213] [<ffffffff8153711b>] ? io_schedule+0xab/0x140
> >
> > kernel: [2145601.510700] [<ffffffffa00f06fa>] ?
> sleep_on_shadow_bh+0xa/0x10 [jbd2]
> >
> > kernel: [2145601.514798] [<ffffffff815374ee>] ? __wait_on_bit+0x5e/0x90
> >
> > kernel: [2145601.518320] [<ffffffffa00f06f0>] ?
> start_this_handle+0x5d0/0x5d0 [jbd2]
> >
> > kernel: [2145601.522560] [<ffffffff81537597>] ?
> out_of_line_wait_on_bit+0x77/0x90
> >
> > kernel: [2145601.526611] [<ffffffff810afa70>] ?
> autoremove_wake_function+0x30/0x30
> >
> > kernel: [2145601.530704] [<ffffffff811ea9cc>] ?
> __find_get_block+0xbc/0x260
> >
> > kernel: [2145601.534503] [<ffffffffa00f1b75>] ?
> do_get_write_access+0x275/0x4e0 [jbd2]
> >
> > kernel: [2145601.538490] [<ffffffff811eae56>] ? __getblk_gfp+0x26/0x60
> >
> > kernel: [2145601.541563] [<ffffffffa011552b>] ?
> ext4_dirty_inode+0x3b/0x60 [ext4]
> >
> > kernel: [2145601.545135] [<ffffffffa00f1e02>] ?
> jbd2_journal_get_write_access+0x22/0x40 [
> >
> > kernel: [2145601.549586] [<ffffffffa013d636>] ?
> __ext4_journal_get_write_access+0x36/0x80
> >
> > kernel: [2145601.554118] [<ffffffffa0111f80>] ?
> ext4_reserve_inode_write+0x60/0x80 [ext4]
> >
> > kernel: [2145601.558251] [<ffffffffa0111fdf>] ?
> ext4_mark_inode_dirty+0x3f/0x1f0 [ext4]
> >
> > kernel: [2145601.562161] [<ffffffffa011552b>] ?
> ext4_dirty_inode+0x3b/0x60 [ext4]
> >
> > kernel: [2145601.565619] [<ffffffff811e31fc>] ?
> __mark_inode_dirty+0x16c/0x2c0
> >
> > kernel: [2145601.569045] [<ffffffff811d2fa9>] ? update_time+0x89/0xc0
> >
> > kernel: [2145601.572339] [<ffffffff811d31a3>] ?
> file_update_time+0x83/0xd0
> >
> > kernel: [2145601.575806] [<ffffffff8114a8b8>] ?
> __generic_file_write_iter+0x1b8/0x3c0
> >
> > kernel: [2145601.579850] [<ffffffff81536903>] ? __schedule+0x233/0x740
> >
> > kernel: [2145601.583479] [<ffffffffa0108d20>] ?
> ext4_file_write_iter+0x100/0x3e0 [ext4]
> >
> > kernel: [2145601.587722] [<ffffffff81536903>] ? __schedule+0x233/0x740
> >
> > kernel: [2145601.590891] [<ffffffff8153690f>] ? __schedule+0x23f/0x740
> >
> > kernel: [2145601.593958] [<ffffffff8153690f>] ? __schedule+0x23f/0x740
> >
> > kernel: [2145601.597353] [<ffffffff81536903>] ? __schedule+0x233/0x740
> >
> > kernel: [2145601.599562] [<ffffffff8153690f>] ? __schedule+0x23f/0x740
> >
> > kernel: [2145601.601874] [<ffffffff81536903>] ? __schedule+0x233/0x740
> >
> > kernel: [2145601.605203] [<ffffffff8153690f>] ? __schedule+0x23f/0x740
> >
> > kernel: [2145601.608712] [<ffffffff81536903>] ? __schedule+0x233/0x740
> >
> > kernel: [2145601.612189] [<ffffffff812ca038>] ? timerqueue_add+0x58/0xa0
> >
> > kernel: [2145601.615786] [<ffffffff810915b1>] ? enqueue_hrtimer+0x21/0xa0
> >
> > kernel: [2145601.619516] [<ffffffff811b751a>] ? new_sync_write+0x7a/0xb0
> >
> > kernel: [2145601.623227] [<ffffffff811b7cb5>] ? vfs_write+0xb5/0x1f0
> >
> > kernel: [2145601.626683] [<ffffffff811b7bac>] ? vfs_read+0x11c/0x170
> >
> > kernel: [2145601.630119] [<ffffffff811b8802>] ? SyS_write+0x42/0xa0
> >
> > kernel: [2145601.633491] [<ffffffff8153ae1c>] ?
> system_call_fast_compare_end+0x1c/0x21
> >
> > This is on an AWS ec2 t2 large instance...
> > Regards,
> > David Villasmil
> > email: david.villasmil.work at gmail.com
> > phone: +34669448337
> _________________________________________________________________________
>
> The FreeSWITCH project is sponsored by SignalWire https://signalwire.com
> Enhance your FreeSWITCH install with disruptive priced SMS and PSTN
> services.
> Build your next product on our scalable cloud platform.
>
> Join our online community to chat in real time
> https://signalwire.community
>
> Professional FreeSWITCH Services
> sales at freeswitch.com
> https://freeswitch.com
>
> Official FreeSWITCH Sites
> https://freeswitch.com/oss
> https://freeswitch.org/confluence
> https://cluecon.com
>
> FreeSWITCH-users mailing list
> FreeSWITCH-users at lists.freeswitch.org
> http://lists.freeswitch.org/mailman/listinfo/freeswitch-users
> UNSUBSCRIBE:http://lists.freeswitch.org/mailman/options/freeswitch-users
> https://freeswitch.com
>
> --
> Regards,
>
> David Villasmil
> email: david.villasmil.work at gmail.com
> phone: +34669448337
> _________________________________________________________________________
>
> The FreeSWITCH project is sponsored by SignalWire https://signalwire.com
> Enhance your FreeSWITCH install with disruptive priced SMS and PSTN
> services.
> Build your next product on our scalable cloud platform.
>
> Join our online community to chat in real time
> https://signalwire.community
>
> Professional FreeSWITCH Services
> sales at freeswitch.com
> https://freeswitch.com
>
> Official FreeSWITCH Sites
> https://freeswitch.com/oss
> https://freeswitch.org/confluence
> https://cluecon.com
>
> FreeSWITCH-users mailing list
> FreeSWITCH-users at lists.freeswitch.org
> http://lists.freeswitch.org/mailman/listinfo/freeswitch-users
> UNSUBSCRIBE:http://lists.freeswitch.org/mailman/options/freeswitch-users
> https://freeswitch.com
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.freeswitch.org/pipermail/freeswitch-users/attachments/20190830/32087b23/attachment-0001.html>

From david.villasmil.work at gmail.com  Fri Aug 30 13:07:06 2019
From: david.villasmil.work at gmail.com (David Villasmil)
Date: Fri, 30 Aug 2019 15:07:06 +0200
Subject: [Freeswitch-users] Kernel error
In-Reply-To: <CAHtxdDepEqHy2Zt97v6jGN6eRMi1LeRjhJfWcBnsuY=fx65b1g@mail.gmail.com>
References: <CAFGRPVrreugvK7sa00OfxtxkMa5H_rfE7Qex7xFZJQHSMPFugw@mail.gmail.com>
 <CAGPQfi-6+Sj4Sxhb+3gYDoME0=tL=+AFtR+sp_DCneT3Guatng@mail.gmail.com>
 <CAFGRPVqcwXbwgBNKw8BqGmrOU3e35cVRXFT_tbLhU0cGH6T5ew@mail.gmail.com>
 <LNXP265MB1180F96E6B183CB2D4CC603CEBBD0@LNXP265MB1180.GBRP265.PROD.OUTLOOK.COM>
 <CAHtxdDepEqHy2Zt97v6jGN6eRMi1LeRjhJfWcBnsuY=fx65b1g@mail.gmail.com>
Message-ID: <CAFGRPVpRxUB81pqEgipW1LQOnMCzpPtSg+NJQYrznuJfsA8xtg@mail.gmail.com>

Ditto.

Btw: I have one instance on postgresql in the core, and I STILL got  sql
error from that file.

On Fri, 30 Aug 2019 at 14:27, Sergey Safarov <s.safarov at gmail.com> wrote:

> I looked same error on AWS EBS root disk.
>
> On Fri, Aug 30, 2019 at 2:19 PM Shaun Stokes <
> shaun.stokes at itec-support.co.uk> wrote:
>
>> I've seen this issue when using CIFS mounts on Debian 9.
>>
>> Are the FreeSWITCH directories you use for sounds, recordings, storage
>> etc local or are they linked to network storage?
>> ------------------------------
>> *From:* FreeSWITCH-users <freeswitch-users-bounces at lists.freeswitch.org>
>> on behalf of David Villasmil <david.villasmil.work at gmail.com>
>> *Sent:* 28 August 2019 20:48:41
>> *To:* FreeSWITCH Users Help <freeswitch-users at lists.freeswitch.org>
>> *Subject:* Re: [Freeswitch-users] Kernel error
>>
>> Sounds like it. Hey was wondering whether anyone had run into that.
>>
>> On Wed, 28 Aug 2019 at 20:10, Brian : <brians at iptel.co> wrote:
>>
>> Hi David,
>>
>> Some IO issue on that instance?
>>
>>
>>
>> On Friday, August 23, 2019, David Villasmil <
>> david.villasmil.work at gmail.com> wrote:
>> > Hello all,
>> > I got a kernel error today:
>> >
>> > kernel: [2145601.469472] INFO: task freeswitch:1589 blocked for more
>> than 120 seconds.
>> >
>> > kernel: [2145601.473832] Not tainted 3.16.0-7-amd64 #1
>> >
>> > kernel: [2145601.476781] "echo 0 >
>> /proc/sys/kernel/hung_task_timeout_secs" disables this
>> >
>> > kernel: [2145601.481780] freeswitch D ffffffff810a19c6 0 1589 1
>> 0x00000000
>> >
>> > kernel: [2145601.486345] ffff88008e301490 0000000000000086
>> 0000000000014000 ffff8800ea02b
>> >
>> > kernel: [2145601.491304] 0000000000014000 ffff88008e301490
>> ffff8800efc348b0 ffff8800effda
>> >
>> > kernel: [2145601.496294] 0000000000000002 ffffffffa00f06f0
>> ffff8800ea02bb20 ffff8800e9c4c
>> >
>> > kernel: [2145601.501373] Call Trace:
>> >
>> > kernel: [2145601.503039] [<ffffffffa00f06f0>] ?
>> start_this_handle+0x5d0/0x5d0 [jbd2]
>> >
>> > kernel: [2145601.507213] [<ffffffff8153711b>] ? io_schedule+0xab/0x140
>> >
>> > kernel: [2145601.510700] [<ffffffffa00f06fa>] ?
>> sleep_on_shadow_bh+0xa/0x10 [jbd2]
>> >
>> > kernel: [2145601.514798] [<ffffffff815374ee>] ? __wait_on_bit+0x5e/0x90
>> >
>> > kernel: [2145601.518320] [<ffffffffa00f06f0>] ?
>> start_this_handle+0x5d0/0x5d0 [jbd2]
>> >
>> > kernel: [2145601.522560] [<ffffffff81537597>] ?
>> out_of_line_wait_on_bit+0x77/0x90
>> >
>> > kernel: [2145601.526611] [<ffffffff810afa70>] ?
>> autoremove_wake_function+0x30/0x30
>> >
>> > kernel: [2145601.530704] [<ffffffff811ea9cc>] ?
>> __find_get_block+0xbc/0x260
>> >
>> > kernel: [2145601.534503] [<ffffffffa00f1b75>] ?
>> do_get_write_access+0x275/0x4e0 [jbd2]
>> >
>> > kernel: [2145601.538490] [<ffffffff811eae56>] ? __getblk_gfp+0x26/0x60
>> >
>> > kernel: [2145601.541563] [<ffffffffa011552b>] ?
>> ext4_dirty_inode+0x3b/0x60 [ext4]
>> >
>> > kernel: [2145601.545135] [<ffffffffa00f1e02>] ?
>> jbd2_journal_get_write_access+0x22/0x40 [
>> >
>> > kernel: [2145601.549586] [<ffffffffa013d636>] ?
>> __ext4_journal_get_write_access+0x36/0x80
>> >
>> > kernel: [2145601.554118] [<ffffffffa0111f80>] ?
>> ext4_reserve_inode_write+0x60/0x80 [ext4]
>> >
>> > kernel: [2145601.558251] [<ffffffffa0111fdf>] ?
>> ext4_mark_inode_dirty+0x3f/0x1f0 [ext4]
>> >
>> > kernel: [2145601.562161] [<ffffffffa011552b>] ?
>> ext4_dirty_inode+0x3b/0x60 [ext4]
>> >
>> > kernel: [2145601.565619] [<ffffffff811e31fc>] ?
>> __mark_inode_dirty+0x16c/0x2c0
>> >
>> > kernel: [2145601.569045] [<ffffffff811d2fa9>] ? update_time+0x89/0xc0
>> >
>> > kernel: [2145601.572339] [<ffffffff811d31a3>] ?
>> file_update_time+0x83/0xd0
>> >
>> > kernel: [2145601.575806] [<ffffffff8114a8b8>] ?
>> __generic_file_write_iter+0x1b8/0x3c0
>> >
>> > kernel: [2145601.579850] [<ffffffff81536903>] ? __schedule+0x233/0x740
>> >
>> > kernel: [2145601.583479] [<ffffffffa0108d20>] ?
>> ext4_file_write_iter+0x100/0x3e0 [ext4]
>> >
>> > kernel: [2145601.587722] [<ffffffff81536903>] ? __schedule+0x233/0x740
>> >
>> > kernel: [2145601.590891] [<ffffffff8153690f>] ? __schedule+0x23f/0x740
>> >
>> > kernel: [2145601.593958] [<ffffffff8153690f>] ? __schedule+0x23f/0x740
>> >
>> > kernel: [2145601.597353] [<ffffffff81536903>] ? __schedule+0x233/0x740
>> >
>> > kernel: [2145601.599562] [<ffffffff8153690f>] ? __schedule+0x23f/0x740
>> >
>> > kernel: [2145601.601874] [<ffffffff81536903>] ? __schedule+0x233/0x740
>> >
>> > kernel: [2145601.605203] [<ffffffff8153690f>] ? __schedule+0x23f/0x740
>> >
>> > kernel: [2145601.608712] [<ffffffff81536903>] ? __schedule+0x233/0x740
>> >
>> > kernel: [2145601.612189] [<ffffffff812ca038>] ? timerqueue_add+0x58/0xa0
>> >
>> > kernel: [2145601.615786] [<ffffffff810915b1>] ?
>> enqueue_hrtimer+0x21/0xa0
>> >
>> > kernel: [2145601.619516] [<ffffffff811b751a>] ? new_sync_write+0x7a/0xb0
>> >
>> > kernel: [2145601.623227] [<ffffffff811b7cb5>] ? vfs_write+0xb5/0x1f0
>> >
>> > kernel: [2145601.626683] [<ffffffff811b7bac>] ? vfs_read+0x11c/0x170
>> >
>> > kernel: [2145601.630119] [<ffffffff811b8802>] ? SyS_write+0x42/0xa0
>> >
>> > kernel: [2145601.633491] [<ffffffff8153ae1c>] ?
>> system_call_fast_compare_end+0x1c/0x21
>> >
>> > This is on an AWS ec2 t2 large instance...
>> > Regards,
>> > David Villasmil
>> > email: david.villasmil.work at gmail.com
>> > phone: +34669448337
>> _________________________________________________________________________
>>
>> The FreeSWITCH project is sponsored by SignalWire https://signalwire.com
>> Enhance your FreeSWITCH install with disruptive priced SMS and PSTN
>> services.
>> Build your next product on our scalable cloud platform.
>>
>> Join our online community to chat in real time
>> https://signalwire.community
>>
>> Professional FreeSWITCH Services
>> sales at freeswitch.com
>> https://freeswitch.com
>>
>> Official FreeSWITCH Sites
>> https://freeswitch.com/oss
>> https://freeswitch.org/confluence
>> https://cluecon.com
>>
>> FreeSWITCH-users mailing list
>> FreeSWITCH-users at lists.freeswitch.org
>> http://lists.freeswitch.org/mailman/listinfo/freeswitch-users
>> UNSUBSCRIBE:http://lists.freeswitch.org/mailman/options/freeswitch-users
>> https://freeswitch.com
>>
>> --
>> Regards,
>>
>> David Villasmil
>> email: david.villasmil.work at gmail.com
>> phone: +34669448337
>> _________________________________________________________________________
>>
>> The FreeSWITCH project is sponsored by SignalWire https://signalwire.com
>> Enhance your FreeSWITCH install with disruptive priced SMS and PSTN
>> services.
>> Build your next product on our scalable cloud platform.
>>
>> Join our online community to chat in real time
>> https://signalwire.community
>>
>> Professional FreeSWITCH Services
>> sales at freeswitch.com
>> https://freeswitch.com
>>
>> Official FreeSWITCH Sites
>> https://freeswitch.com/oss
>> https://freeswitch.org/confluence
>> https://cluecon.com
>>
>> FreeSWITCH-users mailing list
>> FreeSWITCH-users at lists.freeswitch.org
>> http://lists.freeswitch.org/mailman/listinfo/freeswitch-users
>> UNSUBSCRIBE:http://lists.freeswitch.org/mailman/options/freeswitch-users
>> https://freeswitch.com
>
> _________________________________________________________________________
>
> The FreeSWITCH project is sponsored by SignalWire https://signalwire.com
> Enhance your FreeSWITCH install with disruptive priced SMS and PSTN
> services.
> Build your next product on our scalable cloud platform.
>
> Join our online community to chat in real time
> https://signalwire.community
>
> Professional FreeSWITCH Services
> sales at freeswitch.com
> https://freeswitch.com
>
> Official FreeSWITCH Sites
> https://freeswitch.com/oss
> https://freeswitch.org/confluence
> https://cluecon.com
>
> FreeSWITCH-users mailing list
> FreeSWITCH-users at lists.freeswitch.org
> http://lists.freeswitch.org/mailman/listinfo/freeswitch-users
> UNSUBSCRIBE:http://lists.freeswitch.org/mailman/options/freeswitch-users
> https://freeswitch.com

-- 
Regards,

David Villasmil
email: david.villasmil.work at gmail.com
phone: +34669448337
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.freeswitch.org/pipermail/freeswitch-users/attachments/20190830/2010d4e2/attachment.html>

From tanim at surroundapps.com  Tue Aug 27 05:48:16 2019
From: tanim at surroundapps.com (Md,Mehedi Hasan Kabir(Tanim))
Date: Tue, 27 Aug 2019 11:48:16 +0600
Subject: [Freeswitch-users] Inbound Call Issue
Message-ID: <CAF2MuSOwGFi1ZKmNkfF9CdDxqx+5NVVMfRSV612+LP=P64zP_w@mail.gmail.com>

Hi


I am new to FreeSWITCH. I am trying to establish outbound and inbound call
using Flowroute. Outbound call is working fine. But the inbound call is not
working. If I dialed DID number from the phone, it says “Invalid Number”.
No log in FreeSWITCH CLI. Did I miss anything or any more configuration
needed?


Please find my Gateway Configuration and Dialplan for Inbound call below.


Gateway Configuration


Path:/usr/local/freeswitch/conf/sip_profiles/external/flowroute.xml


<include>

  <gateway name="flowroute">

  <param name="username" value=“my_username”/>

  <param name="password" value=“my_password”/>

  <param name="proxy" value="sip.flowroute.com"/>

  <param name="expire-seconds" value="60"/>

  <param name="register" value="true"/>

  <param name="register-transport" value="udp"/>

  <param name="retry-seconds" value="30"/>

  <param name="caller-id-in-from" value="false"/>

  <param name="extension-in-contact" value="true"/>

  <!-- <param name="ping" value="25"/> -->

  </gateway>

</include>


Dialplan for Inbound call


Path:/usr/local/freeswitch/conf/dialplan/public/00_inbound_did.xml


<include>

  <extension name="public_did">

    <condition field="destination_number" expression="^(12408446009)$">

      <!--

    If you're hosting multiple domains you will want to set the

    target_domain on these calls so they hit the proper domain after you

    transfer the caller into the default context.


    $${domain} is the default domain set from vars.xml but you can set it

    to any domain you have setup in your user directory.


      -->

      <action application="set" data="domain_name=$${domain}"/>

      <!-- This example maps the DID 5551212 to ring 1000 in the default
context -->

      <action application="transfer" data="2004 XML default"/>



    </condition>

  </extension>

</include>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.freeswitch.org/pipermail/freeswitch-users/attachments/20190827/16e2e9a0/attachment.html>

From geeta.totiger at motorolasolutions.com  Mon Aug 26 13:53:17 2019
From: geeta.totiger at motorolasolutions.com (Geeta Totiger)
Date: Mon, 26 Aug 2019 15:53:17 +0200
Subject: [Freeswitch-users] Freeswitch RFC 4579 - REFER: Requesting a Focus
 to Add a New Resource to a Conference
Message-ID: <CAJ6BXnr50kZgweEoSEXyFEeO9De9uO6Vr7kcmi=zKw7r=bDXug@mail.gmail.com>

Hello Freeswitch Team,

I am new to freeswitch and trying to figure out if Freeswitch support RFC
4579 adding new member to conference by REFER.

*Question:*
Will Freeswitch support adding a member to conference by means of REFER
message as mentioned in RFC 4579 section 5.5 (
https://tools.ietf.org/html/rfc4579  ) ?

*What all I tried so far:*
 I tried the exercise  given in confluence dial-plan way to add a member to
conference but it works through DTMF trigger. I am looking for something
SIP based resource add to conference.
I see that Freeswitch documentation says It supports RFC 4579, But will it
support adding member to conference by REFER messages(5.5 section in RFC
4579) ?
I saw many Tickets around this area but nothing clearly answers my
question. Few example links:
https://freeswitch.org/jira/browse/FS-7259
https://freeswitch.org/jira/si/jira.issueviews:issue-html/FS-5611/FS-5611.html

https://lists.freeswitch.org/pipermail/freeswitch-users/2016-August/121795.html



*Scenario I tried :*
When I try to REFER a member to conference, Freeswitch trigger the outbound
call but it treats it as blind transfer and kicks out the party which sends
refer message.
I want freeswitch just to include the referred member but not kick out the
party which sent refer. and be in conference call.
====================================================================================================
There are 2 members in conference. one member is dialed through gw. that
member is trying to add another client which is sip:service at 172.29.0.3.
Freeswitch triggers the Invite to Refer-To member but it sends BYE to
Referred-By member. Treating it as a blind transfer.

====================================================================================================
  REFER sip:gw+sbc at 172.29.0.2:5060 SIP/2.0
  Via: SIP/2.0/TCP 172.29.0.3:5060;branch=z9hG4bK-34-1-5
  Max-Forwards: 70
  To: <sip:gw+sbc at 172.29.0.2:5060>;tag=mB6pSrNNZ4Sta
  From:  sut <sip:service at 172.29.0.3:5060>;tag=34SIPpTag011
  Call-ID: 0ce57982-42a7-1238-c39e-0242ac1d0002
  CSeq: 8859010 REFER
  Allow: INVITE, ACK, CANCEL, OPTIONS, BYE, REFER, NOTIFY
  Supported: replaces
  Refer-To: <sip:service at 172.29.0.3:5080;transport=TCP>
  Referred-By: <sip:172.29.0.3:5060>
  Contact: <sip:172.29.0.3:5060;transport=TCP>
  Content-Length: 0

Is it possible in freeswitch ?

Thanks,
Geeta

-- 


Your privacy is important to us. That is why we have taken appropriate 
measures to ensure the data you provide to us is kept secure. To learn more 
about how we process your personal information, how we comply with 
applicable data protection laws, and care for the security and privacy of 
your personal data, please review our Privacy Policy 
<https://www.motorolasolutions.com/en_us/about/privacy-policy.html#privacystatement>. 
If you have any questions related to data protection and compliance with 
applicable laws, please contact us at our Security Operations Center at 
1-302-444-9838 or mail us at: 

Attention: Privacy Compliance Program, P.O. 
Box 59263, Schaumburg, IL USA, 60159-0263
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.freeswitch.org/pipermail/freeswitch-users/attachments/20190826/fdf8ca8c/attachment-0001.html>

From arik.halperin at s3code.com  Mon Aug 26 16:07:21 2019
From: arik.halperin at s3code.com (Arik Halperin)
Date: Mon, 26 Aug 2019 19:07:21 +0300
Subject: [Freeswitch-users] Stop recording during hold and resume on unhold
Message-ID: <1CD23C46-D660-4E2B-BE2B-6BAE50AB3038@s3code.com>

Hello,

I have 2 legs of a call, when one of them goes on hold the other leg hears hold music but session recording continues on all channels.
This means that the recording produced, contains the hold music+any audio the user is uttering during this period.
I would like to stop the recording during the period of the hold.

How can I do it using Lua? 

Currently I’m catching the hold and untold events using hook events:


<hook event="CHANNEL_HOLD" script = "channel_hold.lua"/>
 <hook event="CHANNEL_UNHOLD" script = "channel_unhold.lua”/>

Tried the following code and similar, but it does not work:

local recording_dir='/usr/local/freeswitch/recordings/'
local uuid = event:getHeader("Unique-ID")
session = freeswitch.Session(uuid)
freeswitch.consoleLog("crit", uuid .. " on hold:"..session:getState())
local x_session_id = session:getVariable("sip_h_X-SESSION-ID");
record_path  = recording_dir .. x_session_id .. '.mp3'

freeswitch.consoleLog("crit","Stopping session on:"..record_path)
api = freeswitch.API();
session:execute("set", "uuid_record "..session:get_uuid().." stop "..record_path)

Also tried, record_session_stop and did not work either.

Thanks,
Arik Halperin