[Freeswitch-users] ISDN Module - ftmod_libpri

[Fred Schulz - privat]

Hi all,

i just try to setup an ISDN connection between a freeswitch and a cisco cue...

I am trying to load libpri with bri support. But it allways shows:

2014-07-21 15:14:56.233050 [ERR] ftmod_libpri.c:2952 Unsupported trunk type: 'BRI', libpri too old

Here are my configs:

Freetdm.conf

[general]
cpu_monitor => no
cpu_monitoring_interval => 2000 ; monitor usage every 2 seconds
cpu_set_alarm_threshold => 90 ; whenever 90% of global CPU usage is reached, trigger the alarm.
cpu_reset_alarm_threshold => 80 ; when the CPU usage decreases at 80%, clear the alarm.
cpu_alarm_action => reject,warn ; Start rejecting calls when the CPU alarm is triggered and also print warnings.

[span zt trunk1]
trunk_type => bri
b-channel => 1-2
d-channel => 3

[span zt trunk2]
trunk_type => bri
b-channel => 4-5
d-channel => 6

[span zt trunk3]
trunk_type => bri
b-channel => 7-8
d-channel => 9

[span zt trunk4]
trunk_type => bri
b-channel => 10-11
d-channel => 12

freetdm.conf.xml

<configuration name="freetdm.conf" description="FreeTDM Configuration">

        <settings>
                <param name="debug" value="1"/>
                <param name="sip-headers" value="true"/>
        </settings>

        <libpri_spans>
                <span name="trunk1">
                        <param name="node" value="cpe"/>
                        <param name="switch" value="euroisdn"/>
                        <param name="opts" value="omit_redirecting_number"/>
                        <param name="dp" value="unknown"/>
                        <param name="debug" value="none"/>
                        <param name="dialplan" value="xml"/>
                        <param name="context" value="public"/>
                </span>
                <span name="trunk2">
                        <param name="node" value="cpe"/>
                        <param name="switch" value="euroisdn"/>
                        <param name="opts" value="omit_redirecting_number"/>
                        <param name="dp" value="unknown"/>
                        <param name="debug" value="none"/>
                        <param name="dialplan" value="xml"/>
                        <param name="context" value="public"/>
                </span>
                <span name="trunk3">
                        <param name="node" value="cpe"/>
                        <param name="switch" value="euroisdn"/>
                        <param name="opts" value="omit_redirecting_number"/>
                        <param name="dp" value="unknown"/>
                        <param name="debug" value="none"/>
                        <param name="dialplan" value="xml"/>
                        <param name="context" value="public"/>
                </span>
                <span name="trunk4">
                        <param name="node" value="cpe"/>
                        <param name="switch" value="euroisdn"/>
                        <param name="opts" value="omit_redirecting_number"/>
                        <param name="dp" value="unknown"/>
                        <param name="debug" value="none"/>
                        <param name="dialplan" value="xml"/>
                        <param name="context" value="public"/>
                </span>
        </libpri_spans>
</configuration>

Tones.conf is default ...

Thank you for any help
-------------- next part --------------
An HTML attachment was scrubbed...
URL: http://lists.freeswitch.org/pipermail/freeswitch-users/attachments/20140721/770ab6f6/attachment-0001.html