[Freeswitch-users] Choice of codecs for incoming call

Brian West brian at freeswitch.org
Sun Feb 3 00:01:55 MSK 2013


You can't reinvite our 200ok has only pcmu so yes it will 488

Sent from my iPhone

On Feb 1, 2013, at 10:56 PM, "Александр Мустафин" <
mustafin.aleksandr at gmail.com> wrote:

 Hello, Steven.

Thank you for reply.

Maybe my DID-provider is buggy, but I've succesfull calls in the other pbx
with the same number.
Short examples below - second example is work.

         FS (1st test)

----> INVITE (PCMU,PCMA)
<---- 100 Trying
<---- 200 OK (PCMU)
----> ACK
----> Re-INVITE (PCMA)
<---- 100 Trying
<---- 488 Not Acceptable Here

         CG (2nd test)

----> INVITE (PCMU,PCMA)
<---- 100 Trying
<---- 200 OK (PCMU, PCMA)
----> ACK
----> Re-INVITE (PCMA)
<---- 100 Trying
<---- 200 OK (PCMA)
----> ACK

02.02.2013 02:41, Steven Ayre пишет:

 How can I manage set of codec in inbound calls?


<X-PRE-PROCESS cmd="set" data="outbound_codec_prefs=PCMU,PCMA,G729,GSM"/>
<X-PRE-PROCESS cmd="set" data="inbound_codec_prefs=PCMU,PCMA,G729,GSM"/>
<param name="inbound-codec-prefs" value="$${inbound_codec_prefs}"/>
<param name="outbound-codec-prefs" value="$${outbound_codec_prefs}"/>

Your previous configuration used the global list for both parameters.

global_codec_prefs isn't actually then used, there's a codec-prefs param
for convenience only that sets both inbound and outbound at the same time
and isn't actually needed if you're setting both.

-Steve



On 1 February 2013 11:18, Александр
Мустафин<mustafin.aleksandr at gmail.com>
<mustafin.aleksandr at gmail.com>wrote:


 Hello.

My FS receive INVITE with 2 codecs in SDP: PCMA and PCMU. After hunting
dialplan, this call forwarding to IVR, and I see next message in log:

2013-01-31 01:23:22.388780 [DEBUG] sofia_glue.c:5094 Audio Codec Compare
[PCMU:0:8000:20:64000]/[PCMU:0:8000:20:64000]
2013-01-31 01:23:22.388780 [DEBUG] sofia_glue.c:3077 Set Codec
sofia/internal/9089080908 at PSTN PCMU/8000 20 ms 160 samples 64000 bits
2013-01-31 01:23:22.388780 [DEBUG] switch_core_codec.c:111
sofia/internal/9089080908 at PSTN Original read codec set to PCMU:0

And FS send 200 OK to remote side with one codec in SDP: PCMU.

My parameters:

In internal.xml (profile)
<param name="inbound-codec-prefs" value="$${global_codec_prefs}"/>
<param name="outbound-codec-prefs" value="$${global_codec_prefs}"/>

In vars.xml
<X-PRE-PROCESS cmd="set"
data="global_codec_prefs=PCMU,PCMA,G729,G722,GSM"/>
<X-PRE-PROCESS cmd="set" data="outbound_codec_prefs=PCMU,PCMA,G729,GSM"/>
<X-PRE-PROCESS cmd="set" data="inbound_codec_prefs=PCMU,PCMA,G729,GSM"/>

This is normal behavior?How can I manage set of codec in inbound calls?

Best regards, Alexander.

_________________________________________________________________________
Professional FreeSWITCH Consulting
Services:consulting at freeswitch.orghttp://www.freeswitchsolutions.com

FreeSWITCH-powered IP PBX: The CudaTel Communication
Server

Official FreeSWITCH
Siteshttp://www.freeswitch.orghttp://wiki.freeswitch.orghttp://www.cluecon.com

FreeSWITCH-users mailing
listFreeSWITCH-users at lists.freeswitch.orghttp://lists.freeswitch.org/mailman/listinfo/freeswitch-users
UNSUBSCRIBE:http://lists.freeswitch.org/mailman/options/freeswitch-usershttp://www.freeswitch.org



_________________________________________________________________________
Professional FreeSWITCH Consulting
Services:consulting at freeswitch.orghttp://www.freeswitchsolutions.com

FreeSWITCH-powered IP PBX: The CudaTel Communication
Server

Official FreeSWITCH
Siteshttp://www.freeswitch.orghttp://wiki.freeswitch.orghttp://www.cluecon.com

FreeSWITCH-users mailing
listFreeSWITCH-users at lists.freeswitch.orghttp://lists.freeswitch.org/mailman/listinfo/freeswitch-users
UNSUBSCRIBE:http://lists.freeswitch.org/mailman/options/freeswitch-usershttp://www.freeswitch.org


_________________________________________________________________________
Professional FreeSWITCH Consulting Services:
consulting at freeswitch.org
http://www.freeswitchsolutions.com




Official FreeSWITCH Sites
http://www.freeswitch.org
http://wiki.freeswitch.org
http://www.cluecon.com

FreeSWITCH-users mailing list
FreeSWITCH-users at lists.freeswitch.org
http://lists.freeswitch.org/mailman/listinfo/freeswitch-users
UNSUBSCRIBE:http://lists.freeswitch.org/mailman/options/freeswitch-users
http://www.freeswitch.org
-------------- next part --------------
An HTML attachment was scrubbed...
URL: http://lists.freeswitch.org/pipermail/freeswitch-users/attachments/20130202/ad863b03/attachment-0001.html 


Join us at ClueCon 2011 Aug 9-11, 2011
More information about the FreeSWITCH-users mailing list