[Freeswitch-users] Dial multiple users for "conference" call

[Michael Nielsen]

Sorry, I guess this is not specific conference specific.

I'll create a new topic :)

Thank you all for all your help.

On Wed, Jan 13, 2016 at 3:08 PM, Michael Nielsen <mic.niel84 at gmail.com>
wrote:

> However, my country_code variable is available before the loopback:
>
> 2016-01-13 14:08:43.143791 [INFO] mod_dptools.c:1692 country_code +44
>
> On Wed, Jan 13, 2016 at 1:57 PM, Michael Nielsen <mic.niel84 at gmail.com>
> wrote:
>
>> I can tell from the cli that the country_code variable is empty:
>>
>> Dialplan: loopback/293234-b Action set(dialed_number=${country_code}
>>  293234) INLINE
>>
>> EXECUTE loopback/293234-b set(dialed_number= 293234)
>>
>>
>> So my subscriber variables doesn't get used when using mod_conference...
>>
>> On Wed, Jan 13, 2016 at 1:54 PM, Michael Nielsen <mic.niel84 at gmail.com>
>> wrote:
>>
>>> Hi Bote,
>>>
>>> Thank you so much for all your detailed info. That helped a lot and
>>> solved almost everything.
>>>
>>> Final question... When I use the <action
>>> application="conference_set_auto_outcall" data="loopback/293234"/>, doesn't
>>> loopback means that it's try and dial 293234 from a matching dial plan
>>> already existing within my FreeSWITCH?
>>>
>>> The case is, that I've got a dial plan recognising expression="^(\d{3,20})$"
>>> etc.
>>> And if a number doesn't contain a valid country code I'll append it
>>> automatically according to the subscriber who initiate the calls.
>>> So my subscriber for example has a variable set country_code = +44. When
>>> I dial something it appends +44 if there is no country code.
>>>
>>> This works if I call something else than my conference dial plan, but
>>> when calling the conference dial plan and using loopback it doesn't work.
>>>
>>> Does it make sense and can you help?
>>>
>>> On Tue, Jan 12, 2016 at 6:44 PM, Bote Man <bote_radio at botecomm.com>
>>> wrote:
>>>
>>>> Michael, I make extensive use of the FreeSWITCH outbound conference
>>>> calling feature. I recently figured that I got the results that you (and I)
>>>> desire with these 2 lines in the dialplan of the extension that initiates
>>>> the outbound conference call:
>>>>
>>>>
>>>>
>>>> <action application="set"
>>>> data="conference_auto_outcall_caller_id_name=${caller_id_name}"/>
>>>>
>>>> <action application="set"
>>>> data="conference_auto_outcall_caller_id_number=${caller_id_number}"/>
>>>>
>>>>
>>>>
>>>> It’s not clear to me which of the many, many, many Caller*ID variables
>>>> are the best to use overall, but these are the ones that send the
>>>> originating extension number and name as FreeSWITCH knows them to the
>>>> dialed conferees. I find that effective_caller_id_number is not always
>>>> effective J
>>>>
>>>>
>>>>
>>>> Of course, you can set caller_id_* to effective_* or any other
>>>> assignments as needed; experimentation yields a lot of knowledge here. Use
>>>> the “log” application liberally in your conference dialplan extension to
>>>> display as many variables as you need to determine which holds the desired
>>>> values, that’s how I did it. A lot of them are empty, some are default,
>>>> nothing is set in stone so change and set them the way you see fit.
>>>>
>>>>
>>>>
>>>>
>>>>
>>>> Also, in answer to your previous query about the conferees still
>>>> ringing after the originator hangs up, add the “endconf” flag to your
>>>> conference kick-off string:
>>>>
>>>>
>>>>
>>>> <action application="conference" data="myconf at default
>>>> ++flags{endconf|moderator|nomoh}"/>
>>>>
>>>>
>>>>
>>>> myconf – the “name” of the conference as FreeSWITCH knows it, can be
>>>> pretty much anything readable, numbers, letters, literal value, variable
>>>> replacement, etc.
>>>>
>>>>
>>>>
>>>> default – the conference profile to use as configured in
>>>> autoload_configs/conference.conf.xml
>>>>
>>>>
>>>>
>>>> moderator flag – pulls in a different set of controls as specified in
>>>> the config file mentioned above.
>>>>
>>>>
>>>>
>>>> Hope this helps.
>>>>
>>>>
>>>>
>>>> Bote
>>>>
>>>>
>>>>
>>>>
>>>>
>>>> *From:* Michael Nielsen
>>>> *Sent:* Tuesday, 12 January, 2016 04:27
>>>> *Subject:* Re: [Freeswitch-users] Dial multiple users for "conference"
>>>> call
>>>>
>>>>
>>>>
>>>> Hi Larry,
>>>>
>>>>
>>>>
>>>> As you can see from my example, I am trying to set that exact variable:
>>>>
>>>> <action application="set"
>>>> data="conference_auto_outcall_caller_id_number=${effective_caller_id_number}"/>
>>>>
>>>> But I want to set it from the effective_caller_id_number, so I can get
>>>> the caller ID from the person who initiated the conference call.
>>>>
>>>>
>>>>
>>>> On Mon, Jan 11, 2016 at 7:50 PM, Larry Morley <
>>>> lmorley at neny.cslimits.net> wrote:
>>>>
>>>> Michael,
>>>>
>>>> Go back and have another look at the "mad boss" example. The variable
>>>> you likely want to set in this instance is
>>>> "conference_auto_outcall_caller_id_number".
>>>>
>>>> Basically, what Mike J was telling you is that not all variables are
>>>> salient; are set by FreeSwitch; have any meaning whatsoever; in the context
>>>> of certain parts of a given FreeSwitch configuration.
>>>>
>>>> From the "mad boss" example:
>>>>
>>>> <!--These params effect the outcalls made once you join-->
>>>>
>>>>         <action application="set"
>>>> data="conference_auto_outcall_caller_id_name=Mad Boss"/>
>>>>
>>>>         <action application="set"
>>>> data="conference_auto_outcall_caller_id_number=0911"/>
>>>>
>>>> Hope that helps,
>>>> Larry
>>>>
>>>> On Jan 11, 2016 9:02 AM, "Michael Nielsen" <mic.niel84 at gmail.com>
>>>> wrote:
>>>>
>>>> https://freeswitch.org/confluence/display/FREESWITCH/Channel+Variables
>>>>
>>>>
>>>>
>>>> On Mon, Jan 11, 2016 at 3:00 PM, Michael Nielsen <mic.niel84 at gmail.com>
>>>> wrote:
>>>>
>>>> In other dial plans I'm able to use ${effective_caller_id_number} from
>>>> my directory.
>>>>
>>>> That means, if my subscriber 1001 are calling I can use 1001 as caller
>>>> ID, so my called parties know who it is.
>>>>
>>>>
>>>>
>>>> On Mon, Jan 11, 2016 at 2:58 PM, Michael Jerris <mike at jerris.com>
>>>> wrote:
>>>>
>>>>
>>>>
>>>> On Monday, January 11, 2016, Michael Nielsen <mic.niel84 at gmail.com>
>>>> wrote:
>>>>
>>>> Seems as if it has nothing to do with multiple parties speaking
>>>> together, just simultaneously calling them.
>>>>
>>>>
>>>>
>>>> Back to mod_conferece and the madboss example. It seems to work, but
>>>> not getting the variable from the caller:
>>>>
>>>>
>>>>
>>>> 1) If I call some numbers, and hang up before the 60 seconds timeout -
>>>> the numbers keeps ringing for 60 seconds, even though I as initiator have
>>>> hung up.
>>>>
>>>> 2) <action application="set"
>>>> data="conference_auto_outcall_caller_id_number=${effective_caller_id_number}"/>
>>>> doesn't seems to be acknowledge, it shows Unknown number.
>>>>
>>>>
>>>>
>>>> What do you think effective_caller_id_number is here?  this is not a
>>>> variable that is automatically set
>>>>
>>>>
>>>>
>>>>
>>>> _________________________________________________________________________
>>>> Professional FreeSWITCH Consulting Services:
>>>> consulting at freeswitch.org
>>>> http://www.freeswitchsolutions.com
>>>>
>>>> Official FreeSWITCH Sites
>>>> http://www.freeswitch.org
>>>> http://confluence.freeswitch.org
>>>> http://www.cluecon.com
>>>>
>>>> FreeSWITCH-users mailing list
>>>> FreeSWITCH-users at lists.freeswitch.org
>>>> http://lists.freeswitch.org/mailman/listinfo/freeswitch-users
>>>> UNSUBSCRIBE:
>>>> http://lists.freeswitch.org/mailman/options/freeswitch-users
>>>> http://www.freeswitch.org
>>>>
>>>
>>>
>>
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: http://lists.freeswitch.org/pipermail/freeswitch-users/attachments/20160113/06d9d9c1/attachment.html