[Freeswitch-users] fs_cli will not connect on Fresh install on Debian

Tue Mar 10 14:04:54 MSK 2015

Are you sure it's trying to load mod_event_socket? Unless it loads that
module it won't listen on 8021.

If it is trying to, perhaps start freeswitch in the foreground (-c option)
and then (re)load the module once it's running. If there's an error that'll
hopefully show it up if it's not making it to the log file.

On 10 March 2015 at 09:24, Richard Mace <richard.mace at gmail.com> wrote:

> Nothing, by the looks of things
>
> root at FreeSWITCH:~# netstat -an | grep 8021
> root at FreeSWITCH:~#
>
> Thanks
>
>
> On 10 March 2015 at 09:07, Stanislav Sinyagin <ssinyagin at gmail.com> wrote:
>
>> Richard, what do you see in the output:
>>
>> netstat -an | grep 8021
>>
>>
>>
>> On Tue, Mar 10, 2015 at 10:06 AM, Stanislav Sinyagin
>> <ssinyagin at gmail.com> wrote:
>> > this is exactly what I saw on a system which had no IPv4 address on
>> > its ethernet ports. FreeSWITCH was just not listening to port 8021,
>> > without any errors in the log.
>> >
>> > On Tue, Mar 10, 2015 at 9:16 AM, Richard Mace <richard.mace at gmail.com>
>> wrote:
>> >> Hi Bote,
>> >> Tried this as well, on the local machine:
>> >>
>> >> root at FreeSWITCH:~# fs_cli 127.0.0.1
>> >> [ERROR] fs_cli.c:1565 main() Error Connecting [Socket Connection Error]
>> >>
>> >> root at FreeSWITCH:~# /etc/init.d/freeswitch status
>> >> [ ok ] freeswitch is running.
>> >>
>> >> Richard
>> >>
>> >>
>> >> On 10 March 2015 at 07:11, Bote Man <bote_radio at botecomm.com> wrote:
>> >>>
>> >>> You could explicitly direct fs_cli to a particular i.p. address
>> either on
>> >>> the command line or using a profile definition.
>> >>>
>> >>>
>> >>>
>> >>> Bote
>> >>>
>> >>>
>> >>>
>> >>>
>> >>>
>> >>> From: Richard Mace
>> >>> Sent: Tuesday, 10 March, 2015 02:20
>> >>> To: FreeSWITCH Users Help
>> >>> Subject: Re: [Freeswitch-users] fs_cli will not connect on Fresh
>> install
>> >>> on Debian
>> >>>
>> >>>
>> >>>
>> >>> Hi,
>> >>>
>> >>> Is there an fs_cli command that I can use that will get me round the
>> >>> current bug?
>> >>>
>> >>> Its strange as it's only happened within the last month, as I built a
>> >>> system recently that worked fine out of the box.
>> >>>
>> >>>
>> >>>
>> >>> Thanks
>> >>>
>> >>>
>> >>>
>> >>> Richard
>> >>>
>> >>>
>> >>>
>> >>> On 9 March 2015 at 10:37, Richard Mace <richard.mace at gmail.com>
>> wrote:
>> >>>
>> >>> Hi Brian,
>> >>>
>> >>> Removed the line, and rebooted, but still getting:
>> >>>
>> >>> root at FreeSWITCH:~# fs_cli
>> >>> [ERROR] fs_cli.c:1565 main() Error Connecting [Socket Connection
>> Error]
>> >>>
>> >>> Richard
>> >>>
>> >>>
>> >>>
>> >>> On 6 March 2015 at 20:42, Brian West <brian at freeswitch.org> wrote:
>> >>>
>> >>> remove
>> >>>
>> >>> ::1     localhost ip6-localhost ip6-loopback
>> >>>
>> >>>
>> >>>
>> >>> from /etc/hosts
>> >>>
>> >>>
>> >>>
>> >>> its a bug in debian.
>> >>>
>> >>>
>> >>>
>> >>> On Fri, Mar 6, 2015 at 3:33 PM, Richard Mace <richard.mace at gmail.com>
>> >>> wrote:
>> >>>
>> >>> Hi,
>> >>>
>> >>>
>> >>>
>> >>> Sorry, I should have clarified that this is running locally on the
>> machine
>> >>> running FreeSWITCH.
>> >>>
>> >>>
>> >>>
>> >>> Richard
>> >>>
>> >>>
>> >>>
>> >>> On 6 March 2015 at 20:02, Bote Man <bote_radio at botecomm.com> wrote:
>> >>>
>> >>> On a fresh FS installation fs_cli only connects to 127.0.01 localhost.
>> >>>
>> >>>
>> >>>
>> >>> To connect from a remote machine put a valid routable interface
>> address
>> >>> (although I have 0.0.0.0 in mine) in
>> >>>
>> >>> conf/autoload_configs/event_socket.conf.xml
>> >>>
>> >>>
>> >>>
>> >>> and change the password and maybe even the port depending on the
>> >>> crackability of your network.
>> >>>
>> >>>
>> >>>
>> >>> Then you’ll probably want to configure a profile configuration file
>> with
>> >>> tight permissions to avoid having to type the parameters on the
>> command line
>> >>> every time you start fs_cli.
>> >>>
>> >>>
>> >>>
>> >>> Check the ‘command-line Interface fs_cli’ Confluence page for all the
>> >>> details.
>> >>>
>> >>>
>> >>>
>> >>> Bote
>> >>>
>> >>>
>> >>>
>> >>>
>> >>>
>> >>> From: Richard Mace
>> >>> Sent: Friday, 06 March, 2015 14:34
>> >>> Subject: [Freeswitch-users] fs_cli will not connect on Fresh install
>> on
>> >>> Debian
>> >>>
>> >>>
>> >>>
>> >>> Hi All,
>> >>>
>> >>> I did a fresh install of both Debian and FreeSWITCH today, following
>> the
>> >>> article here:
>> >>>
>> >>> https://freeswitch.org/confluence/display/FREESWITCH/Debian
>> >>>
>> >>>
>> >>>
>> >>> However, after installation, fs_cli will not connect. Any ideas?
>> >>>
>> >>>
>> >>>
>> >>> Thanks
>> >>>
>> >>>
>> >>>
>> >>> Richard
>> >>>
>> >>>
>> >>>
>> >>>
>> >>>
>> >>>
>> >>>
>> _________________________________________________________________________
>> >>> Professional FreeSWITCH Consulting Services:
>> >>> consulting at freeswitch.org
>> >>> http://www.freeswitchsolutions.com
>> >>>
>> >>> Official FreeSWITCH Sites
>> >>> http://www.freeswitch.org
>> >>> http://confluence.freeswitch.org
>> >>> http://www.cluecon.com
>> >>>
>> >>> FreeSWITCH-users mailing list
>> >>> FreeSWITCH-users at lists.freeswitch.org
>> >>> http://lists.freeswitch.org/mailman/listinfo/freeswitch-users
>> >>> UNSUBSCRIBE:
>> http://lists.freeswitch.org/mailman/options/freeswitch-users
>> >>> http://www.freeswitch.org
>> >>
>> >>
>> >>
>> >>
>> _________________________________________________________________________
>> >> Professional FreeSWITCH Consulting Services:
>> >> consulting at freeswitch.org
>> >> http://www.freeswitchsolutions.com
>> >>
>> >> Official FreeSWITCH Sites
>> >> http://www.freeswitch.org
>> >> http://confluence.freeswitch.org
>> >> http://www.cluecon.com
>> >>
>> >> FreeSWITCH-users mailing list
>> >> FreeSWITCH-users at lists.freeswitch.org
>> >> http://lists.freeswitch.org/mailman/listinfo/freeswitch-users
>> >> UNSUBSCRIBE:
>> http://lists.freeswitch.org/mailman/options/freeswitch-users
>> >> http://www.freeswitch.org
>>
>> _________________________________________________________________________
>> Professional FreeSWITCH Consulting Services:
>> consulting at freeswitch.org
>> http://www.freeswitchsolutions.com
>>
>> Official FreeSWITCH Sites
>> http://www.freeswitch.org
>> http://confluence.freeswitch.org
>> http://www.cluecon.com
>>
>> FreeSWITCH-users mailing list
>> FreeSWITCH-users at lists.freeswitch.org
>> http://lists.freeswitch.org/mailman/listinfo/freeswitch-users
>> UNSUBSCRIBE:http://lists.freeswitch.org/mailman/options/freeswitch-users
>> http://www.freeswitch.org
>>
>
>
> _________________________________________________________________________
> Professional FreeSWITCH Consulting Services:
> consulting at freeswitch.org
> http://www.freeswitchsolutions.com
>
> Official FreeSWITCH Sites
> http://www.freeswitch.org
> http://confluence.freeswitch.org
> http://www.cluecon.com
>
> FreeSWITCH-users mailing list
> FreeSWITCH-users at lists.freeswitch.org
> http://lists.freeswitch.org/mailman/listinfo/freeswitch-users
> UNSUBSCRIBE:http://lists.freeswitch.org/mailman/options/freeswitch-users
> http://www.freeswitch.org
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: http://lists.freeswitch.org/pipermail/freeswitch-users/attachments/20150310/039acb46/attachment-0001.html 