[Freeswitch-users] Noob question about xml dialplan

David Villasmil david.villasmil.work at gmail.com
Tue May 16 18:48:13 UTC 2017


"xml_locate dialplan"

will give you the whole xml for the dialplan

"xml_locate configuration configuration name sofia.conf"

will give you your sofia.conf
ᐧ

Regards,

David Villasmil
email: david.villasmil.work at gmail.com
phone: +34669448337

On Tue, May 16, 2017 at 8:15 PM, David Villasmil <
david.villasmil.work at gmail.com> wrote:

> Yeah that command doesn't exists. But there is another command, xml_locate
> or something like that.
> Remove the context param and try again. Post the latest version of the
> extension with the section i pointed out before.
>
> I can't send you the fsxml as I'm not in my computer right now. I'll send
> it in a few minutes.
>
> On Tue, May 16, 2017 at 8:12 PM Raúl Alexis Betancor Santana <
> rbetancor at gmail.com> wrote:
>
>> Thats what I'm trying ... to undestand how it works.
>>
>> I posted the profile I'm using a couple of messasges earlier, anyway:
>>
>> <profiles>
>>        <profile name="fax">
>>          <gateways>
>>          <X-PRE-PROCESS cmd="include" data="../gateways/*.xml"/>
>>          </gateways>
>>
>>          <domains>
>>            <domain name="all" alias="false" parse="false"/>
>>          </domains>
>>
>>          <settings>
>>            <param name="debug" value="0"/>
>>            <param name="shutdown-on-fail" value="true"/>
>>            <param name="sip-trace" value="no"/>
>>            <param name="sip-capture" value="yes"/>
>>            <param name="capture-server" value="udp:$${homer_ip}:$${
>> homer_port};hep=3;capture_id=2001"/>
>>            <param name="rfc2833-pt" value="101"/>
>>            <!--<param name="enable-rfc-5626" value="true"/> -->
>>
>>            <param name="t38-trace" value="true"/>
>>            <param name="dialplan" value="XML"/>
>>
>>            <param name="context" value="incoming"/>
>>
>>            <param name="dtmf-duration" value="2000"/>
>>            <param name="codec-prefs" value="PCMU"/>
>>            <param name="disable-hold" value="true"/>
>>
>>            <param name="rtp-timer-name" value="soft"/>
>>            <param name="local-network-acl" value="localnet.auto"/>
>>            <param name="manage-presence" value="false"/>
>>
>>            <param name="inbound-codec-negotiation" value="generous"/>
>>            <param name="nonce-ttl" value="60"/>
>>            <param name="auth-calls" value="false"/>
>>            <param name="disable-register" value="true"/>
>>
>>            <param name="inbound-late-negotiation" value="false"/>
>>            <param name="inbound-zrtp-passthru" value="false"/>
>>
>>            <param name="sip-port" value="5060"/>
>>            <param name="rtp-ip" value="$${sofia_ip}"/>
>>            <param name="sip-ip" value="$${sofia_ip}"/>
>>            <param name="ext-rtp-ip" value="$${sofia_ip}"/>
>>            <param name="ext-sip-ip" value="$${sofia_ip}"/>
>>
>>            <param name="rtp-timeout-sec" value="300"/>
>>            <param name="rtp-hold-timeout-sec" value="1800"/>
>>
>>            <param name="tls" value="false"/>
>>            <param name="tls-only" value="false"/>
>>            <param name="tls-bind-params" value="transport=tls"/>
>>            <param name="tls-sip-port" value="5061"/>
>>            <!-- Location of the agent.pem and cafile.pem ssl certificates
>> (needed for TLS server) -->
>>            <param name="tls-cert-dir" value="$${base_dir}/conf/ssl"/>
>>            <param name="tls-passphrase" value=""/>
>>            <param name="tls-verify-date" value="true"/>
>>            <!-- set to 'in' to only verify incoming connections, 'out' to
>> only verify outgoing connections, 'all' to verify all connections, also
>> 'in_subjects', 'out_subjects' and 'all_subjects' for subject validation.
>> Multiple policies can be split with a '|' pipe -->
>>            <param name="tls-verify-policy" value="none"/>
>>            <param name="tls-verify-depth" value="2"/>
>>            <!-- If the tls-verify-policy is set to subjects_all or
>> subjects_in this sets which subjects are allowed, multiple subjects can be
>> split with a '|' pipe -->
>>            <param name="tls-verify-in-subjects" value=""/>
>>            <!-- TLS version ("sslv23" (default), "tlsv1"). NOTE: Phones
>> may not work with TLSv1 -->
>>            <param name="tls-version" value="tlsv1"/>
>>          </settings>
>>        </profile>
>>  </profiles>
>>
>>
>> I changed the the extension pattern to ^(.*) ... still the same result
>>
>> Could you please share an example freeswitch.xml.fsxml file ? ... maybe
>> the problem is how the includes are handled, so something is not on the xml
>> node it needs to.
>>
>> I miss a command like the 'show dialplan' ... where you could check how
>> an specific call would behalf
>>
>>
>> 2017-05-16 19:01 GMT+01:00 David Villasmil <david.villasmil.work at gmail.
>> com>:
>>
>>> Hello,
>>>
>>> You need to start by understanding freeswitch before comparing the two,
>>> i work with both and there's just no comparison, as far as I'm concerned.
>>>
>>> When you create a profile, this profile binds to a port. In the profile
>>> config there's two params, context and diaplan (though tbh until today i
>>> never ever touched the dialplan param, as i haven't had any need to do it.
>>> If i need a simple diaplan, i just remove all xmls included in said diaplan
>>> and have just one file.
>>>
>>> Now, the "context" param, along with the includes, is what fs uses to
>>> hunt for extensions. Any file loaded from the profile which includes the
>>> context name, will be use to hunt for an extension.
>>>
>>> You haven't posted your profile, so it's hard to figure out what could
>>> be wrong, as when i tried it, it worked perfectly. I should note i
>>> commented out the context param.
>>>
>>> For the sake of simplicity, can you change your extension to answer
>>> EVERYTHING, (i.e.: "^(.*)") ?
>>>
>>>
>>>
>>> On Tue, May 16, 2017 at 7:53 PM Raúl Alexis Betancor Santana <
>>> rbetancor at gmail.com> wrote:
>>>
>>>> Just for the shake of simplicity ... on the Asterisk world would be
>>>> something like:
>>>>
>>>> exten => _1NXXNXXXXXX,1,Noop("T38 Gateway Call")
>>>> exten => _1NXXNXXXXXX,n,Set(FAXOPT(gateway)=yes)
>>>> exten => _1NXXNXXXXXX,n,Dial(SIP/${EXTEN}@proxy.server.tld)
>>>>
>>>> I just want to make the same with FS, but not allowing T38 passthrought
>>>> at all ...  just T38 (a leg) to Ulaw (b leg)
>>>>
>>>> 2017-05-16 17:48 GMT+01:00 Raúl Alexis Betancor Santana <
>>>> rbetancor at gmail.com>:
>>>>
>>>>> Same result ... No Route, Aborting
>>>>>
>>>>> Lets see if I found some step-by-step tutorial that explains who the
>>>>> dialplan works. The doc on the Wiki it's not clear enought for me.
>>>>>
>>>>> 2017-05-16 17:40 GMT+01:00 David Villasmil <
>>>>> david.villasmil.work at gmail.com>:
>>>>>
>>>>>> That was my test extension, you can replace it for whatever you need
>>>>>> :)
>>>>>>>>>>>>
>>>>>> Regards,
>>>>>>
>>>>>> David Villasmil
>>>>>> email: david.villasmil.work at gmail.com
>>>>>> phone: +34669448337 <+34%20669%2044%2083%2037>
>>>>>>
>>>>>> On Tue, May 16, 2017 at 6:38 PM, Raúl Alexis Betancor Santana <
>>>>>> rbetancor at gmail.com> wrote:
>>>>>>
>>>>>>> I don't get the point of calling a user/$1 ... as there is no users
>>>>>>> registered against this FS ... I just want to use it as a T38->Ulaw gateway.
>>>>>>>
>>>>>>> 2017-05-16 17:34 GMT+01:00 David Villasmil <
>>>>>>> david.villasmil.work at gmail.com>:
>>>>>>>
>>>>>>>> that context line is not necessary, btw. point is you need the
>>>>>>>> section:
>>>>>>>>
>>>>>>>> <?xml version="1.0" encoding="UTF-8" standalone="no"?>
>>>>>>>> <document type="freeswitch/xml">
>>>>>>>>   <section name="dialplan" description="RE Dial Plan For
>>>>>>>> FreeSwitch">
>>>>>>>>   <extension name="local_call">
>>>>>>>>     <condition field="destination_number" expression="^(10..)$">
>>>>>>>>       <action application="bridge" data="user/$1"/>
>>>>>>>>       <action application="hangup"/>
>>>>>>>>     </condition>
>>>>>>>>   </extension>
>>>>>>>> <section/>
>>>>>>>>>>>>>>>>
>>>>>>>> Regards,
>>>>>>>>
>>>>>>>> David Villasmil
>>>>>>>> email: david.villasmil.work at gmail.com
>>>>>>>> phone: +34669448337 <+34%20669%2044%2083%2037>
>>>>>>>>
>>>>>>>> On Tue, May 16, 2017 at 6:33 PM, David Villasmil <
>>>>>>>> david.villasmil.work at gmail.com> wrote:
>>>>>>>>
>>>>>>>>> Ok i've looked at the source code for mod_dialplan and in your
>>>>>>>>> xml, you need something like:
>>>>>>>>>
>>>>>>>>> <?xml version="1.0" encoding="utf-8"?>
>>>>>>>>> <document type="freeswitch/xml">
>>>>>>>>>   <section name="dialplan" description="RE Dial Plan For
>>>>>>>>> FreeSwitch">
>>>>>>>>>
>>>>>>>>>   <context name="default">
>>>>>>>>>
>>>>>>>>>   <extension name="local_call">
>>>>>>>>>     <condition field="destination_number" expression="^(10..)$">
>>>>>>>>>       <action application="bridge" data="user/$1"/>
>>>>>>>>>       <action application="hangup"/>
>>>>>>>>>     </condition>
>>>>>>>>>   </extension>
>>>>>>>>>
>>>>>>>>> <section/this works for me
>>>>>>>>>>>>>>>>>>
>>>>>>>>> Regards,
>>>>>>>>>
>>>>>>>>> David Villasmil
>>>>>>>>> email: david.villasmil.work at gmail.com
>>>>>>>>> phone: +34669448337 <+34%20669%2044%2083%2037>
>>>>>>>>>
>>>>>>>>> On Tue, May 16, 2017 at 5:26 PM, Raúl Alexis Betancor Santana <
>>>>>>>>> rbetancor at gmail.com> wrote:
>>>>>>>>>
>>>>>>>>>> Ok, I think the whole point is that I don't undestand how the
>>>>>>>>>> dialplan works.
>>>>>>>>>>
>>>>>>>>>> I started from 0 ... now on the sofia.conf.xml I have this:
>>>>>>>>>> <configuration name="sofia.conf" description="sofia Endpoint">
>>>>>>>>>>
>>>>>>>>>>  <global_settings>
>>>>>>>>>>    <param name="log-level" value="0"/>
>>>>>>>>>>    <!-- <param name="auto-restart" value="false"/> -->
>>>>>>>>>>    <param name="debug-presence" value="0"/>
>>>>>>>>>>  </global_settings>
>>>>>>>>>>
>>>>>>>>>>  <profiles>
>>>>>>>>>>        <profile name="fax">
>>>>>>>>>>          <gateways>
>>>>>>>>>>          <X-PRE-PROCESS cmd="include" data="../gateways/*.xml"/>
>>>>>>>>>>          </gateways>
>>>>>>>>>>
>>>>>>>>>>          <domains>
>>>>>>>>>>            <domain name="all" alias="false" parse="false"/>
>>>>>>>>>>          </domains>
>>>>>>>>>>
>>>>>>>>>>          <settings>
>>>>>>>>>>            <param name="debug" value="0"/>
>>>>>>>>>>            <param name="shutdown-on-fail" value="true"/>
>>>>>>>>>>            <param name="sip-trace" value="no"/>
>>>>>>>>>>            <param name="sip-capture" value="yes"/>
>>>>>>>>>>            <param name="capture-server"
>>>>>>>>>> value="udp:$${homer_ip}:$${homer_port};hep=3;capture_id=2001"/>
>>>>>>>>>>            <param name="rfc2833-pt" value="101"/>
>>>>>>>>>>            <!--<param name="enable-rfc-5626" value="true"/> -->
>>>>>>>>>>
>>>>>>>>>>            <param name="t38-trace" value="true"/>
>>>>>>>>>>            <param name="dialplan" value="XML"/>
>>>>>>>>>>
>>>>>>>>>>            <param name="context" value="incoming"/>
>>>>>>>>>>
>>>>>>>>>>            <param name="dtmf-duration" value="2000"/>
>>>>>>>>>>            <param name="codec-prefs" value="PCMU"/>
>>>>>>>>>>            <param name="disable-hold" value="true"/>
>>>>>>>>>>
>>>>>>>>>>            <param name="rtp-timer-name" value="soft"/>
>>>>>>>>>>            <param name="local-network-acl"
>>>>>>>>>> value="localnet.auto"/>
>>>>>>>>>>            <param name="manage-presence" value="false"/>
>>>>>>>>>>
>>>>>>>>>>            <param name="inbound-codec-negotiation"
>>>>>>>>>> value="generous"/>
>>>>>>>>>>            <param name="nonce-ttl" value="60"/>
>>>>>>>>>>            <param name="auth-calls" value="false"/>
>>>>>>>>>>            <param name="disable-register" value="true"/>
>>>>>>>>>>
>>>>>>>>>>            <param name="inbound-late-negotiation"
>>>>>>>>>> value="false"/>
>>>>>>>>>>            <param name="inbound-zrtp-passthru" value="false"/>
>>>>>>>>>>
>>>>>>>>>>            <param name="sip-port" value="5060"/>
>>>>>>>>>>            <param name="rtp-ip" value="$${sofia_ip}"/>
>>>>>>>>>>            <param name="sip-ip" value="$${sofia_ip}"/>
>>>>>>>>>>            <param name="ext-rtp-ip" value="$${sofia_ip}"/>
>>>>>>>>>>            <param name="ext-sip-ip" value="$${sofia_ip}"/>
>>>>>>>>>>
>>>>>>>>>>            <param name="rtp-timeout-sec" value="300"/>
>>>>>>>>>>            <param name="rtp-hold-timeout-sec" value="1800"/>
>>>>>>>>>>
>>>>>>>>>>            <param name="tls" value="false"/>
>>>>>>>>>>            <param name="tls-only" value="false"/>
>>>>>>>>>>            <param name="tls-bind-params" value="transport=tls"/>
>>>>>>>>>>            <param name="tls-sip-port" value="5061"/>
>>>>>>>>>>            <!-- Location of the agent.pem and cafile.pem ssl
>>>>>>>>>> certificates (needed for TLS server) -->
>>>>>>>>>>            <param name="tls-cert-dir"
>>>>>>>>>> value="$${base_dir}/conf/ssl"/>
>>>>>>>>>>            <param name="tls-passphrase" value=""/>
>>>>>>>>>>            <param name="tls-verify-date" value="true"/>
>>>>>>>>>>            <!-- set to 'in' to only verify incoming connections,
>>>>>>>>>> 'out' to only verify outgoing connections, 'all' to verify all connections,
>>>>>>>>>> also 'in_subjects', 'out_subjects' and 'all_subjects' for subject
>>>>>>>>>> validation. Multiple policies can be split with a '|' pipe -->
>>>>>>>>>>            <param name="tls-verify-policy" value="none"/>
>>>>>>>>>>            <param name="tls-verify-depth" value="2"/>
>>>>>>>>>>            <!-- If the tls-verify-policy is set to subjects_all
>>>>>>>>>> or subjects_in this sets which subjects are allowed, multiple subjects can
>>>>>>>>>> be split with a '|' pipe -->
>>>>>>>>>>            <param name="tls-verify-in-subjects" value=""/>
>>>>>>>>>>            <!-- TLS version ("sslv23" (default), "tlsv1"). NOTE:
>>>>>>>>>> Phones may not work with TLSv1 -->
>>>>>>>>>>            <param name="tls-version" value="tlsv1"/>
>>>>>>>>>>          </settings>
>>>>>>>>>>        </profile>
>>>>>>>>>>  </profiles>
>>>>>>>>>>
>>>>>>>>>> </configuration>
>>>>>>>>>>
>>>>>>>>>>
>>>>>>>>>> Then on the t38_transconde.xml file I have this.
>>>>>>>>>>
>>>>>>>>>> <include>
>>>>>>>>>> <context name="incoming">
>>>>>>>>>> <extension name="t38_transcode">
>>>>>>>>>>  <condition field="destination_number"
>>>>>>>>>> expresion="^(\+1|1)?([2-9]\d\d[2-9]\d{6})$">
>>>>>>>>>>    <action application="set" data="fax_enable_t38=true"/>
>>>>>>>>>>    <action application="set" data="sip_execute_on_image=t38_gateway
>>>>>>>>>> peer nocng"/>
>>>>>>>>>>    <action application="bridge" data="sofia/external/$1$2@$${external_sip_proxy}"/>
>>>>>>>>>>
>>>>>>>>>>  </condition>
>>>>>>>>>> </extension>
>>>>>>>>>> </context>
>>>>>>>>>> </include>
>>>>>>>>>>
>>>>>>>>>>
>>>>>>>>>> I could see on the /var/log/freeswitch/freeswitch.xml.fsxml file
>>>>>>>>>> that the t38_transcode.xml file its included ... but still get the same
>>>>>>>>>> error on on the console, so something terrible wrong I'm missing here ...
>>>>>>>>>> :-(
>>>>>>>>>>
>>>>>>>>>> Also ... it's possible to directly send the calls sofia/$1$2@$${external}
>>>>>>>>>> ? ... I mean, sending the call directly to a URI, with username/password
>>>>>>>>>> and so on ... instead of having to define a profile for it.
>>>>>>>>>>
>>>>>>>>>>
>>>>>>>>>> 2017-05-16 16:13 GMT+01:00 David Villasmil <
>>>>>>>>>> david.villasmil.work at gmail.com>:
>>>>>>>>>>
>>>>>>>>>>> No, you may be sending it to the right ports, but the profile
>>>>>>>>>>> attached to that port must have the context set to the correct dialplan.
>>>>>>>>>>>
>>>>>>>>>>> I just did exactly what you're doing and i also got "No Route,
>>>>>>>>>>> Aborting"
>>>>>>>>>>>
>>>>>>>>>>> I've never seen this type of "dialplan" value, tbh
>>>>>>>>>>>
>>>>>>>>>>> <param name="dialplan" value="XML:/etc/freeswitch/dia
>>>>>>>>>>> lplans/t38_transcode.xml"/>
>>>>>>>>>>>
>>>>>>>>>>>
>>>>>>>>>>> Regards,
>>>>>>>>>>>
>>>>>>>>>>> David Villasmil
>>>>>>>>>>> email: david.villasmil.work at gmail.com
>>>>>>>>>>> phone: +34669448337 <+34%20669%2044%2083%2037>
>>>>>>>>>>>
>>>>>>>>>>> On Tue, May 16, 2017 at 3:30 PM, Raúl Alexis Betancor Santana <
>>>>>>>>>>> rbetancor at gmail.com> wrote:
>>>>>>>>>>>
>>>>>>>>>>>> Only one profile defined on the sofia.conf.xml and I'm sending
>>>>>>>>>>>> the traffict to the wright ports, if not I whould get the logs on the
>>>>>>>>>>>> console, as that are the only ports enabled.
>>>>>>>>>>>>
>>>>>>>>>>>> 2017-05-16 14:22 GMT+01:00 David Villasmil <
>>>>>>>>>>>> david.villasmil.work at gmail.com>:
>>>>>>>>>>>>
>>>>>>>>>>>>> Take a look at your profile, it should be listening on the
>>>>>>>>>>>>> port you're sending to, and must have the context parameter set to your
>>>>>>>>>>>>> dialplan name.
>>>>>>>>>>>>> On Tue, May 16, 2017 at 3:15 PM Raúl Alexis Betancor Santana <
>>>>>>>>>>>>> rbetancor at gmail.com> wrote:
>>>>>>>>>>>>>
>>>>>>>>>>>>>>
>>>>>>>>>>>>>> Hi all, till now I'm been working with pre-made setup files
>>>>>>>>>>>>>> for FS, and now I'm trying to get a deep knowleadge of how the dialplan
>>>>>>>>>>>>>> works.
>>>>>>>>>>>>>>
>>>>>>>>>>>>>> So I modifed my autoload_configs/sofia.conf.xml file and
>>>>>>>>>>>>>> changed my dialplan param to something like this:
>>>>>>>>>>>>>>
>>>>>>>>>>>>>> <param name="dialplan" value="XML:/etc/freeswitch/
>>>>>>>>>>>>>> dialplans/t38_transcode.xml,inline:socket:127.0.0.1:8022
>>>>>>>>>>>>>> async full"/>
>>>>>>>>>>>>>>
>>>>>>>>>>>>>> The Idea is that it loads another .xml file especific task
>>>>>>>>>>>>>> and also use a dialplan throught a socket to a daemon that handle the rest.
>>>>>>>>>>>>>>
>>>>>>>>>>>>>> On my t38_transcode.xml file ... very simple:
>>>>>>>>>>>>>>
>>>>>>>>>>>>>> <extension name="t38_transcode">
>>>>>>>>>>>>>>  <condition field="sip_h_X-T38-Transcode" expresion="^True"/>
>>>>>>>>>>>>>>  <condition field="destination_number"
>>>>>>>>>>>>>> expresion="^(\+1|1)?([2-9]\d\d[2-9]\d{6})$">
>>>>>>>>>>>>>>    <action application="set" data="fax_enable_t38=true"/>
>>>>>>>>>>>>>>    <action application="set" data="t38_trace=true"/>
>>>>>>>>>>>>>>    <action application="set" data="sip_execute_on_image=t38_gateway
>>>>>>>>>>>>>> peer nocng"/>
>>>>>>>>>>>>>>    <action application="bridge" data="sofia/external/$1$2 at proxy.server.tld"/>
>>>>>>>>>>>>>>
>>>>>>>>>>>>>>  </condition>
>>>>>>>>>>>>>> </extension>
>>>>>>>>>>>>>>
>>>>>>>>>>>>>> But If I fire a call to FS like [number]@[FS_IP] from a sip
>>>>>>>>>>>>>> testing client I get
>>>>>>>>>>>>>>
>>>>>>>>>>>>>> [INFO] switch_core_state_machine.c:311 No Route, Aborting
>>>>>>>>>>>>>>
>>>>>>>>>>>>>> What I'm doing wrong here?
>>>>>>>>>>>>>>
>>>>>>>>>>>>>> My target its just I want to ANY call that came in with a SIP
>>>>>>>>>>>>>> header of X-T39-Transcode=True (market by a sip proxy elsewhere on the net)
>>>>>>>>>>>>>> just do a T38->Ulaw transcoding saving the T38 trace, so I could inspect it
>>>>>>>>>>>>>> later.
>>>>>>>>>>>>>> The rest of calls coming in ... as they don't have the
>>>>>>>>>>>>>> sip-header should end on other app.
>>>>>>>>>>>>>>
>>>>>>>>>>>>>> For doing the testing I disabled the socket_inline part of
>>>>>>>>>>>>>> the dialplan string, so it have only this:
>>>>>>>>>>>>>>
>>>>>>>>>>>>>> <param name="dialplan" value="XML:/etc/freeswitch/
>>>>>>>>>>>>>> dialplans/t38_transcode.xml"/>
>>>>>>>>>>>>>>
>>>>>>>>>>>>>> Did I miss something? ... or maybe missundestood who the xml
>>>>>>>>>>>>>> dialplan works ?
>>>>>>>>>>>>>> ____________________________________________________________
>>>>>>>>>>>>>> _____________
>>>>>>>>>>>>>> Professional FreeSWITCH Consulting Services:
>>>>>>>>>>>>>> consulting at freeswitch.org
>>>>>>>>>>>>>> http://www.freeswitchsolutions.com
>>>>>>>>>>>>>>
>>>>>>>>>>>>>> Official FreeSWITCH Sites
>>>>>>>>>>>>>> http://www.freeswitch.org
>>>>>>>>>>>>>> http://confluence.freeswitch.org
>>>>>>>>>>>>>> http://www.cluecon.com
>>>>>>>>>>>>>>
>>>>>>>>>>>>>> FreeSWITCH-users mailing list
>>>>>>>>>>>>>> FreeSWITCH-users at lists.freeswitch.org
>>>>>>>>>>>>>> http://lists.freeswitch.org/mailman/listinfo/freeswitch-users
>>>>>>>>>>>>>> UNSUBSCRIBE:http://lists.freeswitch.org/mailman/
>>>>>>>>>>>>>> options/freeswitch-users
>>>>>>>>>>>>>> http://www.freeswitch.org
>>>>>>>>>>>>>
>>>>>>>>>>>>>
>>>>>>>>>>>>> ____________________________________________________________
>>>>>>>>>>>>> _____________
>>>>>>>>>>>>> Professional FreeSWITCH Consulting Services:
>>>>>>>>>>>>> consulting at freeswitch.org
>>>>>>>>>>>>> http://www.freeswitchsolutions.com
>>>>>>>>>>>>>
>>>>>>>>>>>>> Official FreeSWITCH Sites
>>>>>>>>>>>>> http://www.freeswitch.org
>>>>>>>>>>>>> http://confluence.freeswitch.org
>>>>>>>>>>>>> http://www.cluecon.com
>>>>>>>>>>>>>
>>>>>>>>>>>>> FreeSWITCH-users mailing list
>>>>>>>>>>>>> FreeSWITCH-users at lists.freeswitch.org
>>>>>>>>>>>>> http://lists.freeswitch.org/mailman/listinfo/freeswitch-users
>>>>>>>>>>>>> UNSUBSCRIBE:http://lists.freeswitch.org/mailman/
>>>>>>>>>>>>> options/freeswitch-users
>>>>>>>>>>>>> http://www.freeswitch.org
>>>>>>>>>>>>>
>>>>>>>>>>>>
>>>>>>>>>>>>
>>>>>>>>>>>> ____________________________________________________________
>>>>>>>>>>>> _____________
>>>>>>>>>>>> Professional FreeSWITCH Consulting Services:
>>>>>>>>>>>> consulting at freeswitch.org
>>>>>>>>>>>> http://www.freeswitchsolutions.com
>>>>>>>>>>>>
>>>>>>>>>>>> Official FreeSWITCH Sites
>>>>>>>>>>>> http://www.freeswitch.org
>>>>>>>>>>>> http://confluence.freeswitch.org
>>>>>>>>>>>> http://www.cluecon.com
>>>>>>>>>>>>
>>>>>>>>>>>> FreeSWITCH-users mailing list
>>>>>>>>>>>> FreeSWITCH-users at lists.freeswitch.org
>>>>>>>>>>>> http://lists.freeswitch.org/mailman/listinfo/freeswitch-users
>>>>>>>>>>>> UNSUBSCRIBE:http://lists.freeswitch.org/mailman/
>>>>>>>>>>>> options/freeswitch-users
>>>>>>>>>>>> http://www.freeswitch.org
>>>>>>>>>>>>
>>>>>>>>>>>
>>>>>>>>>>>>>>>>>>>>>>
>>>>>>>>>>> ____________________________________________________________
>>>>>>>>>>> _____________
>>>>>>>>>>> Professional FreeSWITCH Consulting Services:
>>>>>>>>>>> consulting at freeswitch.org
>>>>>>>>>>> http://www.freeswitchsolutions.com
>>>>>>>>>>>
>>>>>>>>>>> Official FreeSWITCH Sites
>>>>>>>>>>> http://www.freeswitch.org
>>>>>>>>>>> http://confluence.freeswitch.org
>>>>>>>>>>> http://www.cluecon.com
>>>>>>>>>>>
>>>>>>>>>>> FreeSWITCH-users mailing list
>>>>>>>>>>> FreeSWITCH-users at lists.freeswitch.org
>>>>>>>>>>> http://lists.freeswitch.org/mailman/listinfo/freeswitch-users
>>>>>>>>>>> UNSUBSCRIBE:http://lists.freeswitch.org/mailman/
>>>>>>>>>>> options/freeswitch-users
>>>>>>>>>>> http://www.freeswitch.org
>>>>>>>>>>>
>>>>>>>>>>
>>>>>>>>>>
>>>>>>>>>> ____________________________________________________________
>>>>>>>>>> _____________
>>>>>>>>>> Professional FreeSWITCH Consulting Services:
>>>>>>>>>> consulting at freeswitch.org
>>>>>>>>>> http://www.freeswitchsolutions.com
>>>>>>>>>>
>>>>>>>>>> Official FreeSWITCH Sites
>>>>>>>>>> http://www.freeswitch.org
>>>>>>>>>> http://confluence.freeswitch.org
>>>>>>>>>> http://www.cluecon.com
>>>>>>>>>>
>>>>>>>>>> FreeSWITCH-users mailing list
>>>>>>>>>> FreeSWITCH-users at lists.freeswitch.org
>>>>>>>>>> http://lists.freeswitch.org/mailman/listinfo/freeswitch-users
>>>>>>>>>> UNSUBSCRIBE:http://lists.freeswitch.org/mailman/
>>>>>>>>>> options/freeswitch-users
>>>>>>>>>> http://www.freeswitch.org
>>>>>>>>>>
>>>>>>>>>
>>>>>>>>>
>>>>>>>>
>>>>>>>> ____________________________________________________________
>>>>>>>> _____________
>>>>>>>> Professional FreeSWITCH Consulting Services:
>>>>>>>> consulting at freeswitch.org
>>>>>>>> http://www.freeswitchsolutions.com
>>>>>>>>
>>>>>>>> Official FreeSWITCH Sites
>>>>>>>> http://www.freeswitch.org
>>>>>>>> http://confluence.freeswitch.org
>>>>>>>> http://www.cluecon.com
>>>>>>>>
>>>>>>>> FreeSWITCH-users mailing list
>>>>>>>> FreeSWITCH-users at lists.freeswitch.org
>>>>>>>> http://lists.freeswitch.org/mailman/listinfo/freeswitch-users
>>>>>>>> UNSUBSCRIBE:http://lists.freeswitch.org/mailman/
>>>>>>>> options/freeswitch-users
>>>>>>>> http://www.freeswitch.org
>>>>>>>>
>>>>>>>
>>>>>>>
>>>>>>> ____________________________________________________________
>>>>>>> _____________
>>>>>>> Professional FreeSWITCH Consulting Services:
>>>>>>> consulting at freeswitch.org
>>>>>>> http://www.freeswitchsolutions.com
>>>>>>>
>>>>>>> Official FreeSWITCH Sites
>>>>>>> http://www.freeswitch.org
>>>>>>> http://confluence.freeswitch.org
>>>>>>> http://www.cluecon.com
>>>>>>>
>>>>>>> FreeSWITCH-users mailing list
>>>>>>> FreeSWITCH-users at lists.freeswitch.org
>>>>>>> http://lists.freeswitch.org/mailman/listinfo/freeswitch-users
>>>>>>> UNSUBSCRIBE:http://lists.freeswitch.org/mailman/
>>>>>>> options/freeswitch-users
>>>>>>> http://www.freeswitch.org
>>>>>>>
>>>>>>
>>>>>>
>>>>>> ____________________________________________________________
>>>>>> _____________
>>>>>> Professional FreeSWITCH Consulting Services:
>>>>>> consulting at freeswitch.org
>>>>>> http://www.freeswitchsolutions.com
>>>>>>
>>>>>> Official FreeSWITCH Sites
>>>>>> http://www.freeswitch.org
>>>>>> http://confluence.freeswitch.org
>>>>>> http://www.cluecon.com
>>>>>>
>>>>>> FreeSWITCH-users mailing list
>>>>>> FreeSWITCH-users at lists.freeswitch.org
>>>>>> http://lists.freeswitch.org/mailman/listinfo/freeswitch-users
>>>>>> UNSUBSCRIBE:http://lists.freeswitch.org/mailman/
>>>>>> options/freeswitch-users
>>>>>> http://www.freeswitch.org
>>>>>>
>>>>>
>>>>>
>>>> ____________________________________________________________
>>>> _____________
>>>> Professional FreeSWITCH Consulting Services:
>>>> consulting at freeswitch.org
>>>> http://www.freeswitchsolutions.com
>>>>
>>>> Official FreeSWITCH Sites
>>>> http://www.freeswitch.org
>>>> http://confluence.freeswitch.org
>>>> http://www.cluecon.com
>>>>
>>>> FreeSWITCH-users mailing list
>>>> FreeSWITCH-users at lists.freeswitch.org
>>>> http://lists.freeswitch.org/mailman/listinfo/freeswitch-users
>>>> UNSUBSCRIBE:http://lists.freeswitch.org/mailman/
>>>> options/freeswitch-users
>>>> http://www.freeswitch.org
>>>
>>>
>>> ____________________________________________________________
>>> _____________
>>> Professional FreeSWITCH Consulting Services:
>>> consulting at freeswitch.org
>>> http://www.freeswitchsolutions.com
>>>
>>> Official FreeSWITCH Sites
>>> http://www.freeswitch.org
>>> http://confluence.freeswitch.org
>>> http://www.cluecon.com
>>>
>>> FreeSWITCH-users mailing list
>>> FreeSWITCH-users at lists.freeswitch.org
>>> http://lists.freeswitch.org/mailman/listinfo/freeswitch-users
>>> UNSUBSCRIBE:http://lists.freeswitch.org/mailman/options/freeswitch-users
>>> http://www.freeswitch.org
>>>
>>
>> _________________________________________________________________________
>> Professional FreeSWITCH Consulting Services:
>> consulting at freeswitch.org
>> http://www.freeswitchsolutions.com
>>
>> Official FreeSWITCH Sites
>> http://www.freeswitch.org
>> http://confluence.freeswitch.org
>> http://www.cluecon.com
>>
>> FreeSWITCH-users mailing list
>> FreeSWITCH-users at lists.freeswitch.org
>> http://lists.freeswitch.org/mailman/listinfo/freeswitch-users
>> UNSUBSCRIBE:http://lists.freeswitch.org/mailman/options/freeswitch-users
>> http://www.freeswitch.org
>
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: http://lists.freeswitch.org/pipermail/freeswitch-users/attachments/20170516/c4c7d0c6/attachment-0001.html 


More information about the FreeSWITCH-users mailing list