[Freeswitch-users] PCMU codec issue (mismatch?) resulting in Incompatible Destination

Komar, Jason jkomar at jbox.ca
Sun Sep 7 03:48:45 MSD 2014


Thanks for the reply. Some of the sound sampling rates were not there, but
the issue still persists. I have done some more searching and came across a
thread on the mailing list from June that talks about a Raspberry Pi
compiler issue causing the codec mismatch issue. It didn't come up in the
search results until I searched Google for "pcmu 32000."

I will try updating gcc to 4.7 and see if that does the trick.

Thanks again,

Jason



On Sat, Sep 6, 2014 at 5:03 PM, Guillermo Ruiz Camauer <grcamauer at gmail.com>
wrote:

> I think that the 20 and 30 refer to 20ms or 30ms packetizing.  The 32000
> and 64000 are the sampling rates.  You probably need to install all of the
> sounds with:
>
> make cd-sounds-install cd-moh-install
>
> This will install the music and prompts in all the different sampling
> rates.
>
>
> Guillermo
>
>
>
> On Sat, Sep 6, 2014 at 7:22 PM, Komar, Jason <jkomar at jbox.ca> wrote:
>
>> Hi Everyone,
>>
>> I had a Raspberry Pi installation of the latest FreeSWITCH 1.2 branch
>> running on Gentoo. It was working great, but my SD card packed it in.
>>
>> I thought I would try something different, so I loaded up Raspbian and
>> installed FreeSWITCH via Fusionpbx script.
>>
>> I registered my Panasonic KX-TPA50 phone, but when doing a test call to
>> MoH or echo, I get an incompatible destination error. Looks like a codec
>> mismatch. Not sure what to look for though. I presume it's just a setting
>> somewhere.
>>
>> Both FreeSWITCH and the phone have PCMU, but something is different in
>> the comparison as can be seen here:
>>
>> [DEBUG] switch_core_media.c:3475 Audio Codec Compare
>> [PCMU:0:8000:30:32000:1]/[PCMU:0:8000:20:64000:1]
>>
>> I understand the 8000, but I don't know what the other mismatched numbers
>> are or where to look to change a setting to get them to match.
>>
>> The same mismatched numbers show when it compares G722 and PCMA.
>>
>> Hope someone can point me in the right direction.
>>
>> Thanks,
>> Jason
>>
>> _________________________________________________________________________
>> Professional FreeSWITCH Consulting Services:
>> consulting at freeswitch.org
>> http://www.freeswitchsolutions.com
>>
>> Official FreeSWITCH Sites
>> http://www.freeswitch.org
>> http://confluence.freeswitch.org
>> http://www.cluecon.com
>>
>> 
>> 
>>
>> FreeSWITCH-users mailing list
>> FreeSWITCH-users at lists.freeswitch.org
>> http://lists.freeswitch.org/mailman/listinfo/freeswitch-users
>> UNSUBSCRIBE:http://lists.freeswitch.org/mailman/options/freeswitch-users
>> http://www.freeswitch.org
>>
>
>
>
> --
> Guillermo Ruiz Camauer
>
> _________________________________________________________________________
> Professional FreeSWITCH Consulting Services:
> consulting at freeswitch.org
> http://www.freeswitchsolutions.com
>
> Official FreeSWITCH Sites
> http://www.freeswitch.org
> http://confluence.freeswitch.org
> http://www.cluecon.com
>
> 
> 
>
> FreeSWITCH-users mailing list
> FreeSWITCH-users at lists.freeswitch.org
> http://lists.freeswitch.org/mailman/listinfo/freeswitch-users
> UNSUBSCRIBE:http://lists.freeswitch.org/mailman/options/freeswitch-users
> http://www.freeswitch.org
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: http://lists.freeswitch.org/pipermail/freeswitch-users/attachments/20140906/7f6be431/attachment.html 


Join us at ClueCon 2016 Aug 8-12, 2016
More information about the FreeSWITCH-users mailing list