[Freeswitch-users] unable to send fax using txfax on LAN

arun sethi asethi168 at gmail.com
Fri Jul 5 09:38:21 MSD 2013


The version of freeswitch is 1.2 stable

FreeSWITCH Version 1.2.11+git~20130704T172759Z~667a8d8868 (git 667a8d8
2013-07-04 17:27:59Z)



On Thu, Jul 4, 2013 at 10:33 PM, arun sethi <asethi168 at gmail.com> wrote:

> I am trying to send fax to a local fax machine (Canon MX 512) on my LAN
> using freeswitch. The machine is connected via linksys pap2 (ATA) on LAN to
> freeswitch.
>
> the command I am using on freeswitch console is:
> /usr/local/freeswitch/bin/fs_cli -x  "originate
> {fax_verbose=true,ignore_early_media=true,absolute_codec_string='PCMU'}user/1006
> &txfax(/tmp/txfax.tiff)"
>
> The machine in question is Canon Mx 512 in fax only mode. Note that I am
> able to send out fax from this machine and receive it in freeswitch using
> rxfax. The problem is only in sending fax to this machine using txfax.
>
> The complete error log is at paste http://pastebin.freeswitch.org/21151
> Here are some relevant snippets from error log
>
> 2013-07-04 21:23:09.215751 [DEBUG] mod_sofia.c:243 sofia/internal/
> sip:1006 at 10.2.2.159:8081 SOFIA EXECUTE
> 2013-07-04 21:23:09.215751 [DEBUG] switch_core_state_machine.c:209
> sofia/internal/sip:1006 at 10.2.2.159:8081 Standard EXECUTE
> EXECUTE sofia/internal/sip:1006 at 10.2.2.159:8081 txfax(/tmp/txfax.tiff)
> 2013-07-04 21:23:09.215751 [DEBUG] mod_spandsp_fax.c:1387 Raw read codec
> activation Success L16 30000
> 2013-07-04 21:23:09.215751 [DEBUG] switch_core_codec.c:219 sofia/internal/
> sip:1006 at 10.2.2.159:8081 Push codec L16:70
> 2013-07-04 21:23:09.215751 [DEBUG] mod_spandsp_fax.c:1403 Raw write codec
> activation Success L16
> 2013-07-04 21:23:09.265748 [DEBUG] switch_rtp.c:3706 Correct ip/port
> confirmed.
> 2013-07-04 21:23:09.265748 [DEBUG] switch_core_io.c:759 Engaging Read
> Buffer at 480 bytes vs 160
> 2013-07-04 21:23:09.475748 [WARNING] mod_sofia.c:1279 Asynchronous PTIME
> not supported, changing our end from 30 to 20
> 2013-07-04 21:23:09.475748 [DEBUG] sofia_glue.c:3037 Changing Codec from
> PCMU at 30ms@8000hz to PCMU at 20ms@8000hz
> 2013-07-04 21:23:09.535748 [DEBUG] switch_rtp.c:1873 RE-Starting timer
> [soft] 160 bytes per 20ms
> 2013-07-04 21:23:09.535748 [DEBUG] sofia_glue.c:3124 Set Codec
> sofia/internal/sip:1006 at 10.2.2.159:8081 PCMU/8000 20 ms 160 samples 64000
> bits
> 2013-07-04 21:23:09.555751 [DEBUG] switch_core_io.c:1365 Engaging Write
> Buffer at 320 bytes to accommodate 480->320
> 2013-07-04 21:23:12.095748 [DEBUG] mod_spandsp_fax.c:291 FLOW T.30 HDLC
> signal status is Carrier up (-2) in state T
> 2013-07-04 21:23:15.095748 [DEBUG] mod_spandsp_fax.c:291 FLOW T.30 HDLC
> signal status is Carrier down (-1) in state T
> 2013-07-04 21:23:15.155748 [DEBUG] mod_spandsp_fax.c:291 FLOW T.30 HDLC
> signal status is Carrier up (-2) in state T
> 2013-07-04 21:23:15.195750 [DEBUG] mod_spandsp_fax.c:291 FLOW T.30 HDLC
> signal status is Abort (-8) in state T
> 2013-07-04 21:23:15.235749 [DEBUG] mod_spandsp_fax.c:291 FLOW T.30 HDLC
> signal status is Abort (-8) in state T
> 2013-07-04 21:23:15.275748 [DEBUG] mod_spandsp_fax.c:291 FLOW T.30 HDLC
> signal status is Abort (-8) in state T
> 2013-07-04 21:23:15.315750 [DEBUG] mod_spandsp_fax.c:291 FLOW T.30 HDLC
> signal status is Abort (-8) in state T
> 2013-07-04 21:23:15.355748 [DEBUG] mod_spandsp_fax.c:291 FLOW T.30 HDLC
> signal status is Abort (-8) in state T
> 2013-07-04 21:23:15.395748 [DEBUG] mod_spandsp_fax.c:291 FLOW T.30 HDLC
> signal status is Abort (-8) in state T
> 2013-07-04 21:23:15.635748 [DEBUG] mod_spandsp_fax.c:291 FLOW T.30 HDLC
> signal status is Abort (-8) in state T
> 2013-07-04 21:23:15.715751 [DEBUG] mod_spandsp_fax.c:291 FLOW T.30 HDLC
> signal status is Abort (-8) in state T
> 2013-07-04 21:23:15.795749 [DEBUG] mod_spandsp_fax.c:291 FLOW T.30 HDLC
> signal status is Abort (-8) in state T
> 2013-07-04 21:23:15.915751 [DEBUG] mod_spandsp_fax.c:291 FLOW T.30 HDLC
> signal s
>
> **** repeats many times ****
>
> 2013-07-04 21:23:47.035750 [DEBUG] mod_spandsp_fax.c:291 FLOW T.30 HDLC
> signal status is Abort (-8) in state T
> 2013-07-04 21:23:48.115755 [DEBUG] mod_spandsp_fax.c:291 FLOW T.30 HDLC
> signal status is Abort (-8) in state T
> 2013-07-04 21:23:48.135749 [DEBUG] mod_spandsp_fax.c:291 FLOW T.30 HDLC
> signal status is Carrier down (-1) in state T
> 2013-07-04 21:23:49.535749 [DEBUG] mod_spandsp_fax.c:291 FLOW T.30 T0
> expired in state T
> 2013-07-04 21:23:49.535749 [DEBUG] mod_spandsp_fax.c:291 FLOW T.30 Status
> changing to 'Timed out waiting for initial communication'
> 2013-07-04 21:23:49.535749 [DEBUG] mod_spandsp_fax.c:291 FLOW T.30
> Disconnecting
> 2013-07-04 21:23:49.535749 [DEBUG] mod_spandsp_fax.c:291 FLOW T.30
> Changing from phase A_CNG to E
> 2013-07-04 21:23:49.535749 [DEBUG] mod_spandsp_fax.c:291 FLOW FAX Set rx
> type 0
> 2013-07-04 21:23:49.535749 [DEBUG] mod_spandsp_fax.c:291 FLOW FAX Set tx
> type 1
> 2013-07-04 21:23:49.535749 [DEBUG] mod_spandsp_fax.c:291 FLOW T.30
> Changing from state T to B
> 2013-07-04 21:23:50.195748 [DEBUG] mod_spandsp_fax.c:291 FLOW T.30 Send
> complete in phase E, state B
> 2013-07-04 21:23:50.195748 [DEBUG] mod_spandsp_fax.c:511
> ==============================================================================
> 2013-07-04 21:23:50.195748 [DEBUG] mod_spandsp_fax.c:524 Fax processing
> not successful - result (2) Timed out waiting for initial communication.
> 2013-07-04 21:23:50.195748 [DEBUG] mod_spandsp_fax.c:529 Remote station
> id:
> 2013-07-04 21:23:50.195748 [DEBUG] mod_spandsp_fax.c:530 Local station id:
>  SpanDSP Fax Ident
> 2013-07-04 21:23:50.195748 [DEBUG] mod_spandsp_fax.c:531 Pages
> transferred: 0
> 2013-07-04 21:23:50.195748 [DEBUG] mod_spandsp_fax.c:533 Total fax pages:
>   0
> 2013-07-04 21:23:50.195748 [DEBUG] mod_spandsp_fax.c:534 Image resolution:
>  0x0
> 2013-07-04 21:23:50.195748 [DEBUG] mod_spandsp_fax.c:535 Transfer Rate:
>   14400
> 2013-07-04 21:23:50.195748 [DEBUG] mod_spandsp_fax.c:537 ECM status
>   off
> 2013-07-04 21:23:50.195748 [DEBUG] mod_spandsp_fax.c:538 remote country:
> 2013-07-04 21:23:50.195748 [DEBUG] mod_spandsp_fax.c:539 remote vendor:
> 2013-07-04 21:23:50.195748 [DEBUG] mod_spandsp_fax.c:540 remote model:
> 2013-07-04 21:23:50.195748 [DEBUG] mod_spandsp_fax.c:542
> ==============================================================================
> 2013-07-04 21:23:50.195748 [DEBUG] mod_spandsp_fax.c:291 FLOW T.30
> Changing from state B to CALL_FINISHED
> 2013-07-04 21:23:50.195748 [DEBUG] mod_spandsp_fax.c:291 FLOW T.30
> Changing from phase E to CALL_FINISHED
> 2013-07-04 21:23:50.195748 [DEBUG] mod_spandsp_fax.c:291 FLOW FAX Set rx
> type 9
> 2013-07-04 21:23:50.195748 [DEBUG] mod_spandsp_fax.c:291 FLOW FAX FAX
> exchange complete
> 2013-07-04 21:23:50.195748 [DEBUG] mod_spandsp_fax.c:291 FLOW FAX Set tx
> type 9
> 2013-07-04 21:23:50.195748 [DEBUG] mod_spandsp_fax.c:291 FLOW FAX FAX
> exchange complete
> 2013-07-04 21:23:50.215748 [DEBUG] switch_core_codec.c:244 sofia/internal/
> sip:1006 at 10.2.2.159:8081 Restore previous codec PCMU:0.
> 2013-07-04 21:23:50.215748 [NOTICE] switch_core_state_machine.c:262
> sofia/internal/sip:1006 at 10.2.2.159:8081 has executed the last dialplan
> instruction, hanging up.
>
>
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: http://lists.freeswitch.org/pipermail/freeswitch-users/attachments/20130704/03f9c075/attachment-0001.html 


Join us at ClueCon 2011 Aug 9-11, 2011
More information about the FreeSWITCH-users mailing list