[Freeswitch-users] Broadcasting conference with mod_rtmp

Anthony Minessale anthony.minessale at gmail.com
Thu Sep 15 00:26:26 MSD 2016


It only broadcasts to a server, it does not act as a relay you need either
crtmpd or redfive etc.
We could maybe make that possible some day with enough code but its not
possible at all today.


I see mit.edu in your logs.  Doing some academic research?  Contact us
directly, consulting at freeswitch.org and/or press the "live chat" button on
https://freeswitch.org  we like working with universities.



On Wed, Sep 14, 2016 at 1:52 PM, Stephen Dame <sdame at 207me.com> wrote:

> rtmp://nothangout.media.mit.edu/plenary-test  <--- this needs to be a
> server
> publish point on some red5/fms server. or nginx configured correctly to
> publish the stream to it at that mount point.
>
>
>
> Regards,
> Stephen
>
> HostBBB - Online Learning Solutions
> 207 Technology Group Inc.   1-888-229-9756  skype: Stephen_Dame
>
> -----Original Message-----
> From: freeswitch-users-bounces at lists.freeswitch.org
> [mailto:freeswitch-users-bounces at lists.freeswitch.org] On Behalf Of
> Charlie
> DeTar
> Sent: Wednesday, September 14, 2016 1:56 PM
> To: freeswitch-users at lists.freeswitch.org
> Subject: Re: [Freeswitch-users] Broadcasting conference with mod_rtmp
>
> Thanks!  I tried this, but didn't get success yet.  Maybe I've
> misunderstood
> something.  Here's what I tried:
>
> 1. I added `<load module="mod_av"/>` to modules.conf.xml, and restarted
> freeswitch.
>
> 2. I connected participants to a conference with destination number
> "plenary-test".  This is what `conference list` in fs_cli shows after
> this:
>
> Conference plenary-test (1 member rate: 44100 flags:
> running|answered|enforce_min|dynamic|exit_sound|enter_sound|livearray_sy
> running|answered|nc|transcode_video|video_muxing|minimize_video_encoding
> running|answered||json_status)
> 1;verto.rtc/plenary-test;4ae28d9e-cf98-363f-ed40-
> 2b6544fb8685;Anonymous;plen
> ary_user at nothangout.media.mit.edu;hear|speak|video|floor|
> vid-floor;0;0;0;200
>
> 3. In fs_cli, I issued the following command:
>
>     conference plenary-test record
>     rtmp://nothangout.media.mit.edu/plenary-test
>
> The domain here is the same domain as the freeswitch server.  There is no
> red5/wowza/nginx-mod-rtmp/etc running on this server yet.  This produced
> the
> logs below. [0]
>
> 4. I attempted to connect to
> rtmp://nothangout.media.mit.edu/plenary-test using mplayer, vlc, and
> rtmpdump. None of them receive any data.
>
> Shortly after issuing `conference plenary-test record ...`, whether or not
> I
> attempt to connect an rtmp client, freeswitch appears to crash -- the logs
> show freeswitch starting up, the verto browser session reloads, and the
> fs_cli socket is lost.  I don't see anything in the logs about a crash (it
> just up-and-reboots).
>
>
> Have I missed a step here?  Does freeswitch need a running red5/etc.
> server that it is connecting to when I issue the `record` command, or is it
> producing a stream that an rtmp client should be able to consume?
> Forgive my ignorance here; I'm new to rtmp streaming.
>
> I'm running freeswitch 1.6.10~17~726, via freeswitch's debian packages, on
> debian 8.5.
>
> best,
> Charlie
>
>
> [0] Debug log after issuing `conference plenary-test record ...`, and
> before
> freeswitch crashes:
>
> 2016-09-14 17:41:57.378173 [DEBUG] avformat.c:1701 sample rate: 44100,
> channels: 2
> Parsing...
> Parsed protocol: 0
> Parsed host    : nothangout.media.mit.edu
> Parsed app     : plenary-test
> RTMP_Connect1, ... connected, handshaking
> 2016-09-14 17:41:57.408166 [NOTICE] mod_rtmp.c:903 New RTMP session
> [81e27b34-92ae-4fd8-9d8b-6ba58ed32e80]
> 81e27b34-92ae-4fd8-9d8b-6ba58ed32e80 2016-09-14 17:41:57.408166 [INFO]
> rtmp_tcp.c:234 Rtmp connection from 18.85.44.183:54786
> 81e27b34-92ae-4fd8-9d8b-6ba58ed32e80 2016-09-14 17:41:57.408166 [DEBUG]
> rtmp.c:882 Sent handshake response
> HandShake: Type Answer   : 03
> HandShake: Server Uptime : 414322
> HandShake: FMS Version   : 0.0.0.0
> HandShake: Handshaking finished....
> RTMP_Connect1, handshaked
> 81e27b34-92ae-4fd8-9d8b-6ba58ed32e80 2016-09-14 17:41:57.408166 [DEBUG]
> rtmp.c:907 Done with handshake
> 81e27b34-92ae-4fd8-9d8b-6ba58ed32e80 2016-09-14 17:41:57.408166 [DEBUG]
> rtmp.c:1081 [chunk_stream=3 type=0x14 ts=0 stream_id=0x0] len=116 Invoking
> connect
> 81e27b34-92ae-4fd8-9d8b-6ba58ed32e80 2016-09-14 17:41:57.408166 [DEBUG]
> rtmp.c:192 [amfnumber=3] Got INVOKE for connect
> 81e27b34-92ae-4fd8-9d8b-6ba58ed32e80 2016-09-14 17:41:57.408166 [DEBUG]
> rtmp.c:656 [amfnumber=2 type=0x1 stream_id=0x0] len=4
> 81e27b34-92ae-4fd8-9d8b-6ba58ed32e80 2016-09-14 17:41:57.408166 [DEBUG]
> rtmp.c:656 [amfnumber=2 type=0x5 stream_id=0x0] len=4
> 81e27b34-92ae-4fd8-9d8b-6ba58ed32e80 2016-09-14 17:41:57.408166 [DEBUG]
> rtmp.c:656 [amfnumber=2 type=0x6 stream_id=0x0] len=5
> 81e27b34-92ae-4fd8-9d8b-6ba58ed32e80 2016-09-14 17:41:57.408166 [DEBUG]
> rtmp.c:656 [amfnumber=2 type=0x4 stream_id=0x0] len=6
> HandleChangeChunkSize,
> received: chunk size change to 512
> HandleServerBW: server BW = 2097152
> HandleClientBW: client BW = 2097152 1
> 81e27b34-92ae-4fd8-9d8b-6ba58ed32e80 2016-09-14 17:41:57.408166 [DEBUG]
> rtmp.c:656 [amfnumber=3 type=0x14 stream_id=0x0] len=201 HandleCtrl,
> received ctrl. type: 0, len: 6 HandleCtrl, Stream Begin 0
> 81e27b34-92ae-4fd8-9d8b-6ba58ed32e80 2016-09-14 17:41:57.408166 [DEBUG]
> rtmp.c:656 [amfnumber=3 type=0x14 stream_id=0x0] len=61
> 81e27b34-92ae-4fd8-9d8b-6ba58ed32e80 2016-09-14 17:41:57.408166 [NOTICE]
> rtmp_sig.c:122 Sent connect reply
> RTMP_ClientPacket, received: invoke 201 bytes (object begin)
> Property: <Name:           no-name., STRING:    _result>
> Property: <Name:           no-name., NUMBER:    1.00>
> Property: <Name:           no-name., OBJECT>
> (object begin)
> Property: <Name:             fmsVer, NUMBER:    1.00>
> Property: <Name:       capabilities, NUMBER:    31.00>
> (object end)
> Property: <Name:           no-name., OBJECT>
> (object begin)
> Property: <Name:              level, STRING:    status>
> Property: <Name:               code, STRING:
> NetConnection.Connect.Success>
> Property: <Name:        description, STRING:    Connection succeeded>
> Property: <Name:           clientId, NUMBER:    217834719.00>
> Property: <Name:     objectEncoding, NUMBER:    0.00>
> (object end)
> (object end)
> HandleInvoke, server invoking <_result>
> HandleInvoke, received result for method call <connect> Invoking
> releaseStream Invoking FCPublish Invoking createStream RTMP_ClientPacket,
> received: invoke 61 bytes (object begin)
> Property: <Name:           no-name., STRING:    connected>
> Property: <Name:           no-name., NUMBER:    0.00>
> Property: NULL
> Property: <Name:           no-name., STRING:
> 81e27b34-92ae-4fd8-9d8b-6ba58ed32e80>
> (object end)
> HandleInvoke, server invoking <connected>
> 81e27b34-92ae-4fd8-9d8b-6ba58ed32e80 2016-09-14 17:41:57.408166 [DEBUG]
> rtmp.c:1081 [chunk_stream=3 type=0x14 ts=0 stream_id=0x0] len=29
> 81e27b34-92ae-4fd8-9d8b-6ba58ed32e80 2016-09-14 17:41:57.408166 [DEBUG]
> rtmp.c:192 [amfnumber=3] Got INVOKE for releaseStream
> 81e27b34-92ae-4fd8-9d8b-6ba58ed32e80 2016-09-14 17:41:57.408166 [WARNING]
> rtmp.c:198 Unhandled invoke for "releaseStream"
> 81e27b34-92ae-4fd8-9d8b-6ba58ed32e80 2016-09-14 17:41:57.408166 [DEBUG]
> rtmp.c:1081 [chunk_stream=3 type=0x14 ts=0 stream_id=0x0] len=25
> 81e27b34-92ae-4fd8-9d8b-6ba58ed32e80 2016-09-14 17:41:57.408166 [DEBUG]
> rtmp.c:192 [amfnumber=3] Got INVOKE for FCPublish
> 81e27b34-92ae-4fd8-9d8b-6ba58ed32e80 2016-09-14 17:41:57.408166 [WARNING]
> rtmp.c:198 Unhandled invoke for "FCPublish"
> 81e27b34-92ae-4fd8-9d8b-6ba58ed32e80 2016-09-14 17:41:57.408166 [DEBUG]
> rtmp.c:1081 [chunk_stream=3 type=0x14 ts=0 stream_id=0x0] len=25
> 81e27b34-92ae-4fd8-9d8b-6ba58ed32e80 2016-09-14 17:41:57.408166 [DEBUG]
> rtmp.c:192 [amfnumber=3] Got INVOKE for createStream
> 81e27b34-92ae-4fd8-9d8b-6ba58ed32e80 2016-09-14 17:41:57.408166 [DEBUG]
> rtmp.c:656 [amfnumber=3 type=0x14 stream_id=0x0] len=29
> 81e27b34-92ae-4fd8-9d8b-6ba58ed32e80 2016-09-14 17:41:57.408166 [INFO]
> rtmp_sig.c:137 Replied to createStream (0) RTMP_ClientPacket, received:
> invoke 29 bytes (object begin)
> Property: <Name:           no-name., STRING:    _result>
> Property: <Name:           no-name., NUMBER:    4.00>
> Property: NULL
> Property: <Name:           no-name., NUMBER:    1.00>
> (object end)
> HandleInvoke, server invoking <_result>
> HandleInvoke, received result for method call <createStream> Invoking
> publish
> 81e27b34-92ae-4fd8-9d8b-6ba58ed32e80 2016-09-14 17:41:57.408166 [DEBUG]
> rtmp.c:1081 [chunk_stream=4 type=0x14 ts=0 stream_id=0x1] len=30
> 81e27b34-92ae-4fd8-9d8b-6ba58ed32e80 2016-09-14 17:41:57.408166 [DEBUG]
> rtmp.c:192 [amfnumber=4] Got INVOKE for publish
> 81e27b34-92ae-4fd8-9d8b-6ba58ed32e80 2016-09-14 17:41:57.408166 [DEBUG]
> rtmp.c:656 [amfnumber=2 type=0x4 stream_id=0x0] len=6
> 81e27b34-92ae-4fd8-9d8b-6ba58ed32e80 2016-09-14 17:41:57.408166 [DEBUG]
> rtmp.c:656 [amfnumber=5 type=0x14 stream_id=0x1] len=138
> 81e27b34-92ae-4fd8-9d8b-6ba58ed32e80 2016-09-14 17:41:57.408166 [INFO]
> rtmp_sig.c:290 Got publish on stream 1.
> HandleCtrl, received ctrl. type: 0, len: 6 HandleCtrl, Stream Begin 1
> RTMP_ClientPacket, received: invoke 138 bytes (object begin)
> Property: <Name:           no-name., STRING:    onStatus>
> Property: <Name:           no-name., NUMBER:    0.00>
> Property: NULL
> Property: <Name:           no-name., OBJECT>
> (object begin)
> Property: <Name:              level, STRING:    status>
> Property: <Name:               code, STRING:    NetStream.Publish.Start>
> Property: <Name:        description, STRING:    description>
> Property: <Name:            details, STRING:    details>
> Property: <Name:           clientid, NUMBER:    217834719.00>
> (object end)
> (object end)
> HandleInvoke, server invoking <onStatus> HandleInvoke, onStatus:
> NetStream.Publish.Start
> 2016-09-14 17:41:57.408166 [DEBUG] avformat.c:1804 use video codec: [28]
> h264 (H.264 / AVC / MPEG-4 AVC / MPEG-4 part 10)
> 2016-09-14 17:41:57.408166 [WARNING] avformat.c:506 Codec [aac] is
> experimental feature in libavcodec, never mind
> 2016-09-14 17:41:57.408166 [NOTICE] avformat.c:531 sample_rate: 44100
> nb_samples: 1024
> 2016-09-14 17:41:57.408166 [NOTICE] avformat.c:535 sample_fmt 8 !=
> AV_SAMPLE_FMT_S16, start resampler Output #0, flv, to
> 'rtmp://nothangout.media.mit.edu/plenary-test':
>     Stream #0.0: Audio: aac, 44100 Hz, stereo, fltp, 131 kb/s
> 2016-09-14 17:41:57.408166 [INFO] avformat.c:1829 Opening File
> [rtmp://nothangout.media.mit.edu/plenary-test] 44100hz  with VIDEO
> 2016-09-14 17:41:57.408166 [DEBUG] conference_record.c:279 Setup timer
> success interval: 20  samples: 882 using cpu capabilities: MMX2 SSE2Fast
> SSSE3 SSE4.2 AVX profile Constrained Baseline, level 4.1
> 264 - core 142 r2431 a5831aa - H.264/MPEG-4 AVC codec - Copyleft
> 2003-2014 - http://www.videolan.org/x264.html - options: cabac=0 ref=1
> deblock=1:0:0 analyse=0x1:0x111 me=hex subme=2 psy=1 psy_rd=1.00:0.00
> mixed_ref=0 me_range=16 chroma_me=1 trellis=0 8x8dct=0 cqm=0
> deadzone=21,11 fast_pskip=1 chroma_qp_offset=0 threads=4
> lookahead_threads=1 sliced_threads=0 nr=0 decimate=1 interlaced=0
> bluray_compat=0 constrained_intra=0 bframes=0 weightp=0 keyint=30
> keyint_min=16 scenecut=40 intra_refresh=0 rc_lookahead=10 rc=crf
> mbtree=1 crf=18.0 qcomp=0.60 qpmin=10 qpmax=31 qpstep=4 ip_ratio=1.41
> aq=1:1.00
> 2016-09-14 17:41:57.478159 [INFO] avformat.c:2366 use video codec
> implementation Video: libx264, yuv420p, 800x600, q=10-31, 516 kb/s
> 2016-09-14 17:41:57.478159 [NOTICE] avformat.c:613 video thread start
> 81e27b34-92ae-4fd8-9d8b-6ba58ed32e80 2016-09-14 17:41:58.458161 [DEBUG]
> rtmp.c:1081 [chunk_stream=4 type=0x12 ts=0 stream_id=0x1] len=382
>
>
> On Wed, Sep 14, 2016, at 05:58 AM, Stephen Dame wrote:
> > You want to load mod_av
> >
> > Then use
> >
> > conference xxxxxx record rtmp://yourserver.cpm/stream_id
> >
> > you can pass avconv args in this command as well to control encoding
> > options like frames per second and presets.
> >
> > This will send output of MCU to your red5, wowza, or properly
> > configure nginx rtmp module.
> >
> > Can also send it directly to youtube.
> >
> > Regards,
> > Stephen
> >
> > HostBBB - Online Learning Solutions
> > 207 Technology Group Inc.   1-888-229-9756  skype: Stephen_Dame
> >
> > -----Original Message-----
> > From: freeswitch-users-bounces at lists.freeswitch.org
> > [mailto:freeswitch-users-bounces at lists.freeswitch.org] On Behalf Of
> > Charlie DeTar
> > Sent: Tuesday, September 13, 2016 10:55 PM
> > To: freeswitch-users at lists.freeswitch.org
> > Subject: [Freeswitch-users] Broadcasting conference with mod_rtmp
> >
> > Hi,
> >
> > I'm trying to broadcast a WebRTC video conference (via mod_conference
> > and
> > mod_verto) over an rtmp stream, with the ultimate goal of transcoding
> > the rtmp stream for broadcast as an HTML5 video stream (likely using
> > something like https://github.com/arut/nginx-rtmp-module
> > for HSL and MPEG-DASH broadcasts).  I expect I have the same sort of
> > requirements of freeswitch that one would need for broadcasting rtmp
> > to youtube, which the docs mention glancingly without detail [0]. :)
> >
> > The video conferencing is working great -- but I'm struggling to
> > figure out how to access the RTMP stream for it.  My rtmp.conf.xml is
> > basically the default (but with `auth-calls` set to `false`).  My
> > dialplan is as
> > follows:
> >
> > <include>
> >   <extension name="plenary">
> >     <condition field="destination_number" expression="^plenary-.*$"
> >     break="never">
> >       <action application="answer"/>
> >       <action application="info"/>
> >       <action application="conference"
> >               data="${destination_number}@plenary-conference-profile"/>
> >     </condition>
> >   </extension>
> > </include>
> >
> > I'm able to connect to freeswitch using RTMP clients (I've tried
> > rtmpdump, mplayer, and vlc).  In fs_cli, I see debug info (example
> > copied below
> > [1])
> > that seems to indicate successful connections.
> > However, the RTMP client never receives any data from the server and
> > disconnects after around 30 seconds.
> >
> > I'm trying to connect via URLs like:
> > rtmp://<domain>:<port>/plenary-conferencename
> > rtmp://<domain>:<port>/plenary-conferencename at plenary-conference-profi
> > le rtmp://<domain>:<port>/default/plenary-conferencename
> > and so on, and all exhibit the same behavior.  It doesn't seem to
> > matter what path I put -- freeswitch accepts the connection, sends no
> > data, then disconnects after a while.  This leads me to suspect I
> > might just be getting the path name wrong.
> >
> > My questions, if anyone has experience with this:
> >
> > What is the correct path for the rtmp URL to connect to a video
> > conference
> > -- is it just the $destination_number, or something else?
> > Are there any obvious steps I'm missing to set up rtmp feeds, or any
> > suggestions for how to do smarter debugging of this?
> > Does anyone have an example project that successfully broadcasts RTMP
> > from a video conference to e.g. youtube?
> > Is there a better or more convenient approach to broadcasting a video
> > stream from a conference that you prefer to rtmp?
> >
> >
> > The full freeswitch config I'm using is here:
> > https://gitlab.com/cdetar/plenary-server/tree/master/ansible/roles/ple
> > nary/t
> > emplates/freeswitch
> > , if that's helpful.  (Those are templates for an ansible config, so
> > they contain variables that get interpolated in using {{var}} syntax).
> >
> > best,
> > Charlie
> >
> > [0] Glancing reference to youtube+rtmp:
> > https://freeswitch.org/confluence/display/FREESWITCH/FreeSWITCH+1.6+Vi
> > deo#Fr
> > eeSWITCH1.6Video-What%27snew
> >
> > [1] fs_cli debug info while attempting to connect via RTMP:
> >
> > 2016-09-13 23:37:40.551744 [NOTICE] mod_rtmp.c:903 New RTMP session
> > [1513874f-9084-470c-a2de-7e5f92bb2296]
> > 2016-09-13 23:37:40.551744 [INFO] rtmp_tcp.c:234 Rtmp connection from
> > 98.127.250.255:44131
> > 2016-09-13 23:37:40.551744 [DEBUG] rtmp.c:882 Sent handshake response
> > 2016-09-13 23:37:40.711748 [DEBUG] rtmp.c:907 Done with handshake
> > 2016-09-13 23:37:40.711748 [DEBUG] rtmp.c:1081 [chunk_stream=3
> > type=0x14
> > ts=0 stream_id=0x0] len=204
> > 2016-09-13 23:37:40.711748 [DEBUG] rtmp.c:192 [amfnumber=3] Got INVOKE
> > for connect
> > 2016-09-13 23:37:40.711748 [DEBUG] rtmp.c:656 [amfnumber=2 type=0x1
> > stream_id=0x0] len=4
> > 2016-09-13 23:37:40.711748 [DEBUG] rtmp.c:656 [amfnumber=2 type=0x5
> > stream_id=0x0] len=4
> > 2016-09-13 23:37:40.711748 [DEBUG] rtmp.c:656 [amfnumber=2 type=0x6
> > stream_id=0x0] len=5
> > 2016-09-13 23:37:40.711748 [DEBUG] rtmp.c:656 [amfnumber=2 type=0x4
> > stream_id=0x0] len=6
> > 2016-09-13 23:37:40.711748 [DEBUG] rtmp.c:656 [amfnumber=3 type=0x14
> > stream_id=0x0] len=201
> > 2016-09-13 23:37:40.711748 [DEBUG] rtmp.c:656 [amfnumber=3 type=0x14
> > stream_id=0x0] len=61
> > 2016-09-13 23:37:40.711748 [NOTICE] rtmp_sig.c:122 Sent connect reply
> > 2016-09-13 23:37:40.851748 [DEBUG] rtmp.c:1081 [chunk_stream=2
> > type=0x5
> > ts=0 stream_id=0x0] len=4
> > 2016-09-13 23:37:40.851748 [DEBUG] rtmp.c:1184 Set window size: from
> > 2097152 to 2097152 bytes
> > 2016-09-13 23:37:40.851748 [DEBUG] rtmp.c:1081 [chunk_stream=2
> > type=0x4
> > ts=0 stream_id=0x0] len=10
> > 2016-09-13 23:37:40.851748 [DEBUG] rtmp.c:91 Control (3): 00 00 00 00
> > 00
> > 00 01 2c
> > 2016-09-13 23:37:40.851748 [INFO] rtmp.c:118 stream=0 Client buffer
> > set to 300ms
> > 2016-09-13 23:37:40.851748 [DEBUG] rtmp.c:1081 [chunk_stream=3
> > type=0x14
> > ts=0 stream_id=0x0] len=25
> > 2016-09-13 23:37:40.851748 [DEBUG] rtmp.c:192 [amfnumber=3] Got INVOKE
> > for createStream
> > 2016-09-13 23:37:40.851748 [DEBUG] rtmp.c:656 [amfnumber=3 type=0x14
> > stream_id=0x0] len=29
> > 2016-09-13 23:37:40.851748 [INFO] rtmp_sig.c:137 Replied to
> > createStream
> > (0)
> > 2016-09-13 23:37:40.991748 [DEBUG] rtmp.c:1081 [chunk_stream=8
> > type=0x14
> > ts=0 stream_id=0x1] len=82
> > 2016-09-13 23:37:40.991748 [DEBUG] rtmp.c:192 [amfnumber=8] Got INVOKE
> > for play
> > 2016-09-13 23:37:40.991748 [DEBUG] rtmp_sig.c:198 Got play for
> > plenary-test-pattern-alpha at plenary-conference-profile on stream 1
> > 2016-09-13 23:37:40.991748 [DEBUG] rtmp.c:656 [amfnumber=2 type=0x1
> > stream_id=0x0] len=4
> > 2016-09-13 23:37:40.991748 [DEBUG] rtmp.c:656 [amfnumber=2 type=0x4
> > stream_id=0x0] len=6
> > 2016-09-13 23:37:40.991748 [DEBUG] rtmp.c:656 [amfnumber=2 type=0x4
> > stream_id=0x0] len=10
> > 2016-09-13 23:37:40.991748 [DEBUG] rtmp.c:656 [amfnumber=5 type=0x14
> > stream_id=0x1] len=135
> > 2016-09-13 23:37:40.991748 [DEBUG] rtmp.c:656 [amfnumber=5 type=0x14
> > stream_id=0x1] len=135
> > 2016-09-13 23:37:40.991748 [DEBUG] rtmp.c:656 [amfnumber=5 type=0x12
> > stream_id=0x1] len=44
> > 2016-09-13 23:37:40.991748 [DEBUG] rtmp.c:656 [amfnumber=5 type=0x12
> > stream_id=0x1] len=24
> > 2016-09-13 23:37:40.991748 [DEBUG] rtmp.c:1081 [chunk_stream=2
> > type=0x4
> > ts=0 stream_id=0x0] len=10
> > 2016-09-13 23:37:40.991748 [DEBUG] rtmp.c:91 Control (3): 00 00 00 01
> > 02
> > 25 51 00
> > 2016-09-13 23:37:40.991748 [INFO] rtmp.c:118 stream=1 Client buffer
> > set to 36000000ms
> > 2016-09-13 23:37:43.951733 [DEBUG] rtmp.c:1081 [chunk_stream=3
> > type=0x14
> > ts=0 stream_id=0x0] len=34
> > 2016-09-13 23:37:43.951733 [DEBUG] rtmp.c:192 [amfnumber=3] Got INVOKE
> > for deleteStream
> > 2016-09-13 23:37:43.951733 [NOTICE] rtmp.c:918 Disconnected from flash
> > client
> > 2016-09-13 23:37:43.951733 [DEBUG] rtmp_tcp.c:243 Closing socket
> > 2016-09-13 23:37:44.691705 [NOTICE] mod_rtmp.c:1025 RTMP session ended
> > [1513874f-9084-470c-a2de-7e5f92bb2296]
> >
> > ______________________________________________________________________
> > ___ Professional FreeSWITCH Consulting Services:
> > consulting at freeswitch.org
> > http://www.freeswitchsolutions.com
> >
> > Official FreeSWITCH Sites
> > http://www.freeswitch.org
> > http://confluence.freeswitch.org
> > http://www.cluecon.com
> >
> > FreeSWITCH-users mailing list
> > FreeSWITCH-users at lists.freeswitch.org
> > http://lists.freeswitch.org/mailman/listinfo/freeswitch-users
> > UNSUBSCRIBE:http://lists.freeswitch.org/mailman/options/freeswitch-use
> > rs
> > http://www.freeswitch.org
> >
> >
> > ______________________________________________________________________
> > ___ Professional FreeSWITCH Consulting Services:
> > consulting at freeswitch.org
> > http://www.freeswitchsolutions.com
> >
> > Official FreeSWITCH Sites
> > http://www.freeswitch.org
> > http://confluence.freeswitch.org
> > http://www.cluecon.com
> >
> > FreeSWITCH-users mailing list
> > FreeSWITCH-users at lists.freeswitch.org
> > http://lists.freeswitch.org/mailman/listinfo/freeswitch-users
> > UNSUBSCRIBE:http://lists.freeswitch.org/mailman/options/freeswitch-use
> > rs
> > http://www.freeswitch.org
>
> _________________________________________________________________________
> Professional FreeSWITCH Consulting Services:
> consulting at freeswitch.org
> http://www.freeswitchsolutions.com
>
> Official FreeSWITCH Sites
> http://www.freeswitch.org
> http://confluence.freeswitch.org
> http://www.cluecon.com
>
> FreeSWITCH-users mailing list
> FreeSWITCH-users at lists.freeswitch.org
> http://lists.freeswitch.org/mailman/listinfo/freeswitch-users
> UNSUBSCRIBE:http://lists.freeswitch.org/mailman/options/freeswitch-users
> http://www.freeswitch.org
>
>
> _________________________________________________________________________
> Professional FreeSWITCH Consulting Services:
> consulting at freeswitch.org
> http://www.freeswitchsolutions.com
>
> Official FreeSWITCH Sites
> http://www.freeswitch.org
> http://confluence.freeswitch.org
> http://www.cluecon.com
>
> FreeSWITCH-users mailing list
> FreeSWITCH-users at lists.freeswitch.org
> http://lists.freeswitch.org/mailman/listinfo/freeswitch-users
> UNSUBSCRIBE:http://lists.freeswitch.org/mailman/options/freeswitch-users
> http://www.freeswitch.org
>



-- 
Anthony Minessale II       ♬ @anthmfs  ♬ @FreeSWITCH  ♬

☞ http://freeswitch.org/http://cluecon.com/http://twitter.com/FreeSWITCH
☞ irc.freenode.net #freeswitch ☞ *http://freeswitch.org/g+
<http://freeswitch.org/g+>*

ClueCon Weekly Development Call
☎ sip:888 at conference.freeswitch.org  ☎ +19193869900

https://www.youtube.com/watch?v=9XXgW34t40s
https://www.youtube.com/watch?v=NLaDpGQuZDA
-------------- next part --------------
An HTML attachment was scrubbed...
URL: http://lists.freeswitch.org/pipermail/freeswitch-users/attachments/20160914/19a9eb45/attachment-0001.html 


Join us at ClueCon 2016 Aug 8-12, 2016
More information about the FreeSWITCH-users mailing list