[Freeswitch-users] FreeSWITCH-users Digest, Vol 111, Issue 82

kaleem rehman k4kaleem at gmail.com
Tue Sep 8 13:46:20 MSD 2015


Hi Prashanth / Bob,

Avaya CM supports sip but this is mainly used for Aura VM, Experience
portal and SM and more of Avaya only devices, direct conenctions to
Asterisk , FS & 3CX work but I always experienced issues due to Avaya SIP
Limitations and also officially this is not supported
Best Route to do this is via session Manager as this is the supported
method.
First create a trunk link between Session manager and Freeswitch, then
register extension directly to SM and make calls between from this
extension and Freeswitch, once everything is working then create a trunk
between CM & SM, or use existing and setup digit routing on SM and CM.

if you have any issues setting up SM and its entities then let me know.
this way will be best and far most easy one.

thanks, kaleem

On Tue, Sep 8, 2015 at 9:54 AM, <
freeswitch-users-request at lists.freeswitch.org> wrote:

> Send FreeSWITCH-users mailing list submissions to
>         freeswitch-users at lists.freeswitch.org
>
> To subscribe or unsubscribe via the World Wide Web, visit
>         http://lists.freeswitch.org/mailman/listinfo/freeswitch-users
> or, via email, send a message with subject or body 'help' to
>         freeswitch-users-request at lists.freeswitch.org
>
> You can reach the person managing the list at
>         freeswitch-users-owner at lists.freeswitch.org
>
> When replying, please edit your Subject line so it is more specific
> than "Re: Contents of FreeSWITCH-users digest..."
>
> Today's Topics:
>
>    1. Re: OneWay audio after hold->unhold (Bote Man)
>    2. Re: Compiling under SmartOS (Stanislav Sinyagin)
>    3. Re: OneWay audio after hold->unhold (Prashanth Devarajappa)
>
>
> ---------- Forwarded message ----------
> From: Bote Man <bote_radio at botecomm.com>
> To: "'FreeSWITCH Users Help'" <freeswitch-users at lists.freeswitch.org>
> Cc:
> Date: Mon, 7 Sep 2015 18:03:17 -0400
> Subject: Re: [Freeswitch-users] OneWay audio after hold->unhold
>
> Actually, yes I need all of the settings on the Avaya side.
>
>
>
> I am not using encryption and I never could get the Avaya CS1000M to talk
> to the FreeSWITCH installation. I think the closest I could get was the
> signaling would allow the call to be answered, but I got no audio to pass
> either direction.
>
>
>
> I think the Avaya puts information in unexpected elements of the SIP
> message and I had no more time to troubleshoot it because it was not my
> primary task.
>
>
>
> There must be some small setting that I am missing and I would love to
> find the missing piece of the puzzle.
>
>
>
> Thanks!
>
>
>
> Bote
>
>
>
>
>
> *From:* Prashanth Devarajappa
> *Sent:* Monday, 07 September, 2015 09:47
> *Subject:* Re: [Freeswitch-users] OneWay audio after hold->unhold
>
>
>
> *Avaya PBX Version Control*
>
> §  Media encryption over IP:Y
>
> §  Session Manager Element Manager 6.3
>
> §  System Manager Release 6.3.5
>
> §  Communication System Management 6.3.10
>
>
>
> *In IP-Network-region :*
>
> §  Codec set matches group for encryption
>
> §  Intra-region IP-IP Direct Audio: yes
>
> §  Inter-region IP-IP Direct Audio: yes
>
>
>
> *In CM, signaling-group of type*: *SIP*
>
> §  Transport Method: TLS
>
>
>
> Let me know if you need further Avaya config details.
>
>
>
> *FreeSwitch :*
>
> Its standard FS with custom (code/config) changes to enable
>
>
>
> ·         Support for RFC 5939 : Capability Negotiation
>
> ·         Support for UNENCRYPTED_SRTCP
>
> ·         Support IP Shuffling with in ACK…… to be done J
>
>
>
>
>
> Prashanth
>
>
>
>
>
>
>
> *From:* Bote Man [mailto:bote_radio at botecomm.com <bote_radio at botecomm.com>]
>
> *Sent:* 05 September 2015 04:50
> *To:* FreeSWITCH Users Help <freeswitch-users at lists.freeswitch.org>
> *Subject:* Re: [Freeswitch-users] OneWay audio after hold->unhold
>
>
>
> We would be VERY appreciative if you could provide the configurations on
> the Avaya and FreeSWITCH that allow them to talk to each other. In my
> experience Avaya does not play well with others, and I have tried and given
> up.
>
> Thank you in advance!
>
> Bote
>
>
>
> On Fri, Sep 4, 2015 at 12:09 PM, Prashanth Devarajappa <
> Prashanth.Devarajappa at enghouse.com> wrote:
>
> Hello,
>
>
>
> I am connecting to Avaya switch using SIP trunk interface from FS with TLS
> & SRTP connection. This works well for inbound and outbound calls. I have
> an issue with media, when I try hold -> unhold operation from FS for an
> outbound call.
>
>
>
> When FS tries to unhold the call by sending Re-INVITE, avaya responds with
> 200 OK. Then sends INVITE w/o SDP to shuffle the media(IP Shuffling, to
> make media flow directly b/w endpoints). FS responds with 200 OK + SDP as
> expected. Now avaya sends ACK + SDP where SDP has the updated connection
> info(IP and port of endpoint) where media should be sent. Along with this
> it also changes the crypto master key as per RFC due to change in
> connection info(c=).
>
>
>
> On seeing this ACK, FS update the connection info(which is good) and
> change its own crypto master key in response. however this new master key
> is not sent to far end, meaning FS can decode the media it receives but
> other end can't decode the media FS is sending to it resulting in one way
> audio.
>
>
>
> Has anyone come across this issue ?
>
>
>
> Is there any way to trigger Re-INVITE or UPDATE from FS so other end gets
> new master key ?
>
>
>
>
>
> Regards
>
> Prashanth
>
>
>
>
> _________________________________________________________________________
> Professional FreeSWITCH Consulting Services:
> consulting at freeswitch.org
> http://www.freeswitchsolutions.com
>
> Official FreeSWITCH Sites
> http://www.freeswitch.org
> http://confluence.freeswitch.org
> http://www.cluecon.com
>
> FreeSWITCH-users mailing list
> FreeSWITCH-users at lists.freeswitch.org
> http://lists.freeswitch.org/mailman/listinfo/freeswitch-users
> UNSUBSCRIBE:http://lists.freeswitch.org/mailman/options/freeswitch-users
> http://www.freeswitch.org
>
>
>
>
> ---------- Forwarded message ----------
> From: Stanislav Sinyagin <ssinyagin at gmail.com>
> To: FreeSWITCH Users Help <freeswitch-users at lists.freeswitch.org>
> Cc:
> Date: Tue, 8 Sep 2015 08:55:37 +0200
> Subject: Re: [Freeswitch-users] Compiling under SmartOS
> See  the update at https://freeswitch.org/jira/browse/FS-7967
>
> I fixed the compilation problems, and now there's a runtime issue.
>
> On Mon, Aug 17, 2015 at 10:40 AM, Stanislav Sinyagin
> <ssinyagin at gmail.com> wrote:
> > I see there are some people on the list, working with SmartOS.
> >
> > The current master fails to compile:
> > https://freeswitch.org/jira/browse/FS-7967
> >
> > Your input will be appreciated.
> >
> > I just started looking around and getting the feeling what SmartOS is.
> > I worked with Solaris quite a lot, but that was almost 10 years ago.
>
>
>
>
> ---------- Forwarded message ----------
> From: Prashanth Devarajappa <Prashanth.Devarajappa at enghouse.com>
> To: FreeSWITCH Users Help <freeswitch-users at lists.freeswitch.org>
> Cc:
> Date: Tue, 8 Sep 2015 08:53:42 +0000
> Subject: Re: [Freeswitch-users] OneWay audio after hold->unhold
>
> Hi Bob,
>
>
>
> I am told that our Avaya is “avaya communication manager is the 8300”
>
>
>
> So far with our testing, we have not seen any issues related to transfer.
> (May be we have not done extensive transfer tests)
>
>
>
> Prashanth
>
>
>
>
>
> *From:* Bob Hartwig [mailto:bobjectsfreeswitch at gmail.com]
> *Sent:* 07 September 2015 17:42
> *To:* FreeSWITCH Users Help <freeswitch-users at lists.freeswitch.org>
> *Subject:* Re: [Freeswitch-users] OneWay audio after hold->unhold
>
>
>
> Is this an Avaya AS5300 by any chance?  Those have some serious interop
> issues when it comes to transfers.  I had to struggle mightily to get a
> client's product (not Freeswitch) to interoperate with it.  I'm really
> interested to hear if this gets resolved for Freeswitch.
>
>
>
>
>
>
>
> On Fri, Sep 4, 2015 at 11:09 AM, Prashanth Devarajappa <
> Prashanth.Devarajappa at enghouse.com> wrote:
>
> Hello,
>
>
>
> I am connecting to Avaya switch using SIP trunk interface from FS with TLS
> & SRTP connection. This works well for inbound and outbound calls. I have
> an issue with media, when I try hold -> unhold operation from FS for an
> outbound call.
>
>
>
> When FS tries to unhold the call by sending Re-INVITE, avaya responds with
> 200 OK. Then sends INVITE w/o SDP to shuffle the media(IP Shuffling, to
> make media flow directly b/w endpoints). FS responds with 200 OK + SDP as
> expected. Now avaya sends ACK + SDP where SDP has the updated connection
> info(IP and port of endpoint) where media should be sent. Along with this
> it also changes the crypto master key as per RFC due to change in
> connection info(c=).
>
>
>
> On seeing this ACK, FS update the connection info(which is good) and
> change its own crypto master key in response. however this new master key
> is not sent to far end, meaning FS can decode the media it receives but
> other end can't decode the media FS is sending to it resulting in one way
> audio.
>
>
>
> Has anyone come across this issue ?
>
>
>
> Is there any way to trigger Re-INVITE or UPDATE from FS so other end gets
> new master key ?
>
>
>
>
>
> Regards
>
> Prashanth
>
>
>
>
> _________________________________________________________________________
> Professional FreeSWITCH Consulting Services:
> consulting at freeswitch.org
> http://www.freeswitchsolutions.com
>
> Official FreeSWITCH Sites
> http://www.freeswitch.org
> http://confluence.freeswitch.org
> http://www.cluecon.com
>
> FreeSWITCH-users mailing list
> FreeSWITCH-users at lists.freeswitch.org
> http://lists.freeswitch.org/mailman/listinfo/freeswitch-users
> UNSUBSCRIBE:http://lists.freeswitch.org/mailman/options/freeswitch-users
> http://www.freeswitch.org
>
>
>
> _______________________________________________
> FreeSWITCH-users mailing list
> FreeSWITCH-users at lists.freeswitch.org
> http://lists.freeswitch.org/mailman/listinfo/freeswitch-users
> UNSUBSCRIBE:http://lists.freeswitch.org/mailman/options/freeswitch-users
> http://www.freeswitch.org
>
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: http://lists.freeswitch.org/pipermail/freeswitch-users/attachments/20150908/af11cec6/attachment-0001.html 


Join us at ClueCon 2016 Aug 8-12, 2016
More information about the FreeSWITCH-users mailing list