[Freeswitch-users] 1.4/master openssl requirement change.

Anthony Minessale anthony.minessale at gmail.com
Wed Feb 5 19:41:54 MSK 2014 

Keep in mind when you do this that the openssl you install becomes a
dependency so the code is not portable without it so if you need to copy
the binaries to other systems you plan accordingly such as installing the
openssl into the same prefix as FS eg /usr/local/freeswitch




On Wed, Feb 5, 2014 at 9:04 AM, Lawrence Conroy <lconroy at insensate.co.uk>wrote:

> Hi Mike, folks,
>  Bingo! --shared is your friend.
> building "plain" openssl 101f with --shared
> --prefix=/usr/local/opt/openssl and then running fs build gets through
> configure without problems. Result.
> [now I only have to get mod_mp4 to work through make :]
> many thanks,
>   Lawrence
>
>
> On 5 Feb 2014, at 13:57, Michael Jerris wrote:
>
> > It looks like the issue on at least a few of these is that your manually
> rolled 101f installs are static only.  If you build those shared it should
> resolve the issue.  Please re-test and let me know.
> >
> > Thanks
> > Mike
> >
> > On Feb 5, 2014, at 8:30 AM, Anthony Minessale <
> anthony.minessale at gmail.com> wrote:
> >
> >> Remember your last config log where I asked you to add -ldl? Everything
> was right but the test for dtls failed cos it didn't add -ldl to the
> compile.  I suspect once you fix that it will work.  Look in the
> configure.in for that test and see if you can add -ldl to it.
> >>
> >> On Feb 5, 2014 1:55 AM, "Tamas Jalsovszky" <jalsot at gmail.com> wrote:
> >> Yes, that could be the issue.
> >> I'm playing on ubuntu 12.04 which has:
> >> ii  libssl0.9.8                            0.9.8o-7ubuntu3.1
>                         SSL shared libraries
> >> ii  libssl1.0.0                            1.0.1-4ubuntu5.11
>                         SSL shared libraries
> >> ii  libssl1.0.0:i386                       1.0.1-4ubuntu5.11
>                         SSL shared libraries
> >>
> >> /lib/x86_64-linux-gnu/libssl.so.0.9.8
> >> /lib/x86_64-linux-gnu/libssl.so.1.0.0
> >> /lib/i386-linux-gnu/libssl.so.1.0.0
> >>
> >> /home/tomi/freeswitch_master/openssl-1.0.1f/libssl.pc
> >> /home/tomi/freeswitch_master/openssl-1.0.1f/libssl.a
> >> /home/tomi/freeswitch_master/openssl101f/lib/pkgconfig/libssl.pc
> >> /home/tomi/freeswitch_master/openssl101f/lib/libssl.a
> >>
> >> /usr/lib/x86_64-linux-gnu/pkgconfig/libssl.pc
> >> /usr/lib/x86_64-linux-gnu/libssl.a
> >> /usr/lib/x86_64-linux-gnu/libssl.so
> >> /usr/lib/x86_64-linux-gnu/libssl.so.0.9.8
> >> /usr/lib/x86_64-linux-gnu/libssl3.so.1d
> >> /usr/lib/x86_64-linux-gnu/libssl3.so
> >>
> >> /lib/x86_64-linux-gnu/libcrypto.so.0.9.8
> >> /lib/x86_64-linux-gnu/libcrypto.so.1.0.0
> >> /lib/i386-linux-gnu/libcrypto.so.1.0.0
> >>
> >> /usr/lib/x86_64-linux-gnu/libcrypto.so
> >> /usr/lib/x86_64-linux-gnu/libcrypto.so.0.9.8
> >> /usr/lib/x86_64-linux-gnu/pkgconfig/libcrypto.pc
> >> /usr/lib/x86_64-linux-gnu/libcrypto.a
> >>
> >> /home/tomi/freeswitch_master/openssl-1.0.1f/include/openssl/ssl.h
> >> /home/tomi/freeswitch_master/openssl101f/include/openssl/ssl.h
> >> /usr/include/openssl/ssl.h
> >>
> >>
> >>
> >> On Wed, Feb 5, 2014 at 12:54 AM, Michael Jerris <mike at jerris.com>
> wrote:
> >> it sounds to me like its finding a system version before the other one.
>  can you let me know the other locations on your box where the following
> files are
> >>
> >> libssl.*
> >> libcrypto.*
> >> openssl/ssl.h
> >>
> >> also what is in your config.log comparable to the settings below from
> mine system
> >>
> >> configure:23191: checking for openssl
> >> configure:23195: result: yes
> >> configure:23199: checking openssl_CFLAGS
> >> configure:23202: result:
> >> configure:23205: checking openssl_LIBS
> >> configure:23208: result: -lssl -lcrypto -lz
> >> configure:23408: checking for SSL_CTX_set_tlsext_use_srtp in -lssl
> >> configure:23442: result: yes
> >> configure:23454: checking for DTLSv1_method in -lssl
> >> configure:23488: result: yes
> >>
> >>
> >> On Feb 4, 2014, at 6:26 PM, Lawrence Conroy <lconroy at insensate.co.uk>
> wrote:
> >>
> >>> Hi There,
> >>> I suspect me too.
> >>>
> >>> OS X Snow Leopard (to remove any residual Mavericks questions) on a
> C2D MBP.
> >>> NB: I need openssl 101f only because of the new fS requirement so have
> left the existing system openssl gubbins in /usr/{bin, include,...} &
> intended to build 101f "off the beaten track" just for fS. I have no
> interest in webRTC and its webby tree-hugginess, but if 101f's a
> requirement ... onwards and upwards.
> >>>
> >>> Steps:
> >>> grabbed fresh fS master as of a few hours ago.
> >>> grabbed openssl101f. built openssl to put its stuff in
> /usr/local/opt/openssl (i.e., /usr/local/opt/openssl/bin,
> /usr/local/opt/openssl/lib, /usr/local/opt/openssl/include/openssl).
> >>>
> >>> in fS, bootstrap.sh, then .configure
> >>> configure reports it's added "-I/usr/local/opt/openssl/include" and
> "-L/usr/local/opt/openssl/lib".
> >>>
> >>> However, same complaint:
> >>> checking for SSL_CTX_set_tlsext_use_srtp in -lssl... no
> >>> configure: error: OpenSSL >= 1.0.1e and associaed developement headers
> required
> >>>
> >>> -------------
> >>> config.log sez (amongst loads else):
> >>> configure:23411: checking for SSL_CTX_set_tlsext_use_srtp in -lssl
> >>> configure:23436: gcc -o conftest -g -O2 -pipe -no-cpp-precomp
> -I/usr/local/opt/openssl/include  -pipe -bind_at_load
> -L/usr/local/opt/openssl/lib conftest.c -lssl  -lssl -lcrypto -lz
> -lncurses -ljpeg  >&5
> >>> Undefined symbols:
> >>> "_SSL_CTX_set_tlsext_use_srtp", referenced from:
> >>>     _main in cc81KfHG.o
> >>> ld: symbol(s) not found
> >>> collect2: ld returned 1 exit status
> >>> -------------
> >>>
> >>> So ... openssl 101f DID put its stuff in /usr/local/opt/openssl, fS
> appears to have added the -I and -L to look there, but no joy.
> >>>
> >>> Hence, I *think* this is the same issue. Ideas?
> >>>
> >>> all the best,
> >>> Lawrence
> >>>
> >>>
> >>> On 4 Feb 2014, at 19:20, Anthony Minessale wrote:
> >>>> You may need to put the variable declarations first and all the
> command
> >>>> line switches such as --prefix last.
> >>>>
> >>>>
> >>>>
> >>>> On Tue, Feb 4, 2014 at 1:09 PM, Tamas Jalsovszky <jalsot at gmail.com>
> wrote:
> >>>>
> >>>>> Hello,
> >>>>>
> >>>>> I tried this: ./configure --prefix=/opt/freeswitch --enable-sse
> >>>>> CFLAGS="-I/opt/freeswitch/openssl101f/include"
> >>>>> LDFLAGS="-L/opt/freeswitch/openssl101f/lib"
> >>>>> Previously I compiled openssl as it is documented in the wiki and in
> this
> >>>>> thread.
> >>>>> Unfortunately I got:
> >>>>> checking for openssl... yes
> >>>>> checking openssl_CFLAGS...
> >>>>> checking openssl_LIBS... -lssl -lcrypto
> >>>>> adding "-DHAVE_OPENSSL" to SWITCH_AM_CFLAGS
> >>>>> checking for SSL_CTX_set_tlsext_use_srtp in -lssl... yes
> >>>>> checking for DTLSv1_method in -lssl... no
> >>>>>
> >>>>> configure: error: OpenSSL >= 1.0.1e and associaed developement
> headers
> >>>>> required
> >>>>>
> >>>>> FS git master (5228e02b19ea3d952d0c476e5aa0f1173b2083e4), Ubuntu
> 12.04 LTS.
> >>>>>
> >>>>> Is there other trick to build FS master with openssl from source
> code?
> >>>>>
> >>>>> Regards,
> >>>>> T.
> >
> > _________________________________________________________________________
> > Professional FreeSWITCH Consulting Services:
> > consulting at freeswitch.org
> > http://www.freeswitchsolutions.com
> >
> > 
> > 
> >
> > Official FreeSWITCH Sites
> > http://www.freeswitch.org
> > http://wiki.freeswitch.org
> > http://www.cluecon.com
> >
> > FreeSWITCH-users mailing list
> > FreeSWITCH-users at lists.freeswitch.org
> > http://lists.freeswitch.org/mailman/listinfo/freeswitch-users
> > UNSUBSCRIBE:http://lists.freeswitch.org/mailman/options/freeswitch-users
> > http://www.freeswitch.org
>
>
> _________________________________________________________________________
> Professional FreeSWITCH Consulting Services:
> consulting at freeswitch.org
> http://www.freeswitchsolutions.com
>
> 
> 
>
> Official FreeSWITCH Sites
> http://www.freeswitch.org
> http://wiki.freeswitch.org
> http://www.cluecon.com
>
> FreeSWITCH-users mailing list
> FreeSWITCH-users at lists.freeswitch.org
> http://lists.freeswitch.org/mailman/listinfo/freeswitch-users
> UNSUBSCRIBE:http://lists.freeswitch.org/mailman/options/freeswitch-users
> http://www.freeswitch.org
>



-- 
Anthony Minessale II       ♬ @anthmfs  ♬ @FreeSWITCH  ♬

☞ http://freeswitch.org/  ☞ http://cluecon.com/  ☞
http://twitter.com/FreeSWITCH
☞ irc.freenode.net #freeswitch ☞ *http://freeswitch.org/g+
<http://freeswitch.org/g+>*

ClueCon Weekly Development Call
☎ sip:888 at conference.freeswitch.org  ☎ +19193869900
-------------- next part --------------
An HTML attachment was scrubbed...
URL: http://lists.freeswitch.org/pipermail/freeswitch-users/attachments/20140205/7dee48c5/attachment.html

Join us at ClueCon 2013 Aug 6-8, 2013
More information about the FreeSWITCH-users mailing list