[Freeswitch-users] Audio delays from conferences under heavy CPU load on Windows

[Anthony Minessale]

Also, what if you cross connect the conferences with sip channels instead
of loopback?

200 or 300 channels causing that much cpu usage may indicate an
underpowered box.
On Feb 4, 2014 7:16 AM, "Michael Jerris" <mike at jerris.com> wrote:

> There is nothing at all in freeswitch with a buffer big enough to account
> for those massive delays, so a timer issue would not explain this issue.
>  Could it be possible that your nic driver is actually holding packets that
> long.  How does the pcap look as far as that delay, try local pcap and
> remote and compare.  What type of nic is it?
>
> Mike
>
> On Feb 4, 2014, at 5:08 AM, Markus von Arx <mkvonarx at gmail.com> wrote:
>
> Hi
>
> I've got a nasty problem with FreeSwitch conferences: after some time, I
> observe that audio that goes through FreeSwitch conferences gets more and
> more delayed (by the FreeSwitch conferences). Sometimes it's only 2
> seconds, but I have also observerd audio delays up to 5:30 minutes. Audio
> is never missing, only delayed, and even transmitted correctly after many
> minutes of delays.
>
> More details:
> - FreeSwitch 1.2.17, 64bit
> - OS: Windows Server 2012 64bit and Windows 7 64bit (observed on both
> platforms)
> - audio codec: G.711 alaw only
> - external channels: only SIP channels (mod_sofia), RTP with 20ms packets,
> G.711 alaw, all SIP endpoints in the local LAN on the same Ethernet switch.
> - dialplan: very very simple; only two actions: answer and connect every
> incoming/outgoing SIP channel directly to its private conference
> (mod_conference); and I set and export the following variables on all
> channels: rtp_disable_vad_in=true, rtp_disable_vad_out=true,
> send_silence_when_idle=-1, bridge_generate_comfort_noise=-1,
> suppress_cng=true
> - my own application: does some logic over mod_event_socket (on
> localhost); basically connects/disconnects these conferences using loopback
> channels (mod_loopback)
>  -> simple example: two SIP channels from SIP users 1001 and 1002,
> dialplan creates two conferences 1001c and 1002c, my application connectes
> 1001c and 1002c with a loopback channel, audio from SIP user 1001 travels
> through SIP channel to FreeSwitch conference 1001c, then through loopback
> channel to conference 1002c, then through SIP channel to SIP user 1002. The
> audio delay I'm talking about is that what user 1001 speaks into his phone
> arrives at user 1002 N seconds later instead of almost immediately.
> - mod_conference config: rate=8000, interval=20, max-members=99,
> energy-level=0, *-sound="", comfort-noise=0, conference-flags=audio-always
> - mod_sofia: rtp-timer-name=soft, suppress-cng=true, vad=none
> - timer: soft timer (no other available on Windows)
>
> Usage scenarios:
> - failing scenario 1 (low load): 34 SIP channels, 34 conferences, 97
> loopback channels, 228 FreeSwitch channel objects (34 + 2*97)
>  -> ~24% CPU load
> -> audio delays only sometimes, a bit unpredictable, mostly none, but
> sometimes in the region of 2-3 seconds
> - failing scenario 2 (medium load): ...
> -> ~51% CPU load
>  -> audio delays start slowly, in the region of 2-10 seconds, grow slowly
> with time while keeping channels and conferences alive
> - failing scenario 3 (high load): 66 SIP channels, 66 conferences, 385
> loopback channels, 836 FreeSwitch channel objects (66 + 2*385)
>  -> ~74% CPU load
> -> audio delays start almost immediately: 18 seconds delay after 15
> minutes, 41 seconds delay after 3 hours, 5:30 minutes delay after 19 hours.
>
> => My guess: it could be that under heavy CPU load, the (soft) timers that
> are responsible for the RTP audio streams don't get fired reliably anymore
> but sometimes (often) too late.Theoretically this should not cause an ever
> increasing delay, as the next timer event after the delayed one should be
> queued a bit earlier. But still somehow the delay happens and it looks like the
> mixed RTP packets from the conferences are sent later and later and the
> delay is never recovered.
>
> => Any ideas? Is this a known issue? Maybe some combination of Windows,
> soft timers, high CPU load, loopback channels, disabled CNG/VAD, long
> running conferences? Maybe a FreeSwitch (timer) bug? Any help would be
> appreciated!
>
> Thanks and best regards,
> Markus
>
>
>
> _________________________________________________________________________
> Professional FreeSWITCH Consulting Services:
> consulting at freeswitch.org
> http://www.freeswitchsolutions.com
>
> 
> 
>
> Official FreeSWITCH Sites
> http://www.freeswitch.org
> http://wiki.freeswitch.org
> http://www.cluecon.com
>
> FreeSWITCH-users mailing list
> FreeSWITCH-users at lists.freeswitch.org
> http://lists.freeswitch.org/mailman/listinfo/freeswitch-users
> UNSUBSCRIBE:http://lists.freeswitch.org/mailman/options/freeswitch-users
> http://www.freeswitch.org
>
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: http://lists.freeswitch.org/pipermail/freeswitch-users/attachments/20140204/b8dd620f/attachment-0001.html