[Freeswitch-users] Sangoma Transcoding Card Implementation

Gopalakrishnan N gopalakrishnan.an at gmail.com
Tue Apr 1 18:50:13 MSD 2014


Yes Jay, my vars.xml is like this,

 <X-PRE-PROCESS cmd="set"
data="global_codec_prefs=G729,G722,PCMU,PCMA,GSM"/>
  <X-PRE-PROCESS cmd="set"
data="outbound_codec_prefs=G729,PCMU,PCMA,GSM,G722"/>

Thanks.


On Tue, Apr 1, 2014 at 4:01 AM, jay binks <jaybinks at gmail.com> wrote:

> have you fixed your codec lists , as per my previous email ??
>
> use this :
>   <X-PRE-PROCESS cmd="set"
> data="global_codec_prefs=G729,G722,PCMU,PCMA,GSM"/>
>   <X-PRE-PROCESS cmd="set" data="outbound_codec_prefs=
> G729,PCMU,PCMA,GSM,G722"/>
>
>
>
> On 1 April 2014 00:57, Gopalakrishnan N <gopalakrishnan.an at gmail.com>wrote:
>
>> My log is here - http://pastebin.freeswitch.org/22265
>>
>> And my sangoma codec is loaded. As I told from ulaw if i call, its goes
>> to voicemessage, eventhough the extension is available and it uses sangoma
>> card.
>>
>> And yes my RTP Address shows as,
>>
>> freeswitch at internal>  sangoma_codec settings
>>         RTP IP Address: 192.168.2.1
>>
>> Its different segment from my inbuilt Ethernet address.
>>
>>
>> Regards.
>>
>>
>> On Mon, Mar 31, 2014 at 7:51 PM, Deon Vermeulen <vermeulen.deon at gmail.com
>> > wrote:
>>
>>> Hmm....
>>>
>>>
>>> Can you confirm this:
>>>
>>> /usr/local/freeswitch/conf/autoload_configs/modules.conf.xml
>>>
>>>     <!-- Endpoints -->
>>>     <!-- <load module="mod_dingaling"/> -->
>>>     <!-- <load module="mod_portaudio"/> -->
>>>     <!-- <load module="mod_alsa"/> -->
>>>     <load module="mod_sofia"/>
>>>     <load module="mod_sangoma_codec"/>
>>>     <load module="mod_loopback"/>
>>>     <!-- <load module="mod_woomera"/> -->
>>>     <!-- <load module="mod_freetdm"/> -->
>>>     <!-- <load module="mod_openzap"/> -->
>>>     <!-- <load module="mod_unicall"/> -->
>>>     <!-- <load module="mod_skinny"/> -->
>>>     <!-- <load module="mod_khomp"/>   -->
>>>     <!-- <load module="mod_rtmp"/>   -->
>>>
>>>     <!-- Codec Interfaces -->
>>>     <load module="mod_spandsp"/>
>>>     <!-- <load module="mod_g723_1"/> -->
>>>     <!-- <load module="mod_g729"/> -->
>>>     <!-- <load module="mod_amr"/> -->
>>>     <!-- <load module="mod_ilbc"/ > -->
>>>     <!-- <load module="mod_speex"/> -->
>>>     <!-- <load module="mod_h26x"/> -->
>>>     <!-- <load module="mod_vp8"/> -->
>>>     <!-- <load module="mod_b64"/> -->
>>>     <!-- <load module="mod_siren"/> -->
>>>     <!-- <load module="mod_isac"/> -->
>>>     <!-- <load module="mod_celt"/> -->
>>>     <!-- <load module="mod_opus"/> -->
>>>
>>>
>>> Although I think this is something else.
>>>
>>> Please paste call output from fs_cli to pastebin.com and share with us
>>> the link.
>>>
>>>
>>> Regards
>>> D
>>>
>>>
>>>
>>> On Mar 31, 2014, at 4:13 PM, Gopalakrishnan N <
>>> gopalakrishnan.an at gmail.com> wrote:
>>>
>>> @Deon: nope, I tried but it didn't push through.
>>>
>>> As I said from G729 if i initiate a call it says 488 Unacceptable error.
>>>
>>> From ulaw if i initiate the call, its going to voicemail even though the
>>> extension is available.
>>>
>>>
>>>
>>> While going to voicemail it uses sangoma,
>>> freeswitch at internal> sangoma_codec sessions
>>> Session    Codec      Enc        Dec        Enc Tx     Enc Rx     Dec Tx
>>>     Dec Rx     Enc Lost   Dec Lost   Enc AvgRxMs     Dec AvgRxMs
>>> 5          PCMU       Yes        No         149        146        0
>>>      0          129        0          80              0
>>> 4          PCMU       No         No         0          0          0
>>>      0          0          0          0               0
>>> 3          PCMU       No         No         0          0          0
>>>      0          0          0          0               0
>>> 2          PCMU       No         No         0          0          0
>>>      0          0          0          0               0
>>> 1          PCMU       No         No         0          0          0
>>>      0          0          0          0               0
>>> 0          PCMU       No         No         0          0          0
>>>      0          0          0          0               0
>>> Total sessions: 6
>>>
>>>
>>> very strange.
>>>
>>>
>>>
>>>
>>> On Mon, Mar 31, 2014 at 7:38 PM, Gopalakrishnan N <
>>> gopalakrishnan.an at gmail.com> wrote:
>>>
>>>> @Guillermo: Yes I have my sngtc_server loaded.
>>>>
>>>> @Deon, Let me try as per your dialplan.
>>>>
>>>>
>>>> On Mon, Mar 31, 2014 at 7:33 PM, Deon Vermeulen <
>>>> vermeulen.deon at gmail.com> wrote:
>>>>
>>>>> This is how we have it setup:
>>>>>
>>>>> /usr/local/freeswitch/conf/vars.xml
>>>>>
>>>>>   <X-PRE-PROCESS cmd="set" data="global_codec_prefs=Sangoma
>>>>> G729,G722,PCMU,PCMA,GSM"/>
>>>>>   <X-PRE-PROCESS cmd="set" data="outbound_codec_prefs=Sangoma
>>>>> G729,PCMU,PCMA,GSM,G722"/>
>>>>>
>>>>>
>>>>> AND
>>>>>
>>>>>
>>>>> /usr/local/freeswitch/conf/autoload_configs/sangoma_codec.conf.xml
>>>>>
>>>>> <configuration name="sangoma_codec.conf" description="Sangoma Codec
>>>>> Configuration">
>>>>>
>>>>>         <settings>
>>>>>                 <!-- Please check
>>>>> http://wiki.sangoma.com/sangoma-media-transcoding for documentation
>>>>> on the supported options -->
>>>>>                 <param name="register" value="g729,pcma,pcmu,gsm"/>
>>>>>         </settings>
>>>>>
>>>>> </configuration>
>>>>>
>>>>>
>>>>>
>>>>> On Mar 31, 2014, at 3:11 PM, Gopalakrishnan N <
>>>>> gopalakrishnan.an at gmail.com> wrote:
>>>>>
>>>>> > I have a Sangoma Transcoding Card installed in FreeSWITCH.
>>>>> >
>>>>> > And my configuration is fine, and my vars.xml file I have like this,
>>>>> >
>>>>> >  <X-PRE-PROCESS cmd="set" data="global_codec_prefs=Sangoma
>>>>> G729,G722,PCMU,PCMA,GSM"/>
>>>>> >   <X-PRE-PROCESS cmd="set" data="outbound_codec_prefs=Sangoma
>>>>> G729,PCMU,PCMA,GSM"/>
>>>>> >
>>>>> >
>>>>> > Now in one end I have ulaw and alaw and in other end I have G729,
>>>>> when I try to dial from G729 to other end I get 488 error (Codec error).
>>>>> >
>>>>> > Even though I have Sangoma Transcoding card still it shows error.
>>>>> >
>>>>> >
>>>>> > Thanks.
>>>>> >
>>>>> _________________________________________________________________________
>>>>> > Professional FreeSWITCH Consulting Services:
>>>>> > consulting at freeswitch.org
>>>>> > http://www.freeswitchsolutions.com
>>>>> >
>>>>> > 
>>>>> > 
>>>>> >
>>>>> > Official FreeSWITCH Sites
>>>>> > http://www.freeswitch.org
>>>>> > http://wiki.freeswitch.org
>>>>> > http://www.cluecon.com
>>>>> >
>>>>> > FreeSWITCH-users mailing list
>>>>> > FreeSWITCH-users at lists.freeswitch.org
>>>>> > http://lists.freeswitch.org/mailman/listinfo/freeswitch-users
>>>>> > UNSUBSCRIBE:
>>>>> http://lists.freeswitch.org/mailman/options/freeswitch-users
>>>>> > http://www.freeswitch.org
>>>>>
>>>>>
>>>>>
>>>>> _________________________________________________________________________
>>>>> Professional FreeSWITCH Consulting Services:
>>>>> consulting at freeswitch.org
>>>>> http://www.freeswitchsolutions.com
>>>>>
>>>>> 
>>>>> 
>>>>>
>>>>> Official FreeSWITCH Sites
>>>>> http://www.freeswitch.org
>>>>> http://wiki.freeswitch.org
>>>>> http://www.cluecon.com
>>>>>
>>>>> FreeSWITCH-users mailing list
>>>>> FreeSWITCH-users at lists.freeswitch.org
>>>>> http://lists.freeswitch.org/mailman/listinfo/freeswitch-users
>>>>> UNSUBSCRIBE:
>>>>> http://lists.freeswitch.org/mailman/options/freeswitch-users
>>>>> http://www.freeswitch.org
>>>>>
>>>>
>>>>
>>> _________________________________________________________________________
>>> Professional FreeSWITCH Consulting Services:
>>> consulting at freeswitch.org
>>> http://www.freeswitchsolutions.com
>>>
>>> 
>>> 
>>>
>>> Official FreeSWITCH Sites
>>> http://www.freeswitch.org
>>> http://wiki.freeswitch.org
>>> http://www.cluecon.com
>>>
>>> FreeSWITCH-users mailing list
>>> FreeSWITCH-users at lists.freeswitch.org
>>> http://lists.freeswitch.org/mailman/listinfo/freeswitch-users
>>> UNSUBSCRIBE:http://lists.freeswitch.org/mailman/options/freeswitch-users
>>> http://www.freeswitch.org
>>>
>>>
>>>
>>> _________________________________________________________________________
>>> Professional FreeSWITCH Consulting Services:
>>> consulting at freeswitch.org
>>> http://www.freeswitchsolutions.com
>>>
>>> 
>>> 
>>>
>>> Official FreeSWITCH Sites
>>> http://www.freeswitch.org
>>> http://wiki.freeswitch.org
>>> http://www.cluecon.com
>>>
>>> FreeSWITCH-users mailing list
>>> FreeSWITCH-users at lists.freeswitch.org
>>> http://lists.freeswitch.org/mailman/listinfo/freeswitch-users
>>> UNSUBSCRIBE:http://lists.freeswitch.org/mailman/options/freeswitch-users
>>> http://www.freeswitch.org
>>>
>>>
>>
>> _________________________________________________________________________
>> Professional FreeSWITCH Consulting Services:
>> consulting at freeswitch.org
>> http://www.freeswitchsolutions.com
>>
>> 
>> 
>>
>> Official FreeSWITCH Sites
>> http://www.freeswitch.org
>> http://wiki.freeswitch.org
>> http://www.cluecon.com
>>
>> FreeSWITCH-users mailing list
>> FreeSWITCH-users at lists.freeswitch.org
>> http://lists.freeswitch.org/mailman/listinfo/freeswitch-users
>> UNSUBSCRIBE:http://lists.freeswitch.org/mailman/options/freeswitch-users
>> http://www.freeswitch.org
>>
>>
>
>
> --
> Sincerely
>
> Jay
>
> _________________________________________________________________________
> Professional FreeSWITCH Consulting Services:
> consulting at freeswitch.org
> http://www.freeswitchsolutions.com
>
> 
> 
>
> Official FreeSWITCH Sites
> http://www.freeswitch.org
> http://wiki.freeswitch.org
> http://www.cluecon.com
>
> FreeSWITCH-users mailing list
> FreeSWITCH-users at lists.freeswitch.org
> http://lists.freeswitch.org/mailman/listinfo/freeswitch-users
> UNSUBSCRIBE:http://lists.freeswitch.org/mailman/options/freeswitch-users
> http://www.freeswitch.org
>
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: http://lists.freeswitch.org/pipermail/freeswitch-users/attachments/20140401/473b47f0/attachment-0001.html 


Join us at ClueCon 2013 Aug 6-8, 2013
More information about the FreeSWITCH-users mailing list